summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2014-06-01ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and ↵Oder Chiou
RT5651 The patch adds the RL6231 class device shared support for RT5640, RT5645 and RT5651. The function of the DMIC clock calculation can be shared by RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01Merge branches 'topic/rt5640', 'topic/rt5645' and 'topic/rt5651' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rl6231
2014-06-01ASoC: wm9713: correct mono out PGA sourcesMatt Reimer
The mono output PGA input only has four possible sources, so omit the rest. Signed-off-by: Matt Reimer <mreimer@sdgsystems.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: cs42l56: Fix new value argument in snd_soc_update_bits callsAxel Lin
The new value argument needs proper shift to match the mask bit fields. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Brian Austin <brian.austin@cirrus.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: tlv320aci3x: Fix custom snd_soc_dapm_put_volsw_aic3x() functionPeter Ujfalusi
For some unknown reason the parameters for snd_soc_test_bits() were in wrong order: It was: snd_soc_test_bits(codec, val, mask, reg); /* WRONG!!! */ while it should be: snd_soc_test_bits(codec, reg, mask, val); Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-05-29ASoC: wm8804: Allow control of master clock divider in PLL generationDaniel Matuschek
WM8804 can run with PLL frequencies of 256xfs and 128xfs for most sample rates. At 192kHz only 128xfs is supported. The existing driver selects 128xfs automatically for some lower samples rates. By using an additional mclk_div divider, it is now possible to control the behaviour. This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow lower jitter and better signal quality. The behavior has to be controlled by the sound card driver, because some sample frequency share the same setting. e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the MCLK divider. Signed-off-by: Daniel Matuschek <daniel@matuschek.net> Tested-by: Florian Meier <florian.meier@koalo.de> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27ASoC: Add ADAU1381/ADAU1781 audio CODEC supportLars-Peter Clausen
This patch adds support for the Analog Devices ADAU1381 and ADAU1781 audio CODECs. The device is a low-power, 24-bit stereo audio CODEC with multiple analog inputs and outputs, two digital microphone inputs and an I2S interface. The device can be controlled either using I2C or SPI. The main difference between the two variants is that the ADAU1781 has a freely programmable SigmaDSP processor, while the ADAU1381 has a fixed function wind noise reduction filter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27ASoC: Add ADAU1361/ADAU1761 audio CODEC supportLars-Peter Clausen
This patch adds support for the Analog Devices ADAU1361 and ADAU1761 CODECs. The device is a a low-power, 24-bit stereo audio CODEC with multiple analog input and outputs, one digital microphone input and an I2S interface. The device can be controlled either via I2C or SPI. The main difference between the two variants is that the ADAU1761 has a built-in SigmaDSP, while the ADAU1361 has not. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27ASoC: Add ADAU1X61 and ADAU1X81 CODECs common codeLars-Peter Clausen
The ADAU1X61 and ADAU1X81 are very similar in the digital domain, but are quite different in the analog domain. This patch adds support for the common parts of the ADAU1X61 and ADAU1X81 CODECs. The patch also restores some of the alphabetical order in the Makfile and Kconfig. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27ASoC: wm_adsp: Use adsp_err/warn instead of dev_err/warnCharles Keepax
We have defines for adsp messages best to consistently use them. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27ASoC: sgtl5000: Fix the cache handlingFabio Estevam
Since commit e5d80e82e32e (ASoC: sgtl5000: Convert to use regmap directly) a kernel oops is observed after a suspend/resume sequence. The kernel oops happens inside sgtl5000_restore_regs() as codec->reg_cache is no longer a valid pointer. Add the remaining register entries into sgtl5000_reg_defaults[] and remove sgtl5000_restore_regs() completely, which allows suspend/resume to work fine and make the code simpler. Tested on a im53-qsb board. Reported-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26ASoC: sirf-audio-codec: Simplify the new bitmask value in regmap_update_bitsAxel Lin
Having the binary ones complement operator in the new bitmak value makes the code hard to read. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26ASoC: max98095: Add master clock handlingTushar Behera
If master clock is provided through device tree, then update the master clock frequency during set_sysclk. Documentation has been updated to reflect the change. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26ASoC: max98090: Add master clock handlingTushar Behera
If master clock is provided through device tree, then update the master clock frequency during set_sysclk. Documentation has been updated to reflect the change. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26ASoC: alc5623: Fix Kconfig dependencyTakashi Iwai
Add "depends on I2C" to shut up the build errors from randconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26ASoC: max98090: Add NI/MI values for user pclk 19.2 MHzChen Zhen
This patch adds the clock divisor and multiplier NI, MI values for audio sampling frequencies 44100 and 48000 Hz and PCLK 19.2 MHz. This is useful for the Odroid X2/U2 boards when the codec works in master mode and its MCLK clock is fed from the I2S CDCLK output. Signed-off-by: Chen Zhen <zhen1.chen@samsung.com> [s.nawrocki@samsung.com: edited the commit description] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-22Merge remote-tracking branches 'asoc/topic/ux500', 'asoc/topic/wm8731', ↵Mark Brown
'asoc/topic/wm8804', 'asoc/topic/wm8955' and 'asoc/topic/wm8985' into asoc-next
2014-05-22Merge remote-tracking branches 'asoc/topic/rt5651', 'asoc/topic/samsung', ↵Mark Brown
'asoc/topic/sgtl5000', 'asoc/topic/sh', 'asoc/topic/simple', 'asoc/topic/sirf', 'asoc/topic/sta350' and 'asoc/topic/tlv320dac33' into asoc-next
2014-05-22Merge remote-tracking branches 'asoc/topic/nuc900', 'asoc/topic/omap', ↵Mark Brown
'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/rt5640' and 'asoc/topic/rt5645' into asoc-next
2014-05-22Merge remote-tracking branches 'asoc/topic/headers', 'asoc/topic/intel', ↵Mark Brown
'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/max98095', 'asoc/topic/mc13783' and 'asoc/topic/multicodec' into asoc-next
2014-05-22Merge remote-tracking branches 'asoc/topic/cs42l56', 'asoc/topic/cs42xx8' ↵Mark Brown
and 'asoc/topic/davinci' into asoc-next
2014-05-22Merge remote-tracking branches 'asoc/topic/ad1980', 'asoc/topic/adsp', ↵Mark Brown
'asoc/topic/ak4104', 'asoc/topic/ak4642', 'asoc/topic/alc5623', 'asoc/topic/arizona', 'asoc/topic/atmel' and 'asoc/topic/cache' into asoc-next
2014-05-22Merge remote-tracking branch 'asoc/topic/pcm512x' into asoc-nextMark Brown
2014-05-22Merge remote-tracking branch 'asoc/topic/enum' into asoc-nextMark Brown
2014-05-22Merge remote-tracking branch 'asoc/topic/component' into asoc-nextMark Brown
2014-05-22Merge remote-tracking branch 'asoc/fix/max98090' into asoc-linusMark Brown
2014-05-22Merge tag 'asoc-v3.15-rc5-drivers' into asoc-linusMark Brown
ASoC: Driver fixes for v3.15 A small set of driver fixes, nothing remarkable in itself or of any relevance outside of the driver. # gpg: Signature made Wed 14 May 2014 12:49:57 BST using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
2014-05-20ASoC: alc5623: Add device tree bindingAndrew Lunn
Let the ALC5623 codec be instantiated from DT. Add a simple binding for the additional control register and the jack detect register. Also, add a prompt to the Kconfig entry for this CODEC, so that it can be selected. Since kirkwood-t5325.c will no longer be used, we need to be able to enable the CODEC in the mvebu_v5_defconfig etc. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-20ASoC: ad1980: Replace goto loop with do-while loopLars-Peter Clausen
Using a proper do-while loop here instead of a open-coded goto loop is both cleaner and shorter. Also fixes the following warnings from smatch: sound/soc/codecs/ad1980.c:213 ad1980_reset() info: loop could be replaced with if statement. sound/soc/codecs/ad1980.c:212 ad1980_reset() info: ignoring unreachable code. sound/soc/codecs/ad1980.c:215 ad1980_reset() info: ignoring unreachable code. While we are at it also change retry_cnt to unsigned int, using u16 for a on-stack loop counter doesn't make that much sense. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-19ASoC: rt5645: Fix updating wrong register for T5645_AIF2 caseAxel Lin
This looks like a copy-paste bug, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-19ASoC: rt5651: Do not use rtd->codecLars-Peter Clausen
rtd->codec does not necessarily point to the CODEC instance for which the callback was called (e.g. for CODEC<->CODEC or multi-CODEC links). Use dai->codec instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-19ASoC: cs42xx8: Do not use rtd->codecLars-Peter Clausen
rtd->codec does not necessarily point to the CODEC instance for which the callback was called (e.g. for CODEC<->CODEC or multi-CODEC links). Use dai->codec instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-16ASoC: max98090: Move microphone bias voltage setting to probe functionJarkko Nikula
Microphone bias level configuration register can configure voltage between 2.2 V and 2.8 V but doesn't manage is voltage on or off. Microphone bias on/off state is controlled by "MICBIAS" DAPM widget. Therefore there is no need to update bias voltage conditionally depending on jack state each time when codec goes to SND_SOC_BIAS_ON state and setting can be moved to max98090_probe() as driver currently doesn't support other levels than 2.8 V. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-16ASoC: max98090: Make sure we configure BCLK in one placeLiam Girdwood
BCL is being configured in two places producing a warning message. Make sure we only configure BCLK once and when we are master. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-16ASoC: max98090: Add ACPI probing supportJarkko Nikula
Add ACPI ID for MAX98090 and ACPI 5 I2C device probing support. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-16ASoC: max98090: Mark cache as dirty prior to restoringLiam Girdwood
Make sure the cache is fully flushed at resume time. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-16ASoC: max98090: Reset codec on resumeLiam Girdwood
Make sure we reset codec and clear any IRQs on resume. This matches the init sequence in probe. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-16ASoC: max98090: Fix reset at resume timeLiam Girdwood
Reset needs to wait 20ms before other codec IO is performed. This wait was not being performed. Fix this by making sure the reset register is not restored with the cache, but use the manual reset method in resume with the wait. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-05-16ASoC: max98090: Fix digital sidetone gain TLVLiam Girdwood
TLV for digital sidetone volume is wrong, this fix matches it to the datasheet. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-14Merge remote-tracking branches 'asoc/fix/audmux', 'asoc/fix/cs42l52', ↵Mark Brown
'asoc/fix/fsl-esai', 'asoc/fix/fsl-spdif', 'asoc/fix/rcar', 'asoc/fix/tlv320aic31xx' and 'asoc/fix/wm8962' into asoc-linus
2014-05-14ASoC: ak4642: Add support for extended sysclk frequencies of the ak4648Sascha Hauer
Additionally to the ak4642 pll frequencies the ak4648 also supports 13MHz, 19.2MHz and 26MHz. This adds support for these frequencies. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-14ASoC: ak4642: Add driver data and driver private structSascha Hauer
Currently unused, this is done to let the driver distinguish between the different supported codec types in later patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-14ASoC: ak4642: Add ALC controlsSascha Hauer
ALC and ALC Zero crossing detection has been enabled unconditionally. Add controls for this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-14ASoC: ak4642: Fix typo zoro -> zeroSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-13ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatileCharles Keepax
The register CLASS_D_CONTROL_1 is marked as volatile because it contains a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1 register. This causes problems for the "Speaker Switch" control, which will report an error if the CODEC is suspended because it relies on a volatile register. To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and manually keep the register cache in sync by updating both bits when changing the mute status. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-05-12ASoC: rt5640: add default case for unexpected IDBard Liao
We may read an unexpected value when detemining which codec is attached. In that case, either a unsupported codec is attached or something wrong with I2C. The driver will not work properly on both cases. So we return an error for that. Signed-off-by: Bard Liao <bardliao@realtek.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08ASoC: rt5645: fix coccinelle warningsOder Chiou
Return statements in functions returning bool should use true/false instead of 1/0. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08ASoC: rt5645: Correct the cache sync functionOder Chiou
The patch corrects the cache sync function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08ASoC: rt5645: Move settings from probe() to reg_default structOder Chiou
The patch moves the private register settings from probe() to reg_default struct. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08ASoC: rt5645: Staticise non-exported symbolsOder Chiou
The patch is for staticising non-exported symbols Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-14 04:12:35 +0000