summaryrefslogtreecommitdiff
path: root/sound/soc/intel
AgeCommit message (Collapse)Author
2016-08-15ASoC: Intel: bytcr_rt5640: fix dai/clock setup for SSP0 routingPierre-Louis Bossart
SSP0 uses 16 bits 2ch, SSP2 24 bits 2ch Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt56040: additional routing quirksPierre-Louis Bossart
Allow for all possible combinations of SSP0,SSP2, AIF1, AIF2 combination (only one at a time) Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: add SSP2_AIF2 routingPierre-Louis Bossart
Add quirk to model routing on Baytrail-CR devices Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: atom: enable configuration of SSP0Pierre-Louis Bossart
Existing code used SSP2, make selection of SSP id dependent on port name. This is required when the machine driver uses non-default settings Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: Atom: add definitions for modem/SSP0 interfacePierre-Louis Bossart
The Atom DPCM driver only allowed for the SSP2 interface, add definitions for modem/SSP0. These definitions might be used to route audio to a codec connected to SSP0 (instead of a modem in traditional usages), but there is a restriction to 2ch I2S. SSP2 is capable of handling up to 4 slot TDM. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: Atom: auto-detection of Baytrail-CRPierre-Louis Bossart
BYT-CR needs special handling to deal with BIOS issues. For some reason the IPC interrupt index is also modified from the Baytrail-T reference. Use PUNIT BIOS config bits to infer platform details. Assume regular Baytrail configs if status is incorrect or CONFIG_IOSF_MBI is not enabled. SSP0 routing issues are solved without dedicated firmware in following patches Tested on Asus T100TA and T100TAF. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: enable differential mic quirkPierre-Louis Bossart
Some Baytrail-CR devices rely on analog mics connected with differential pairs and not the single-ended default Add quirk and enable it for T00TAF Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: quirk for mono speakerPierre-Louis Bossart
Some Baytrail devices only have a mono speaker, add quirk and enable it for T100TAF. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr-rt5640: add Asus T100TAF quirksPierre-Louis Bossart
Add quirk based on DMI string matching Also fix matching to use DMI_EXACT_MATCH otherwise T100TA and T100TAF will be using same quirk Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-12ASoC: Intel: Skylake: Fix error return code in skl_probe()Wei Yongjun
Fix to return error code -ENODEV from the error handling case instead of 0, as done elsewhere in this function. Fixes: 87b2bdf02278 ("ASoC: Intel: Skylake: Initialize NHLT table") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-By: Vinod Koul <vinod.kou@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-10ASoC: Intel: Skylake: remove module id query at runtimeVinod Koul
Now that we have balanced loading of the topology file and split of init and fw_init and fill module data during asoc probe. So remove it from runtime, but keep error check in case things fall apart. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-10ASoC: Intel: Skylake: Populate modules after loadingVinod Koul
Once topology and firmware are loaded, we can parse the manifest. Use driver pipe and widget list to get list of all modules and populate the data. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-10ASoC: Intel: Skylake: modify snd_skl_get_module_info argsDharageswari R
snd_skl_get_module_info() takes skl_dfw_module as an argument. The users then updates the topology data, so instead pass skl_module_cfg and let snd_skl_get_module_info() fill that up. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-09Merge branch 'topic/hda-link-time' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-intel
2016-08-09ALSA: convert users to core bus_parse_capabilitiesVinod Koul
Now that we have the bus parse capabilities moved to core, we need to convert users. The SKL driver and HDA extended lib needs to converted in single patch, otherwise we regress on the functionality. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-08ASoC: Intel: Skylake: Add module processing domain supportSenthilnathan Veppur
A module can be scheduled in deferent processing domains in DSP. Topology specifies the module domain. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: Fix a comment styleVinod Koul
While changing code notice bad comment style, so fix it up. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: Add library loading supportRamesh Babu
The library load is added as one of the ops in skl_dsp_fw_ops(). The manifest load gives the files to be loaded which are loaded during the fw_init() Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Kranthi G <gudishax.kranthikumar@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: fix noderef.cocci warningskbuild test robot
sound/soc/intel/skylake/skl-topology.c:480:24-30: ERROR: application of sizeof to pointer sizeof when applied to a pointer typed expression gives the size of the pointer Generated by: scripts/coccinelle/misc/noderef.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: Add library loading IPCsRamesh Babu
DSP fw can have additional firmwares as libs. These libs can be loaded using message IPC_GLB_LOAD_LIBRARY. Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Kranthi G <gudishax.kranthikumar@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Bxt: Parse UUIDs onceVinod Koul
The firmware manifest contains UUIDs which needs to be passed only once. So use the newly introduced is_first_boot flag to distinguish and parse these only once on bxt platform as well. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: Parse UUIDs onceVinod Koul
The firmware manifest contains UUIDs which needs to be passed only once. So use the newly introduced is_first_boot flag to distinguish and parse these only once. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: add additional args to module parsingSenthilnathan Veppur
For additional library parsing, we need to pass firmware to be loaded and not use the pointer in context. Also, Library module IDs are combination of library index and module ID in manifest. So add the additional arguments of firmware and library offset to snd_skl_parse_uuids(). Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: add support for tplg manifest loadKranthi G
Topology manifest gives information about the libraries to be loaded. Implement the topology manifest load callback to get this. Signed-off-by: Kranthi G <gudishax.kranthikumar@intel.com> Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: split fw and dsp initializationVinod Koul
The DSP instance creation also loads the firmware on DSPs. For library load the firmware names come from topology so can't be loaded at object creation. So split the firmware load and object creation. FW load is now called after topology init in platform probe. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: modify skl_get_dsp_ops()Vinod Koul
To query the ops used for a platform, we use skl_get_dsp_ops() which return index and then we load the ops. Rather than this return the ops, this way it cna be used later to query the ops in rest of the driver. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: Move modules query to runtimeVinod Koul
Since we are moving DSP init to later, at the topology load the module info is not available. So set the module id to -1 at init and query at first module initialization. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-01ASoC: Intel: Skylake: Check list empty while getting module infoVinod Koul
Module list can be NULL so check if the list is empty before accessing the list. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown
2016-07-24ASoC: Intel: Skylake: Delete an unnecessary check before the function call ↵Markus Elfring
"release_firmware" The release_firmware() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24ASoC: Intel: Skylake: Fix NULL Pointer exception in dynamic_debug.Vedang Patel
The following bug was reported by sometime back: https://lkml.org/lkml/2016/6/29/795 This commit fixes this bug by setting value for the prefix string. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Fix conflicting pcm dev drvdata on haswellBen Zhang
soc-core sets the snd_soc_pcm_runtime->dev drvdata to snd_soc_pcm_runtime in soc_post_component_init, and access it in places like codec_reg_show. hsw_pcm_open overwrites the drvdata to point to hsw_pcm_data, confusing soc-core, and causing crashes when cat /sys/devices/pci0000:00/INT3438:00/.../System PCM/codec_reg This patch removes the set in hsw_pcm_open since it's no longer used. commit 7ff9d6714a5c ("ASoC: Intel: Split hsw_pcm_data for playback and capture") already removed all calls to snd_soc_pcm_get_drvdata(rtd). Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: board: add kabylake nau88l25_ssm4567 machine idVinod Koul
Like SKL we have skl_nau88l25_ssm4567 machine for KBL, so add the ID for this machine too. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: board: add kabylake nau88l25_max98357a machine idVinod Koul
Like SKL we have skl_nau88l25_max98357a machine for KBL, so add the ID for this machine too. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Kbl: add kabylake additional machine entriesVinod Koul
Like SKL, we have two more machines for KBL, so add these IDs Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Skylake: reduce machine name for skl_nau88l25_max98357aVinod Koul
The platform device id table expects names to be less that 20chars, so truncate the name in skl id table and skl_nau88l25_max98357a machine. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Skylake: reduce machine name for skl_nau88l25_ssm4567Vinod Koul
The platform device id table expects names to be less that 20chars, so truncate the name in skl id table and skl_nau88l25_ssm4567 machine. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Skylake: Fix fw reload failureSenthilnathan Veppur
FW reload had two issues: - We need to disable the core 0 on when fw fails - Before loading firmware mark boot flag as false This patch fixes these two Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: Intel: board: add kabylake machine idVinod Koul
Kabylake platform is similar to Skylake. So, add machine id. Since same machine driver supports both, add these in id table. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: Intel: add kablake device IDsVinod Koul
Kabylake is next generation Intel platform which has similar audio controller to Skylake, so add the ID and driver data in SKL driver. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: Intel: atom: fix missing breaks that would cause the wrong operation ↵Alan Cox
to execute Now we correctly error an attempt to execute an unsupported operation. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: Intel: Skylake: Initialize module list for BroxtonVinod Koul
The module list was not initialized for Broxton DSP code, so initialize it. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: intel: Fix sst-dsp dependency on dw stuffTakashi Iwai
The recent commit [a92ea59b74e2: ASoC: Intel: sst: only select sst-firmware when DW DMAC is built-in] introduced more strict kconfig dependency (depends on DW_DMAC_CORE=y) for avoiding the build failures due to dependency messes in intel-sst. This makes, however, it impossible to use this driver with the modularized systems, i.e. typically on Linux distros. The problem addressed in the commit above is that sst_dsp_new() and sst_dsp_free() includes the firmware init / finish that call dw_*() functions. Thus building it as built-in with DW_DMAC_CORE module results in the missing symbols. However, these sst_dsp functions are basically called only from the drivers that depend on DW_DMAC_CORE already. That is, once when these functions are split out, the rest can be independent from dw stuff. This patch attempts to solve the issue by the following: - Split sst-dsp stuff into two modules: snd-soc-sst-dsp and snd-soc-sst-firmware. - Move sst_dsp_new() and sst_dsp_free() to the latter module so that the former module can be independent from DW_DMAC_CORE. - Add a new kconfig SND_SOC_INTEL_SST_FIRMWARE to select the latter module by machine drivers. One only remaining pitfall is that each machine driver has to select SND_SOC_INTEL_SST_FIRMWARE carefully depending on DW_DMAC_CORE. This can't be done cleanly due to the restriction of the current kbuild. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=988117 Fixes: a92ea59b74e2 ('ASoC: Intel: sst: only select sst-firmware when DW DMAC is built-in') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: atom: statify cht_quirkVinod Koul
Sparse rightly warns: sound/soc/intel/atom/sst/sst_acpi.c:353:22: warning: symbol 'cht_quirk' was not declared. Should it be static? So statify this Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: cht: fix uninit variable warningVinod Koul
Kbuild bot reports that we might use dai_index uninitialized. sound/soc/intel/boards/cht_bsw_rt5645.c:391:37: warning: 'dai_index' may be used uninitialized in this function [-Wmaybe-uninitialized] Since it is theoretically possible, set it while initializing. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: Skylake: Fix to use the actual size for TLV controlDharageswari R
DSP expects the actual length of parameters that is set through TLV to be passed in large config set, so pass the actual size received in tlv_control_set() instead of max size. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: Add surface3 entry in CHT-RT5645 machineVinod Koul
Surface3 device is a CHT machine, so add entry for it. Also update the HID from BIOS. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001 Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: Atom: Add quirk for Surface 3Vinod Koul
Surface 3 is CHT based device which shows up with RT5645 codec. But the BIOS reports ACPI ID as 5640! To solve this, add a DMI overide for cht-5640 machine. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001 Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-27ASoC: Intel: Skylake: Increase loglevel of debug messages.Vedang Patel
There is log spam while doing playback, record or reloading the audio firmware. print_hex_dump uses printk(KERN_DEBUG,... which is different from dev_dbg used elsewhere in the driver: it's always enabled at compile-time. Change it to print_hex_dump_debug for logging consistency. For consistency with other log statements, change dev_info to dev_dbg for a kernel print which is frequently printed by the driver. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-27ASoC: Intel: common: increase the loglevel of "FW Poll Status".Vedang Patel
For consistency with other log statements, change dev_info to dev_dbg for a kernel print which is frequently printed by the driver. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 11:58:38 +0000