summaryrefslogtreecommitdiff
path: root/sound/soc/intel
AgeCommit message (Collapse)Author
2017-03-15ASoC: Intel: Skylake: Fix module load when module size > DMA buffer sizeJeeja KP
When module size > DMA buffer size, driver copies first chunk and waits for the BDL complete interrupt. BDL complete interrupt never occurs and wait time expires as module load IPC is not send to start the DMA from DSP. To fix the above issue need to follow the below steps: 1. After copying the first chunk, send the module load IPC to start the DMA. 2. Wait for the BDL interrupt. Once interrupt is received, copy the next chunk. 3. Continue step 2 till all bytes are copied. 4. When all the bytes are copied (bytes_left = 0), wait for module load IPC response 5. Handled module load IPC response messages, check the load module IPC response and wake up the thread to complete module load. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Remove get dsp_ops in cleanup routineG Kranthi
dsp ops is already set in init, so use this in cleanup routine instead of again retrieving it. Also constify struct skl_dsp_ops. Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Disable notifications at boot after DSP FW initG Kranthi
DSP firmware sends notification every 1ms, which is disabled in runtime suspend. But if a system has no runtime pm, we keep getting notification, so disable after FW init as well. Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Remove BE prepare opsJeeja KP
Remove BE prepare ops which enables MCLK by default. If MCLK is required to be enabled for any specific platform, it needs to be enabled in the corresponding machine driver. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: bxtn: Reload the firmware in case of D3 failureJeeja KP
If D3 IPC fails or times out, firmware needs to be reloaded as driver continues the reset. So set the fw_load flag to false to reload the firmware in D0. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: bxtn: Update DSP core state in D0Jeeja KP
In system suspend, firmware needs to be re-downloaded as IMR is cleared. When firmware is downloaded in D0, core state is not set to running state causing instability with subsequent D0-D3 cycles. So set the core state correctly during D0 and check the DSP core state if not in reset to set the DSP to D3. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: bxtn: Disable interrupt when DSP is in D3Jeeja KP
When DSP is in D3, no interrupts are expected, so disable interrupt while entering D3. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Fix not to stop src pipe in pre pmd event handlerGuneshwor Singh
If the widget is a mixin module, just unbind between source and sink and don't stop the source pipe as there can be multiple sinks connected. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Fix to delete DSP pipe after stopping pipeJeeja KP
DSP pipe needs to stopped before deleting the pipe. Currently check is for pipe state > STARTED, which is incorrect. So changed to include pipe state STARTED to stop the pipe if it started. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: Enable bytcht_nocodec machine driverPierre-Louis Bossart
Make sure this machine driver is only used if enabled explicitly and if there is no information found in the SSDT. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: boards: add card for MinnowBoardMax/Up I2S accessPierre-Louis Bossart
Add card with dummy codec and DAI to make I2S signals observable. Uses Mic and Speaker pins/widgets to control DAPM Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: Atom: enable BYT/CHT+DA7213 machine driverPierre-Louis Bossart
Add entries in HID table and reference to bytcht_da7213 driver Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: add machine driver for BYT/CHT + DA7213Pierre-Louis Bossart
Add new machine driver, tested with Ard-Audio-DA7212 [1] connected to MinnowBoardMAX Turbot. The MCLK is managed by the codec driver using the "mclk" handle to reuse existing code, but it could just as well be handled by this machine driver. [1] http://www.dialog-semiconductor.com/content/ard-audio-da7212 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: Skylake: code cleanup for pin fixup limitationTakashi Sakamoto
As a commit 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") describes, 'fixups is applied to pin 0 only'. On the other hand, the commit left some codes as what they were. This might confuses readers. This commit fixes the issue. This doesn't change driver behaviour at all. Fixes: 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08ASoC: Intel: Skylake: use a helper macro to rounding-up calculationTakashi Sakamoto
In 'include/linux/kernel.h', there's a helper macro to round numerical value. Let's use it. Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: Skylake: fix invalid memory access due to wrong reference of ↵Takashi Sakamoto
pointer In 'skl_tplg_set_module_init_data()', a pointer to 'params' member of 'struct skl_algo_data' is calculated, then casted to (u32 *) and assigned to a member of configuration data. The configuration data is passed to the other functions and used to process intel IPC. In this processing, the value of member is used to get message data, however this can bring invalid memory access in 'skl_set_module_params()' as a result of calculation of a pointer for actual message data. (sound/soc/intel/skylake/skl-topology.c) skl_tplg_init_pipe_modules() ->skl_tplg_set_module_init_data() (has this bug) ->skl_tplg_set_module_params() (sound/soc/intel/skylake/skl-messages.c) ->skl_set_module_params() ((char *)param) + data_offset This commit fixes the bug. Fixes: abb740033b56 ("ASoC: Intel: Skylake: Add support to configure module params") Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> # v4.5+
2017-03-07ASoC: Intel: bxtn: optimize ROM init retriesJeeja KP
During S3->S0 transition, sometime ROM init fails because of authentication engine loads later than the OS. In this case driver waits for a longer period and then retries the FW download causing huge delay in resume time of audio device. To avoid this, ROM INIT wait time is set to a optimal value and increased the retries for firmware download. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: bxtn: Store the FW/Library context at bootJeeja KP
Store the DSP firmware/library at boot, so that for S3 to S0 transition use the stored ctx for downloading the firmware to DSP memory. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: bdw-rt5677: Use devm_gpiod_get()Andy Shevchenko
Since index is always 0 replace devm_gpiod_get_index() by devm_gpiod_get() and apply proper flags. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: Skylake: fix spelling mistake: "allocationf" -> "allocation"Colin Ian King
Trivial fix to spelling mistake in dev_err message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-19Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown
2017-02-19Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown
2017-02-17ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Add Geminlake IDsVinod Koul
Geminilake is next gen SoC, so add the IDs for Geminilake. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Check device type to get endpoint configurationSenthilnathan Veppur
Geminilake has two different devices connected to the same SSP, so use device_type check to get correct device configuration. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Add jack port initialize in rt286 machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: bxt: Create ASoC jack for hdmi in bxt_da7219_max98357 machineJeeja KP
Creates ASoC jack for HDMI PCM and calls hdmi codec API to initialize jack in bxt_da7219_max98357 machine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: bxt: Create ASoC jack for hdmi in bxt_rt298 machineJeeja KP
Creates ASoC jack for HDMI PCM and calls hdmi codec API to initialize jack in bxt_rt298.c machine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Create ASoC jack for hdmi in nau88l25_ssm4567 machineJeeja KP
Creates ASoC jack for HDMI PCM and calls hdmi codec API to initialize jack in skl_nau88l25_ssm4567 machine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Create ASoC jack for hdmi in skl_nau88l25_max98357a ↵Jeeja KP
machine Creates ASoC jack for HDMI PCM and calls hdmi codec API to initialize jack in skl_nau88l25_max98357a machine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Create ASoC jack for hdmi in rt286 machineJeeja KP
Creates ASoC jack for HDMI pcm and calls hdmi codec API to initialize jack in skl_rt268 machine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-08ASoC: Intel: Skylake: Add route change to nau88l25_ssm4567 machineJeeja KP
To support MST moved pin to port, this changes the routes based on port. So change the route in nau88l25_ssm4567 machine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-08ASoC: Intel: Skylake: Add route change to nau88l25_max98357a machineJeeja KP
To support MST moved pin to port, this changes the routes based on port. So change the route in nau88l25_max98357a machine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-08ASoC: Intel: bxt: Add route change to rt298 machineJeeja KP
To support MST moved pin to port, this changes the routes based on port. So change the route in bxt_rt298 machine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-04ASoC: Intel: Skylake: Report Platform ID info from NHLTSubhransu S. Prusty
This patch create entry in sysfs file system to report the platform_id = "pci-id-oem_id-oem_table_id-oem_revision" for board identification. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Sodhi, VunnyX <vunnyx.sodhi@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-04ASoC: Intel: bxt: add channel map support in bxt_da7219_max98357a machineJeeja KP
HDMI registers channel map controls per PCM. As PCMs are not registered during dai_link init callback, store the pcm ids and codec DAIs during this init callback. Register for late probe and call the jack_init API which also registers channel map in the late probe callback handler. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-04ASoC: Intel: bxt: Add route change to da7219_max98357a machineJeeja KP
To support MST moved pin to port, this changes the routes based on port. So change the route in bxt_da7219_max98357a machine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-04ASoC: Intel: Skylake: Add route change to rt286 machineJeeja KP
To support MST moved pin to port, this changes the routes based on port. So change the route in skl_rt286 machine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-04ASoC: Intel: bxt: add channel map support in rt298 machineJeeja KP
HDMI registers channel map controls per pcm. As PCMs are not registered during dai_link init callback, store the pcm ids and codec DAIs during this init callback. Register for late probe and call the jack_init API which registers channel map in the late probe callback handler. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-01ASoC: cht-bsw-rt5645: fix unused variable compiler warningPierre-Louis Bossart
Missed unused variable in previous changes, oops. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: cht-bsw-rt5645: fix DAI formatsPierre-Louis Bossart
Remove default and set I2S mode correctly both on codec and cpu sides Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: add support for ALC3270 codecPierre-Louis Bossart
Use ACPI ID 10EC3270 to load machine driver for cht-bsw-rt5645 and add reference to 3270 to use the rt5645 mode Tested on Asus T100HA Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: cht-bsw-rt5645: select ASRC source based on routing quirkPierre-Louis Bossart
Some platforms use AIF2, use routing information to set ASRC as needed Suggested-by: Bard Liao <bardliao@realtek.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: cht-bsw-rt5645: add quirks for SSP0/AIF1/AIF2 routingPierre-Louis Bossart
This driver may be used on Baytrail CR platforms where SSP2 is not available. Add quirks and routing detection based on work done for RT5640. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: Baytrail: add quirk for Lenovo Thinkpad 10Pierre-Louis Bossart
the BIOS reports this codec as RT5640 but it's a rt5670. Use the quirk mechanism to use the cht_bsw_rt5672 machine driver Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: cht_bsw_rt5645: harden ACPI device detectionPierre-Louis Bossart
Fix classic issue of having multiple codecs listed in DSDT but a single one actually enabled. The previous code did not handle such errors and could also lead to uninitalized configurations Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: Atom: add machine driver for baytrail-rt5645 hardwarePierre-Louis Bossart
Use machine driver initially defined for CherryTrail Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 07:08:31 +0000