summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2014-07-08ALSA: hda - add capture mute led support in led_power_filterHui Wang
Now the led_power_filter() needs to handle 3 situations: - only mute_led_nid is set - only cap_mute_led_nid is set - both mute_led_ind and cap_mute_led_nid are set BugLink: https://bugs.launchpad.net/bugs/1329580 Cc: David Henningsson <david.henningsson@canonical.com> Cc: Kailang Yang <kailang@realtek.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-08ALSA: hda - fix a typo by changing mute_led_nid to cap_mute_led_nidHui Wang
BugLink: https://bugs.launchpad.net/bugs/1329580 Cc: David Henningsson <david.henningsson@canonical.com> Cc: Kailang Yang <kailang@realtek.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-08ALSA: hda - Add new GPU codec ID 0x10de0070 to snd-hdaAaron Plattner
Vendor ID 0x10de0070 is used by a yet-to-be-named GPU chip. Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-07ASoC: max98090: Fix build warningThierry Reding
The max98090_{suspend,resume}() functions are used for system sleep and therefore need to be guarded by CONFIG_PM_SLEEP rather than CONFIG_PM. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ASoC: RT286: Fix silent at the beginning of streamBard Liao
This patch fix the issue that the output is almost silent at the beginning of starting a playback. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ALSA: hda: Fix build warningThierry Reding
The hda_tegra_disable_clocks() function is only used by the suspend and resume code, so it needs to be included in the #ifdef CONFIG_PM_SLEEP block to prevent the following warning: CC sound/pci/hda/hda_tegra.o sound/pci/hda/hda_tegra.c:238:13: warning: 'hda_tegra_disable_clocks' defined but not used [-Wunused-function] static void hda_tegra_disable_clocks(struct hda_tegra *data) ^ Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-07ASoC: RT286: move initial settings to _i2c_probeBard Liao
Move codec initial settings from asoc probe to i2c probe. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ASoC: RT286: check ID in i2c levelBard Liao
Move ID check from asoc level to i2c level. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ASoC: RT286: remove test codeBard Liao
Remove test code. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ALSA: hda - Add several entries for enabling HP mute ledHui Wang
BugLink: https://bugs.launchpad.net/bugs/1329580 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-07ASoC: rt5677: Modify the voltage level in the BIAS OFF stageOder Chiou
The patch modifies the voltage level in the BIAS OFF stage Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ASoC: rt5677: Remove the redundant definition in head fileOder Chiou
The patch removes the redundant definition in head file Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ALSA: hda - Fix and neaten print_nid_path/debug_badnessJoe Perches
print_nid_path has a possible buffer overflow if struct nid_path.path values are > 256. Avoid this and neaten the output to remove the leading ':' Neaten debug_badness to always verify arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-05ASoC: s6105-ipcam: Fix build for I2C dependenciesMark Brown
The s6105-ipcam driver calls i2c_register_board_info() which means that not only does it need I2C to be enabled to be built but since that symbol is not exported it means that the driver also can't be linked as a module. Use a bool instead of a tristate and add a dependency on I2C to fix these issues. Commit b5dd60fd263 (ASoC: s6000: Allow to build when COMPILE_TEST is enabled) made this problem more visible since it enabled build of the driver on more common architectures but this has always been an issue. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: samsung: Make card name for Snow configurableTushar Behera
Snow sound-card driver supports multiple boards with different audio codecs. Updating the sound card name per board basis would provide some more information to the end-user. Signed-off-by: Tushar Behera <tushar.b@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: max98090: Remove redundant max98090_handle_pdata()Tushar Behera
max98090_handle_pdata() is not doing anything other than printing a message if pdata is not valid. This can be removed. Signed-off-by: Tushar Behera <tushar.b@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: max98090: Add check for CODEC typeTushar Behera
CODEC type (MAX98090/MAX98091) can be specified from device-tree file, it can also be obtained from the CODEC during runtime. Add an explicit check to figure out if both are matching, else print a message warning about the same. Signed-off-by: Tushar Behera <tushar.b@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: samsung: Correct I2S DAI suspend/resume opsSylwester Nawrocki
We should save/restore relevant I2S registers regardless of the dai->active flag, otherwise some settings are being lost after system suspend/resume cycle. E.g. I2S slave mode set only during dai initialization is not preserved and the device ends up in master mode after system resume. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-07-04ASoC: sirf: provide pm-runtime functions when neededArnd Bergmann
The newly introduced sirf-usp driver defines sirf_usp_pcm_{suspend,resume} functions only when PM_RUNTIME is enabled, but also uses them when that is disabled and only PM_SLEEP is turned on, resulting in this error: ../sound/soc/sirf/sirf-usp.c: In function 'sirf_usp_pcm_suspend': ../sound/soc/sirf/sirf-usp.c:308:3: error: implicit declaration of function 'sirf_usp_pcm_runtime_suspend' [-Werror=implicit-function-declaration] sirf_usp_pcm_runtime_suspend(dev); ^ ../sound/soc/sirf/sirf-usp.c: In function 'sirf_usp_pcm_resume': ../sound/soc/sirf/sirf-usp.c:319:3: error: implicit declaration of function 'sirf_usp_pcm_runtime_resume' [-Werror=implicit-function-declaration] ret = sirf_usp_pcm_runtime_resume(dev); ^ cc1: some warnings being treated as errors To fix that, this patch changes the #ifdef to CONFIG_PM, which is enabled when at least one of PM_SLEEP or PM_RUNTIME are enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: s6105-ipcam: Automatically disconnect non-connected pinsLars-Peter Clausen
All CODEC input and output widgets are either in the DAPM routing table or manually marked as non-connected. This means the card is fully routed and we can let the core take care of disconnecting non-connected pins. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: s6000: Allow to build when COMPILE_TEST is enabledLars-Peter Clausen
Most of the ASoC s6000 code is architecture independent. This patch makes it possible to select the platform when COMPILE_TEST is enabled. The only architecture dependent code is the PCM driver which will still only be selected if XTENSA_VARIANT_S6000 is enabled. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: s6000-i2s: Fix s6000_i2s_remove() return typeLars-Peter Clausen
The platform_driver remove callback return type is int not void. Fixes the following warning: sound/soc/s6000/s6000-i2s.c:604:19: warning: incorrect type in initializer (different base types) sound/soc/s6000/s6000-i2s.c:604:19: expected int ( *remove )( ... ) sound/soc/s6000/s6000-i2s.c:604:19: got void ( static [toplevel] *<noident>)( ... ) Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ALSA: pcm_dmaengine: Correct support for 24bits physical sample widthsPeter Ujfalusi
In case of _3LE/_3BE formats the samples are stored in 3 consecutive bytes without padding it to 4 bytes. This means that the DMA needs to be able to support 3 bytes word length in order to read/write the samples from memory correctly. Originally the code treated 24 bits physical length samples as they were 32 bits which leads to corruption when playing or recording audio. The hw.formats field has already been prepared to exclude formats not supported by the DMA engine in use, which means that only on platforms where 3 bytes is supported by the DMA will be able to use this format. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: generic-dmaengine-pcm: Prepare formats mask for valid physical sample ↵Peter Ujfalusi
sizes Based on the dma_slave_caps's addr_widths queried from the dma driver prepare the hw.formats mask to include only formats which is supported by the DMA engine. In case the dma driver does not implement the slave_caps the default assumption is that it supports 1, 2 and 4 bytes widths. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ALSA: pcm_dmaengine: Use the available wrapper to get physical widthPeter Ujfalusi
params_physical_width() is available via pcm_params.h Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: add RT286 CODEC driverBard Liao
This patch adds Realtek ALC286 codec driver. ALC286 is a dual mode codec, which can run as HD-A or I2S mode. It is controlled by HD-A verb commands via I2C protocol. The following is the I/O difference between ALC286 and general I2S codecs. 1. A HD-A verb command contains three parts, NID, VID, and PID. And an I2S command contains only two parts: address and data. 2. Not only the register address is written, but the read command also includes the entire write command. 3. rt286 uses different registers for read and write the same bits. We map verb command to regmap structure. However, we read most registers from cache to prevent the asymmetry read/write issue in rt286. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: wm_adsp: Add missing MODULE_LICENSEPraveen Diwakar
Since MODULE_LICENSE is missing the module load fails, so add this for module. Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-07-04ALSA: ice1712: Correcting/completing #defines for REGSKonstantinos Tsimpoukas
This small patch completes #defines for Control/Status Register, adds comments for the missing ones there and on the Interrupt Mask Register and additionally corrects "#define ICE1712_SERR_LEVEL 0x04 -> 0x08", according to documentation. Signed-off-by: Konstantinos Tsimpoukas <kostaslinuxxx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-04Merge branch 'for-linus' into for-nextTakashi Iwai
Conflicts: sound/pci/hda/hda_intel.c
2014-07-04ALSA: hda - restore BCLK M/N value as per CDCLK for HSW/BDW display HDA ↵Mengdong Lin
controller For HSW/BDW display HD-A controller, hda_set_bclk() is defined to set BCLK by programming the M/N values as per the core display clock (CDCLK) queried from i915 display driver. And the audio driver will also set BCLK in azx_first_init() since the display driver can turn off the shared power in boot phase if only eDP is connected and M/N values will be lost and must be reprogrammed. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-03ASoC: wm8996: Remove unused variableSachin Kamat
'ret' is not used in the function. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-03ASoC: wm8350: Remove unused variableSachin Kamat
'irq' is not used in the function. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-03ASoC: twl4030: Remove unused variableSachin Kamat
'status' is not used in the function. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-03ASoC: adau1701: fix adau1701_reg_read()Daniel Mack
Fix a long standing bug in the read register routing of adau1701. The bytes arrive in the buffer in big-endian, so the result has to be shifted before and-ing the bytes in the loop. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-07-03ASoC: sirf: Add audio usp interface driverRongjun Ying
This patch adds ASoC support for SiRF SoCs USP interface. Features include: 1. Only support slave mode. 2. Support I2S and DSP_A mode. 3. Support S16_LE, S24_LE and S24_3LE formats. 4. Support stereo and mono mode. 5. The biggest Support is 192Khz sample rate. Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-03ASoC: tas5086: add regulator consumer supportDaniel Mack
The TAS5086 has two power domains, DVDD and AVDD. Enable them both as long as the codec is in use. Also, switch on the power to identify the chip at device probe level, and switch it off again afterwards. The codec level will take care for power handling later. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-02ASoC: core: Move non-shared code paths out of snd_soc_post_component_init()Lars-Peter Clausen
There are two call sites for snd_soc_post_component_init(), one passes 0 and the other 1 for the 'dailess' parameter of snd_soc_post_component_init(). Depending on whether 'dailess' is 0 or 1 snd_soc_post_component_init() runs different code at the beginning and the end of the function. The patch moves this conditional code out of snd_soc_post_component_init() and into the call sites. This removes the need for snd_soc_post_component_init() to know whether it is called for a DAI link or a aux dev. Also do the initialization of rtd->card when the rtd struct is allocated. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-02ASoC: core: Bind aux devs earlyLars-Peter Clausen
Currently in snd_soc_instantiate_card() we only check if the aux dev exists, but do not yet assign it to its rtd. This means that we need to lookup the aux dev again in soc_probe_aux_dev(). This patch changes the behavior to assign the aux dev to the rtd in soc_check_aux_dev() (and renames it to soc_bind_aux_dev()). This simplifies the implementation a bit and also removes the need for soc_post_component_init() to know about the specific CODEC that was assigned to the rtd. The later is necessary for componentization as the code should work for all types of components not just CODECs. This new behavior is also more in sync with how soc_bind_dai_link()/soc_probe_link_dais() works. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-02ASoC: core: Replace soc_find_matching_codec() with soc_find_codec()Lars-Peter Clausen
soc_find_matching_codec() works in the same way as soc_find_codec() except that it only works for auxdevs. It can easily be replaced by the generic soc_find_codec(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-02ASoC: core: Remove duplicated rtd->codec initializationLars-Peter Clausen
rtd->codec is already initialized in soc_bind_dai_link(), so there is no need to do it again in soc_dai_link_init(). Removing the rtd->codec initialization from soc_dai_link_init() also removes the need for soc_dai_link_init() to know about the CODEC at all. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-02ASoC: add RT5670 CODEC driverBard Liao
This patch adds a minimum support of Realtek ALC5670 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-02ASoC: rsnd: add DT support to DVCKuninori Morimoto
Now, DVC can use DT Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-02ASoC: rsnd: DMA start address is properly used for each DMACKuninori Morimoto
R-Car sound uses Audio DMAC and Audio DMAC peri peri. Audio DMAC peri peri transfers data inside circuit. DMA transfer needs source / destination address, and destination address can be set via dmaengine_slave_config(). The source address can be set when starting DMAEngine. Because Audio DMAC peri peri always ignores its value, current driver always used same source address for Audio DMAC / Audio DMAC peri peri (Audio DMAC peri peri source / destination address is always fixed value) But, This is not good match for DT booting. This patch properly uses DMA start address for Audio DMAC / Audio DMAC peri peri. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-02ASoC: rsnd: DMA cleanup for flexible SSI/SRC selectionKuninori Morimoto
Current R-Car sound SSI/SRC/DVC selection has feature limit. (It is assuming that SSI/SRC are using same index number) So that enabling SSI/SRC flexible selection, this patch modifies DMA settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01ASoC: pcm: Refactor soc_pcm_apply_msb for multicodecsBenoit Cousson
Refactor the function to facilitate the migration to multiple codecs. Fix a trailing space in the header as well. No functional change. Signed-off-by: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01ASoC: core: Change soc_link_dai_widgets signature for multiple codecsBenoit Cousson
Since multiple codecs DAI will be usable in the future, remove explicit unique codec_dai and cpu_dai parameters. Replace them with snd_soc_pcm_runtime pointer that will contain every instances. No functionale change. Signed-off-by: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01ALSA: hda: Remove unused variableSachin Kamat
'status' is not used in the function. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Tested-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-01ALSA: mixart: Remove unused variableSachin Kamat
'err' is not used in the function. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-01ALSA: echoaudio: Remove unused variableSachin Kamat
'chip' is not used in the function. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-01ALSA: hda - Fix build error in hda_tegra.cTakashi Iwai
The "list" field has been omitted from struct azx, but its initialization remained mistakenly in hda_tegra.c, which leads to a compile error: sound/pci/hda/hda_tegra.c: In function 'hda_tegra_create': sound/pci/hda/hda_tegra.c:481:22: error: 'struct azx' has no member named 'list' Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 9a34af4a3327 ('ALSA: hda - Move more PCI-controller-specific stuff from generic code') Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-19 00:31:50 +0000