summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2015-12-21ALSA: fm801: save context before suspend devicesAndy Shevchenko
In symmetry we save context first before suspend and restore it last after resume. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-21ALSA: fm801: no need to suspend absent codecAndy Shevchenko
In case of tuner only card there is no need to take care of the codec which is anyway absent. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-21ALSA: fm801: detect FM-only card earlierAndy Shevchenko
If user does not supply tea575x_tuner parameter the driver tries to detect the tuner type. The failed codec initialization is considered as FM-only card present, however the driver still registers an IRQ handler for it. Move codec detection earlier to set tea575x_tuner parameter before check. Here the following functions are introduced reset_coded() resets AC97 codec snd_fm801_chip_multichannel_init() initializes cards with multichannel support Fixes: 5618955c4269 (ALSA: fm801: move to pcim_* and devm_* functions) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-21ALSA: fm801: propagate TUNER_ONLY bit when autodetectedAndy Shevchenko
The commit d7ba858a7f7a (ALSA: fm801: implement TEA575x tuner autodetection) brings autodetection to the driver. However the autodetection algorithm misses the TUNER_ONLY bit if it is supplied by the user. Thus, user gets weird messages and no card registered. snd_fm801 0000:0d:01.0: detected TEA575x radio type SF64-PCR snd_fm801 0000:0d:01.0: AC'97 interface is busy (1) snd_fm801 0000:0d:01.0: AC'97 interface is busy (1) ... snd_fm801 0000:0d:01.0: AC'97 0 does not respond - RESET snd_fm801 0000:0d:01.0: AC'97 interface is busy (1) snd_fm801 0000:0d:01.0: AC'97 interface is busy (1) snd_fm801 0000:0d:01.0: AC'97 0 access is not valid [0x0], removing mixer. snd_fm801: probe of 0000:0d:01.0 failed with error -5 Do a copy of TUNER_ONLY bit to be applied after autodetection is done. Fixes: d7ba858a7f7a (ALSA: fm801: implement TEA575x tuner autodetection) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-21Merge branch 'topic/hdmi-jack' into for-nextTakashi Iwai
2015-12-21Merge tag 'v4.4-rc6' into develLinus Walleij
Linux 4.4-rc6
2015-12-20ALSA: fm801: store struct device instead of pci_devAndy Shevchenko
There is no need to store struct pci_dev in struct fm801. Generic struct device can be easily translated to struct pci_dev whenever it's needed, in particular for one user for now. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-20ALSA: fm801: put curly braces around empty if-bodyAndy Shevchenko
The compiler complains on unused condition as follows sound/pci/fm801.c: In function ‘snd_fm801_interrupt’: sound/pci/fm801.c:585:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Put the curly braces around empty body as suggested. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-20ALSA: fm801: convert rest outw() / inw() to use helpersAndy Shevchenko
The patch introduces two new helpers fm801_iowrite16() and fm801_ioread16() to write and read the registers by offset. Previously similar was done to access the hardware registers by their names. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-20ALSA: fm801: explicitly free IRQ lineAndy Shevchenko
Otherwise we will have a warning on ->remove() since device is a PCI one. WARNING: CPU: 4 PID: 1411 at /home/andy/prj/linux/fs/proc/generic.c:575 remove_proc_entry+0x137/0x160() remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'snd_fm801' Fixes: 5618955c4269 (ALSA: fm801: move to pcim_* and devm_* functions) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-20ALSA: oss: consolidate kmalloc/memset 0 call to kzallocNicholas Mc Guire
This is an API consolidation only. The use of kmalloc + memset to 0 is equivalent to kzalloc. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-19ASoC: rt5616: add rt5616 codec driverBard Liao
This is the initial codec driver for rt5616. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoC: Intel: Atom: flip logic for gain SwitchPierre-Louis Bossart
The upstreamed code modified the control names from Mute to Switch without changing the logic. To get audio working the Switch needs to be off which isn't aligned with normal ALSA conventions. Inverting the logic now so that Switch Off means mute and Switch On means active audio using the specific volume setting. Signed-off-by: Sebastien Guiriec <sebastien.guiriec@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoC: Intel: Atom: clean-up compressed DAI definitionPierre-Louis Bossart
the fields channels_min, channels_max, rate and formats are irrelevant for compressed playback, they will depend on the content. This was probably a copy-paste mistake to have them in the first place Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoC: Intel: Atom: add 24-bit support for media playback and capturePierre-Louis Bossart
DSP firmware supports 24-bit data, expose functionality to userspace/apps. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoC: Intel: boards: add DEEP_BUFFER support for BYT/CHT/BSWPierre-Louis Bossart
Add dai links to enable additional playback stream with deeper buffer for lower power consumption. The normal and DEEP_buffer streams are not mutually exclusive, content will be mixed by the DSP. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoc: Intel: Atom: add deep buffer definitions for atom platformsPierre-Louis Bossart
Add definitions for MERR_DPCM_DEEP_BUFFER AND PIPE_MEDIA3_IN Add relevant cpu-dai and dai link names Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoC: Intel: tag byt-rt5640 machine driver as deprecatedPierre-Louis Bossart
All the functionality was merged in DPCM-based driver, keep older driver to avoid breaking userspace but tag it as unsupported/deprecated Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoC: Intel: boards: merge DMI-based quirks in bytcr-rt5640 driverPierre-Louis Bossart
Merge DMI quirks for various machines such as Asus T100 and clean-up code Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoC: Intel: boards: start merging byt-rt5640 driversPierre-Louis Bossart
first renaming and reducing delta with byt-rt5640 code before dmi-based quirks are enabled Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoC: Intel: boards: align pin names between byt-rt5640 driversPierre-Louis Bossart
initial cleanup to use same pins Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoC: Intel: bytcr_rt5640: set SSP to I2S mode 2chSebastien Guiriec
Using the hw_fixup function in order to overwrite the default SSP setting for Audio DSP port connected to the codec. Instead of TDM 4ch use I2S 2ch 24 bits. Signed-off-by: Sebastien Guiriec <sebastien.guiriec@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: Intel: Skylake: Fix to set pipe state to invalid when deletingJeeja KP
When pipeline is deleted, set the pipeline state to invalid state. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: Intel: Skylake: Clear stream registers before stream setupJeeja KP
This patch adds clean up routine to clear the stream registers and calls this routine before setting up stream registers. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: fsl_sai: fix no frame clk in master modeZidan Wang
After several open/close sai test with ctrl+c, there will be I/O error. The SAI can't work anymore, can't recover. There will be no frame clock. With adding the software reset in trigger stop, the issue can be fixed. This is a hardware bug/errata and reset is the only option. According to the reference manual, the software reset doesn't reset any control register but only internal hardware logics such as bit clock generator, status flags, and FIFO pointers. (Our purpose is just to reset the clock generator while the software reset is the only way to do that.) Since slave mode doesn't use the clock generator, only apply the reset procedure to the master mode. For asynchronous mode, TX will not be reset when RX is still running. In this case, i can't reproduce this issue. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: rsnd: add rsnd_parse_connect_common() and remove complex macroKuninori Morimoto
Current rsnd driver is using complex macro to parse DAI connection. This patch adds new rsnd_parse_connect_common() and replace current macro to it. This is prepare for multi channel support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: rsnd: add rsnd_set_slot() / rsnd_get_slot_num()Kuninori Morimoto
TDM will use 6 or 8 slots on 1 SSI, and Multi channel will use 6 or 8 slots on few SSI (each SSI uses 2 slots). Thus, this adds new slot control functions which can be prepare for Multi channel support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: rsnd: tidyup rsnd_get_slot_xxx() namingKuninori Morimoto
rsnd_get_slot_rdai() returns total slots (it returns 6 if total 6 channels) , and rsnd_get_slot_extend() returns extended SSI width (it returns 8 if total 6 channels). This will be used on SSI multi channel support too (It will return 2 if total 6 channels with 3 SSI). But, it is using confusable naming. This patch changes rsnd_get_slot_rdai() -> rsnd_get_slot(), rsnd_get_slot_extend() -> rsnd_get_slot_width() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: rsnd: remove rsnd_get_slot_runtime()Kuninori Morimoto
Current Renesas sound driver is using rsnd_get_slot_runtime(), but it is same as runtime->channels. This patch removes rsnd_get_slot_runtime() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: rsnd: SSI/SSIU use rsnd_get_slot_extend() to check TDMKuninori Morimoto
Current SSI/SSIU are using rsnd_get_slot_runtime() to check TDM, but using rsnd_get_slot_extend() is more sane. This patch fix it up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: rsnd: rsnd_dai_connect() returns error if it connect to existing modKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: rsnd: tidyup debug print position on rsnd_dma_attach()Kuninori Morimoto
It can't output corrent dma name *before* rsnd_mod_init(). It goes to *after* rsnd_mod_init() by this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: rsnd: tidyup return value of rsnd_get_adinr_bit()Kuninori Morimoto
Renesas sound driver has rsnd_get_adinr_bit/chan() functions. It is assuming _bit() returns ADINR :: OTBL, and _chan() returns ADINR :: CHNUM. Current _bit() returns both OTBL and CHNUM. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: rsnd: fixup SSIU control timingKuninori Morimoto
SSIU should be controlled after SSI. This patch fix up it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()Xiong Zhang
It takes three minutes to enter into hibernation on some OEM SKL machines and we see many codec spurious response after thaw() opertion. This is because HDA is still in D0 state after freeze() call and pci_pm_freeze/pci_pm_freeze_noirq() don't set D3 hot in pci_bus driver. It seems bios still access HDA when system enter into freeze state, HDA will receive codec response interrupt immediately after thaw() call. Because of this unexpected interrupt, HDA enter into a abnormal state and slow down the system enter into hibernation. In this patch, we put HDA into D3 hot state in azx_freeze_noirq() and put HDA into D0 state in azx_thaw_noirq(). V2: Only apply this fix to SKL+ Fix compile error when CONFIG_PM_SLEEP isn't defined [Yet another fix for CONFIG_PM_SLEEP ifdef and the additional comment by tiwai] Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-18ASoc: Intel: boards: Add HDMI/DP links for nau88l25_ssm4567 machineFang, Yang A
This machine supports HDMI/DP ports so add these ports and its FE and BE DAIlinks Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoc: Intel: boards: Add WOV as sink for nau88l25_ssm4567 machineSathyanarayana Nujella
We have WOV module which should act as DAPM sink, so add that and its links. Also rename the refcap to "Wake On Voice" as some user expect to find this name Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoc: Intel: boards: update constraints for nau88l25_ssm4567 machineYong Zhi
We have specific constraints for FE device (48KHz, stereo, 16 bits) and fixups for BE DMIC links (2 or 4 ch), so add those. Also add one more FE DAIlink for dmiccap Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoc: Intel: boards: update ignore suspend for nau88l25_ssm4567 machineYong Zhi
We don't support ignore suspend on few devices so remove that. Also since we support ignore susend on PDM DMIC, add that Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoc: Intel: boards: fix dapm map of nau88l25_ssm4567 machineFang, Yang A
The DAPM map for DMIC and SSP was not properly done, so fix that up. Also mark machine as fully routed Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: Intel: Skylake: Add Nuvoton Maxim machine driverRohit Ainapure
This adds Skylake I2S machine driver which uses NAU88L25 as anlog codec and MAX98357A as speakers Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: Intel: Add Nuvoton+Maxim machine driver entryRohit Ainapure
Add the NAU88L25 + MAX98357A machine driver entry into the machine table Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: wm8974: add devicetree supportMans Rullgard
This adds devicetree support to the wm8974 codec driver. With a DT-based kernel, there is no board-specific setting to select the driver so allow it to be manually chosen. Signed-off-by: Mans Rullgard <mans@mansr.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: max98357a: Add ACPI ID for MaximRohit Ainapure
Adding ACPI ID "MX98357A" for the MAXIM 98357A amp. Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: atmel-pdmic: add the Pulse Density Modulation Interface ControllerSongjun Wu
Add driver for the Pulse Density Modulation Interface Controller. It comes with digitallly controlled gain, a High-Pass and a SINCC filter. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-17ASoC: rsrc-card: tidyup dai format for DPCMKuninori Morimoto
rsrc-card is DPCM supported version of simple-card. Thus it has similar DT format. OTOH, snd_soc_dai_link requests cpu/codec, but one of them will be snd-soc-dummy in DPCM case, and DPCM requests frontend/backend dai_link. This means it might have multi backend/codec. And, SND_SOC_DAIFMT_xxx is based on "codec". Because of these difference, current rsrc card can't detect correct dai_fmt. This patch detect correct dai fmt from 1st "codec". Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-17ASoC: rsrc-card: Remove support for setting differing DAI formatsKuninori Morimoto
1efb53a220 ("ASoC: simple-card: Remove support for setting differing DAI formats") removed set_fmt support from simple-card. rsrc-card follows same style, because it is based on simple-card. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-17ASoC: rsrc-card: enable to use tdm_slot on DTKuninori Morimoto
Renesas sound driver will use tdm slot on TDM Multi Mode support. This patch enables tdm slot on rsrc card driver on DT. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-17ASoC: sgtl5000: fix VAG power up timingJean-Michel Hautbois
When power up, a "pop" is heard on line-in and mic-in. An analysis of the PCM shows it lasts ~400ms and looks like a filter response. VAG power up should be delayed by 400ms as VAG power down is. Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-17ASoC: wm_adsp: Mimic legacy behaviour of reading controls when DSP is onCharles Keepax
Older firmwares don't specify access flags for the controls, unfortunately the usage of some of these firmware relies on being able to read back values from the DSP. The current control code will only do this for volatile controls. This patch will read the control from the hardware if no flags are specified and the control is currently enabled, which should cover these legacy use-cases. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-28 16:11:23 +0000