| Age | Commit message (Collapse) | Author |
|---|
|
Use the regmap_write() for software reset in fsl_sai_config_disable would
cause the FSL_SAI_CSR_BCE bit to be cleared. Refer to
commit 197c53c8ecb34 ("ASoC: fsl_sai: Don't disable bitclock for i.MX8MP")
FSL_SAI_CSR_BCE should not be cleared. So need to use regmap_update_bits()
instead of regmap_write() for these bit operations.
Fixes: dc78f7e59169d ("ASoC: fsl_sai: Force a software reset when starting in consumer mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250807020318.2143219-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
- Support for ASoC AMD ACP 7.2 with new IDs
- ASoC Intel AVS and SOF fixes
- Yet more kconfig adjustments for HD-audio codecs
- TAS2781 codec fixes
- Fixes for longstanding (rather minor) bugs in Intel LPE audio and
USB-audio drivers
* tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/cirrus: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/hdmi: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/realtek: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/ca0132: Fix missing error handling in ca0132_alt_select_out()
ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies
ALSA: hda/tas2781: Support L"SmartAmpCalibrationData" to save calibrated data
ALSA: intel_hdmi: Fix off-by-one error in __hdmi_lpe_audio_probe()
ALSA: hda/realtek: add LG gram 16Z90R-A to alc269 fixup table
ALSA: usb-audio: Don't use printk_ratelimit for debug prints
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCC SKU
ASoC: tas2781: Fix the wrong step for TLV on tas2781
ASoC: amd: acp: Add SoundWire SOF machine driver support for acp7.2 platform
ASoC: amd: acp: Add SoundWire legacy machine driver support for acp7.2 platform
ASoC: amd: ps: Add SoundWire pci and dma driver support for acp7.2 platform
ASoC: SOF: amd: Add sof audio support for acp7.2 platform
ASoC: Intel: avs: Fix uninitialized pointer error in probe()
ASoC: wm8962: Clear master mode when enter runtime suspend
ASoC: SOF: amd: acp-loader: Use GFP_KERNEL for DMA allocations in resume context
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The split of Cirrus HD-audio codec driver may confuse users when
migrating from the previous kernel configs and leave the needed
drivers disabled. Although we've already set y as default, it's still
safer to paper over the wrong choices.
This patch marks the prompt of split CS420x and CS421x codec drivers
with CONFIG_EXPERT, so that they are all enabled when the top-level
CONFIG_SND_HDA_CODEC_CIRRUS is set.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
This patch adds the missing help text to the top-level
CONFIG_SND_HDA_CIRRUS_CODEC together with the explanation of
individual choices, and corrects the help texts that don't fit well
nowadays, too.
Fixes: 1cb8744a36c7 ("ALSA: hda/cirrus: Split to cs420x and cs421x drivers")
Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250806192541.21949-4-tiwai@suse.de
|
|
The split of HDMI codec driver may confuse users when migrating from
the previous kernel configs and leave some drivers disabled
unexpectedly. Although we've already set y to all HDMI codec drivers
as default, it's still safer to paper over the wrong choices.
This patch marks the prompt of each HDMI codec driver with
CONFIG_EXPERT, so that they are all enabled when the top-level
CONFIG_SND_HDA_CODEC_HDMI is set.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
The patch also adds the missing help text to the top-level
CONFIG_SND_HDA_CODEC_HDMI together with the explanation of individual
choices, too.
Fixes: 73cd0490819d ("ALSA: hda/hdmi: Split vendor codec drivers")
Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250806192541.21949-3-tiwai@suse.de
|
|
The split of Realtek HD-audio codec driver may cause confusions
especially when migrating from the previous kernel configurations
because it's hard to know which driver to be enabled.
Although we've already set default=y for those codec drivers, it may
still make people changing the stuff unnecessarily without knowing its
side effect.
This patch is for avoiding such pitfalls by marking the prompt of each
Realtek codec driver with CONFIG_EXPERT. For "normal" users (that is,
unless CONFIG_EXPERT is set), all Realtek HD-audio codecs are enabled
together with CONFIG_SND_HDA_CODEC_REALTEK; this is the very same
situation like the previous kernels, after all.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
The patch also adds the missing help text to the top-level
CONFIG_SND_HDA_CODEC_REALTEK together with the explanation of
individual choices, too.
Fixes: aeeb85f26c3b ("ALSA: hda: Split Realtek HD-audio codec driver")
Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250806192541.21949-2-tiwai@suse.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
This is a relatively small set of fixes and device quirks that came in
during the merge window, the AMD changes adding support for ACP 7.2
systems are all just adding IDs for the devices rather than any
substantial code - the actual code is the same as for prior versions of
the platform.
|
|
There are a couple of cases where the error is ignored or the error
code isn't propagated in ca0132_alt_select_out(). Fix those.
Fixes: def3f0a5c700 ("ALSA: hda/ca0132 - Add quirk output selection structures.")
Link: https://patch.msgid.link/20250806094423.8843-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The hda-sdw-bpt code links against the soundwire driver, but that fails when
trying to link from built-in code into loadable module:
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_close_stream.isra.0':
intel_ace2x.c:(.text+0x137a531): undefined reference to `hda_sdw_bpt_close'
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_send_async':
intel_ace2x.c:(.text+0x137aa45): undefined reference to `hda_sdw_bpt_open'
x86_64-linux-ld: intel_ace2x.c:(.text+0x137ab67): undefined reference to `hda_sdw_bpt_close'
x86_64-linux-ld: intel_ace2x.c:(.text+0x137ac30): undefined reference to `hda_sdw_bpt_send_async'
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_wait':
intel_ace2x.c:(.text+0x137aced): undefined reference to `hda_sdw_bpt_wait'
Ensure that both SOUNDWIRE_INTEL and SND_SOF_SOF_HDA_SDW_BPT are selected
at the same time by SND_SOC_SOF_INTEL_LNL, and that this happens even if
SND_SOC_SOF_INTEL_SOUNDWIRE is a loadable module but SND_SOC_SOF_INTEL_LNL
is built-in.
This follows the same logic as commit c5a61db9bf89 ("ASoC: SOF: fix
intel-soundwire link failure").
Fixes: 5d5cb86fb46e ("ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250805160451.4004602-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices save the calibrated data into L"CALI_DATA", and others into
L"SmartAmpCalibrationData". Driver code will support both.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250805070945.524-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In __hdmi_lpe_audio_probe(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in one character less
being copied from 'card->shortname' to 'pcm->name'.
Use the destination buffer size instead to ensure the card name is
copied correctly.
Cc: stable@vger.kernel.org
Fixes: 75b1a8f9d62e ("ALSA: Convert strlcpy to strscpy when return value is unused")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250805234156.60294-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Several months ago, Joshua Grisham submitted a patch [1]
for several ALC298 based sound cards.
The entry for the LG gram 16 in the alc269_fixup_tbl only matches the
Subsystem ID for the 16Z90R-Q and 16Z90R-K models [2]. My 16Z90R-A has a
different Subsystem ID [3]. I'm not sure why these IDs differ, but I
speculate it's due to the NVIDIA GPU included in the 16Z90R-A model that
isn't present in the other models.
I applied the patch to the latest Arch Linux kernel and the card was
initialized as expected.
[1]: https://lore.kernel.org/linux-sound/20240909193000.838815-1-josh@joshuagrisham.com/
[2]: https://linux-hardware.org/?id=pci:8086-51ca-1854-0488
[3]: https://linux-hardware.org/?id=pci:8086-51ca-1854-0489
Signed-off-by: Thomas Croft <thomasmcft@gmail.com>
Link: https://patch.msgid.link/20250804151457.134761-2-thomasmcft@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
printk_ratelimit is deprecated, since it shares state with all other
printk sites. Additionally, the suppression message is printed at
warning level even though the actual messages are printed at debug and
are (usually) invisible! This can result in thousands of messages like
retire_capture_urb: 4992 callbacks suppressed
in the console, and can inhibit debugging since it is unclear what the
source of the suppressed callbacks is.
Switch to dev_dbg_ratelimited which doesn't print anything unless debug
is enabled.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250801154710.739464-1-sean.anderson@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
|
|
Merge series from Venkata Prasad Potturu <venkataprasad.potturu@amd.com>:
This patch series is to add legacy and sof audio support
for acp7.2 platform.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"For catching up the remaining stuff for 6.17: only small updates and
the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations can
be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix"
* tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: usb: scarlett2: Fix missing NULL check
mips: Update HD-audio configs again
LoongArch: Update HD-audio codec configs
arm: Update HD-audio configs again
selftests: ALSA: fix memory leak in utimer test
ALSA: usb-audio: Add DSD support for Comtrue USB Audio device
ALSA: hda/hdmi: Enable drivers as default
ALSA: hda/cirrus: Enable drivers as default
ALSA: hda/realtek: Enable drivers as default
ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
ALSA: hda: Fix the wrong register was used for DVC of TAS2770
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
ASoC: codecs: Add acpi_match_table for aw88399 driver
ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc
ASoC: imx-card: Add WM8524 support
ASoC: fsl_xcvr: get channel status data with firmware exists
ASoC: fsl_xcvr: get channel status data when PHY is not exists
ASoC: SDCA: Add support for -cn- value properties
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and driver updates:
- Core: handling of nesting irqs to outside the lock, stream
parameters handing on port prep failures.
- AMD driver support for ACP 7.2 platforms and improved handing of
slave alerts and resume sequences
- Qualcomm updating driver debug spew
- Intel BPT message length limitations, rt721 codec as wake capable
etc"
* tag 'soundwire-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: Add support for acp7.2 platform
soundwire: stream: restore params when prepare ports fail
soundwire: debugfs: move debug statement outside of error handling
soundwire: amd: add check for status update registers
soundwire: intel_auxdevice: add rt721 codec to wake_capable_list
soundwire: Correct some property names
soundwire: update Intel BPT message length limitation
soundwire: intel_ace2.x: Use str_read_write() helper
soundwire: amd: cancel pending slave status handling workqueue during remove sequence
soundwire: amd: serialize amd manager resume sequence during pm_prepare
soundwire: qcom: demote probe registration printk
ASoC: cs42l43: Remove unnecessary work functions
soundwire: Move handle_nested_irq outside of sdw_dev_lock
MAINTAINERS: Remove Sanyog Kale as reviewer on SoundWire
|
|
Add DMI quirk entry for Alienware systems with SKU "0CCC" to enable
proper speaker codec configuration (SOC_SDW_CODEC_SPKR).
This system requires the same audio configuration as some existing Dell systems.
Without this patch, the laptop's speakers and microphone will not work.
Signed-off-by: Peter Jakubek <peterjakubek@gmail.com>
Link: https://patch.msgid.link/20250731172104.2009007-1-peterjakubek@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add SoundWire SOF machine driver support for acp7.2 platform.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250801062207.579388-5-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add SoundWire legacy machine driver support for acp7.2 platform.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250801062207.579388-4-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add SoundWire pci and dma driver support for acp7.2 platform.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250801062207.579388-3-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add pci revision id to support sof audio for acp7.2 platfom.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250801062207.579388-2-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
scarlett2_input_select_ctl_info() sets up the string arrays allocated
via kasprintf(), but it misses NULL checks, which may lead to NULL
dereference Oops. Let's add the proper NULL check.
Fixes: 8eba063b5b2b ("ALSA: scarlett2: Simplify linked channel handling")
Link: https://patch.msgid.link/20250731053714.29414-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The vendor Comtrue Inc. (0x2fc6) produces USB audio chipsets like
the CT7601 which are capable of Native DSD playback.
This patch adds QUIRK_FLAG_DSD_RAW for Comtrue (VID 0x2fc6), which enables
native DSD playback (DSD_U32_LE) on their USB Audio device. This has been
verified under Ubuntu 25.04 with JRiver.
Signed-off-by: noble.yang <noble.yang@comtrue-inc.com>
Link: https://patch.msgid.link/20250731110614.4070-1-noble228@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Like other HD-audio codec drivers, HD-audio HDMI codec driver was
split to multiple drivers, and now users are forced to choose the
right kconfig items.
For smoother upgrade path, keep the previous CONFIG_SND_HDA_CODEC_HDMI
as the meuconfig, so that the kconfig can be taken over from the
previous config. The all belonging HDMI codec drivers are enabled as
default as long as CONFIG_SND_HDA_CODEC_HDMI is set.
This is only about the default config, and each driver can be still
disabled if user wants to reduce the size, too.
The kconfig for the generic HDMI driver is changed to
CONFIG_SND_HDA_CODEC_HDMI_GENERIC along with this action.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250730064639.25617-4-tiwai@suse.de
|
|
Like HD-audio Realtek drivers, Cirrus Logic HD-audio codec driver was
split to multiple drivers, too, and now users are forced to choose the
right kconfig items.
For smoother upgrade path, keep the previous
CONFIG_SND_HDA_CODEC_CIRRUS as the menuconfig.
The new kconfig CONFIG_SND_HDA_CODEC_CS42* are enabled as default, as
long as CONFIG_SND_HDA_CODEC_CIRRUS is set, so that the system with
Cirrus codec can keep working.
This is only about the default config, and each driver can be still
disabled if user wants to reduce the size, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250730064639.25617-3-tiwai@suse.de
|
|
The recent split of Realtek HD-audio driver forced users to choose the
right Kconfigs, but most users have no idea which ones to enable.
Although the distros tend to enable all of them, individual users may
have their own favorites and miss something needed via the version
upgrade.
For smoother upgrade path from the previous kernel configuration, now
we take the following changes:
- CONFIG_SND_HDA_CODEC_REALTEK (which is a menuconfig) is changed from
bool to tristate again, so that it can take over from the previous
config gracefully.
- CONFIG_SND_HDA_CODEC_ALC* receive "default y", so that they are
enabled as default as long as CONFIG_SND_HDA_CODEC_REALTEK is set.
Those can be still disabled if users want to reduce the size, too.
At least this allows users to run "make oldconfig" and push RETURN
blindly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250730064639.25617-2-tiwai@suse.de
|
|
If pcim_request_all_regions() fails, error path operates on
uninitialized 'bus' pointer. Found out by Coverity static analyzer.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250730124906.351798-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The enabled master mode causes power consumption to increase in idle
state. Clear the MSTR bit in runtime supsend and recover it in runtime
resume to reduce power.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250730064054.3006409-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
My friend have Victus 16-d1xxx with board ID 8A26, the existing quirk
for Victus 16-d1xxx wasn't working because of different board ID
Tested on Victus 16-d1015nt Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250729181848.24432-4-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-S0063NT Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250729181848.24432-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide cleanup of struct cycle_counter const annotations.
The initial idea of making them const was correct as they were
seperate instances. When they got embedded into larger data
structures, which are even modified by the callback this got moot. The
only reason why this went unnoticed is that the required
container_of() casts the const attribute forcefully away.
Stop pretending that it is const"
* tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/timecounter: Fix the lie that struct cyclecounter is const
|
|
The wrong register was used for digital volume control of TAS2770,
The definition was changed, and usage was also updated.
Fixes: ab29b3460c5c ("ALSA: hda: Add TAS2770 support")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250729145849.55057-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Replace GFP_ATOMIC with GFP_KERNEL for dma_alloc_coherent() calls. This
change improves memory allocation reliability during firmware loading,
particularly during system resume when memory pressure is high. Because
of using GFP_KERNEL, reclaim can happen which can reduce the probability
of failure.
Fixes memory allocation failures observed during system resume with
fragmented memory conditions.
snd_sof_amd_vangogh 0000:04:00.5: error: failed to load DSP firmware after resume -12
Fixes: 145d7e5ae8f4e ("ASoC: SOF: amd: add option to use sram for data bin loading")
Fixes: 7e51a9e38ab20 ("ASoC: SOF: amd: Add fw loader and renoir dsp ops to load firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://patch.msgid.link/20250725190254.1081184-1-usama.anjum@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More updates for v6.17
A few more updates, mostly fixes and device IDs plus some small
enhancements for the FSL xcvr driver.
|
|
During communication with Focusrite Scarlett Gen 2/3/4 USB audio
interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(),
snd_usb_ctl_msg() which can cause initialisation and control
operations to fail intermittently.
This patch adds up to 5 retries in scarlett2_usb(), with a delay
starting at 5ms and doubling each time. This follows the same approach
as the fix for usb_set_interface() in endpoint.c (commit f406005e162b
("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")),
which resolved similar -EPROTO issues during device initialisation,
and is the same approach as in fcp.c:fcp_usb().
Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Closes: https://github.com/geoffreybennett/linux-fcp/issues/41
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/aIdDO6ld50WQwNim@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-r1xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250725151436.51543-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add acpi_match_table to the aw88399 driver so that
it can be used on more platforms.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20250725094602.10017-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
There is two different cases for getting channel status data:
1. With PHY exists, there is firmware running on M core, the firmware
should fill the channel status to RAM space, driver need to read them
from RAM.
2. Without PHY, the channel status need to be obtained from registers.
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
A small chain with some patches that seem to have got lost in the
process. One small additional bug fix for the regmap callbacks, and one
small feature addition for the control parsing.
Charles Keepax (2):
ASoC: SDCA: Fix some holes in the regmap readable/writeable helpers
ASoC: SDCA: Add support for -cn- value properties
include/sound/sdca_function.h | 14 ++---
sound/soc/sdca/sdca_functions.c | 99 +++++++++++++++++++++------------
sound/soc/sdca/sdca_regmap.c | 29 ++++++++--
3 files changed, 92 insertions(+), 50 deletions(-)
--
2.39.5
|
|
WM8524 is a stereo DAC. Add support for this codec in imx-card ASoC
machine driver.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20250723073725.787844-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.17
There's a few new drivers here and quite a lot of cleanup work from
Morimoto-san but generally this has been quite a quiet release,
resulting in a fairly small diffstat. Highlights include:
- Refactoring of the Kconfig menus to be hopefully more consistant and
easier to navigate.
- Refactoring of the DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers.
- Removal of the unused upstream weak paths DAPM functionality.
- Further work on the generic handling for SoundWire SDCA devices.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI TAS5753.
|
|
Merge the last-piece from 6.16 devel branch to sync the code base.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For the XCVR module on i.MX95, even though it only supports SPDIF, the
channel status needs to be obtained from RAM space, which is processed
by firmware. Firmware is necessary to trigger the FSL_XCVR_IRQ_NEW_CS
interrupt.
This change also applies for the SPDIF & ARC function on i.MX8MP which
has the firmware.
Fixes: e6a9750a346b ("ASoC: fsl_xcvr: Add suspend and resume support")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250710030405.3370671-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no PHY for the XCVR module on i.MX93, the channel status needs
to be obtained from FSL_XCVR_RX_CS_DATA_* registers. And channel status
acknowledge (CSA) bit should be set once channel status is processed.
Fixes: e240b9329a30 ("ASoC: fsl_xcvr: Add support for i.MX93 platform")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250710030405.3370671-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Many of the DisCo properties that specify Control values have an
additional variant that specifies a separate value for each Control
Number. Add support for these.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250718135432.1048566-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current regmap readable/writeable helper functions always
allow the Next flag and allows any Control Number. Mask the Next
flag based on SDCA_ACCESS_MODE_DUAL which is the only Mode that
supports it. Also check that the Control Number is valid for
the given control.
Fixes: e3f7caf74b79 ("ASoC: SDCA: Add generic regmap SDCA helpers")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250718135432.1048566-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A few device specific fixes, none especially remarkable though all
useful.
|
|
Add TAS2770 support in TI's HDA driver. And add hda_chip_id for
more products. Distinguish DSP and non-DSP in firmware
loading function.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250723142423.38768-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
