| Age | Commit message (Collapse) | Author |
|---|
|
* for-next/selftests:
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
kselftest/arm64: Set test names prior to starting children
kselftest/arm64: Use preferred form for predicate load/stores
kselftest/arm64: fix array_size.cocci warning
kselftest/arm64: fix array_size.cocci warning
kselftest/arm64: Print ASCII version of unknown signal frame magic values
kselftest/arm64: Remove validation of extra_context from TODO
kselftest/arm64: Provide progress messages when signalling children
kselftest/arm64: Check that all children are producing output in fp-stress
|
|
When everything is starting up we are likely to have a lot of child
processes producing output at once. This means that we can reduce
overhead a bit by allowing epoll_wait() to return more than one
descriptor at once, it cuts down on the number of system calls we need
to do which on virtual platforms where the syscall overhead is a bit
more noticable and we're likely to have a lot more children active can
make a small but noticable difference.
On physical platforms the relatively small number of processes being run
and vastly improved speeds push the effects of this change into the
noise.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now we hold execution of the stress test programs until all children are
started there is no need to drain output while that is happening.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
At present fp-stress has a bit of a thundering herd problem since the
children it spawns start running immediately, meaning that they can start
starving the parent process of CPU before it has even started all the
children. This is much more severe on virtual platforms since they tend to
support far more SVE and SME vector lengths, be slower in general and for
some have issues with performance when simulating multiple CPUs.
We can mitigate this problem by having all the child processes block before
starting the test program, meaning that we at least have all the child
processes started before we start heavily using CPU. We still have the same
load issues while waiting for the actual stress test programs to start up
and produce output but they're at least all ready to go before that kicks
in, resulting in substantial reductions in overall runtime on some of the
severely affected systems. One test was showing about 20% improvement.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since we now flush output immediately on starting children we should ensure
that the child name is set beforehand so that any output that does get
flushed from the newly created child has the name of the child attached.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221124120722.150988-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The preferred form of the str/ldr for predicate registers with an immediate
of zero is to omit the zero, and the clang built in assembler rejects the
zero immediate. Drop the immediate.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221117114130.687261-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix following coccicheck warning:
tools/testing/selftests/arm64/mte/check_mmap_options.c:64:24-25:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:66:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:135:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:96:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:190:24-25:
WARNING: Use ARRAY_SIZE
Signed-off-by: KaiLong Wang <wangkailong@jari.cn>
Link: https://lore.kernel.org/r/777ce8ba.12e.184705d4211.Coremail.wangkailong@jari.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add coverage for FEAT_SVE2p1.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-7-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since the newly added instruction is in the HINT space we can't reasonably
test for it actually being present.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add FEAT_CSSC to the set of features checked by the hwcap selftest.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use ARRAY_SIZE to fix the following coccicheck warnings:
tools/testing/selftests/arm64/mte/check_buffer_fill.c:341:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:35:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:168:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:72:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:369:25-26:
WARNING: Use ARRAY_SIZE
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20221105073143.78521-1-tegongkang@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The signal magic values are supposed to be allocated as somewhat meaningful
ASCII so if we encounter a bad magic value print the any alphanumeric
characters we find in it as well as the hex value to aid debuggability.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221102140543.98193-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When fixing up support for extra_context in the signal handling tests I
didn't notice that there is a TODO file in the directory which lists this
as a thing to be done. Since it's been done remove it from the list.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221027110324.33802-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Especially when the test is configured to run for a longer time it can be
reassuring to users to see that the supervising program is running OK so
provide a message every second when the output timer expires.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221017144553.773176-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently we don't have an explicit check that when it's been a second
since we have seen output produced from the test programs starting up that
means all of them are running and we should start both sending signals and
timing out. This is not reliable, especially on very heavily loaded systems
where the test programs might take longer than a second to run.
We do skip sending signals to children that have not produced output yet
so we won't cause them to exit unexpectedly by sending a signal but this
can create confusion when interpreting output, for example appearing to
show the tests running for less time than expected or appearing to show
missed signal deliveries. Avoid issues by explicitly checking that we have
seen output from all the child processes before we start sending signals
or counting test run time.
This is especially likely on virtual platforms with large numbers of vector
lengths supported since the platforms are slow and there will be a lot of
tasks per CPU.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221017144553.773176-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* for-next/kselftest: (28 commits)
: Kselftest updates for arm64
kselftest/arm64: Handle EINTR while reading data from children
kselftest/arm64: Flag fp-stress as exiting when we begin finishing up
kselftest/arm64: Don't repeat termination handler for fp-stress
kselftest/arm64: Don't enable v8.5 for MTE selftest builds
kselftest/arm64: Fix typo in hwcap check
kselftest/arm64: Add hwcap test for RNG
kselftest/arm64: Add SVE 2 to the tested hwcaps
kselftest/arm64: Add missing newline in hwcap output
kselftest/arm64: Fix spelling misakes of signal names
kselftest/arm64: Enforce actual ABI for SVE syscalls
kselftest/arm64: Correct buffer allocation for SVE Z registers
kselftest/arm64: Include larger SVE and SME VLs in signal tests
kselftest/arm64: Allow larger buffers in get_signal_context()
kselftest/arm64: Preserve any EXTRA_CONTEXT in handle_signal_copyctx()
kselftest/arm64: Validate contents of EXTRA_CONTEXT blocks
kselftest/arm64: Only validate each signal context once
kselftest/arm64: Remove unneeded protype for validate_extra_context()
kselftest/arm64: Fix validation of EXTRA_CONTEXT signal context location
kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT
kselftest/arm64: Validate signal ucontext in place
...
|
|
Currently we treat any error when reading from the child as a failure and
don't read any more output from that child as a result. This ignores the
fact that it is valid for read() to return EINTR as the error code if there
is a signal pending so we could stop handling the output of children,
especially during exit when we will get some SIGCHLD signals delivered to
us. Fix this by pulling the read handling out into a separate function
which returns a flag if reads should be continued and wrapping it in a
loop.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220921181345.618085-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Once we have started exiting the termination handler will have the same
effect as what we're already running so set the termination flag at that
point.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220921181345.618085-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When fp-stress gets a termination signal it sets a flag telling itself to
exit and sends a termination signal to all the children. If the flag is set
then don't bother repeating this process, it isn't going to accomplish
anything other than consume CPU time which can be an issue when running in
emulation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220921181345.618085-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we set -march=armv8.5+memtag when building the MTE selftests,
allowing the compiler to emit v8.5 and MTE instructions for anything it
generates. This means that we may get code that will generate SIGILLs when
run on older systems rather than skipping on non-MTE systems as should be
the case. Most toolchains don't select any incompatible instructions but
I have seen some reports which suggest that some may be appearing which do
so. This is also potentially problematic in that if the compiler chooses to
emit any MTE instructions for the C code it may interfere with the MTE
usage we are trying to test.
Since the only reason we are specifying this option is to allow us to
assemble MTE instructions in mte_helper.S we can avoid these issues by
moving to using a .arch directive there and adding the -march explicitly to
the toolchain support check instead of the generic CFLAGS.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220928154517.173108-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We use a local variable hwcap to refer to the element of the hwcaps array
which we are currently checking. When checking for the relevant hwcap bit
being set in testing we were dereferencing hwcaps rather than hwcap in
fetching the AT_HWCAP to use, which is perfectly valid C but means we were
always checking the bit was set in the hwcap for whichever feature is first
in the array. Remove the stray s.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220907113400.12982-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Extend the ptrace test support for NT_ARM_TLS to cover TPIDR2_EL0 - on
systems that support SME the NT_ARM_TLS regset can be up to 2 elements
long with the second element containing TPIDR2_EL0. On systems
supporting SME we verify that this value can be read and written while
on systems that do not support SME we verify correct truncation of reads
and writes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154921.837871-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In preparation for extending support for NT_ARM_TLS to cover additional
TPIDRs add some tests for the existing interface. Do this in a generic
ptrace test program to provide a place to collect additional tests in
the future.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154921.837871-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Validate the RNG hwcap and make sure we don't generate a SIGILL reading
RNDR when it is reported.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220913141101.151400-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Include SVE 2 and the various subfeatures it adds in the set of
hwcaps we check for.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220913141101.151400-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Clean up the output of the test by adding a missing newline, the fix had
been done locally but didn't make it into the applied version.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220913141101.151400-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There are a couple of spelling mistakes of signame names. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220907170902.687340-1-colin.i.king@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently syscall-abi permits the bits in Z registers not shared with the
V registers as well as all of the predicate registers to be preserved on
syscall but the actual implementation has always cleared them and our
documentation has now been updated to make that the documented ABI so
update the syscall-abi test to match.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220829162502.886816-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The buffer used for verifying SVE Z registers allocated enough space for
16 maximally sized registers rather than 32 due to using the macro for the
number of P registers. In practice this didn't matter since for historical
reasons the maximum VQ defined in the ABI is greater the architectural
maximum so we will always allocate more space than is needed even with
emulated platforms implementing the architectural maximum. Still, we should
use the right define.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220829162502.886816-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now that the core utilities for signal testing support handling data in
EXTRA_CONTEXT blocks we can test larger SVE and SME VLs which spill over
the limits in the base signal context. This is done by defining storage
for the context as a union with a ucontext_t and a buffer together with
some helpers for getting relevant sizes and offsets like we do for
fake_sigframe, this isn't the most lovely code ever but is fairly
straightforward to implement and much less invasive to the somewhat
unclear and indistinct layers of abstraction in the signal handling test
code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-11-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In order to allow testing of signal contexts that overflow the base signal
frame allow callers to pass the buffer size for the user context into
get_signal_context(). No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-10-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When preserving the signal context for later verification by testcases
check for and include any EXTRA_CONTEXT block if enough space has been
provided.
Since the EXTRA_CONTEXT block includes a pointer to the start of the
additional data block we need to do at least some fixup on the copied
data. For simplicity in users we do this by extending the length of
the EXTRA_CONTEXT to include the following termination record, this
will cause users to see the extra data as part of the linked list of
contexts without needing any special handling. Care will be needed if
any specific tests for EXTRA_CONTEXT are added beyond the validation
done in ASSERT_GOOD_CONTEXT.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-9-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently in validate_reserved() we check the basic form and contents of
an EXTRA_CONTEXT block but do not actually validate anything inside the
data block it provides. Extend the validation to do so, when we get to the
terminator for the main data block reset and start walking the extra data
block instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-8-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently for the more complex signal context types we validate the context
specific details the end of the parsing loop validate_reserved() if we've
ever seen a context of that type. This is currently merely a bit inefficient
but will get a bit awkward when we start parsing extra_context, at which
point we will need to reset the head to advance into the extra space that
extra_context provides. Instead only do the more detailed checks on each
context type the first time we see that context type.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-7-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Nothing outside testcases.c should need to use validate_extra_context(),
remove the prototype to ensure nothing does.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently in validate_extra_context() we assert both that the extra data
pointed to by the EXTRA_CONTEXT is 16 byte aligned and that it immediately
follows the struct _aarch64_ctx providing the terminator for the linked
list of contexts in the signal frame. Since struct _aarch64_ctx is an 8
byte structure which must be 16 byte aligned these cannot both be true. As
documented in sigcontext.h and implemented by the kernel the extra data
should be at the next 16 byte aligned address after the terminator so fix
the validation to match.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When arm64 signal context data overflows the base struct sigcontext it gets
placed in an extra buffer pointed to by a record of type EXTRA_CONTEXT in
the base struct sigcontext which is required to be the last record in the
base struct sigframe. The current validation code attempts to check this
by using GET_RESV_NEXT_HEAD() to step forward from the current record to
the next but that is a macro which assumes it is being provided with a
struct _aarch64_ctx and uses the size there to skip forward to the next
record. Instead validate_extra_context() passes it a struct extra_context
which has a separate size field. This compiles but results in us trying
to validate a termination record in completely the wrong place, at best
failing validation and at worst just segfaulting. Fix this by passing
the struct _aarch64_ctx we meant to into the macro.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In handle_input_signal_copyctx() we use ASSERT_GOOD_CONTEXT() to validate
that the context we are saving meets expectations however we do this on
the saved copy rather than on the actual signal context passed in. This
breaks validation of EXTRA_CONTEXT since we attempt to validate the ABI
requirement that the additional space supplied is immediately after the
termination record in the standard context which will not be the case
after it has been copied to another location.
Fix this by doing the validation before we copy. Note that nothing actually
looks inside the EXTRA_CONTEXT at present.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The za_regs signal test was enumerating the SVE vector lengths rather than
the SME vector lengths through cut'n'paste error when determining what to
test. Enumerate the SME vector lengths instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When ZA is disabled there should be no register data in the ZA signal
frame, add a test case which confirms that this is the case.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829155728.854947-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we accept any size for the ZA signal context that the shared
code will accept which means we don't verify that any data is present.
Since we have enabled ZA we know that there must be data so strengthen
the check to only accept a signal frame with data, and while we're at it
since we enabled ZA but did not set any data we know that ZA must contain
zeros, confirm that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829155728.854947-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently the stress test programs for floating point context switching are
run by hand, there are extremely simplistic harnesses which run some copies
of each test individually but they are not integrated into kselftest and
with SVE and SME they only run with whatever vector length the process has
by default. This is hassle when running the tests and means that they're
not being run at all by CI systems picking up kselftest.
In order to improve our coverage and provide a more convenient interface
provide a harness program which starts enough stress test programs up to
cause context switching and runs them for a set period. If only FPSIMD is
available in the system we start two copies of the FPSIMD stress test per
CPU, otherwise we start one copy of the FPSIMD and then start the SVE,
streaming SVE and ZA tests once per CPU for each available VL they have
to run on. We then run for a set period monitoring for any errors
reported by the test programs before cleanly terminating them.
In order to provide additional coverage of signal handling and some extra
noise in the scheduling we send a SIGUSR2 to the stress tests once a
second, the tests will count the number of signals they get.
Since kselftest is generally expected to run quickly we by default only run
for ten seconds. This is enough to show if there is anything cripplingly
wrong but not exactly a thorough soak test, for interactive and more
focused use a command line option -t N is provided which overrides the
length of time to run for (specified in seconds) and if 0 is specified then
there is no timeout and the test must be manually terminated. The timeout
is counted in seconds with no output, this is done to account for the
potentially slow startup time for the test programs on virtual platforms
which tend to struggle during startup as they are both slow and tend to
support a wide range of vector lengths.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154452.824870-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To interface more robustly with other processes install the signal handers
in the floating point stress tests before we produce any output, this
means that a parent process can know that if it has seen any output from
the test then the test is ready to handle incoming signals.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220906220056.820295-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently the floating point stress tests mostly support testing that the
data they are checking can be disrupted from a signal handler triggered by
SIGUSR1. This is not properly implemented for all the tests and in testing
is frequently modified to just handle the signal without corrupting data in
order to ensure that signal handling does not corrupt data. Directly support
this usage by installing a SIGUSR2 handler which simply counts the signal
delivery.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154452.824870-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since we now have an explicit test for the syscall ABI there is no need for
za-test to cover getpid() so just unconditionally do sched_yield() like we
do in fpsimd-test.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154452.824870-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add some trivial hwcap validation which checks that /proc/cpuinfo and
AT_HWCAP agree with each other and can verify that for extensions that can
generate a SIGILL due to adding new instructions one appears or doesn't
appear as expected. I've added SVE and SME, other capabilities can be
added later if this gets merged.
This isn't super exciting but on the other hand took very little time to
write and should be handy when verifying that you wired up AT_HWCAP
properly.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154602.827275-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Stop using the KSFT_KHDR_INSTALL flag as installing the kernel headers
from the kselftest Makefile is causing some issues. Instead, rely on
the headers to be installed directly by the top-level Makefile
"headers_install" make target prior to building kselftest.
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
On platform where SVE is supported but there are less than 2 VLs available
the signal SVE change test should be skipped instead of failing.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220524103149.2802-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In case a distribution enables branch protection by default do as we do for
the main kernel and explicitly disable branch protection when building the
test case for having BTI disabled to ensure it doesn't get turned on by the
toolchain defaults.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220516182213.727589-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The "bti" selftests are built with -nostdlib, which apparently
automatically creates a statically linked binary, which is what we want
and need for BTI (to avoid interactions with the dynamic linker).
However this is not true when building a PIE binary, which some
toolchains (Ubuntu) configure as the default.
When compiling btitest with such a toolchain, it will create a
dynamically linked binary, which will probably fail some tests, as the
dynamic linker might not support BTI:
===================
TAP version 13
1..18
not ok 1 nohint_func/call_using_br_x0
not ok 2 nohint_func/call_using_br_x16
not ok 3 nohint_func/call_using_blr
....
===================
To make sure we create static binaries, add an explicit -static on the
linker command line. This forces static linking even if the toolchain
defaults to PIE builds, and fixes btitest runs on BTI enabled machines.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Fixes: 314bcbf09f14 ("kselftest: arm64: Add BTI tests")
Link: https://lore.kernel.org/r/20220511172129.2078337-1-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
