summaryrefslogtreecommitdiff
path: root/tools/testing/selftests
AgeCommit message (Collapse)Author
2022-04-20rcutorture: Allow rcutorture without RCU Tasks TracePaul E. McKenney
Unless a kernel builds rcutorture, whether built-in or as a module, that kernel is also built with CONFIG_TASKS_TRACE_RCU, whether anything else needs Tasks Trace RCU or not. This unnecessarily increases kernel size. This commit therefore decouples the presence of rcutorture from the presence of RCU Tasks Trace. However, there is a need to select CONFIG_TASKS_TRACE_RCU for testing purposes. Except that casual users must not be bothered with questions -- for them, this needs to be fully automated. There is thus a CONFIG_FORCE_TASKS_TRACE_RCU that selects CONFIG_TASKS_TRACE_RCU, is user-selectable, but which depends on CONFIG_RCU_EXPERT. [ paulmck: Apply kernel test robot feedback. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-20rcu: Make the TASKS_RCU Kconfig option be selectedPaul E. McKenney
Currently, any kernel built with CONFIG_PREEMPTION=y also gets CONFIG_TASKS_RCU=y, which is not helpful to people trying to build preemptible kernels of minimal size. Because CONFIG_TASKS_RCU=y is needed only in kernels doing tracing of one form or another, this commit moves from TASKS_RCU deciding when it should be enabled to the tracing Kconfig options explicitly selecting it. This allows building preemptible kernels without TASKS_RCU, if desired. This commit also updates the SRCU-N and TREE09 rcutorture scenarios in order to avoid Kconfig errors that would otherwise result from CONFIG_TASKS_RCU being selected without its CONFIG_RCU_EXPERT dependency being met. [ paulmck: Apply BPF_SYSCALL feedback from Andrii Nakryiko. ] Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-20selftests/bpf: Add test for skb_load_bytesLiu Jian
Use bpf_prog_test_run_opts to test the skb_load_bytes function. Tests the behavior when offset is greater than INT_MAX or a normal value. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220416105801.88708-4-liujian56@huawei.com
2022-04-20selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packetsIdo Schimmel
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: d01724dd2a66 ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packetsIdo Schimmel
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-19selftests: mqueue: drop duplicate min definitionGeliang Tang
Drop duplicate macro min() definition in mq_perf_tests.c, use MIN() in sys/param.h instead. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-19selftests/ftrace: add mips support for kprobe args syntax testsZe Zhang
This is the mips variant of commit <3990b5baf225> ("selftests/ftrace: Add s390 support for kprobe args tests"). Signed-off-by: Ze Zhang <zhangze@loongson.cn> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-19selftests/ftrace: add mips support for kprobe args string testsZe Zhang
This is the mips variant of commit <3990b5baf225> ("selftests/ftrace: Add s390 support for kprobe args tests"). Signed-off-by: Ze Zhang <zhangze@loongson.cn> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-19selftests/bpf: Add tests for type tag order validationKumar Kartikeya Dwivedi
Add a few test cases that ensure we catch cases of badly ordered type tags in modifier chains. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220419164608.1990559-3-memxor@gmail.com
2022-04-19selftests/bpf: Use non-autoloaded programs in few testsAndrii Nakryiko
Take advantage of new libbpf feature for declarative non-autoloaded BPF program SEC() definitions in few test that test single program at a time out of many available programs within the single BPF object. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220419002452.632125-2-andrii@kernel.org
2022-04-19selftests/bpf: Workaround a verifier issue for test exhandlerYonghong Song
The llvm patch [1] enabled opaque pointer which caused selftest 'exhandler' failure. ... ; work = task->task_works; 7: (79) r1 = *(u64 *)(r6 +2120) ; R1_w=ptr_callback_head(off=0,imm=0) R6_w=ptr_task_struct(off=0,imm=0) ; func = work->func; 8: (79) r2 = *(u64 *)(r1 +8) ; R1_w=ptr_callback_head(off=0,imm=0) R2_w=scalar() ; if (!work && !func) 9: (4f) r1 |= r2 math between ptr_ pointer and register with unbounded min value is not allowed below is insn 10 and 11 10: (55) if r1 != 0 goto +5 11: (18) r1 = 0 ll ... In llvm, the code generation of 'r1 |= r2' happened in codegen selectiondag phase due to difference of opaque pointer vs. non-opaque pointer. Without [1], the related code looks like: r2 = *(u64 *)(r6 + 2120) r1 = *(u64 *)(r2 + 8) if r2 != 0 goto +6 <LBB0_4> if r1 != 0 goto +5 <LBB0_4> r1 = 0 ll ... I haven't found a good way in llvm to fix this issue. So let us workaround the problem first so bpf CI won't be blocked. [1] https://reviews.llvm.org/D123300 Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220419050900.3136024-1-yhs@fb.com
2022-04-19selftests/bpf: Limit unroll_count for pyperf600 testYonghong Song
LLVM commit [1] changed loop pragma behavior such that full loop unroll is always honored with user pragma. Previously, unroll count also depends on the unrolled code size. For pyperf600, without [1], the loop unroll count is 150. With [1], the loop unroll count is 600. The unroll count of 600 caused the program size close to 298k and this caused the following code is generated: 0: 7b 1a 00 ff 00 00 00 00 *(u64 *)(r10 - 256) = r1 ; uint64_t pid_tgid = bpf_get_current_pid_tgid(); 1: 85 00 00 00 0e 00 00 00 call 14 2: bf 06 00 00 00 00 00 00 r6 = r0 ; pid_t pid = (pid_t)(pid_tgid >> 32); 3: bf 61 00 00 00 00 00 00 r1 = r6 4: 77 01 00 00 20 00 00 00 r1 >>= 32 5: 63 1a fc ff 00 00 00 00 *(u32 *)(r10 - 4) = r1 6: bf a2 00 00 00 00 00 00 r2 = r10 7: 07 02 00 00 fc ff ff ff r2 += -4 ; PidData* pidData = bpf_map_lookup_elem(&pidmap, &pid); 8: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 10: 85 00 00 00 01 00 00 00 call 1 11: bf 08 00 00 00 00 00 00 r8 = r0 ; if (!pidData) 12: 15 08 15 e8 00 00 00 00 if r8 == 0 goto -6123 <LBB0_27588+0xffffffffffdae100> Note that insn 12 has a branch offset -6123 which is clearly illegal and will be rejected by the verifier. The negative offset is due to the branch range is greater than INT16_MAX. This patch changed the unroll count to be 150 to avoid above branch target insn out-of-range issue. Also the llvm is enhanced ([2]) to assert if the branch target insn is out of INT16 range. [1] https://reviews.llvm.org/D119148 [2] https://reviews.llvm.org/D123877 Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220419043230.2928530-1-yhs@fb.com
2022-04-18selftests/bpf: Refactor prog_tests logging and test executionMykola Lysenko
This is a pre-req to add separate logging for each subtest in test_progs. Move all the mutable test data to the test_result struct. Move per-test init/de-init into the run_one_test function. Consolidate data aggregation and final log output in calculate_and_print_summary function. As a side effect, this patch fixes double counting of errors for subtests and possible duplicate output of subtest log on failures. Also, add prog_tests_framework.c test to verify some of the counting logic. As part of verification, confirmed that number of reported tests is the same before and after the change for both parallel and sequential test execution. Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220418222507.1726259-1-mykolal@fb.com
2022-04-18selftests: mlxsw: Introduce devlink line card ↵Jiri Pirko
provision/unprovision/activation tests Introduce basic line card manipulation which consists of provisioning, unprovisioning and activation of a line card. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17net/ipv6: Introduce accept_unsolicited_na knob to implement router-side ↵Arun Ajith S
changes for RFC9131 Add a new neighbour cache entry in STALE state for routers on receiving an unsolicited (gratuitous) neighbour advertisement with target link-layer-address option specified. This is similar to the arp_accept configuration for IPv4. A new sysctl endpoint is created to turn on this behaviour: /proc/sys/net/ipv6/conf/interface/accept_unsolicited_na. Signed-off-by: Arun Ajith S <aajith@arista.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-16lkdtm: Add CFI_BACKWARD to test ROP mitigationsKees Cook
In order to test various backward-edge control flow integrity methods, add a test that manipulates the return address on the stack. Currently only arm64 Pointer Authentication and Shadow Call Stack is supported. $ echo CFI_BACKWARD | cat >/sys/kernel/debug/provoke-crash/DIRECT Under SCS, successful test of the mitigation is reported as: lkdtm: Performing direct entry CFI_BACKWARD lkdtm: Attempting unchecked stack return address redirection ... lkdtm: ok: redirected stack return address. lkdtm: Attempting checked stack return address redirection ... lkdtm: ok: control flow unchanged. Under PAC, successful test of the mitigation is reported by the PAC exception handler: lkdtm: Performing direct entry CFI_BACKWARD lkdtm: Attempting unchecked stack return address redirection ... lkdtm: ok: redirected stack return address. lkdtm: Attempting checked stack return address redirection ... Unable to handle kernel paging request at virtual address bfffffc0088d0514 Mem abort info: ESR = 0x86000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault [bfffffc0088d0514] address between user and kernel address ranges ... If the CONFIGs are missing (or the mitigation isn't working), failure is reported as: lkdtm: Performing direct entry CFI_BACKWARD lkdtm: Attempting unchecked stack return address redirection ... lkdtm: ok: redirected stack return address. lkdtm: Attempting checked stack return address redirection ... lkdtm: FAIL: stack return address was redirected! lkdtm: This is probably expected, since this kernel was built *without* CONFIG_ARM64_PTR_AUTH_KERNEL=y nor CONFIG_SHADOW_CALL_STACK=y Co-developed-by: Dan Li <ashimida@linux.alibaba.com> Signed-off-by: Dan Li <ashimida@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/lkml/20220416001103.1524653-1-keescook@chromium.org
2022-04-15Merge tag 'linux-kselftest-fixes-5.18-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "A mqueue perf test memory leak bug fix. mq_perf_tests failed to call CPU_FREE to free memory allocated by CPU_SET" * tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
2022-04-13selftests: kvm/x86/xen: Replace a comma in the xen_shinfo_test with semicolonLike Xu
+WARNING: Possible comma where semicolon could be used +#397: FILE: tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c:700: ++ tmr.type = KVM_XEN_VCPU_ATTR_TYPE_TIMER, ++ vcpu_ioctl(vm, VCPU_ID, KVM_XEN_VCPU_GET_ATTR, &tmr); Fixes: 25eaeebe710c ("KVM: x86/xen: Add self tests for KVM_XEN_HVM_CONFIG_EVTCHN_SEND") Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20220406063715.55625-4-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-13Merge branch 'kvm-older-features' into HEADPaolo Bonzini
Merge branch for features that did not make it into 5.18: * New ioctls to get/set TSC frequency for a whole VM * Allow userspace to opt out of hypercall patching Nested virtualization improvements for AMD: * Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE, nested vGIF) * Allow AVIC to co-exist with a nested guest running * Fixes for LBR virtualizations when a nested guest is running, and nested LBR virtualization support * PAUSE filtering for nested hypervisors Guest support: * Decoupling of vcpu_is_preempted from PV spinlocks Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-13selftests: net: fib_rule_tests: add support to select a test to runAlaa Mohamed
Add boilerplate test loop in test to run all tests in fib_rule_tests.sh Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "x86: - Miscellaneous bugfixes - A small cleanup for the new workqueue code - Documentation syntax fix RISC-V: - Remove hgatp zeroing in kvm_arch_vcpu_put() - Fix alignment of the guest_hang() in KVM selftest - Fix PTE A and D bits in KVM selftest - Missing #include in vcpu_fp.c ARM: - Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2 - Fix the MMU write-lock not being taken on THP split - Fix mixed-width VM handling - Fix potential UAF when debugfs registration fails - Various selftest updates for all of the above" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (24 commits) KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU KVM: SVM: Do not activate AVIC for SEV-enabled guest Documentation: KVM: Add SPDX-License-Identifier tag selftests: kvm: add tsc_scaling_sync to .gitignore RISC-V: KVM: include missing hwcap.h into vcpu_fp KVM: selftests: riscv: Fix alignment of the guest_hang() function KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put() selftests: KVM: Free the GIC FD when cleaning up in arch_timer selftests: KVM: Don't leak GIC FD across dirty log test iterations KVM: Don't create VM debugfs files outside of the VM directory KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3) KVM: avoid NULL pointer dereference in kvm_dirty_ring_push KVM: arm64: selftests: Introduce vcpu_width_config KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs KVM: arm64: vgic: Remove unnecessary type castings KVM: arm64: Don't split hugepages outside of MMU write lock KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32 KVM: arm64: Generally disallow SMC64 for AArch32 guests ...
2022-04-12lkdtm/heap: Note conditions for SLAB_LINEAR_OVERFLOWKees Cook
It wasn't clear when SLAB_LINEAR_OVERFLOW would be expected to trip. Explicitly describe it and include the CONFIGs in the kselftest. Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2022-04-12testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu setAthira Rajeev
The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate CPU set. This cpu set is used further in pthread_attr_setaffinity_np and by pthread_create in the code. But in current code, allocated cpu set is not freed. Fix this issue by adding CPU_FREE in the "shutdown" function which is called in most of the error/exit path for the cleanup. There are few error paths which exit without using shutdown. Add a common goto error path with CPU_FREE for these cases. Fixes: 7820b0715b6f ("tools/selftests: add mq_perf_tests") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-12selftests: forwarding: new test, verify host mdb entriesJoachim Wiberg
Boiler plate for testing static mdb entries. This first test verifies adding and removing host mdb entries for all supported types: IPv4, IPv6, and MAC multicast. Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-11torture: Make thread detection more robust by using lspcuPaul Menzel
For consecutive numbers the lscpu command collapses the output and just shows the range with start and end. The processors are numbered that way on POWER8. $ sudo ppc64_cpu --smt=8 $ lscpu | grep '^NUMA node' NUMA node(s): 2 NUMA node0 CPU(s): 0-79 NUMA node8 CPU(s): 80-159 This causes the heuristic to detect the number threads per core, looking for the number after the first comma, to fail, and QEMU aborts because of invalid arguments. $ lscpu | grep '^NUMA node0' | sed -e 's/^[^,-]*(,|\-)\([0-9]*\),.*$/\1/' NUMA node0 CPU(s): 0-79 But the lscpu command shows the number of threads per core: $ sudo ppc64_cpu --smt=8 $ lscpu | grep 'Thread(s) per core' Thread(s) per core: 8 $ sudo ppc64_cpu --smt=off $ lscpu | grep 'Thread(s) per core' Thread(s) per core: 1 This commit therefore directly uses that value and replaces use of grep with "sed -n" and its "p" command. Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11torture: Permit running of experimental torture typesPaul E. McKenney
This commit weakens the checks of the kvm.sh script's --torture parameter and the kvm-recheck.sh script's parsing so that experimental torture tests may be created without updating these two scripts. The changes required are to the appropriate Makefile and Kconfig file, plus a directory whose name begins with "X" must be added to the rcutorture/configs file. This new directory's name can then be passed in via the kvm.sh script's --torture parameter. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11torture: Use "-o Batchmode=yes" to disable ssh password requestsPaul E. McKenney
The torture.sh script normally runs unattended, so there is not much point in the "ssh" command asking for a password. This commit therefore adds the "-o Batchmode=yes" argument to each "ssh" command to cause it to fail rather than ask for a password. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11torture: Reposition so that $? collects ssh code in torture.shPaul E. McKenney
An "echo" slipped in between an "ssh" and the "ret=$?" that was intended to collect its exit code, which prevents torture.sh from detecting "ssh" failure. This commit therefore reassociates the two. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11torture: Add rcu_normal and rcu_expedited runs to torture.shPaul E. McKenney
Currently, the rcupdate.rcu_normal and rcupdate.rcu_expedited kernel boot parameters are not regularly tested. The potential addition of polled expedited grace-period APIs increases the amount of code that is affected by these kernel boot parameters. This commit therefore adds a "--do-rt" argument to torture.sh to exercise these kernel-boot options. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11selftests: kvm: add tsc_scaling_sync to .gitignoreLike Xu
The tsc_scaling_sync's binary should be present in the .gitignore file for the git to ignore it. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20220406063715.55625-3-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-11selftests/bpf: Drop duplicate max/min definitionsGeliang Tang
Drop duplicate macros min() and MAX() definitions in prog_tests and use MIN() or MAX() in sys/param.h instead. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/1ae276da9925c2de59b5bdc93b693b4c243e692e.1649462033.git.geliang.tang@suse.com
2022-04-11selftests/mptcp: add diag listen testsFlorian Westphal
Check dumping of mptcp listener sockets: 1. filter by dport should not return any results 2. filter by sport should return listen sk 3. filter by saddr+sport should return listen sk 4. no filter should return listen sk Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Replace unnecessary list_for_each_entry_continue() in nf_tables, from Jakob Koschel. 2) Add struct nf_conntrack_net_ecache to conntrack event cache and use it, from Florian Westphal. 3) Refactor ctnetlink_dump_list(), also from Florian. 4) Bump module reference counter on cttimeout object addition/removal, from Florian. 5) Consolidate nf_log MAC printer, from Phil Sutter. 6) Add basic logging support for unknown ethertype, from Phil Sutter. 7) Consolidate check for sysctl nf_log_all_netns toggle, also from Phil. 8) Replace hardcode value in nft_bitwise, from Jeremy Sowden. 9) Rename BASIC-like goto tags in nft_bitwise to more meaningful names, also from Jeremy. 10) nft_fib support for reverse path filtering with policy-based routing on iif. Extend selftests to cover for this new usecase, from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11selftests: netfilter: add fib expression forward test caseFlorian Westphal
Its now possible to use fib expression in the forward chain (where both the input and output interfaces are known). Add a simple test case for this. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-10selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCKYafang Shao
We have switched to memcg-based memory accouting and thus the rlimit is not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in libbpf for backward compatibility, so we can use it instead now. After this change, the header tools/testing/selftests/bpf/bpf_rlimit.h can be removed. This patch also removes the useless header sys/resource.h from many files in tools/testing/selftests/bpf/. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220409125958.92629-3-laoar.shao@gmail.com
2022-04-10selftests/bpf: Improve by-name subtest selection logic in prog_testsMykola Lysenko
Improve subtest selection logic when using -t/-a/-d parameters. In particular, more than one subtest can be specified or a combination of tests / subtests. -a send_signal -d send_signal/send_signal_nmi* - runs send_signal test without nmi tests -a send_signal/send_signal_nmi*,find_vma - runs two send_signal subtests and find_vma test -a 'send_signal*' -a find_vma -d send_signal/send_signal_nmi* - runs 2 send_signal test and find_vma test. Disables two send_signal nmi subtests -t send_signal -t find_vma - runs two *send_signal* tests and one *find_vma* test This will allow us to have granular control over which subtests to disable in the CI system instead of disabling whole tests. Also, add new selftest to avoid possible regression when changing prog_test test name selection logic. Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220409001750.529930-1-mykolal@fb.com
2022-04-09KVM: selftests: riscv: Fix alignment of the guest_hang() functionAnup Patel
The guest_hang() function is used as the default exception handler for various KVM selftests applications by setting it's address in the vstvec CSR. The vstvec CSR requires exception handler base address to be at least 4-byte aligned so this patch fixes alignment of the guest_hang() function. Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V 64-bit") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-04-09KVM: selftests: riscv: Set PTE A and D bits in VS-stage page tableAnup Patel
Supporting hardware updates of PTE A and D bits is optional for any RISC-V implementation so current software strategy is to always set these bits in both G-stage (hypervisor) and VS-stage (guest kernel). If PTE A and D bits are not set by software (hypervisor or guest) then RISC-V implementations not supporting hardware updates of these bits will cause traps even for perfectly valid PTEs. Based on above explanation, the VS-stage page table created by various KVM selftest applications is not correct because PTE A and D bits are not set. This patch fixes VS-stage page table programming of PTE A and D bits for KVM selftests. Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V 64-bit") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-04-08Merge tag 'linux-kselftest-fixes-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Build and run-times fixes to tests: - header dependencies - missing tear-downs to release allocated resources in assert paths - missing error messages when build fails - coccicheck and unused variable warnings" * tag 'linux-kselftest-fixes-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/harness: Pass variant to teardown selftests/harness: Run TEARDOWN for ASSERT failures selftests: fix an unused variable warning in pidfd selftest selftests: fix header dependency for pid_namespace selftests selftests: x86: add 32bit build warnings for SUSE selftests/proc: fix array_size.cocci warning selftests/vDSO: fix array_size.cocci warning
2022-04-08Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-04-09 We've added 63 non-merge commits during the last 9 day(s) which contain a total of 68 files changed, 4852 insertions(+), 619 deletions(-). The main changes are: 1) Add libbpf support for USDT (User Statically-Defined Tracing) probes. USDTs are an abstraction built on top of uprobes, critical for tracing and BPF, and widely used in production applications, from Andrii Nakryiko. 2) While Andrii was adding support for x86{-64}-specific logic of parsing USDT argument specification, Ilya followed-up with USDT support for s390 architecture, from Ilya Leoshkevich. 3) Support name-based attaching for uprobe BPF programs in libbpf. The format supported is `u[ret]probe/binary_path:[raw_offset|function[+offset]]`, e.g. attaching to libc malloc can be done in BPF via SEC("uprobe/libc.so.6:malloc") now, from Alan Maguire. 4) Various load/store optimizations for the arm64 JIT to shrink the image size by using arm64 str/ldr immediate instructions. Also enable pointer authentication to verify return address for JITed code, from Xu Kuohai. 5) BPF verifier fixes for write access checks to helper functions, e.g. rd-only memory from bpf_*_cpu_ptr() must not be passed to helpers that write into passed buffers, from Kumar Kartikeya Dwivedi. 6) Fix overly excessive stack map allocation for its base map structure and buckets which slipped-in from cleanups during the rlimit accounting removal back then, from Yuntao Wang. 7) Extend the unstable CT lookup helpers for XDP and tc/BPF to report netfilter connection tracking tuple direction, from Lorenzo Bianconi. 8) Improve bpftool dump to show BPF program/link type names, Milan Landaverde. 9) Minor cleanups all over the place from various others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits) bpf: Fix excessive memory allocation in stack_map_alloc() selftests/bpf: Fix return value checks in perf_event_stackmap test selftests/bpf: Add CO-RE relos into linked_funcs selftests libbpf: Use weak hidden modifier for USDT BPF-side API functions libbpf: Don't error out on CO-RE relos for overriden weak subprogs samples, bpf: Move routes monitor in xdp_router_ipv4 in a dedicated thread libbpf: Allow WEAK and GLOBAL bindings during BTF fixup libbpf: Use strlcpy() in path resolution fallback logic libbpf: Add s390-specific USDT arg spec parsing logic libbpf: Make BPF-side of USDT support work on big-endian machines libbpf: Minor style improvements in USDT code libbpf: Fix use #ifdef instead of #if to avoid compiler warning libbpf: Potential NULL dereference in usdt_manager_attach_usdt() selftests/bpf: Uprobe tests should verify param/return values libbpf: Improve string parsing for uprobe auto-attach libbpf: Improve library identification for uprobe binary path resolution selftests/bpf: Test for writes to map key from BPF helpers selftests/bpf: Test passing rdonly mem to global func bpf: Reject writes for PTR_TO_MAP_KEY in check_helper_mem_access bpf: Check PTR_TO_MEM | MEM_RDONLY in check_helper_mem_access ... ==================== Link: https://lore.kernel.org/r/20220408231741.19116-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-08selftests/bpf: Fix return value checks in perf_event_stackmap testYuntao Wang
The bpf_get_stackid() function may also return 0 on success as per UAPI BPF helper documentation. Therefore, correct checks from 'val > 0' to 'val >= 0' to ensure that they cover all possible success return values. Signed-off-by: Yuntao Wang <ytcoode@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220408041452.933944-1-ytcoode@gmail.com
2022-04-08selftests/bpf: Add CO-RE relos into linked_funcs selftestsAndrii Nakryiko
Add CO-RE relocations into __weak subprogs for multi-file linked_funcs selftest to make sure libbpf handles such combination well. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220408181425.2287230-4-andrii@kernel.org
2022-04-07Merge tag 'net-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - new code bugs: - mctp: correct mctp_i2c_header_create result - eth: fungible: fix reference to __udivdi3 on 32b builds - eth: micrel: remove latencies support lan8814 Previous releases - regressions: - bpf: resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT - vrf: fix packet sniffing for traffic originating from ip tunnels - rxrpc: fix a race in rxrpc_exit_net() - dsa: revert "net: dsa: stop updating master MTU from master.c" - eth: ice: fix MAC address setting Previous releases - always broken: - tls: fix slab-out-of-bounds bug in decrypt_internal - bpf: support dual-stack sockets in bpf_tcp_check_syncookie - xdp: fix coalescing for page_pool fragment recycling - ovs: fix leak of nested actions - eth: sfc: - add missing xdp queue reinitialization - fix using uninitialized xdp tx_queue - eth: ice: - clear default forwarding VSI during VSI release - fix broken IFF_ALLMULTI handling - synchronize_rcu() when terminating rings - eth: qede: confirm skb is allocated before using - eth: aqc111: fix out-of-bounds accesses in RX fixup - eth: slip: fix NPD bug in sl_tx_timeout()" * tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) drivers: net: slip: fix NPD bug in sl_tx_timeout() bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets bpf: Support dual-stack sockets in bpf_tcp_check_syncookie myri10ge: fix an incorrect free for skb in myri10ge_sw_tso net: usb: aqc111: Fix out-of-bounds accesses in RX fixup qede: confirm skb is allocated before using net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=n net: phy: mscc-miim: reject clause 45 register accesses net: axiemac: use a phandle to reference pcs_phy dt-bindings: net: add pcs-handle attribute net: axienet: factor out phy_node in struct axienet_local net: axienet: setup mdio unconditionally net: sfc: fix using uninitialized xdp tx_queue rxrpc: fix a race in rxrpc_exit_net() net: openvswitch: fix leak of nested actions net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address() net: openvswitch: don't send internal clone attribute to the userspace. net: micrel: Fix KS8851 Kconfig ice: clear cmd_type_offset_bsz for TX rings ice: xsk: fix VSI state check in ice_xsk_wakeup() ...
2022-04-07selftests/bpf: Uprobe tests should verify param/return valuesAlan Maguire
uprobe/uretprobe tests don't do any validation of arguments/return values, and without this we can't be sure we are attached to the right function, or that we are indeed attached to a uprobe or uretprobe. To fix this record argument and return value for auto-attached functions and ensure these match expectations. Also need to filter by pid to ensure we do not pick up stray malloc()s since auto-attach traces libc system-wide. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1649245431-29956-4-git-send-email-alan.maguire@oracle.com
2022-04-07selftests: KVM: Free the GIC FD when cleaning up in arch_timerOliver Upton
In order to correctly destroy a VM, all references to the VM must be freed. The arch_timer selftest creates a VGIC for the guest, which itself holds a reference to the VM. Close the GIC FD when cleaning up a VM. Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220406235615.1447180-4-oupton@google.com
2022-04-07selftests: KVM: Don't leak GIC FD across dirty log test iterationsOliver Upton
dirty_log_perf_test instantiates a VGICv3 for the guest (if supported by hardware) to reduce the overhead of guest exits. However, the test does not actually close the GIC fd when cleaning up the VM between test iterations, meaning that the VM is never actually destroyed in the kernel. While this is generally a bad idea, the bug was detected from the kernel spewing about duplicate debugfs entries as subsequent VMs happen to reuse the same FD even though the debugfs directory is still present. Abstract away the notion of setup/cleanup of the GIC FD from the test by creating arch-specific helpers for test setup/cleanup. Close the GIC FD on VM cleanup and do nothing for the other architectures. Fixes: c340f7899af6 ("KVM: selftests: Add vgic initialization for dirty log perf test for ARM") Reviewed-by: Jing Zhang <jingzhangos@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220406235615.1447180-3-oupton@google.com
2022-04-07KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3)Andrew Jones
When testing a kernel with commit a5905d6af492 ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated") get-reg-list output vregs: Number blessed registers: 234 vregs: Number registers: 238 vregs: There are 1 new registers. Consider adding them to the blessed reg list with the following lines: KVM_REG_ARM_FW_REG(3), vregs: PASS ... That output inspired two changes: 1) add the new register to the blessed list and 2) explain why "Number registers" is actually four larger than "Number blessed registers" (on the system used for testing), even though only one register is being stated as new. The reason is that some registers are host dependent and they get filtered out when comparing with the blessed list. The system used for the test apparently had three filtered registers. Signed-off-by: Andrew Jones <drjones@redhat.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220316125129.392128-1-drjones@redhat.com
2022-04-06Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf 2022-04-06 We've added 8 non-merge commits during the last 8 day(s) which contain a total of 9 files changed, 139 insertions(+), 36 deletions(-). The main changes are: 1) rethook related fixes, from Jiri and Masami. 2) Fix the case when tracing bpf prog is attached to struct_ops, from Martin. 3) Support dual-stack sockets in bpf_tcp_check_syncookie, from Maxim. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets bpf: Support dual-stack sockets in bpf_tcp_check_syncookie bpf: selftests: Test fentry tracing a struct_ops program bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT rethook: Fix to use WRITE_ONCE() for rethook:: Handler selftests/bpf: Fix warning comparing pointer to 0 bpf: Fix sparse warnings in kprobe_multi_resolve_syms bpftool: Explicit errno handling in skeletons ==================== Link: https://lore.kernel.org/r/20220407031245.73026-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-06selftests/bpf: Test for writes to map key from BPF helpersKumar Kartikeya Dwivedi
When invoking bpf_for_each_map_elem callback, we are passed a PTR_TO_MAP_KEY, previously writes to this through helper may be allowed, but the fix in previous patches is meant to prevent that case. The test case tries to pass it as writable memory to helper, and fails test if it succeeds to pass the verifier. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220319080827.73251-6-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 13:27:57 +0000