summaryrefslogtreecommitdiff
path: root/tools/testing/selftests
AgeCommit message (Collapse)Author
2023-12-21Merge tag 'net-6.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and bpf. Current release - regressions: - bpf: syzkaller found null ptr deref in unix_bpf proto add - eth: i40e: fix ST code value for clause 45 Previous releases - regressions: - core: return error from sk_stream_wait_connect() if sk_wait_event() fails - ipv6: revert remove expired routes with a separated list of routes - wifi rfkill: - set GPIO direction - fix crash with WED rx support enabled - bluetooth: - fix deadlock in vhci_send_frame - fix use-after-free in bt_sock_recvmsg - eth: mlx5e: fix a race in command alloc flow - eth: ice: fix PF with enabled XDP going no-carrier after reset - eth: bnxt_en: do not map packet buffers twice Previous releases - always broken: - core: - check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() - check dev->gso_max_size in gso_features_check() - mptcp: fix inconsistent state on fastopen race - phy: skip LED triggers on PHYs on SFP modules - eth: mlx5e: - fix double free of encap_header - fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()" * tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: check dev->gso_max_size in gso_features_check() kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail net/ipv6: Revert remove expired routes with a separated list of routes net: avoid build bug in skb extension length calculation net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean() net: stmmac: fix incorrect flag check in timestamp interrupt selftests: add vlan hw filter tests net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() net: hns3: add new maintainer for the HNS3 ethernet driver net: mana: select PAGE_POOL net: ks8851: Fix TX stall caused by TX buffer overrun ice: Fix PF with enabled XDP going no-carrier after reset ice: alter feature support check for SRIOV and LAG ice: stop trashing VF VSI aggregator node ID information mailmap: add entries for Geliang Tang mptcp: fill in missing MODULE_DESCRIPTION() mptcp: fix inconsistent state on fastopen race selftests: mptcp: join: fix subflow_send_ack lookup net: phy: skip LED triggers on PHYs on SFP modules bpf: Add missing BPF_LINK_TYPE invocations ...
2023-12-21tracing: Update subbuffer with kilobytes not page orderSteven Rostedt (Google)
Using page order for deciding what the size of the ring buffer sub buffers are is exposing a bit too much of the implementation. Although the sub buffers are only allocated in orders of pages, allow the user to specify the minimum size of each sub-buffer via kilobytes like they can with the buffer size itself. If the user specifies 3 via: echo 3 > buffer_subbuf_size_kb Then the sub-buffer size will round up to 4kb (on a 4kb page size system). If they specify: echo 6 > buffer_subbuf_size_kb The sub-buffer size will become 8kb. and so on. Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.809766769@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-21ringbuffer/selftest: Add basic selftest to test changing subbuf orderSteven Rostedt (Google)
Add a self test that will write into the trace buffer with differ trace sub buffer order sizes. Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.520496304@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-21selftests/overlayfs: verify device and inode numbers in /proc/pid/mapsAndrei Vagin
When mapping a file on overlayfs, the file stored in ->vm_file is a backing file whose f_inode is on the underlying filesystem. We need to verify that /proc/pid/maps contains numbers of the overlayfs file, but not its backing file. Cc: Amir Goldstein <amir73il@gmail.com> Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com> Signed-off-by: Andrei Vagin <avagin@google.com> Link: https://lore.kernel.org/r/20231214064439.1023011-2-avagin@google.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-12-21Merge tag 'for-netdev' of ↵Paolo Abeni
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-12-21 Hi David, hi Jakub, hi Paolo, hi Eric, The following pull-request contains BPF updates for your *net* tree. We've added 3 non-merge commits during the last 5 day(s) which contain a total of 4 files changed, 45 insertions(+). The main changes are: 1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(), from Jiri Olsa. 2) Fix another syzkaller-found issue which triggered a NULL pointer dereference in BPF sockmap for unconnected unix sockets, from John Fastabend. bpf-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add missing BPF_LINK_TYPE invocations bpf: sockmap, test for unconnected af_unix sock bpf: syzkaller found null ptr deref in unix_bpf proto add ==================== Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21selftests/powerpc: Fix spelling mistake "EACCESS" -> "EACCES"Colin Ian King
There is a spelling mistake of the EACCES error name, fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231215112456.13554-1-colin.i.king@gmail.com
2023-12-21kselftest: rtnetlink.sh: use grep_fail when expecting the cmd failHangbin Liu
run_cmd_grep_fail should be used when expecting the cmd fail, or the ret will be set to 1, and the total test return 1 when exiting. This would cause the result report to fail if run via run_kselftest.sh. Before fix: # ./rtnetlink.sh -t kci_test_addrlft PASS: preferred_lft addresses have expired # echo $? 1 After fix: # ./rtnetlink.sh -t kci_test_addrlft PASS: preferred_lft addresses have expired # echo $? 0 Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-20selftests/damon: add a test for update_schemes_tried_regions hang bugSeongJae Park
Add a test for reproducing the update_schemes_tried_{regions,bytes} command-causing indefinite hang bug that fixed by commit 7d6fa31a2fd7 ("mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions"), to avoid mistakenly re-introducing the bug. Refer to the fix commit for more details of the bug. Link: https://lkml.kernel.org/r/20231212194810.54457-6-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/damon: add a test for update_schemes_tried_regions sysfs commandSeongJae Park
Add a selftest for verifying the accuracy of DAMON's access monitoring functionality. The test starts a program of artificial access pattern, monitor the access pattern using DAMON, and check if DAMON finds expected amount of hot data region (working set size) with only acceptable error rate. Note that the acceptable error rate is set with only naive assumptions and small number of tests. Hence failures of the test may not always mean DAMON is broken. Rather than that, those could be a signal to better understand the real accuracy level of DAMON in wider environments. Based on further finding, we could optimize DAMON or adjust the expectation of the test. Link: https://lkml.kernel.org/r/20231212194810.54457-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/damon/_damon_sysfs: implement updat_schemes_tried_bytes commandSeongJae Park
Implement update_schemes_tried_bytes command of DAMON sysfs interface in _damon_sysfs.py. It is not only making the update, but also read the updated value from the sysfs interface and store it in the Kdamond python objects so that the user of the module can easily get the value. Link: https://lkml.kernel.org/r/20231212194810.54457-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/damon/_damon_sysfs: implement kdamonds start functionSeongJae Park
Extend the tests-writing-purpose DAMON sysfs control module to support the kdamonds start functionality. Link: https://lkml.kernel.org/r/20231212194810.54457-3-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/damon: implement a python module for test-purpose DAMON sysfs controlsSeongJae Park
Patch series "selftests/damon: add Python-written DAMON functionality tests", v2. DAMON exports most of its functionality via its sysfs interface. Hence most DAMON functionality tests could be implemented using the interface. However, because the interfaces require simple but multiple operations for many controls, writing all such tests from the scratch could be repetitive and time consuming. Implement a minimum DAMON sysfs control module, and a couple of DAMON functionality tests using the control module. The first test is for ensuring minimum accuracy of data access monitoring, and the second test is for finding if a previously found and fixed bug is introduced again. Note that the DAMON sysfs control module is only for avoiding duplicating code in tests. For convenient and general control of DAMON, users should use DAMON user-space tools that developed for the purpose, such as damo[1]. [1] https://github.com/damonitor/damo Patches Sequence ---------------- This patchset is constructed with five patches. The first three patches implement a Python-written test implementation-purpose DAMON sysfs control module. The implementation is incrementally done in the sequence of the basic data structure (first patch) first, kdamonds start command (second patch) next, and finally DAMOS tried bytes update command (third patch). Then two patches for implementing selftests using the module follows. The fourth patch implements a basic functionality test of DAMON for working set estimation accuracy. Finally, the fifth patch implements a corner case test for a previously found bug. This patch (of 5): Implement a python module for DAMON sysfs controls. The module is aimed to be useful for writing DAMON functionality tests in future. Nonetheless, this module is only representing a subset of DAMON sysfs files. Following commits will implement more DAMON sysfs controls. Link: https://lkml.kernel.org/r/20231212194810.54457-1-sj@kernel.org Link: https://lkml.kernel.org/r/20231212194810.54457-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm/cow: add tests for anonymous multi-size THPRyan Roberts
Add tests similar to the existing PMD-sized THP tests, but which operate on memory backed by (PTE-mapped) multi-size THP. This reuses all the existing infrastructure. If the test suite detects that multi-size THP is not supported by the kernel, the new tests are skipped. Link: https://lkml.kernel.org/r/20231207161211.2374093-11-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm/cow: generalize do_run_with_thp() helperRyan Roberts
do_run_with_thp() prepares (PMD-sized) THP memory into different states before running tests. With the introduction of multi-size THP, we would like to reuse this logic to also test those smaller THP sizes. So let's add a thpsize parameter which tells the function what size THP it should operate on. A separate commit will utilize this change to add new tests for multi-size THP, where available. Link: https://lkml.kernel.org/r/20231207161211.2374093-10-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm/khugepaged: enlighten for multi-size THPRyan Roberts
The `collapse_max_ptes_none` test was previously failing when a THP size less than PMD-size had enabled="always". The root cause is because the test faults in 1 page less than the threshold it set for collapsing. But when THP is enabled always, we "over allocate" and therefore the threshold is passed, and collapse unexpectedly succeeds. Solve this by enlightening khugepaged selftest. Add a command line option to pass in the desired THP size that should be used for all anonymous allocations. The harness will then explicitly configure a THP size as requested and modify the `collapse_max_ptes_none` test so that it faults in the threshold minus the number of pages in the configured THP size. If no command line option is provided, default to order 0, as per previous behaviour. I chose to use an order in the command line interface, since this makes the interface agnostic of base page size, making it easier to invoke from run_vmtests.sh. Link: https://lkml.kernel.org/r/20231207161211.2374093-9-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm: support multi-size THP interface in thp_settingsRyan Roberts
Save and restore the new per-size hugepage enabled setting, if available on the running kernel. Since the number of per-size directories is not fixed, solve this as simply as possible by catering for a maximum number in the thp_settings struct (20). Each array index is the order. The value of THP_NEVER is changed to 0 so that all of these new settings default to THP_NEVER and the user only needs to fill in the ones they want to enable. Link: https://lkml.kernel.org/r/20231207161211.2374093-8-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm: factor out thp settings managementRyan Roberts
The khugepaged test has a useful framework for save/restore/pop/push of all thp settings via the sysfs interface. This will be useful to explicitly control multi-size THP settings in other tests, so let's move it out of khugepaged and into its own thp_settings.[c|h] utility. Link: https://lkml.kernel.org/r/20231207161211.2374093-7-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm/kugepaged: restore thp settings at exitRyan Roberts
Previously, the saved thp settings would be restored upon a signal or at the natural end of the test suite. But there are some tests that directly call exit() upon failure. In this case, the thp settings were not being restored, which could then influence other tests. Fix this by installing an atexit() handler to do the actual restore. The signal handler can now just call exit() and the atexit handler is invoked. Link: https://lkml.kernel.org/r/20231207161211.2374093-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20sync mm-stable with mm-hotfixes-stable to pick up depended-upon changesAndrew Morton
2023-12-20selftests: secretmem: floor the memory size to the multiple of page_sizeMuhammad Usama Anjum
The "locked-in-memory size" limit per process can be non-multiple of page_size. The mmap() fails if we try to allocate locked-in-memory with same size as the allowed limit if it isn't multiple of the page_size because mmap() rounds off the memory size to be allocated to next multiple of page_size. Fix this by flooring the length to be allocated with mmap() to the previous multiple of the page_size. This was getting triggered on KernelCI regularly because of different ulimit settings which wasn't multiple of the page_size. Find logs here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/ The bug in was present from the time test was first added. Link: https://lkml.kernel.org/r/20231214101931.1155586-1-usama.anjum@collabora.com Fixes: 76fe17ef588a ("secretmem: test: add basic selftest for memfd_secret(2)") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Closes: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/ Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/bpf: Remove tests for zeroed-array kptrHou Tao
bpf_mem_alloc() doesn't support zero-sized allocation, so removing these tests from test_bpf_ma test. After the removal, there will no definition for bin_data_8, so remove 8 from data_sizes array and adjust the index of data_btf_ids array in all test cases accordingly. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20231216131052.27621-3-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-20selftests: vxlan_mdb: Add MDB bulk deletion testIdo Schimmel
Add test cases to verify the behavior of the MDB bulk deletion functionality in the VXLAN driver. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-20selftests: bridge_mdb: Add MDB bulk deletion testIdo Schimmel
Add test cases to verify the behavior of the MDB bulk deletion functionality in the bridge driver. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19selftests/bpf: Close cgrp fd before calling cleanup_cgroup_environment()Hou Tao
There is error log when htab-mem benchmark completes. The error log looks as follows: $ ./bench htab-mem -d1 Setting up benchmark 'htab-mem'... Benchmark 'htab-mem' started. ...... (cgroup_helpers.c:353: errno: Device or resource busy) umount cgroup2 Fix it by closing cgrp fd before invoking cleanup_cgroup_environment(). Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20231219135727.2661527-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19selftests/bpf: add freplace of BTF-unreliable main prog testAndrii Nakryiko
Add a test validating that freplace'ing another main (entry) BPF program fails if the target BPF program doesn't have valid/expected func proto BTF. We extend fexit_bpf2bpf test to allow to specify expected log message for negative test cases (where freplace program is expected to fail to load). Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231215011334.2307144-11-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19selftests/bpf: add global subprog annotation testsAndrii Nakryiko
Add test cases to validate semantics of global subprog argument annotations: - non-null pointers; - context argument; - const dynptr passing; - packet pointers (data, metadata, end). Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231215011334.2307144-10-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19bpf: reuse subprog argument parsing logic for subprog call checksAndrii Nakryiko
Remove duplicated BTF parsing logic when it comes to subprog call check. Instead, use (potentially cached) results of btf_prepare_func_args() to abstract away expectations of each subprog argument in generic terms (e.g., "this is pointer to context", or "this is a pointer to memory of size X"), and then use those simple high-level argument type expectations to validate actual register states to check if they match expectations. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231215011334.2307144-6-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19bpf: reuse btf_prepare_func_args() check for main program BTF validationAndrii Nakryiko
Instead of btf_check_subprog_arg_match(), use btf_prepare_func_args() logic to validate "trustworthiness" of main BPF program's BTF information, if it is present. We ignored results of original BTF check anyway, often times producing confusing and ominously-sounding "reg type unsupported for arg#0 function" message, which has no apparent effect on program correctness and verification process. All the -EFAULT returning sanity checks are already performed in check_btf_info_early(), so there is zero reason to have this duplication of logic between btf_check_subprog_call() and btf_check_subprog_arg_match(). Dropping btf_check_subprog_arg_match() simplifies btf_check_func_arg_match() further removing `bool processing_call` flag. One subtle bit that was done by btf_check_subprog_arg_match() was potentially marking main program's BTF as unreliable. We do this explicitly now with a dedicated simple check, preserving the original behavior, but now based on well factored btf_prepare_func_args() logic. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231215011334.2307144-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19selftests/bpf: add testcase to verifier_bounds.c for BPF_JNEMenglong Dong
Add testcase for the logic that the verifier tracks the BPF_JNE for regs. The assembly function "reg_not_equal_const()" and "reg_equal_const" that we add is exactly converted from the following case: u32 a = bpf_get_prandom_u32(); u64 b = 0; a %= 8; /* the "a > 0" here will be optimized to "a != 0" */ if (a > 0) { /* now the range of a should be [1, 7] */ bpf_skb_store_bytes(skb, 0, &b, a, 0); } Signed-off-by: Menglong Dong <menglong8.dong@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231219134800.1550388-5-menglong8.dong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19selftests/bpf: activate the OP_NE logic in range_cond()Menglong Dong
The edge range checking for the registers is supported by the verifier now, so we can activate the extended logic in tools/testing/selftests/bpf/prog_tests/reg_bounds.c/range_cond() to test such logic. Besides, I added some cases to the "crafted_cases" array for this logic. These cases are mainly used to test the edge of the src reg and dst reg. All reg bounds testings has passed in the SLOW_TESTS mode: $ export SLOW_TESTS=1 && ./test_progs -t reg_bounds -j Summary: 65/18959832 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Menglong Dong <menglong8.dong@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231219134800.1550388-4-menglong8.dong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19selftests/bpf: remove reduplicated s32 casting in "crafted_cases"Menglong Dong
The "S32_MIN" is already defined with s32 casting, so there is no need to do it again. Signed-off-by: Menglong Dong <menglong8.dong@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231219134800.1550388-3-menglong8.dong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-20HID: wacom: Add additional tests of confidence behaviorJason Gerecke
Test for proper driver behavior when the touch confidence bit is set or cleared. Test the three flavors of touch confidence loss (tipswitch cleared before confidence, tipswitch and confidence cleared at the same time, and tipswitch only cleared when touch is actually removed). Also test two flavors of touch confidence gain (confidence added to a touch that was "never" confident, and confidence added to a touch that was previously confident). Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-12-19Revert BPF token-related functionalityAndrii Nakryiko
This patch includes the following revert (one conflicting BPF FS patch and three token patch sets, represented by merge commits): - revert 0f5d5454c723 "Merge branch 'bpf-fs-mount-options-parsing-follow-ups'"; - revert 750e785796bb "bpf: Support uid and gid when mounting bpffs"; - revert 733763285acf "Merge branch 'bpf-token-support-in-libbpf-s-bpf-object'"; - revert c35919dcce28 "Merge branch 'bpf-token-and-bpf-fs-based-delegation'". Link: https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2023-12-19tracing/selftests: Add test to test the trace_markerSteven Rostedt (Google)
Add a test that writes longs strings, some over the size of the sub buffer and make sure that the entire content is there. Link: https://lore.kernel.org/linux-trace-kernel/20231213111527.6a4c9b58@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-19selftests: add vlan hw filter testsLiu Jian
Add one basic vlan hw filter test. Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19kselftest/arm64: Don't probe the current VL for unsupported vector typesMark Brown
The vec-syscfg selftest verifies that setting the VL of the currently tested vector type does not disrupt the VL of the other vector type. To do this it records the current vector length for each type but neglects to guard this with a check for that vector type actually being supported. Add one, using a helper function which we also update all the other instances of this pattern. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231218-kselftest-arm64-vec-syscfg-rdvl-v1-1-0ac22d47e81f@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2023-12-18Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-12-18 This PR is larger than usual and contains changes in various parts of the kernel. The main changes are: 1) Fix kCFI bugs in BPF, from Peter Zijlstra. End result: all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y. 2) Introduce BPF token object, from Andrii Nakryiko. It adds an ability to delegate a subset of BPF features from privileged daemon (e.g., systemd) through special mount options for userns-bound BPF FS to a trusted unprivileged application. The design accommodates suggestions from Christian Brauner and Paul Moore. Example: $ sudo mkdir -p /sys/fs/bpf/token $ sudo mount -t bpf bpffs /sys/fs/bpf/token \ -o delegate_cmds=prog_load:MAP_CREATE \ -o delegate_progs=kprobe \ -o delegate_attachs=xdp 3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei. - Complete precision tracking support for register spills - Fix verification of possibly-zero-sized stack accesses - Fix access to uninit stack slots - Track aligned STACK_ZERO cases as imprecise spilled registers. It improves the verifier "instructions processed" metric from single digit to 50-60% for some programs. - Fix verifier retval logic 4) Support for VLAN tag in XDP hints, from Larysa Zaremba. 5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu. End result: better memory utilization and lower I$ miss for calls to BPF via BPF trampoline. 6) Fix race between BPF prog accessing inner map and parallel delete, from Hou Tao. 7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu. It allows BPF interact with IPSEC infra. The intent is to support software RSS (via XDP) for the upcoming ipsec pcpu work. Experiments on AWS demonstrate single tunnel pcpu ipsec reaching line rate on 100G ENA nics. 8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao. 9) BPF file verification via fsverity, from Song Liu. It allows BPF progs get fsverity digest. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits) bpf: Ensure precise is reset to false in __mark_reg_const_zero() selftests/bpf: Add more uprobe multi fail tests bpf: Fail uprobe multi link with negative offset selftests/bpf: Test the release of map btf s390/bpf: Fix indirect trampoline generation selftests/bpf: Temporarily disable dummy_struct_ops test on s390 x86/cfi,bpf: Fix bpf_exception_cb() signature bpf: Fix dtor CFI cfi: Add CFI_NOSEAL() x86/cfi,bpf: Fix bpf_struct_ops CFI x86/cfi,bpf: Fix bpf_callback_t CFI x86/cfi,bpf: Fix BPF JIT call cfi: Flip headers selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment bpf: Limit the number of kprobes when attaching program to multiple kprobes bpf: Limit the number of uprobes when attaching program to multiple uprobes bpf: xdp: Register generic_kfunc_set with XDP programs selftests/bpf: utilize string values for delegate_xxx mount options ... ==================== Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18bpf: Ensure precise is reset to false in __mark_reg_const_zero()Andrii Nakryiko
It is safe to always start with imprecise SCALAR_VALUE register. Previously __mark_reg_const_zero() relied on caller to reset precise mark, but it's very error prone and we already missed it in a few places. So instead make __mark_reg_const_zero() reset precision always, as it's a safe default for SCALAR_VALUE. Explanation is basically the same as for why we are resetting (or rather not setting) precision in current state. If necessary, precision propagation will set it to precise correctly. As such, also remove a big comment about forward precision propagation in mark_reg_stack_read() and avoid unnecessarily setting precision to true after reading from STACK_ZERO stack. Again, precision propagation will correctly handle this, if that SCALAR_VALUE register will ever be needed to be precise. Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231218173601.53047-1-andrii@kernel.org
2023-12-18selftests/bpf: Add more uprobe multi fail testsJiri Olsa
We fail to create uprobe if we pass negative offset. Add more tests validating kernel-side error checking code. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/bpf/20231217215538.3361991-3-jolsa@kernel.org
2023-12-18selftests/bpf: Test the release of map btfHou Tao
When there is bpf_list_head or bpf_rb_root field in map value, the free of map btf and the free of map value may run concurrently and there may be use-after-free problem, so add two test cases to demonstrate it. And the use-after-free problem can been easily reproduced by using bpf_next tree and a KASAN-enabled kernel. The first test case tests the racing between the free of map btf and the free of array map. It constructs the racing by releasing the array map in the end after other ref-counter of map btf has been released. To delay the free of array map and make it be invoked after btf_free_rcu() is invoked, it stresses system_unbound_wq by closing multiple percpu array maps before it closes the array map. The second case tests the racing between the free of map btf and the free of inner map. Beside using the similar method as the first one does, it uses bpf_map_delete_elem() to delete the inner map and to defer the release of inner map after one RCU grace period. The reason for using two skeletons is to prevent the release of outer map and inner map in map_in_map_btf.c interfering the release of bpf map in normal_map_btf.c. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20231216035510.4030605-1-houtao@huaweicloud.com
2023-12-18s390/bpf: Fix indirect trampoline generationAlexei Starovoitov
The func_addr used to be NULL for indirect trampolines used by struct_ops. Now func_addr is a valid function pointer. Hence use BPF_TRAMP_F_INDIRECT flag to detect such condition. Fixes: 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/bpf/20231216004549.78355-1-alexei.starovoitov@gmail.com
2023-12-18kselftest: alsa: fixed a print formatting warningGhanshyam Agrawal
A statement used %d print formatter where %s should have been used. The same has been fixed in this commit. Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com> Link: 5aaf9efffc57 ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest") Link: https://lore.kernel.org/r/20231217080019.1063476-1-ghanshyam1898@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-17selftests: mptcp: join: fix subflow_send_ack lookupGeliang Tang
MPC backups tests will skip unexpected sometimes (For example, when compiling kernel with an older version of gcc, such as gcc-8), since static functions like mptcp_subflow_send_ack also be listed in /proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global function): > grep "mptcp_subflow_send_ack" /proc/kallsyms 0000000000000000 T __pfx___mptcp_subflow_send_ack 0000000000000000 T __mptcp_subflow_send_ack 0000000000000000 t __pfx_mptcp_subflow_send_ack 0000000000000000 t mptcp_subflow_send_ack In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$" will be false, MPC backups tests will skip. This is not what we expected. The correct logic here should be: if mptcp_subflow_send_ack is not a global function in /proc/kallsyms, do these MPC backups tests. So a 'T' must be added in front of mptcp_subflow_send_ack. Fixes: 632978f0a961 ("selftests: mptcp: join: skip MPC backups tests if not supported") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <geliang.tang@linux.dev> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP-AO key-management testDmitry Safonov
Check multiple keys on a socket: - rotation on closed socket - current/rnext operations shouldn't be possible on listen sockets - current/rnext key set should be the one, that's used on connect() - key rotations with pseudo-random generated keys - copying matching keys on connect() and on accept() At this moment there are 3 tests that are "expected" to fail: a kernel fix is needed to improve the situation, they are marked XFAIL. Sample output: > # ./key-management_ipv4 > 1..120 > # 1601[lib/setup.c:239] rand seed 1700526653 > TAP version 13 > ok 1 closed socket, delete a key: the key was deleted > ok 2 closed socket, delete all keys: the key was deleted > ok 3 closed socket, delete current key: key deletion was prevented > ok 4 closed socket, delete rnext key: key deletion was prevented > ok 5 closed socket, delete a key + set current/rnext: the key was deleted > ok 6 closed socket, force-delete current key: the key was deleted > ok 7 closed socket, force-delete rnext key: the key was deleted > ok 8 closed socket, delete current+rnext key: key deletion was prevented > ok 9 closed socket, add + change current key > ok 10 closed socket, add + change rnext key > ok 11 listen socket, delete a key: the key was deleted > ok 12 listen socket, delete all keys: the key was deleted > ok 13 listen socket, setting current key not allowed > ok 14 listen socket, setting rnext key not allowed > ok 15 # XFAIL listen() after current/rnext keys set: the socket has current/rnext keys: 100:200 > ok 16 # XFAIL listen socket, delete current key from before listen(): failed to delete the key 100:100 -16 > ok 17 # XFAIL listen socket, delete rnext key from before listen(): failed to delete the key 200:200 -16 > ok 18 listen socket, getsockopt(TCP_AO_REPAIR) is restricted > ok 19 listen socket, setsockopt(TCP_AO_REPAIR) is restricted > ok 20 listen socket, delete a key + set current/rnext: key deletion was prevented > ok 21 listen socket, force-delete current key: key deletion was prevented > ok 22 listen socket, force-delete rnext key: key deletion was prevented > ok 23 listen socket, delete a key: the key was deleted > ok 24 listen socket, add + change current key > ok 25 listen socket, add + change rnext key > ok 26 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations > ok 27 client: Check current/rnext keys unset before connect(): current key 19 as expected > ok 28 client: Check current/rnext keys unset before connect(): rnext key 146 as expected > ok 29 server: Check current/rnext keys unset before connect(): server alive > ok 30 server: Check current/rnext keys unset before connect(): passed counters checks > ok 31 client: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations > ok 32 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations > ok 33 server: Check current/rnext keys unset before connect(): passed counters checks > ok 34 client: Check current/rnext keys unset before connect(): passed counters checks > ok 35 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations > ok 36 server: Check current/rnext keys set before connect(): server alive > ok 37 server: Check current/rnext keys set before connect(): passed counters checks > ok 38 client: Check current/rnext keys set before connect(): current key 10 as expected > ok 39 client: Check current/rnext keys set before connect(): rnext key 137 as expected > ok 40 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations > ok 41 client: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations > ok 42 client: Check current/rnext keys set before connect(): passed counters checks > ok 43 server: Check current/rnext keys set before connect(): passed counters checks > ok 44 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations > ok 45 server: Check current != rnext keys set before connect(): server alive > ok 46 server: Check current != rnext keys set before connect(): passed counters checks > ok 47 client: Check current != rnext keys set before connect(): current key 10 as expected > ok 48 client: Check current != rnext keys set before connect(): rnext key 132 as expected > ok 49 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations > ok 50 client: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations > ok 51 client: Check current != rnext keys set before connect(): passed counters checks > ok 52 server: Check current != rnext keys set before connect(): passed counters checks > ok 53 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations > ok 54 server: Check current flapping back on peer's RnextKey request: server alive > ok 55 server: Check current flapping back on peer's RnextKey request: passed counters checks > ok 56 client: Check current flapping back on peer's RnextKey request: current key 10 as expected > ok 57 client: Check current flapping back on peer's RnextKey request: rnext key 132 as expected > ok 58 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations > ok 59 client: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations > ok 60 server: Check current flapping back on peer's RnextKey request: passed counters checks > ok 61 client: Check current flapping back on peer's RnextKey request: passed counters checks > ok 62 server: Rotate over all different keys: The socket keys are consistent with the expectations > ok 63 server: Rotate over all different keys: server alive > ok 64 server: Rotate over all different keys: passed counters checks > ok 65 server: Rotate over all different keys: current key 128 as expected > ok 66 client: Rotate over all different keys: rnext key 128 as expected > ok 67 server: Rotate over all different keys: current key 129 as expected > ok 68 client: Rotate over all different keys: rnext key 129 as expected > ok 69 server: Rotate over all different keys: current key 130 as expected > ok 70 client: Rotate over all different keys: rnext key 130 as expected > ok 71 server: Rotate over all different keys: current key 131 as expected > ok 72 client: Rotate over all different keys: rnext key 131 as expected > ok 73 server: Rotate over all different keys: current key 132 as expected > ok 74 client: Rotate over all different keys: rnext key 132 as expected > ok 75 server: Rotate over all different keys: current key 133 as expected > ok 76 client: Rotate over all different keys: rnext key 133 as expected > ok 77 server: Rotate over all different keys: current key 134 as expected > ok 78 client: Rotate over all different keys: rnext key 134 as expected > ok 79 server: Rotate over all different keys: current key 135 as expected > ok 80 client: Rotate over all different keys: rnext key 135 as expected > ok 81 server: Rotate over all different keys: current key 136 as expected > ok 82 client: Rotate over all different keys: rnext key 136 as expected > ok 83 server: Rotate over all different keys: current key 137 as expected > ok 84 client: Rotate over all different keys: rnext key 137 as expected > ok 85 server: Rotate over all different keys: current key 138 as expected > ok 86 client: Rotate over all different keys: rnext key 138 as expected > ok 87 server: Rotate over all different keys: current key 139 as expected > ok 88 client: Rotate over all different keys: rnext key 139 as expected > ok 89 server: Rotate over all different keys: current key 140 as expected > ok 90 client: Rotate over all different keys: rnext key 140 as expected > ok 91 server: Rotate over all different keys: current key 141 as expected > ok 92 client: Rotate over all different keys: rnext key 141 as expected > ok 93 server: Rotate over all different keys: current key 142 as expected > ok 94 client: Rotate over all different keys: rnext key 142 as expected > ok 95 server: Rotate over all different keys: current key 143 as expected > ok 96 client: Rotate over all different keys: rnext key 143 as expected > ok 97 server: Rotate over all different keys: current key 144 as expected > ok 98 client: Rotate over all different keys: rnext key 144 as expected > ok 99 server: Rotate over all different keys: current key 145 as expected > ok 100 client: Rotate over all different keys: rnext key 145 as expected > ok 101 server: Rotate over all different keys: current key 146 as expected > ok 102 client: Rotate over all different keys: rnext key 146 as expected > ok 103 server: Rotate over all different keys: current key 127 as expected > ok 104 client: Rotate over all different keys: rnext key 127 as expected > ok 105 client: Rotate over all different keys: current key 0 as expected > ok 106 client: Rotate over all different keys: rnext key 127 as expected > ok 107 server: Rotate over all different keys: The socket keys are consistent with the expectations > ok 108 client: Rotate over all different keys: The socket keys are consistent with the expectations > ok 109 client: Rotate over all different keys: passed counters checks > ok 110 server: Rotate over all different keys: passed counters checks > ok 111 server: Check accept() => established key matching: The socket keys are consistent with the expectations > ok 112 Can't add a key with non-matching ip-address for established sk > ok 113 Can't add a key with non-matching VRF for established sk > ok 114 server: Check accept() => established key matching: server alive > ok 115 server: Check accept() => established key matching: passed counters checks > ok 116 client: Check connect() => established key matching: current key 0 as expected > ok 117 client: Check connect() => established key matching: rnext key 128 as expected > ok 118 client: Check connect() => established key matching: The socket keys are consistent with the expectations > ok 119 server: Check accept() => established key matching: The socket keys are consistent with the expectations > ok 120 server: Check accept() => established key matching: passed counters checks > # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP-AO selfconnect/simultaneous connect testDmitry Safonov
Check that a rare functionality of TCP named self-connect works with TCP-AO. This "under the cover" also checks TCP simultaneous connect (TCP_SYN_RECV socket state), which would be harder to check other ways. In order to verify that it's indeed TCP simultaneous connect, check the counters TCPChallengeACK and TCPSYNChallenge. Sample of the output: > # ./self-connect_ipv6 > 1..4 > # 1738[lib/setup.c:254] rand seed 1696451931 > TAP version 13 > ok 1 self-connect(same keyids): connect TCPAOGood 0 => 24 > ok 2 self-connect(different keyids): connect TCPAOGood 26 => 50 > ok 3 self-connect(restore): connect TCPAOGood 52 => 97 > ok 4 self-connect(restore, different keyids): connect TCPAOGood 99 => 144 > # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP-AO RST testDmitry Safonov
Check that both active and passive reset works and correctly sign segments with TCP-AO or don't send RSTs if not possible to sign. A listening socket with backlog = 0 gets one connection in accept queue, another in syn queue. Once the server/listener socket is forcibly closed, client sockets aren't connected to anything. In regular situation they would receive RST on any segment, but with TCP-AO as there's no listener, no AO-key and unknown ISNs, no RST should be sent. And "passive" reset, where RST is sent on reply for some segment (tcp_v{4,6}_send_reset()) - there use TCP_REPAIR to corrupt SEQ numbers, which later results in TCP-AO signed RST, which will be verified and client socket will get EPIPE. No TCPAORequired/TCPAOBad segments are expected during these tests. Sample of the output: > # ./rst_ipv4 > 1..15 > # 1462[lib/setup.c:254] rand seed 1686611171 > TAP version 13 > ok 1 servered 1000 bytes > ok 2 Verified established tcp connection > ok 3 sk[0] = 7, connection was reset > ok 4 sk[1] = 8, connection was reset > ok 5 sk[2] = 9 > ok 6 MKT counters are good on server > ok 7 Verified established tcp connection > ok 8 client connection broken post-seq-adjust > ok 9 client connection was reset > ok 10 No segments without AO sign (server) > ok 11 Signed AO segments (server): 0 => 30 > ok 12 No segments with bad AO sign (server) > ok 13 No segments without AO sign (client) > ok 14 Signed AO segments (client): 0 => 30 > ok 15 No segments with bad AO sign (client) > # Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add SEQ number extension testDmitry Safonov
Check that on SEQ number wraparound there is no disruption or TCPAOBad segments produced. Sample of expected output: > # ./seq-ext_ipv4 > 1..7 > # 1436[lib/setup.c:254] rand seed 1686611079 > TAP version 13 > ok 1 server alive > ok 2 post-migrate connection alive > ok 3 TCPAOGood counter increased 1002 => 3002 > ok 4 TCPAOGood counter increased 1003 => 3003 > ok 5 TCPAOBad counter didn't increase > ok 6 TCPAOBad counter didn't increase > ok 7 SEQ extension incremented: 1/1999, 1/998999 > # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP_REPAIR TCP-AO testsDmitry Safonov
The test plan is: 1. check that TCP-AO connection may be restored on another socket 2. check restore with wrong send/recv ISN (checking that they are part of MAC generation) 3. check restore with wrong SEQ number extension (checking that high bytes of it taken into MAC generation) Sample output expected: > # ./restore_ipv4 > 1..20 > # 1412[lib/setup.c:254] rand seed 1686610825 > TAP version 13 > ok 1 TCP-AO migrate to another socket: server alive > ok 2 TCP-AO migrate to another socket: post-migrate connection is alive > ok 3 TCP-AO migrate to another socket: counter TCPAOGood increased 23 => 44 > ok 4 TCP-AO migrate to another socket: counter TCPAOGood increased 22 => 42 > ok 5 TCP-AO with wrong send ISN: server couldn't serve > ok 6 TCP-AO with wrong send ISN: post-migrate connection is broken > ok 7 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 4 > ok 8 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 3 > ok 9 TCP-AO with wrong receive ISN: server couldn't serve > ok 10 TCP-AO with wrong receive ISN: post-migrate connection is broken > ok 11 TCP-AO with wrong receive ISN: counter TCPAOBad increased 4 => 8 > ok 12 TCP-AO with wrong receive ISN: counter TCPAOBad increased 5 => 10 > ok 13 TCP-AO with wrong send SEQ ext number: server couldn't serve > ok 14 TCP-AO with wrong send SEQ ext number: post-migrate connection is broken > ok 15 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 9 => 10 > ok 16 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 11 => 19 > ok 17 TCP-AO with wrong receive SEQ ext number: post-migrate connection is broken > ok 18 TCP-AO with wrong receive SEQ ext number: server couldn't serve > ok 19 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 10 => 18 > ok 20 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 20 => 23 > # Totals: pass:20 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add test/benchmark for removing MKTsDmitry Safonov
Sample output: > 1..36 > # 1106[lib/setup.c:207] rand seed 1660754406 > TAP version 13 > ok 1 Worst case connect 512 keys: min=0ms max=1ms mean=0.583329ms stddev=0.076376 > ok 2 Connect random-search 512 keys: min=0ms max=1ms mean=0.53412ms stddev=0.0516779 > ok 3 Worst case delete 512 keys: min=2ms max=11ms mean=6.04139ms stddev=0.245792 > ok 4 Add a new key 512 keys: min=0ms max=13ms mean=0.673415ms stddev=0.0820618 > ok 5 Remove random-search 512 keys: min=5ms max=9ms mean=6.65969ms stddev=0.258064 > ok 6 Remove async 512 keys: min=0ms max=0ms mean=0.041825ms stddev=0.0204512 > ok 7 Worst case connect 1024 keys: min=0ms max=2ms mean=0.520357ms stddev=0.0721358 > ok 8 Connect random-search 1024 keys: min=0ms max=2ms mean=0.535312ms stddev=0.0517355 > ok 9 Worst case delete 1024 keys: min=5ms max=9ms mean=8.27219ms stddev=0.287614 > ok 10 Add a new key 1024 keys: min=0ms max=1ms mean=0.688121ms stddev=0.0829531 > ok 11 Remove random-search 1024 keys: min=5ms max=9ms mean=8.37649ms stddev=0.289422 > ok 12 Remove async 1024 keys: min=0ms max=0ms mean=0.0457096ms stddev=0.0213798 > ok 13 Worst case connect 2048 keys: min=0ms max=2ms mean=0.748804ms stddev=0.0865335 > ok 14 Connect random-search 2048 keys: min=0ms max=2ms mean=0.782993ms stddev=0.0625697 > ok 15 Worst case delete 2048 keys: min=5ms max=10ms mean=8.23106ms stddev=0.286898 > ok 16 Add a new key 2048 keys: min=0ms max=1ms mean=0.812988ms stddev=0.0901658 > ok 17 Remove random-search 2048 keys: min=8ms max=9ms mean=8.84949ms stddev=0.297481 > ok 18 Remove async 2048 keys: min=0ms max=0ms mean=0.0297223ms stddev=0.0172402 > ok 19 Worst case connect 4096 keys: min=1ms max=5ms mean=1.53352ms stddev=0.123836 > ok 20 Connect random-search 4096 keys: min=1ms max=5ms mean=1.52226ms stddev=0.0872429 > ok 21 Worst case delete 4096 keys: min=5ms max=9ms mean=8.25874ms stddev=0.28738 > ok 22 Add a new key 4096 keys: min=0ms max=3ms mean=1.67382ms stddev=0.129376 > ok 23 Remove random-search 4096 keys: min=5ms max=10ms mean=8.26178ms stddev=0.287433 > ok 24 Remove async 4096 keys: min=0ms max=0ms mean=0.0340009ms stddev=0.0184393 > ok 25 Worst case connect 8192 keys: min=2ms max=4ms mean=2.86208ms stddev=0.169177 > ok 26 Connect random-search 8192 keys: min=2ms max=4ms mean=2.87592ms stddev=0.119915 > ok 27 Worst case delete 8192 keys: min=6ms max=11ms mean=7.55291ms stddev=0.274826 > ok 28 Add a new key 8192 keys: min=1ms max=5ms mean=2.56797ms stddev=0.160249 > ok 29 Remove random-search 8192 keys: min=5ms max=10ms mean=7.14002ms stddev=0.267208 > ok 30 Remove async 8192 keys: min=0ms max=0ms mean=0.0320066ms stddev=0.0178904 > ok 31 Worst case connect 16384 keys: min=5ms max=6ms mean=5.55334ms stddev=0.235655 > ok 32 Connect random-search 16384 keys: min=5ms max=6ms mean=5.52614ms stddev=0.166225 > ok 33 Worst case delete 16384 keys: min=5ms max=11ms mean=7.39109ms stddev=0.271866 > ok 34 Add a new key 16384 keys: min=2ms max=4ms mean=3.35799ms stddev=0.183248 > ok 35 Remove random-search 16384 keys: min=5ms max=8ms mean=6.86078ms stddev=0.261931 > ok 36 Remove async 16384 keys: min=0ms max=0ms mean=0.0302384ms stddev=0.0173892 > # Totals: pass:36 fail:0 xfail:0 xpass:0 skip:0 error:0 >From the output it's visible that the current simplified approach with linked-list of MKTs scales quite fine even for thousands of keys. And that also means that the majority of the time for delete is eaten by synchronize_rcu() [which I can confirm separately by tracing]. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP-AO + TCP-MD5 + no sign listen socket testsDmitry Safonov
The test plan was (most of tests have all 3 client types): 1. TCP-AO listen (INADDR_ANY) 2. TCP-MD5 listen (INADDR_ANY) 3. non-signed listen (INADDR_ANY) 4. TCP-AO + TCP-MD5 listen (prefix) 5. TCP-AO subprefix add failure [checked in setsockopt-closed.c] 6. TCP-AO out of prefix connect [checked in connect-deny.c] 7. TCP-AO + TCP-MD5 on connect() 8. TCP-AO intersect with TCP-MD5 failure 9. Established TCP-AO: add TCP-MD5 key 10. Established TCP-MD5: add TCP-AO key 11. Established non-signed: add TCP-AO key Output produced: > # ./unsigned-md5_ipv6 > 1..72 > # 1592[lib/setup.c:239] rand seed 1697567046 > TAP version 13 > ok 1 AO server (INADDR_ANY): AO client: counter TCPAOGood increased 0 => 2 > ok 2 AO server (INADDR_ANY): AO client: connected > ok 3 AO server (INADDR_ANY): MD5 client > ok 4 AO server (INADDR_ANY): MD5 client: counter TCPMD5Unexpected increased 0 => 1 > ok 5 AO server (INADDR_ANY): no sign client: counter TCPAORequired increased 0 => 1 > ok 6 AO server (INADDR_ANY): unsigned client > ok 7 AO server (AO_REQUIRED): AO client: connected > ok 8 AO server (AO_REQUIRED): AO client: counter TCPAOGood increased 4 => 6 > ok 9 AO server (AO_REQUIRED): unsigned client > ok 10 AO server (AO_REQUIRED): unsigned client: counter TCPAORequired increased 1 => 2 > ok 11 MD5 server (INADDR_ANY): AO client: counter TCPAOKeyNotFound increased 0 => 1 > ok 12 MD5 server (INADDR_ANY): AO client > ok 13 MD5 server (INADDR_ANY): MD5 client: connected > ok 14 MD5 server (INADDR_ANY): MD5 client: no counter checks > ok 15 MD5 server (INADDR_ANY): no sign client > ok 16 MD5 server (INADDR_ANY): no sign client: counter TCPMD5NotFound increased 0 => 1 > ok 17 no sign server: AO client > ok 18 no sign server: AO client: counter TCPAOKeyNotFound increased 1 => 2 > ok 19 no sign server: MD5 client > ok 20 no sign server: MD5 client: counter TCPMD5Unexpected increased 1 => 2 > ok 21 no sign server: no sign client: connected > ok 22 no sign server: no sign client: counter CurrEstab increased 0 => 1 > ok 23 AO+MD5 server: AO client (matching): connected > ok 24 AO+MD5 server: AO client (matching): counter TCPAOGood increased 8 => 10 > ok 25 AO+MD5 server: AO client (misconfig, matching MD5) > ok 26 AO+MD5 server: AO client (misconfig, matching MD5): counter TCPAOKeyNotFound increased 2 => 3 > ok 27 AO+MD5 server: AO client (misconfig, non-matching): counter TCPAOKeyNotFound increased 3 => 4 > ok 28 AO+MD5 server: AO client (misconfig, non-matching) > ok 29 AO+MD5 server: MD5 client (matching): connected > ok 30 AO+MD5 server: MD5 client (matching): no counter checks > ok 31 AO+MD5 server: MD5 client (misconfig, matching AO) > ok 32 AO+MD5 server: MD5 client (misconfig, matching AO): counter TCPMD5Unexpected increased 2 => 3 > ok 33 AO+MD5 server: MD5 client (misconfig, non-matching) > ok 34 AO+MD5 server: MD5 client (misconfig, non-matching): counter TCPMD5Unexpected increased 3 => 4 > ok 35 AO+MD5 server: no sign client (unmatched): connected > ok 36 AO+MD5 server: no sign client (unmatched): counter CurrEstab increased 0 => 1 > ok 37 AO+MD5 server: no sign client (misconfig, matching AO) > ok 38 AO+MD5 server: no sign client (misconfig, matching AO): counter TCPAORequired increased 2 => 3 > ok 39 AO+MD5 server: no sign client (misconfig, matching MD5) > ok 40 AO+MD5 server: no sign client (misconfig, matching MD5): counter TCPMD5NotFound increased 1 => 2 > ok 41 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: connect() was prevented > ok 42 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: no counter checks > ok 43 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: connect() was prevented > ok 44 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: no counter checks > ok 45 TCP-AO established: add TCP-MD5 key: postfailed as expected > ok 46 TCP-AO established: add TCP-MD5 key: counter TCPAOGood increased 12 => 14 > ok 47 TCP-MD5 established: add TCP-AO key: postfailed as expected > ok 48 TCP-MD5 established: add TCP-AO key: no counter checks > ok 49 non-signed established: add TCP-AO key: postfailed as expected > ok 50 non-signed established: add TCP-AO key: counter CurrEstab increased 0 => 1 > ok 51 TCP-AO key intersects with existing TCP-MD5 key: prefailed as expected: Key was rejected by service > ok 52 TCP-MD5 key intersects with existing TCP-AO key: prefailed as expected: Key was rejected by service > ok 53 TCP-MD5 key + TCP-AO required: prefailed as expected: Key was rejected by service > ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service > ok 55 VRF: TCP-AO key (no l3index) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service > ok 56 VRF: TCP-MD5 key (no l3index) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service > ok 57 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service > ok 58 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service > ok 59 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service > ok 60 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service > ok 61 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service > ok 62 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service > ok 63 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service > ok 64 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service > ok 65 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=N) > ok 66 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=0) > ok 67 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service > ok 68 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service > ok 69 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=0) > ok 70 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=N) > ok 71 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service > ok 72 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service > # Totals: pass:72 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-30 15:13:29 +0000