| Age | Commit message (Collapse) | Author |
|---|
|
The test configures a policer with a rate of 80Mbps and expects to
measure a rate close to it. This is a too high rate for debug kernels,
causing the test to fail [1].
Fix by reducing the rate to 10Mbps.
[1]
# ./tc_police.sh
TEST: police on rx [FAIL]
Expected rate 76.2Mbps, got 29.6Mbps, which is -61% off. Required accuracy is +-10%.
TEST: police on tx [FAIL]
Expected rate 76.2Mbps, got 30.4Mbps, which is -60% off. Required accuracy is +-10%.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The various multipath tests use mausezahn to generate different flows
and check how they are distributed between the available nexthops. The
tool is currently invoked with an hard coded transmission delay of 1 ms.
This is unnecessary when the tests are run with veth pairs and
needlessly prolongs the tests.
Parametrize this delay and default it to 0 us. It can be overridden
using the forwarding.config file. On my system, this reduces the run
time of router_multipath.sh by 93%.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The multipath tests currently test both the L3 and L4 multipath hash
policies for IPv6, but only the L4 policy for IPv4. The reason is mostly
historic: When the initial multipath test was added
(router_multipath.sh) the IPv6 L4 policy did not exist and was later
added to the test. The other multipath tests copied this pattern
although there is little value in testing both policies.
Align the IPv4 and IPv6 tests and only test the L4 policy. On my system,
this reduces the run time of router_multipath.sh by 89% because of the
repeated ping6 invocations to randomize the flow label.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the dependsOn test check for all the mirred blockcast tests.
It will prevent the issue reported by LKFT which happens when an older
iproute2 is used to run the current tdc.
Tests are skipped if the dependsOn check fails.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20240229143825.1373550-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changes :
- "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh
- "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh
Signed-off-by: Prabhav Kumar Vaish <pvkumar5749404@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228120701.422264-1-pvkumar5749404@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is used to test split_huge_page_to_list_to_order for pagecache THPs.
Also add test cases for split_huge_page_to_list_to_order via both debugfs.
[ziy@nvidia.com: fix issue discovered with NFS]
Link: https://lkml.kernel.org/r/262E4DAA-4A78-4328-B745-1355AE356A07@nvidia.com
Link: https://lkml.kernel.org/r/20240226205534.1603748-9-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Tested-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This binary is missing in the .gitignore and stays as an untracked file.
Link: https://lore.kernel.org/r/20240214-damon_selftest_gitignore-v1-1-f517d0f9f783@gmail.com
Link: https://lkml.kernel.org/r/20240221211148.46522-3-sj@kernel.org
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Singed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Closes: https://lore.kernel.org/all/AS8P193MB1285C963658008F1B2702AF7E4792@AS8P193MB1285.EURP193.PROD.OUTLOOK.COM/
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: misc fixes".
Misc fixes for DAMON selftets on behalf of the original authors.
This patch (of 2):
This patch resolves a spelling error in the test log, preventing potential
confusion.
It is submitted as part of my application to the "Linux Kernel Bug Fixing
Spring Unpaid 2024" mentorship program of the Linux Foundation.
Link: https://lore.kernel.org/r/20240204122523.14160-1-vincenzo.mezzela@gmail.com
Link: https://lkml.kernel.org/r/20240221211148.46522-2-sj@kernel.org
Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Create and load a struct_ops map with a large number of struct_ops
programs to generate trampolines taking a size over multiple pages. The
map includes 40 programs. Their trampolines takes 6.6k+, more than 1.5
pages, on x86.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-4-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add new basic kselftest that checks if the available rust sample modules
can be added and removed correctly.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Sergio Gonzalez Collado <sergio.collado@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In current ping-pong design, xdp_hw_metadata will wait until the packet
transmission completely done, then only start to receive the next packet.
The current sleep interval is 10ms, which is unnecessary large. Typically,
a NIC does not need such a long time to transmit a packet. Furthermore,
during this 10ms sleep time, the app is unable to receive incoming packets.
Therefore, this commit reduce sleep interval to 10us, so that
xdp_hw_metadata is able to support periodic packets with shorter interval.
10us * 500 = 5ms should be enough for packet transmission and status
retrieval.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20240303083225.1184165-2-yoong.siang.song@intel.com
|
|
Settle on three "flavors" of uprobe/uretprobe, installed on different
kinds of instruction: nop, push, and ret. All three are testing
different internal code paths emulating or single-stepping instructions,
so are interesting to compare and benchmark separately.
To ensure `push rbp` instruction we ensure that uprobe_target_push() is
not a leaf function by calling (global __weak) noop function and
returning something afterwards (if we don't do that, compiler will just
do a tail call optimization).
Also, we need to make sure that compiler isn't skipping frame pointer
generation, so let's add `-fno-omit-frame-pointers` to Makefile.
Just to give an idea of where we currently stand in terms of relative
performance of different uprobe/uretprobe cases vs a cheap syscall
(getpgid()) baseline, here are results from my local machine:
$ benchs/run_bench_uprobes.sh
base : 1.561 ± 0.020M/s
uprobe-nop : 0.947 ± 0.007M/s
uprobe-push : 0.951 ± 0.004M/s
uprobe-ret : 0.443 ± 0.007M/s
uretprobe-nop : 0.471 ± 0.013M/s
uretprobe-push : 0.483 ± 0.004M/s
uretprobe-ret : 0.306 ± 0.007M/s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240301214551.1686095-1-andrii@kernel.org
|
|
This patch adds a new helper userspace_pm_get_addr() in mptcp_join.sh.
In it, parse the token value from the output of 'pm_nl_ctl events', then
pass it to pm_nl_ctl get_addr command. Use this helper in userspace pm
dump tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The command get_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl get $id
This patch adds token argument for it to support userspace PM:
pm_nl_ctl get $id token $token
If 'token $token' is passed to get_addr(), copy it into the kernel netlink.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a new helper userspace_pm_dump() to dump addresses
for the userspace PM. Use this helper to check whether an ID 0 subflow
is listed in the output of dump command after creating an ID 0 subflow
in "userspace pm create id 0 subflow" test. Dump userspace PM addresses
list in "userspace pm add & remove address" test and in "userspace pm
create destroy subflow" test.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract the main part of check() in pm_netlink.sh into a new helper
named mptcp_lib_check_output in mptcp_lib.sh.
This helper will be used for userspace dump addresses tests.
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The command dump_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl dump
This patch adds token argument for it to support userspace PM:
pm_nl_ctl dump token $token
If 'token $token' is passed to dump_addr(), copy it into the kernel
netlink.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the address flag MPTCP_PM_ADDR_FLAG_SUBFLOW in csf() in
pm_nl_ctl.c when subflow is created by a userspace PM.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.
If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.
When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.
While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.
Fixes: b4b51d36bbaa ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/r/20240301063754.2ecefecf@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!
So we should do ret=${KSFT_FAIL} instead.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Fixes: 42fb6cddec3b ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix IOMMU table initialisation when doing kdump over SR-IOV
- Fix incorrect RTAS function name for resetting TCE tables
- Fix fpu_signal selftest failures since a recent change
Thanks to Gaurav Batra and Nathan Lynch.
* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix fpu_signal failures
powerpc/rtas: use correct function name for resetting TCE tables
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
|
|
There's an almost identical code sequence to specify load/store access
hints in __copy_tofrom_user_power7(), copypage_power7() and
memcpy_power7().
Move the sequence into a common macro, which is passed the registers to
use as they differ slightly.
There also needs to be a copy in the selftests, it could be shared in
future if the headers are cleaned up / refactored.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122521.762431-1-mpe@ellerman.id.au
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
My recent commit e5d00aaac651 ("selftests/powerpc: Check all FPRs in
fpu_preempt") inadvertently broke the fpu_signal test.
It needs to take into account that fpu_preempt now loads 32 FPRs, so
enlarge darray.
Also use the newly added randomise_darray() to properly randomise darray.
Finally the checking done in signal_fpu_sig() needs to skip checking
f30/f31, because they are used as scratch registers in check_all_fprs(),
called by preempt_fpu(), and so could hold other values when the signal
is taken.
Fixes: e5d00aaac651 ("selftests/powerpc: Check all FPRs in fpu_preempt")
Reported-by: Spoorthy <spoorthy@linux.ibm.com>
Depends-on: 2ba107f6795d ("selftests/powerpc: Generate better bit patterns for FPU tests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240301101035.1230024-1-mpe@ellerman.id.au
|
|
I cleared IFF_NOARP flag from netdevsim dev->flags in order to support
skb forwarding. This breaks the rtnetlink.sh selftest
kci_test_ipsec_offload() test because ipsec does not connect to peers it
cannot transmit to.
Fix the issue by adding a neigh entry manually. ipsec_offload test now
successfully pass.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Connect two netdevsim ports in different namespaces together, then send
packets between them using socat.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SCTP does not support IP_LOCAL_PORT_RANGE and we know it,
so use XFAIL instead of SKIP.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently some tests report skip for things they expect to fail
e.g. when given combination of parameters is known to be unsupported.
This is confusing because in an ideal test environment and fully
featured kernel no tests should be skipped.
Selftest summary line already includes xfail and xpass counters,
e.g.:
Totals: pass:725 fail:0 xfail:0 xpass:0 skip:0 error:0
but there's no way to use it from within the harness.
Add a new per-fixture+variant combination list of test cases
we expect to fail.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Switch to printing KTAP line for PASS / FAIL with ksft_test_result_code(),
this gives us the ability to report diagnostic messages.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ksft_test_result_code()
According to the spec we should always print a # if we add
a diagnostic message. Having the caller pass in the new line
as part of diagnostic message makes handling this a bit
counter-intuitive, so append the new line in the helper.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub points out that for parsers it's rather useful to always
have the test name on the result line. Currently if we SKIP
(or soon XFAIL or XPASS), we will print:
ok 17 # SKIP SCTP doesn't support IP_BIND_ADDRESS_NO_PORT
^
no test name
Always print the test name.
KTAP format seems to allow or even call for it, per:
https://docs.kernel.org/dev-tools/ktap.html
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/all/87jzn6lnou.fsf@cloudflare.com/
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For generic test harness code it's more useful to deal with exit
codes directly, rather than having to switch on them and call
the right ksft_test_result_*() helper. Add such function to kselftest.h.
Note that "directive" and "diagnostic" are what ktap docs call
those parts of the message.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We always use skip in combination with exit_code being 0
(KSFT_PASS). This are basic KSFT / KTAP semantics.
Store the right KSFT_* code in exit_code directly.
This makes it easier to support tests reporting other
extended KSFT_* codes like XFAIL / XPASS.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of tracking passed = 0/1 rename the field to exit_code
and invert the values so that they match the KSFT_* exit codes.
This will allow us to fold SKIP / XFAIL into the same value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since we added variant support generating full test case
name takes 4 string arguments. We're about to need it
in another two places. Stop the duplication and print
once into a temporary buffer.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we no longer need low exit codes to communicate
assertion steps - use normal KSFT exit codes.
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace Landlock-specific TEST_F_FORK() with an improved TEST_F() which
brings four related changes:
Run TEST_F()'s tests in a grandchild process to make it possible to
drop privileges and delegate teardown to the parent.
Compared to TEST_F_FORK(), simplify handling of the test grandchild
process thanks to vfork(2), and makes it generic (e.g. no explicit
conversion between exit code and _metadata).
Compared to TEST_F_FORK(), run teardown even when tests failed with an
assert thanks to commit 63e6b2a42342 ("selftests/harness: Run TEARDOWN
for ASSERT failures").
Simplify the test harness code by removing the no_print and step fields
which are not used. I added this feature just after I made
kselftest_harness.h more broadly available but this step counter
remained even though it wasn't needed after all. See commit 369130b63178
("selftests: Enhance kselftest_harness.h to print which assert failed").
Replace spaces with tabs in one line of __TEST_F_IMPL().
Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This has the effect of creating a new test process for either TEST_F()
or TEST_F_FORK(), which doesn't change tests but will ease potential
backports. See next commit for the TEST_F_FORK() merge into TEST_F().
Cc: Günther Noack <gnoack@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mptcp/protocol.c
adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket")
9426ce476a70 ("mptcp: annotate lockless access for RX path fields")
https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/
Adjacent changes:
drivers/dpll/dpll_core.c
0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()")
e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order")
drivers/net/veth.c
1ce7d306ea63 ("veth: try harder when allocating queue memory")
0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers")
drivers/net/wireless/intel/iwlwifi/mvm/d3.c
8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO")
78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists")
net/wireless/nl80211.c
f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change")
414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change the values of fields, including scalar types and function pointers,
and check if the struct_ops map works as expected.
The test changes the field "test_2" of "testmod_1" from the pointer to
test_2() to pointer to test_3() and the field "data" to 13. The function
test_2() and test_3() both compute a new value for "test_2_result", but in
different way. By checking the value of "test_2_result", it ensures the
struct_ops map works as expected with changes through shadow types.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-6-thinker.li@gmail.com
|
|
Replace deprecated 0-length array in struct bpf_lpm_trie_key with
flexible array. Found with GCC 13:
../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=]
207 | *(__be16 *)&key->data[i]);
| ^~~~~~~~~~~~~
../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16'
102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
| ^
../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu'
97 | #define be16_to_cpu __be16_to_cpu
| ^~~~~~~~~~~~~
../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu'
206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i]
^
| ^~~~~~~~~~~
In file included from ../include/linux/bpf.h:7:
../include/uapi/linux/bpf.h:82:17: note: while referencing 'data'
82 | __u8 data[0]; /* Arbitrary size */
| ^~~~
And found at run-time under CONFIG_FORTIFY_SOURCE:
UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49
index 0 is out of range for type '__u8 [*]'
Changing struct bpf_lpm_trie_key is difficult since has been used by
userspace. For example, in Cilium:
struct egress_gw_policy_key {
struct bpf_lpm_trie_key lpm_key;
__u32 saddr;
__u32 daddr;
};
While direct references to the "data" member haven't been found, there
are static initializers what include the final member. For example,
the "{}" here:
struct egress_gw_policy_key in_key = {
.lpm_key = { 32 + 24, {} },
.saddr = CLIENT_IP,
.daddr = EXTERNAL_SVC_IP & 0Xffffff,
};
To avoid the build time and run time warnings seen with a 0-sized
trailing array for struct bpf_lpm_trie_key, introduce a new struct
that correctly uses a flexible array for the trailing bytes,
struct bpf_lpm_trie_key_u8. As part of this, include the "header"
portion (which is just the "prefixlen" member), so it can be used
by anything building a bpf_lpr_trie_key that has trailing members that
aren't a u8 flexible array (like the self-test[1]), which is named
struct bpf_lpm_trie_key_hdr.
Unfortunately, C++ refuses to parse the __struct_group() helper, so
it is not possible to define struct bpf_lpm_trie_key_hdr directly in
struct bpf_lpm_trie_key_u8, so we must open-code the union directly.
Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out,
and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment
to the UAPI header directing folks to the two new options.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://paste.debian.net/hidden/ca500597/
Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1]
Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.
Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.
There is a day 0 bug in br_netfilter when used with connection tracking.
Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.
For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.
This patch disables NAT and conntrack helpers for multicast packets.
Patch #3 adds a selftest to cover for the br_netfilter bug.
netfilter pull request 24-02-29
* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================
Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
vpmu_counter_access's disable_counter() carries a bug that disables
all the counters that are enabled, instead of just the requested one.
Fortunately, it's not an issue as there are no callers of it. Hence,
instead of fixing it, remove the definition entirely.
Remove enable_counter() as it's unused as well.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20231122221526.2750966-1-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Rename some test cases to avoid overlapping test names which is
problematic for the kernel test robot. No changes in the test's logic.
Suggested-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240227170418.491442-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend sev_smoke_test to also run a minimal SEV-ES smoke test so that it's
possible to test KVM's unique VMRUN=>#VMEXIT path for SEV-ES guests
without needing a full blown SEV-ES capable VM, which requires a rather
absurd amount of properly configured collateral.
Punt on proper GHCB and ucall support, and instead use the GHCB MSR
protocol to signal test completion. The most important thing at this
point is to have _any_ kind of testing of KVM's __svm_sev_es_vcpu_run().
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Carlos Bilbao <carlos.bilbao@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a basic smoke test for SEV guests to verify that KVM can launch an
SEV guest and run a few instructions without exploding. To verify that
SEV is indeed enabled, assert that SEV is reported as enabled in
MSR_AMD64_SEV, a.k.a. SEV_STATUS, which cannot be intercepted by KVM
(architecturally enforced).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Suggested-by: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: rename to "sev_smoke_test"]
Link: https://lore.kernel.org/r/20240223004258.3104051-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Port the existing intra-host SEV(-ES) migration test to the recently added
SEV library, which handles much of the boilerplate needed to create and
configure SEV guests.
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a library/APIs for creating and interfacing with SEV guests, all of
which need some amount of common functionality, e.g. an open file handle
for the SEV driver (/dev/sev), ioctl() wrappers to pass said file handle
to KVM, tracking of the C-bit, etc.
Add an x86-specific hook to initialize address properties, a.k.a. the
location of the C-bit. An arch specific hook is rather gross, but x86
already has a dedicated #ifdef-protected kvm_get_cpu_address_width() hook,
i.e. the ugliest code already exists.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for tagging and untagging guest physical address, e.g. to
allow x86's SEV and TDX guests to embed shared vs. private information in
the GPA. SEV (encryption, a.k.a. C-bit) and TDX (shared, a.k.a. S-bit)
steal bits from the guest's physical address space that is consumed by the
CPU metadata, i.e. effectively aliases the "real" GPA.
Implement generic "tagging" so that the shared vs. private metadata can be
managed by x86 without bleeding too many details into common code.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
