| Age | Commit message (Collapse) | Author |
|---|
|
Remove sudo as some test running environments may not have sudo available.
Instead skip the test if root privileges aren't available in the test.
[usama.anjum@collabora.com: on-fault-limit: run test without root privileges otherwise skip]
Link: https://lkml.kernel.org/r/20240201130538.1404897-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20240125154608.720072-3-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: Improve run_vmtests.sh", v3.
In this series, I'm trying to add 3 missing tests to vm_runtests.sh which
is used to run all the tests in mm suite. These tests weren't running by
CIs. While enabling them and through review feedback, I've fixed some
problems in tests as well. I've found more flakiness in more tests which
I'll be fixing with future patches.
hugetlb-read-hwpoison test is being added where it can only run with newly
added "-d" (destructive) flag only. Not sure why it is failing again. So
once it become stable, we can think of moving it to default set of tests
if it doesn't have any side-effect to them.
This patch (of 5):
Do not unmount the cgroup if it wasn't mounted by the test. The earlier
patch had fixed this for charge_reserved_hugetlb, but not for this test.
I'm adding fixes tag to that earlier patch.
Link: https://lkml.kernel.org/r/20240125154608.720072-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20240125154608.720072-2-usama.anjum@collabora.com
Fixes: 209376ed2a84 ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This adds the promised selftest for eventfd. It will verify the flags of
eventfd2, including EFD_CLOEXEC, EFD_NONBLOCK and EFD_SEMAPHORE.
Link: https://lkml.kernel.org/r/tencent_3C9A298878D22B5D8F79DC2FEE99BB4A8F05@qq.com
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/udp.c
f796feabb9f5 ("udp: add local "peek offset enabled" flag")
56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")
Adjacent changes:
net/unix/garbage.c
aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
11498715f266 ("af_unix: Remove io_uring code for GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a selftest to cover the zswapin code path, allocating more memory than
the cgroup limit to trigger swapout/zswapout, then reading the pages back
in memory several times. This is inspired by a recently encountered
kernel crash on the zswapin path in our internal kernel, which went
undetected because of a lack of test coverage for this path.
Add a selftest to verify that when memory.zswap.max = 0, no pages can go
to the zswap pool for the cgroup.
[nphamcs@gmail.com: remove redundant comment, add success checks]
Link: https://lkml.kernel.org/r/20240222043132.616320-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20240205225608.3083251-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Rik van Riel <riel@surriel.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The zswap no invasive shrink selftest breaks because we rename the zswap
writeback counter (see [1]). Fix the test.
[1]: https://patchwork.kernel.org/project/linux-kselftest/patch/20231205193307.2432803-1-nphamcs@gmail.com/
Link: https://lkml.kernel.org/r/20240205225608.3083251-3-nphamcs@gmail.com
Fixes: a697dc2be925 ("selftests: cgroup: update per-memcg zswap writeback selftest")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure struct_ops rejects the registration of struct_ops types without
proper CFI stub functions.
bpf_test_no_cfi.ko is a module that attempts to register a struct_ops type
called "bpf_test_no_cfi_ops" with cfi_stubs of NULL and non-NULL value.
The NULL one should fail, and the non-NULL one should succeed. The module
can only be loaded successfully if these registrations yield the expected
results.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240222021105.1180475-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- Fix dirty tracking bitmap collection when using reporting bitmaps
that are not neatly aligned to u64's or match the IO page table radix
tree layout.
- Add self tests to cover the cases that were found to be broken.
- Add missing enforcement of invalidation type in the uapi.
- Fix selftest config generation
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
selftests/iommu: fix the config fragment
iommufd: Reject non-zero data_type if no data_len is provided
iommufd/iova_bitmap: Consider page offset for the pages to be pinned
iommufd/selftest: Add mock IO hugepages tests
iommufd/selftest: Hugepage mock domain support
iommufd/selftest: Refactor mock_domain_read_and_clear_dirty()
iommufd/selftest: Refactor dirty bitmap tests
iommufd/iova_bitmap: Handle recording beyond the mapped pages
iommufd/selftest: Test u64 unaligned bitmaps
iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
iommufd/iova_bitmap: Bounds check mapped::pages access
|
|
Every test result report in the compaction test prints a distinct log
messae, and some of the reports print a name that varies at runtime. This
causes problems for automation since a lot of automation software uses the
printed string as the name of the test, if the name varies from run to run
and from pass to fail then the automation software can't identify that a
test changed result or that the same tests are being run.
Refactor the logging to use a consistent name when printing the result of
the test, printing the existing messages as diagnostic information instead
so they are still available for people trying to interpret the results.
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-2-a3c0386496b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: Output cleanups for the compaction test".
A couple of small updates for the check_compaction selftest which make
it play more nicely with test automation systems.
This patch (of 2):
When the compaction test is run it checks to make sure that prerequistives
the test requires are available and skips the tests if not. When this
happens we log the test as a pass rather than a skip, log as a skip so
that the distinction is clear and automation can see unexpected skips.
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-0-a3c0386496b5@kernel.org
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-1-a3c0386496b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON debugfs selftests dependency checker assumes debugfs would be
mounted at /sys/kernel/debug. That would be ok for many cases, but some
systems might mounted the file system on some different places. Parse the
real mount point using /proc/mounts file.
Link: https://lkml.kernel.org/r/20240207203134.69976-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit ebb3f994dd92 ("mm/damon/dbgfs: fix 'struct pid' leaks in
'dbgfs_target_ids_write()'") fixes a pid leak bug in DAMON debugfs
interface, namely dbgfs_target_ids_write() function. Add a selftest for
the issue to prevent the problem from mistakenly recurring.
Link: https://lkml.kernel.org/r/20240207203134.69976-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
dbgfs_before_terminate()
commit 34796417964b ("mm/damon/dbgfs: protect targets destructions with
kdamond_lock") fixed a race of DAMON debugfs interface. Specifically, the
race was happening between target_ids_read() and dbgfs_before_terminate().
Add a test for the issue to prevent the problem from accidentally
recurring.
Link: https://lkml.kernel.org/r/20240207203134.69976-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a selftest for DAMOS apply intervals. It runs two schemes having
different apply interval agains an artificial memory access workload, and
check if the scheme with smaller apply interval was applied more
frequently.
Link: https://lkml.kernel.org/r/20240207203134.69976-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a selftest for verifying the DAMOS quota feature. The test is very
similar to sysfs_update_schemes_tried_regions_wss_estimation.py. It
starts an artificial workload of 20 MiB working set, run DAMON to find the
working set size, but with 1 MiB/100 ms size quota. Then, it collect the
DAMON-found working set size every 100 ms and check if the quota was
always applied as expected. For the confirmation, the tests shows the
stat-applied region size and the qt_exceeds stat.
Link: https://lkml.kernel.org/r/20240207203134.69976-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update the test-purpose DAMON sysfs control Python module to support DAMOS
apply interval.
Link: https://lkml.kernel.org/r/20240207203134.69976-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update the test-purpose DAMON sysfs control Python module to support DAMOS
stats.
Link: https://lkml.kernel.org/r/20240207203134.69976-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: add more tests for core functionalities and
corner cases".
Continue DAMON selftests' test coverage improvement works with a trivial
improvement of the test code itself. The sequence of the patches in
patchset is as follows.
The first five patches add two DAMON core functionalities tests. Those
begins with three patches (patches 1-3) that update the test-purpose DAMON
sysfs interface wrapper to support DAMOS quota, stats, and apply interval
features, respectively. The fourth patch implements and adds a selftest
for DAMOS quota feature, using the DAMON sysfs interface wrapper's newly
added support of the quota and the stats feature. The fifth patch further
implements and adds a selftest for DAMOS apply interval using the DAMON
sysfs interface wrapper's newly added support of the apply interval and
the stats feature.
Two patches (patches 6 and 7) for implementing and adding two corner cases
handling selftests follow. Those try to avoid two previously fixed bugs
from recurring.
Finally, a patch for making DAMON debugfs selftests dependency checker to
use /proc/mounts instead of the hard-coded mount point assumption follows.
This patch (of 8):
Update the test-purpose DAMON sysfs control Python module to support DAMOS
quota.
Link: https://lkml.kernel.org/r/20240207203134.69976-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240207203134.69976-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
hugetlb_madv_vs_map selftest was not part of the mm test-suite since we
didn't have a fix for the problem it found.
Now that the problem is already fixed (see previous commit), let's enable
this selftest in the default test-suite.
Link: https://lkml.kernel.org/r/20240205191843.4009640-3-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The usage of run_vmtests.sh does not include hugetlb, which is a valid
test category.
Add the 'hugetlb' to the usage of run_vmtests.sh.
Link: https://lkml.kernel.org/r/20240129115246.1234253-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Joel Savitz <jsavitz@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-13-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-12-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Also remove unneeded logging which isn't enabled. Skip a hugepage size if
it has less free pages to avoid unnecessary failures. For examples, some
systems may not have 1GB hugepage free. So skip 1GB for testing in this
test instead of failing the entire test.
Link: https://lkml.kernel.org/r/20240202113119.2047740-11-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-9-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-8-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-7-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
I've done some cleanups as well.
Link: https://lkml.kernel.org/r/20240202113119.2047740-6-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-5-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Minor cleanups have also been included.
Link: https://lkml.kernel.org/r/20240202113119.2047740-4-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240202113119.2047740-3-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "conform tests to TAP format output", v2.
This patch (of 12):
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
While at it, convert commenting style from // to /**/.
Link: https://lkml.kernel.org/r/20240202113119.2047740-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20240202113119.2047740-2-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Following change will rename 'monitor_on' DAMON debugfs file to
'monitor_on_DEPRECATED', to make the deprecation unignorable in runtime.
Since it could make DAMON selftests fail and disturb future bisects,
update DAMON selftests to support the change.
Link: https://lkml.kernel.org/r/20240130013549.89538-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This test stresses the race between of madvise(DONTNEED), a page fault
and a parallel huge page mmap, which should fail due to lack of
available page available for mapping.
This test case must run on a system with one and only one huge page
available.
# echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
During setup, the test allocates the only available page, and starts
three threads:
- thread 1:
* madvise(MADV_DONTNEED) on the allocated huge page
- thread 2:
* Write to the allocated huge page
- thread 3:
* Tries to allocated (steal) an extra huge page (which is not
available)
thread 3 should never succeed in the allocation, since the only huge
page was never unmapped, and should be reserved.
Touching the old page after thread3 allocation will raise a SIGBUS.
Link: https://lkml.kernel.org/r/20240105155419.1939484-2-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When running with CATEGORY= (thp | hugetlb) we see a large numbers of
tests failing. These failures are due to not being able to allocate a
hugepage and normally occur on memory contrainted systems or when using
large page sizes.
drop_cache and compact_memory before the tests for a higher chance at a
successful hugepage allocation.
Link: https://lkml.kernel.org/r/20240117180037.15734-1-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 32d118ad50a5 ("selftests/memfd: add tests for F_SEAL_EXEC"):
- added several unused 'nbytes' local variables
Commit 6469b66e3f5a ("selftests: improve vm.memfd_noexec sysctl tests"):
- orphaned 'newpid_thread_fn2()' forward declaration
- orphaned 'join_newpid_thread()' forward declaration
- added unused 'pid' local in sysctl_simple_child()
- orphaned 'fd' local in sysctl_simple_child()
- added unused 'fd' in sysctl_nested_child()
Delete the unused locals and forward declarations.
Link: https://lkml.kernel.org/r/20240118095057.677544-1-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path
is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after
check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in
devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall page through
bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests"
* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
l2tp: pass correct message length to ip6_append_data
net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
selftests: ioam: refactoring to align with the fix
Fix write to cloned skb in ipv6_hop_ioam()
phonet/pep: fix racy skb_queue_empty() use
phonet: take correct lock to peek at the RX queue
net: sparx5: Add spinlock for frame transmission from CPU
net/sched: flower: Add lock protection when remove filter handle
devlink: fix port dump cmd type
net: stmmac: Fix EST offset for dwmac 5.10
tools: ynl: don't leak mcast_groups on init error
tools: ynl: make sure we always pass yarg to mnl_cb_run
net: mctp: put sock on tag allocation failure
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
selftests: tls: add test for peeking past a record of a different type
selftests: tls: add test for merging of same-type control messages
...
|
|
This commit updates tcp_custom_syncookie.c:tcp_parse_option() to use
explicit packet offset (ctx->off) for packet access instead of ever
moving pointer (ctx->ptr), this reduces verification complexity:
- the tcp_parse_option() is passed as a callback to bpf_loop();
- suppose a checkpoint is created each time at function entry;
- the ctx->ptr is tracked by verifier as PTR_TO_PACKET;
- the ctx->ptr is incremented in tcp_parse_option(),
thus umax_value field tracked for it is incremented as well;
- on each next iteration of tcp_parse_option()
checkpoint from a previous iteration can't be reused
for state pruning, because PTR_TO_PACKET registers are
considered equivalent only if old->umax_value >= cur->umax_value;
- on the other hand, the ctx->off is a SCALAR,
subject to widen_imprecise_scalars();
- it's exact bounds are eventually forgotten and it is tracked as
unknown scalar at entry to tcp_parse_option();
- hence checkpoints created at the start of the function eventually
converge.
The change is similar to one applied in [0] to xdp_synproxy_kern.c.
Comparing before and after with veristat yields following results:
File Insns (A) Insns (B) Insns (DIFF)
------------------------------- --------- --------- -----------------
test_tcp_custom_syncookie.bpf.o 466657 12423 -454234 (-97.34%)
[0] commit 977bc146d4eb ("selftests/bpf: track tcp payload offset as scalar in xdp_synproxy")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240222150300.14909-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is a selftest that checks for an (expected) error when an
invalid AR is specified, but not one that exercises the AR path.
Add a simple test that mirrors the vanilla write/read test while
providing an AR. An AR that contains zero will direct the CPU to
use the primary address space normally used anyway. AR[1] is
selected for this test because the host AR[1] is usually non-zero,
and KVM needs to correctly swap those values.
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20240220211211.3102609-3-farman@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
If the relevant capability (KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA) is present
then re-map vcpu_info using the HVA part way through the tests to make sure
then there is no functional change.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-16-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Using the HVA of the shared_info page is more efficient, so if the
capability (KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA) is present use that method
to do the mapping.
NOTE: Have the juggle_shinfo_state() thread map and unmap using both
GFN and HVA, to make sure the older mechanism is not broken.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-15-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.
➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST
While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.
Fixes: 57f0988706fe ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-02-22
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).
The main changes are:
1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
page through bpf_probe_read_kernel and friends, from Hou Tao.
2) Fix a kernel panic due to uninitialized iter position pointer in
bpf_iter_task, from Yafang Shao.
3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
from Martin KaFai Lau.
4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
due to incorrect truesize accounting, from Sebastian Andrzej Siewior.
5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
from Shigeru Yoshida.
6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
resolved, from Hari Bathini.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
selftests/bpf: Add negtive test cases for task iter
bpf: Fix an issue due to uninitialized bpf_iter_task
selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
selftest/bpf: Test the read of vsyscall page under x86-64
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
bpf, scripts: Correct GPL license name
xsk: Add truesize to skb_add_rx_frag().
bpf: Fix warning for bpf_cpumask in verifier
====================
Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ioam6_parser uses a packet socket. After the fix to prevent writing to
cloned skb's, the receiver does not see its IOAM data anymore, which
makes input/forward ioam-selftests to fail. As a workaround,
ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to
get hop-by-hop options. As a consequence, the hook is "after" the IOAM
data insertion by the receiver and all tests are working again.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace some goto statements with return statements so that unmap() is not
called on an undefined address. This change is made so that unmap() can
only be reached after mmap() is called (and the address mentioned is
defined). Returning MAP_FAILED seems acceptable since client code checks
for this value.
Link: https://lkml.kernel.org/r/20240105202401.28851-1-inwardvessel@gmail.com
Fixes: 42096aa24b82 ("selftest/mm: ksm_functional_tests: test in mmap_and_merge_range() if anything got merged")
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If we queue 3 records:
- record 1, type DATA
- record 2, some other type
- record 3, type DATA
the current code can look past the 2nd record and merge the 2 data
records.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/4623550f8617c239581030c13402d3262f2bd14f.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two consecutive control messages of the same type should never be
merged into one large received blob of data.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/018f1633d5471684c65def5fe390de3b15c3d683.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test of linking process creates several intermediate files.
Remove them once the build is over.
This reduces the number of files in selftests/bpf/ directory
from ~4400 to ~2600.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240220231102.49090-1-alexei.starovoitov@gmail.com
|
|
While we have test coverage for the ptrace interface in our selftests
the current programs have a number of gaps. The testing is done per
regset so does not cover interactions and at no point do any of the
tests actually run the traced processes meaning that there is no
validation that anything we read or write corresponds to register values
the process actually sees. Let's add a new program which attempts to cover
these gaps.
Each test we do performs a single ptrace write. For each test we generate
some random initial register data in memory and then fork() and trace a
child. The child will load the generated data into the registers then
trigger a breakpoint. The parent waits for the breakpoint then reads the
entire child register state via ptrace, verifying that the values expected
were actually loaded by the child. It then does the write being tested
and resumes the child. Once resumed the child saves the register state
it sees to memory and executes another breakpoint. The parent uses
process_vm_readv() to get these values from the child and verifies that
the values were as expected before cleaning up the child.
We generate configurations with combinations of vector lengths and SVCR
values and then try every ptrace write which will implement the
transition we generated. In order to control execution time (especially
in emulation) we only cover the minimum and maximum VL for each of SVE
and SME, this will ensure we generate both increasing and decreasing
changes in vector length. In order to provide a baseline test we also
check the case where we resume the child without doing a ptrace write.
In order to simplify the generation of the test count for kselftest we
will report but skip a substantial number of tests that can't actually
be expressed via a single ptrace write, several times more than we
actually run. This is noisy and will add some overhead but is very much
simpler so is probably worth the tradeoff.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240122-arm64-test-ptrace-regs-v1-1-0897f822d73e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Although the fixed counter 3 and its exclusive pseudo slots event are
not supported by KVM yet, the architectural slots event is supported by
KVM and can be programmed on any GP counter. Thus add validation for this
architectural slots event.
Top-down slots event "counts the total number of available slots for an
unhalted logical processor, and increments by machine-width of the
narrowest pipeline as employed by the Top-down Microarchitecture
Analysis method."
As for the slot, it's an abstract concept which indicates how many
uops (decoded from instructions) can be processed simultaneously
(per cycle) on HW. In Top-down Microarchitecture Analysis (TMA) method,
the processor is divided into two parts, frond-end and back-end. Assume
there is a processor with classic 5-stage pipeline, fetch, decode,
execute, memory access and register writeback. The former 2 stages
(fetch/decode) are classified to frond-end and the latter 3 stages are
classified to back-end.
In modern Intel processors, a complicated instruction would be decoded
into several uops (micro-operations) and so these uops can be processed
simultaneously and then improve the performance. Thus, assume a
processor can decode and dispatch 4 uops in front-end and execute 4 uops
in back-end simultaneously (per-cycle), so the machine-width of this
processor is 4 and this processor has 4 topdown slots per-cycle.
If a slot is spare and can be used to process a new upcoming uop, then
the slot is available, but if a uop occupies a slot for several cycles
and can't be retired (maybe blocked by memory access), then this slot is
stall and unavailable.
Considering the testing instruction sequence can't be macro-fused on x86
platforms, the measured slots count should not be less than
NUM_INSNS_RETIRED. Thus assert the slots count against NUM_INSNS_RETIRED.
pmu_counters_test passed with this patch on Intel Sapphire Rapids.
About the more information about TMA method, please refer the below link.
https://www.intel.com/content/www/us/en/docs/vtune-profiler/cookbook/2023-0/top-down-microarchitecture-analysis-method.html
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240218043003.2424683-1-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
On a 8-socket server the TSC is wrongly marked as 'unstable' and disabled
during boot time on about one out of 120 boot attempts:
clocksource: timekeeping watchdog on CPU227: wd-tsc-wd excessive read-back delay of 153560ns vs. limit of 125000ns,
wd-wd read-back delay only 11440ns, attempt 3, marking tsc unstable
tsc: Marking TSC unstable due to clocksource watchdog
TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
sched_clock: Marking unstable (119294969739, 159204297)<-(125446229205, -5992055152)
clocksource: Checking clocksource tsc synchronization from CPU 319 to CPUs 0,99,136,180,210,542,601,896.
clocksource: Switched to clocksource hpet
The reason is that for platform with a large number of CPUs, there are
sporadic big or huge read latencies while reading the watchog/clocksource
during boot or when system is under stress work load, and the frequency and
maximum value of the latency goes up with the number of online CPUs.
The cCurrent code already has logic to detect and filter such high latency
case by reading the watchdog twice and checking the two deltas. Due to the
randomness of the latency, there is a low probabilty that the first delta
(latency) is big, but the second delta is small and looks valid. The
watchdog code retries the readouts by default twice, which is not
necessarily sufficient for systems with a large number of CPUs.
There is a command line parameter 'max_cswd_read_retries' which allows to
increase the number of retries, but that's not user friendly as it needs to
be tweaked per system. As the number of required retries is proportional to
the number of online CPUs, this parameter can be calculated at runtime.
Scale and enlarge the number of retries according to the number of online
CPUs and remove the command line parameter completely.
[ tglx: Massaged change log and comments ]
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jin Wang <jin1.wang@intel.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240221060859.1027450-1-feng.tang@intel.com
|
