summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2023-10-24KVM: selftests: aarch64: Introduce vpmu_counter_access testReiji Watanabe
Introduce vpmu_counter_access test for arm64 platforms. The test configures PMUv3 for a vCPU, sets PMCR_EL0.N for the vCPU, and check if the guest can consistently see the same number of the PMU event counters (PMCR_EL0.N) that userspace sets. This test case is done with each of the PMCR_EL0.N values from 0 to 31 (With the PMCR_EL0.N values greater than the host value, the test expects KVM_SET_ONE_REG for the PMCR_EL0 to fail). Signed-off-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231020214053.2144305-10-rananta@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-10-24selftests: net: change ifconfig with ip commandSwarup Laxman Kotiaklapudi
Change ifconfig with ip command, on a system where ifconfig is not used this script will not work correcly. Test result with this patchset: sudo make TARGETS="net" kselftest .... TAP version 13 1..1 timeout set to 1500 selftests: net: route_localnet.sh run arp_announce test net.ipv4.conf.veth0.route_localnet = 1 net.ipv4.conf.veth1.route_localnet = 1 net.ipv4.conf.veth0.arp_announce = 2 net.ipv4.conf.veth1.arp_announce = 2 PING 127.25.3.14 (127.25.3.14) from 127.25.3.4 veth0: 56(84) bytes of data. 64 bytes from 127.25.3.14: icmp_seq=1 ttl=64 time=0.038 ms 64 bytes from 127.25.3.14: icmp_seq=2 ttl=64 time=0.068 ms 64 bytes from 127.25.3.14: icmp_seq=3 ttl=64 time=0.068 ms 64 bytes from 127.25.3.14: icmp_seq=4 ttl=64 time=0.068 ms 64 bytes from 127.25.3.14: icmp_seq=5 ttl=64 time=0.068 ms --- 127.25.3.14 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4073ms rtt min/avg/max/mdev = 0.038/0.062/0.068/0.012 ms ok run arp_ignore test net.ipv4.conf.veth0.route_localnet = 1 net.ipv4.conf.veth1.route_localnet = 1 net.ipv4.conf.veth0.arp_ignore = 3 net.ipv4.conf.veth1.arp_ignore = 3 PING 127.25.3.14 (127.25.3.14) from 127.25.3.4 veth0: 56(84) bytes of data. 64 bytes from 127.25.3.14: icmp_seq=1 ttl=64 time=0.032 ms 64 bytes from 127.25.3.14: icmp_seq=2 ttl=64 time=0.065 ms 64 bytes from 127.25.3.14: icmp_seq=3 ttl=64 time=0.066 ms 64 bytes from 127.25.3.14: icmp_seq=4 ttl=64 time=0.065 ms 64 bytes from 127.25.3.14: icmp_seq=5 ttl=64 time=0.065 ms --- 127.25.3.14 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4092ms rtt min/avg/max/mdev = 0.032/0.058/0.066/0.013 ms ok ok 1 selftests: net: route_localnet.sh ... Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20231023123422.2895-1-swarupkotikalapudi@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-24Merge tag 'mm-hotfixes-stable-2023-10-24-09-40' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "20 hotfixes. 12 are cc:stable and the remainder address post-6.5 issues or aren't considered necessary for earlier kernel versions" * tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: maple_tree: add GFP_KERNEL to allocations in mas_expected_entries() selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier mailmap: correct email aliasing for Oleksij Rempel mailmap: map Bartosz's old address to the current one mm/damon/sysfs: check DAMOS regions update progress from before_terminate() MAINTAINERS: Ondrej has moved kasan: disable kasan_non_canonical_hook() for HW tags kasan: print the original fault addr when access invalid shadow hugetlbfs: close race between MADV_DONTNEED and page fault hugetlbfs: extend hugetlb_vma_lock to private VMAs hugetlbfs: clear resv_map pointer if mmap fails mm: zswap: fix pool refcount bug around shrink_worker() mm/migrate: fix do_pages_move for compat pointers riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking mmap: fix error paths with dup_anon_vma() mmap: fix vma_iterator in error path of vma_merge() mm: fix vm_brk_flags() to not bail out while holding lock mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer mm/page_alloc: correct start page when guard page debug is enabled
2023-10-24iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP_NO_CLEAR flagJoao Martins
Change test_mock_dirty_bitmaps() to pass a flag where it specifies the flag under test. The test does the same thing as the GET_DIRTY_BITMAP regular test. Except that it tests whether the dirtied bits are fetched all the same a second time, as opposed to observing them cleared. Link: https://lore.kernel.org/r/20231024135109.73787-19-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-10-24iommufd/selftest: Test out_capabilities in IOMMU_GET_HW_INFOJoao Martins
Enumerate the capabilities from the mock device and test whether it advertises as expected. Include it as part of the iommufd_dirty_tracking fixture. Link: https://lore.kernel.org/r/20231024135109.73787-18-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-10-24iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAPJoao Martins
Add a new test ioctl for simulating the dirty IOVAs in the mock domain, and implement the mock iommu domain ops that get the dirty tracking supported. The selftest exercises the usual main workflow of: 1) Setting dirty tracking from the iommu domain 2) Read and clear dirty IOPTEs Different fixtures will test different IOVA range sizes, that exercise corner cases of the bitmaps. Link: https://lore.kernel.org/r/20231024135109.73787-17-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-10-24iommufd/selftest: Test IOMMU_HWPT_SET_DIRTY_TRACKINGJoao Martins
Change mock_domain to supporting dirty tracking and add tests to exercise the new SET_DIRTY_TRACKING API in the iommufd_dirty_tracking selftest fixture. Link: https://lore.kernel.org/r/20231024135109.73787-16-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-10-24iommufd/selftest: Test IOMMU_HWPT_ALLOC_DIRTY_TRACKINGJoao Martins
In order to selftest the iommu domain dirty enforcing implement the mock_domain necessary support and add a new dev_flags to test that the hwpt_alloc/attach_device fails as expected. Expand the existing mock_domain fixture with a enforce_dirty test that exercises the hwpt_alloc and device attachment. Link: https://lore.kernel.org/r/20231024135109.73787-15-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-10-24iommufd/selftest: Expand mock_domain with dev_flagsJoao Martins
Expand mock_domain test to be able to manipulate the device capabilities. This allows testing with mockdev without dirty tracking support advertised and thus make sure enforce_dirty test does the expected. To avoid breaking IOMMUFD_TEST UABI replicate the mock_domain struct and thus add an input dev_flags at the end. Link: https://lore.kernel.org/r/20231024135109.73787-14-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-10-23selftests/bpf: test if state loops are detected in a tricky caseEduard Zingerman
A convoluted test case for iterators convergence logic that demonstrates that states with branch count equal to 0 might still be a part of not completely explored loop. E.g. consider the following state diagram: initial Here state 'succ' was processed first, | it was eventually tracked to produce a V state identical to 'hdr'. .---------> hdr All branches from 'succ' had been explored | | and thus 'succ' has its .branches == 0. | V | .------... Suppose states 'cur' and 'succ' correspond | | | to the same instruction + callsites. | V V In such case it is necessary to check | ... ... whether 'succ' and 'cur' are identical. | | | If 'succ' and 'cur' are a part of the same loop | V V they have to be compared exactly. | succ <- cur | | | V | ... | | '----' Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231024000917.12153-7-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-23selftests/bpf: tests with delayed read/precision makrs in loop bodyEduard Zingerman
These test cases try to hide read and precision marks from loop convergence logic: marks would only be assigned on subsequent loop iterations or after exploring states pushed to env->head stack first. Without verifier fix to use exact states comparison logic for iterators convergence these tests (except 'triple_continue') would be errorneously marked as safe. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231024000917.12153-5-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-23bpf: exact states comparison for iterator convergence checksEduard Zingerman
Convergence for open coded iterators is computed in is_state_visited() by examining states with branches count > 1 and using states_equal(). states_equal() computes sub-state relation using read and precision marks. Read and precision marks are propagated from children states, thus are not guaranteed to be complete inside a loop when branches count > 1. This could be demonstrated using the following unsafe program: 1. r7 = -16 2. r6 = bpf_get_prandom_u32() 3. while (bpf_iter_num_next(&fp[-8])) { 4. if (r6 != 42) { 5. r7 = -32 6. r6 = bpf_get_prandom_u32() 7. continue 8. } 9. r0 = r10 10. r0 += r7 11. r8 = *(u64 *)(r0 + 0) 12. r6 = bpf_get_prandom_u32() 13. } Here verifier would first visit path 1-3, create a checkpoint at 3 with r7=-16, continue to 4-7,3 with r7=-32. Because instructions at 9-12 had not been visitied yet existing checkpoint at 3 does not have read or precision mark for r7. Thus states_equal() would return true and verifier would discard current state, thus unsafe memory access at 11 would not be caught. This commit fixes this loophole by introducing exact state comparisons for iterator convergence logic: - registers are compared using regs_exact() regardless of read or precision marks; - stack slots have to have identical type. Unfortunately, this is too strict even for simple programs like below: i = 0; while(iter_next(&it)) i++; At each iteration step i++ would produce a new distinct state and eventually instruction processing limit would be reached. To avoid such behavior speculatively forget (widen) range for imprecise scalar registers, if those registers were not precise at the end of the previous iteration and do not match exactly. This a conservative heuristic that allows to verify wide range of programs, however it precludes verification of programs that conjure an imprecise value on the first loop iteration and use it as precise on the second. Test case iter_task_vma_for_each() presents one of such cases: unsigned int seen = 0; ... bpf_for_each(task_vma, vma, task, 0) { if (seen >= 1000) break; ... seen++; } Here clang generates the following code: <LBB0_4>: 24: r8 = r6 ; stash current value of ... body ... 'seen' 29: r1 = r10 30: r1 += -0x8 31: call bpf_iter_task_vma_next 32: r6 += 0x1 ; seen++; 33: if r0 == 0x0 goto +0x2 <LBB0_6> ; exit on next() == NULL 34: r7 += 0x10 35: if r8 < 0x3e7 goto -0xc <LBB0_4> ; loop on seen < 1000 <LBB0_6>: ... exit ... Note that counter in r6 is copied to r8 and then incremented, conditional jump is done using r8. Because of this precision mark for r6 lags one state behind of precision mark on r8 and widening logic kicks in. Adding barrier_var(seen) after conditional is sufficient to force clang use the same register for both counting and conditional jump. This issue was discussed in the thread [1] which was started by Andrew Werner <awerner32@gmail.com> demonstrating a similar bug in callback functions handling. The callbacks would be addressed in a followup patch. [1] https://lore.kernel.org/bpf/97a90da09404c65c8e810cf83c94ac703705dc0e.camel@gmail.com/ Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231024000917.12153-4-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-23tcp: introduce tcp_clock_ms()Eric Dumazet
It delivers current TCP time stamp in ms unit, and is used in place of confusing tcp_time_stamp_raw() It is the same family than tcp_clock_ns() and tcp_clock_ms(). tcp_time_stamp_raw() will be replaced later for TSval contexts with a more descriptive name. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-21Merge tag 'probes-fixes-v6.6-rc6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - kprobe-events: Fix kprobe events to reject if the attached symbol is not unique name because it may not the function which the user want to attach to. (User can attach a probe to such symbol using the nearest unique symbol + offset.) - selftest: Add a testcase to ensure the kprobe event rejects non unique symbol correctly. * tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: selftests/ftrace: Add new test case which checks non unique symbol tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols
2023-10-21selftests: tc-testing: add test for 'rt' upgrade on hfscPedro Tammela
Add a test to check if inner rt curves are upgraded to sc curves. Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-20Merge tag 'linux_kselftest_active-fixes-6.6-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "One single fix to assert check in user_events abi_test to properly check bit value on Big Endian architectures. The code treated the bit values as Little Endian and the check failed on Big Endian" * tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/user_events: Fix abi_test for BE archs
2023-10-20selftests/bpf: Add more test cases for bpf memory allocatorHou Tao
Add the following 3 test cases for bpf memory allocator: 1) Do allocation in bpf program and free through map free 2) Do batch per-cpu allocation and per-cpu free in bpf program 3) Do per-cpu allocation in bpf program and free through map free For per-cpu allocation, because per-cpu allocation can not refill timely sometimes, so test 2) and test 3) consider it is OK for bpf_percpu_obj_new_impl() to return NULL. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20231020133202.4043247-8-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-20selftests/bpf: Make linked_list failure test more robustKumar Kartikeya Dwivedi
The linked list failure test 'pop_front_off' and 'pop_back_off' currently rely on matching exact instruction and register values. The purpose of the test is to ensure the offset is correctly incremented for the returned pointers from list pop helpers, which can then be used with container_of to obtain the real object. Hence, somehow obtaining the information that the offset is 48 will work for us. Make the test more robust by relying on verifier error string of bpf_spin_lock and remove dependence on fragile instruction index or register number, which can be affected by different clang versions used to build the selftests. Fixes: 300f19dcdb99 ("selftests/bpf: Add BPF linked list API tests") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231020144839.2734006-1-memxor@gmail.com
2023-10-20selftests/ftrace: Add new test case which checks non unique symbolFrancis Laniel
If name_show() is non unique, this test will try to install a kprobe on this function which should fail returning EADDRNOTAVAIL. On kernel where name_show() is not unique, this test is skipped. Link: https://lore.kernel.org/all/20231020104250.9537-3-flaniel@linux.microsoft.com/ Cc: stable@vger.kernel.org Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-10-20KVM: riscv: selftests: Add SBI DBCN extension to get-reg-list testAnup Patel
We have a new SBI debug console (DBCN) extension supported by in-kernel KVM so let us add this extension to get-reg-list test. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2023-10-19selftests/bpf: Add tests for open-coded task and css iterChuyi Zhou
This patch adds 4 subtests to demonstrate these patterns and validating correctness. subtest1: 1) We use task_iter to iterate all process in the system and search for the current process with a given pid. 2) We create some threads in current process context, and use BPF_TASK_ITER_PROC_THREADS to iterate all threads of current process. As expected, we would find all the threads of current process. 3) We create some threads and use BPF_TASK_ITER_ALL_THREADS to iterate all threads in the system. As expected, we would find all the threads which was created. subtest2: We create a cgroup and add the current task to the cgroup. In the BPF program, we would use bpf_for_each(css_task, task, css) to iterate all tasks under the cgroup. As expected, we would find the current process. subtest3: 1) We create a cgroup tree. In the BPF program, we use bpf_for_each(css, pos, root, XXX) to iterate all descendant under the root with pre and post order. As expected, we would find all descendant and the last iterating cgroup in post-order is root cgroup, the first iterating cgroup in pre-order is root cgroup. 2) We wse BPF_CGROUP_ITER_ANCESTORS_UP to traverse the cgroup tree starting from leaf and root separately, and record the height. The diff of the hights would be the total tree-high - 1. subtest4: Add some failure testcase when using css_task, task and css iters, e.g, unlock when using task-iters to iterate tasks. Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Link: https://lore.kernel.org/r/20231018061746.111364-9-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19selftests/bpf: rename bpf_iter_task.c to bpf_iter_tasks.cChuyi Zhou
The newly-added struct bpf_iter_task has a name collision with a selftest for the seq_file task iter's bpf skel, so the selftests/bpf/progs file is renamed in order to avoid the collision. Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231018061746.111364-8-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19bpf: Introduce css open-coded iterator kfuncsChuyi Zhou
This Patch adds kfuncs bpf_iter_css_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_css in open-coded iterator style. These kfuncs actually wrapps css_next_descendant_{pre, post}. css_iter can be used to: 1) iterating a sepcific cgroup tree with pre/post/up order 2) iterating cgroup_subsystem in BPF Prog, like for_each_mem_cgroup_tree/cpuset_for_each_descendant_pre in kernel. The API design is consistent with cgroup_iter. bpf_iter_css_new accepts parameters defining iteration order and starting css. Here we also reuse BPF_CGROUP_ITER_DESCENDANTS_PRE, BPF_CGROUP_ITER_DESCENDANTS_POST, BPF_CGROUP_ITER_ANCESTORS_UP enums. Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20231018061746.111364-5-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19bpf: Introduce task open coded iterator kfuncsChuyi Zhou
This patch adds kfuncs bpf_iter_task_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_task in open-coded iterator style. BPF programs can use these kfuncs or through bpf_for_each macro to iterate all processes in the system. The API design keep consistent with SEC("iter/task"). bpf_iter_task_new() accepts a specific task and iterating type which allows: 1. iterating all process in the system (BPF_TASK_ITER_ALL_PROCS) 2. iterating all threads in the system (BPF_TASK_ITER_ALL_THREADS) 3. iterating all threads of a specific task (BPF_TASK_ITER_PROC_THREADS) Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Link: https://lore.kernel.org/r/20231018061746.111364-4-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19bpf: Introduce css_task open-coded iterator kfuncsChuyi Zhou
This patch adds kfuncs bpf_iter_css_task_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_css_task in open-coded iterator style. These kfuncs actually wrapps css_task_iter_{start,next, end}. BPF programs can use these kfuncs through bpf_for_each macro for iteration of all tasks under a css. css_task_iter_*() would try to get the global spin-lock *css_set_lock*, so the bpf side has to be careful in where it allows to use this iter. Currently we only allow it in bpf_lsm and bpf iter-s. Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20231018061746.111364-3-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19selftests/bpf/sockopt: Add io_uring supportBreno Leitao
Expand the sockopt test to use also check for io_uring {g,s}etsockopt commands operations. This patch starts by marking each test if they support io_uring support or not. Right now, io_uring cmd getsockopt() has a limitation of only accepting level == SOL_SOCKET, otherwise it returns -EOPNOTSUPP. Since there aren't any test exercising getsockopt(level == SOL_SOCKET), this patch changes two tests to use level == SOL_SOCKET, they are "getsockopt: support smaller ctx->optlen" and "getsockopt: read ctx->optlen". There is no limitation for the setsockopt() part. Later, each test runs using regular {g,s}etsockopt systemcalls, and, if liburing is supported, execute the same test (again), but calling liburing {g,s}setsockopt commands. This patch also changes the level of two tests to use SOL_SOCKET for the following two tests. This is going to help to exercise the io_uring subsystem: * getsockopt: read ctx->optlen * getsockopt: support smaller ctx->optlen Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20231016134750.1381153-12-leitao@debian.org Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-19selftests/net: Extract uring helpers to be reusableBreno Leitao
Instead of defining basic io_uring functions in the test case, move them to a common directory, so, other tests can use them. This simplify the test code and reuse the common liburing infrastructure. This is basically a copy of what we have in io_uring_zerocopy_tx with some minor improvements to make checkpatch happy. A follow-up test will use the same helpers in a BPF sockopt test. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20231016134750.1381153-8-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. net/mac80211/key.c 02e0e426a2fb ("wifi: mac80211: fix error path key leak") 2a8b665e6bcc ("wifi: mac80211: remove key_mtx") 7d6904bf26b9 ("Merge wireless into wireless-next") https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/ti/Kconfig a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object") 98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19Merge tag 'net-6.6-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, netfilter, WiFi. Feels like an up-tick in regression fixes, mostly for older releases. The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as fairly clear-cut user reported regressions. The mlx5 DMA bug was causing strife for 390x folks. The fixes themselves are not particularly scary, tho. No open investigations / outstanding reports at the time of writing. Current release - regressions: - eth: mlx5: perform DMA operations in the right locations, make devices usable on s390x, again - sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve, previous fix of rejecting invalid config broke some scripts - rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock - revert "ethtool: Fix mod state of verbose no_mask bitset", needs more work Current release - new code bugs: - tcp: fix listen() warning with v4-mapped-v6 address Previous releases - regressions: - tcp: allow tcp_disconnect() again when threads are waiting, it was denied to plug a constant source of bugs but turns out .NET depends on it - eth: mlx5: fix double-free if buffer refill fails under OOM - revert "net: wwan: iosm: enable runtime pm support for 7560", it's causing regressions and the WWAN team at Intel disappeared - tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb, fix single-stream perf regression on some devices Previous releases - always broken: - Bluetooth: - fix issues in legacy BR/EDR PIN code pairing - correctly bounds check and pad HCI_MON_NEW_INDEX name - netfilter: - more fixes / follow ups for the large "commit protocol" rework, which went in as a fix to 6.5 - fix null-derefs on netlink attrs which user may not pass in - tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless Debian for keeping HZ=250 alive) - net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent letting frankenstein UDP super-frames from getting into the stack - net: fix interface altnames when ifc moves to a new namespace - eth: qed: fix the size of the RX buffers - mptcp: avoid sending RST when closing the initial subflow" * tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits) Revert "ethtool: Fix mod state of verbose no_mask bitset" selftests: mptcp: join: no RST when rm subflow/addr mptcp: avoid sending RST when closing the initial subflow mptcp: more conservative check for zero probes tcp: check mptcp-level constraints for backlog coalescing selftests: mptcp: join: correctly check for no RST net: ti: icssg-prueth: Fix r30 CMDs bitmasks selftests: net: add very basic test for netdev names and namespaces net: move altnames together with the netdevice net: avoid UAF on deleted altname net: check for altname conflicts when changing netdev's netns net: fix ifname in netlink ntf during netns move net: ethernet: ti: Fix mixed module-builtin object net: phy: bcm7xxx: Add missing 16nm EPHY statistics ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr tcp_bpf: properly release resources on error paths net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve net: mdio-mux: fix C45 access returning -EIO after API change tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb octeon_ep: update BQL sent bytes before ringing doorbell ...
2023-10-19selftests: mptcp: join: no RST when rm subflow/addrMatthieu Baerts
Recently, we noticed that some RST were wrongly generated when removing the initial subflow. This patch makes sure RST are not sent when removing any subflows or any addresses. Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19selftests: mptcp: join: correctly check for no RSTMatthieu Baerts
The commit mentioned below was more tolerant with the number of RST seen during a test because in some uncontrollable situations, multiple RST can be generated. But it was not taking into account the case where no RST are expected: this validation was then no longer reporting issues for the 0 RST case because it is not possible to have less than 0 RST in the counter. This patch fixes the issue by adding a specific condition. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19selftests: net: add very basic test for netdev names and namespacesJakub Kicinski
Add selftest for fixes around naming netdevs and namespaces. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-19inet: lock the socket in ip_sock_set_tos()Eric Dumazet
Christoph Paasch reported a panic in TCP stack [1] Indeed, we should not call sk_dst_reset() without holding the socket lock, as __sk_dst_get() callers do not all rely on bare RCU. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 12bad6067 P4D 12bad6067 PUD 12bad5067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 2750 Comm: syz-executor.5 Not tainted 6.6.0-rc4-g7a5720a344e7 #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:tcp_get_metrics+0x118/0x8f0 net/ipv4/tcp_metrics.c:321 Code: c7 44 24 70 02 00 8b 03 89 44 24 48 c7 44 24 4c 00 00 00 00 66 c7 44 24 58 02 00 66 ba 02 00 b1 01 89 4c 24 04 4c 89 7c 24 10 <49> 8b 0f 48 8b 89 50 05 00 00 48 89 4c 24 30 33 81 00 02 00 00 69 RSP: 0018:ffffc90000af79b8 EFLAGS: 00010293 RAX: 000000000100007f RBX: ffff88812ae8f500 RCX: ffff88812b5f8f01 RDX: 0000000000000002 RSI: ffffffff8300f080 RDI: 0000000000000002 RBP: 0000000000000002 R08: 0000000000000003 R09: ffffffff8205eca0 R10: 0000000000000002 R11: ffff88812b5f8f00 R12: ffff88812a9e0580 R13: 0000000000000000 R14: ffff88812ae8fbd2 R15: 0000000000000000 FS: 00007f70a006b640(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000012bad7003 CR4: 0000000000170ee0 Call Trace: <TASK> tcp_fastopen_cache_get+0x32/0x140 net/ipv4/tcp_metrics.c:567 tcp_fastopen_cookie_check+0x28/0x180 net/ipv4/tcp_fastopen.c:419 tcp_connect+0x9c8/0x12a0 net/ipv4/tcp_output.c:3839 tcp_v4_connect+0x645/0x6e0 net/ipv4/tcp_ipv4.c:323 __inet_stream_connect+0x120/0x590 net/ipv4/af_inet.c:676 tcp_sendmsg_fastopen+0x2d6/0x3a0 net/ipv4/tcp.c:1021 tcp_sendmsg_locked+0x1957/0x1b00 net/ipv4/tcp.c:1073 tcp_sendmsg+0x30/0x50 net/ipv4/tcp.c:1336 __sock_sendmsg+0x83/0xd0 net/socket.c:730 __sys_sendto+0x20a/0x2a0 net/socket.c:2194 __do_sys_sendto net/socket.c:2206 [inline] Fixes: e08d0b3d1723 ("inet: implement lockless IP_TOS") Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231018090014.345158-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-18selftests: tc-testing: move auxiliary scripts to a dedicated folderPedro Tammela
Some taprio tests need auxiliary scripts to wait for workqueue events to process. Move them to a dedicated folder in order to package them for the kselftests tarball. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20231017152309.3196320-3-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-18selftests: tc-testing: add missing Kconfig options to 'config'Pedro Tammela
Make sure CI builds using just tc-testing/config can run all tdc tests. Some tests were broken because of missing knobs. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20231017152309.3196320-2-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-18KVM: arm64: selftests: Test for setting ID register from usersapceJing Zhang
Add tests to verify setting ID registers from userspace is handled correctly by KVM. Also add a test case to use ioctl KVM_ARM_GET_REG_WRITABLE_MASKS to get writable masks. Signed-off-by: Jing Zhang <jingzhangos@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231011195740.3349631-6-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-10-18tools headers arm64: Update sysreg.h with kernel sourcesJing Zhang
The users of sysreg.h (perf, KVM selftests) are now generating the necessary sysreg-defs.h; sync sysreg.h with the kernel sources and fix the KVM selftests that use macros which suffered a rename. Signed-off-by: Jing Zhang <jingzhangos@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231011195740.3349631-5-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-10-18KVM: selftests: Generate sysreg-defs.h and add to include pathOliver Upton
Start generating sysreg-defs.h for arm64 builds in anticipation of updating sysreg.h to a version that depends on it. Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231011195740.3349631-4-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-10-18proc: test /proc/${pid}/statmSwarup Laxman Kotiaklapudi
My original comment lied, output can be "0 A A B 0 0 0\n" (see comment in the code). I don't quite understand why get_mm_counter(mm, MM_FILEPAGES) + get_mm_counter(mm, MM_SHMEMPAGES) can stay positive but get_mm_counter(mm, MM_ANONPAGES) is always 0 after everything is unmapped but that's just me. [adobriyan@gmail.com: more or less rewritten] Link: https://lkml.kernel.org/r/0721ca69-7bb4-40aa-8d01-0c5f91e5f363@p183 Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18selftests: add a selftest to verify hugetlb usage in memcgNhat Pham
This patch add a new kselftest to demonstrate and verify the new hugetlb memcg accounting behavior. Link: https://lkml.kernel.org/r/20231006184629.155543-5-nphamcs@gmail.com Signed-off-by: Nhat Pham <nphamcs@gmail.com> Cc: Frank van der Linden <fvdl@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tejun heo <tj@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18selftests/mm: add a new test for madv and hugetlbBreno Leitao
Create a selftest that exercises the race between page faults and madvise(MADV_DONTNEED) in the same huge page. Do it by running two threads that touches the huge page and madvise(MADV_DONTNEED) at the same time. In case of a SIGBUS coming at pagefault, the test should fail, since we hit the bug. The test doesn't have a signal handler, and if it fails, it fails like the following ---------------------------------- running ./hugetlb_fault_after_madv ---------------------------------- ./run_vmtests.sh: line 186: 595563 Bus error (core dumped) "$@" [FAIL] This selftest goes together with the fix of the bug[1] itself. [1] https://lore.kernel.org/all/20231001005659.2185316-1-riel@surriel.com/#r Link: https://lkml.kernel.org/r/20231005163922.87568-3-leitao@debian.org Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Rik van Riel <riel@surriel.com> Tested-by: Rik van Riel <riel@surriel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18selftests/mm: export get_free_hugepages()Breno Leitao
Patch series "New selftest for mm", v2. This is a simple test case that reproduces an mm problem[1], where a page fault races with madvise(), and it is not trivial to reproduce and debug. This test-case aims to avoid such race problems from happening again, impacting workloads that leverages external allocators, such as tcmalloc, jemalloc, etc. [1] https://lore.kernel.org/all/20231001005659.2185316-1-riel@surriel.com/#r This patch (of 2): get_free_hugepages() is helpful for other hugepage tests. Export it to the common file (vm_util.c) to be reused. Link: https://lkml.kernel.org/r/20231005163922.87568-1-leitao@debian.org Link: https://lkml.kernel.org/r/20231005163922.87568-2-leitao@debian.org Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Rik van Riel <riel@surriel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18radix tree test suite: fix allocation calculation in kmem_cache_alloc_bulk()Liam R. Howlett
The bulk allocation is iterating through an array and storing enough memory for the entire bulk allocation instead of a single array entry. Only allocate an array element of the size set in the kmem_cache. Link: https://lkml.kernel.org/r/20230929201359.2857583-1-Liam.Howlett@oracle.com Fixes: cc86e0c2f306 ("radix tree test suite: add support for slab bulk APIs") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18selftests: mm: add pagemap ioctl testsMuhammad Usama Anjum
Add pagemap ioctl tests. Add several different types of tests to judge the correction of the interface. Link: https://lkml.kernel.org/r/20230821141518.870589-7-usama.anjum@collabora.com Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrei Vagin <avagin@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Miroslaw <emmir@google.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Paul Gofman <pgofman@codeweavers.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yun Zhou <yun.zhou@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18Merge mm-hotfixes-stable into mm-stable to pick up depended-upon changes.Andrew Morton
2023-10-18selftests/resctrl: Fix MBM test failure when MBA unavailableIlpo Järvinen
Commit 20d96b25cc4c ("selftests/resctrl: Fix schemata write error check") exposed a problem in feature detection logic in MBM selftest. If schemata does not support MB:x=x entries, the schemata write to initialize 100% memory bandwidth allocation in mbm_setup() will now fail with -EINVAL due to the error handling corrected by the commit 20d96b25cc4c ("selftests/resctrl: Fix schemata write error check"). That commit just uncovers the failed write, it is not wrong itself. If MB:x=x is not supported by schemata, it is safe to assume 100% memory bandwidth is always set. Therefore, the previously ignored error does not make the MBM test itself wrong. Restore the previous behavior of MBM test by checking MB support before attempting to write it into schemata which results in behavior equivalent to ignoring the write error. Fixes: 20d96b25cc4c ("selftests/resctrl: Fix schemata write error check") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-10-18selftests/clone3: Report descriptive test namesMark Brown
The clone3() selftests currently report test results in a format that does not mesh entirely well with automation. They log output for each test such as: # [1382411] Trying clone3() with flags 0 (size 0) # I am the parent (1382411). My child's pid is 1382412 # I am the child, my PID is 1382412 # [1382411] clone3() with flags says: 0 expected 0 ok 1 [1382411] Result (0) matches expectation (0) This is not ideal for automated parsers since the text after the "ok 1" is treated as the test name when comparing runs by a lot of automation (tests routinely get renumbered due to things like new tests being added based on logical groupings). The PID means that the test names will frequently vary and the rest of the name being a description of results means several tests have identical text there. Address this by refactoring things so that we have a static descriptive name for each test which we use when logging passes, failures and skips and since we now have a stable name for the test to hand log that before starting the test to address the common issue reading logs where the test name is only printed after any diagnostics. The result is: # Running test 'simple clone3()' # [1562777] Trying clone3() with flags 0 (size 0) # I am the parent (1562777). My child's pid is 1562778 # I am the child, my PID is 1562778 # [1562777] clone3() with flags says: 0 expected 0 ok 1 simple clone3() In order to handle skips a bit more neatly this is done in a moderately invasive fashion where we move from a sequence of function calls to having an array of test parameters. This hopefully also makes it a little easier to see what the tests are doing when looking at both the source and the logs. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-10-18selftests:modify the incorrect print formatzhujun2
when the argument type is 'unsigned int',printf '%u' in format string. Problem found during code reading. Update commit log with information on how the problem was found: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-10-18selftests/efivarfs: create-read: fix a resource leakzhujun2
The opened file should be closed in main(), otherwise resource leak will occur that this problem was discovered by code reading Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-10-18selftests/ftrace: Add riscv support for kprobe arg testsYu Liao
This is the riscv variant of commit 9855c4626c67 ("selftests/ftrace: Add ppc support for kprobe args tests"). Signed-off-by: Yu Liao <liaoyu15@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-18 20:06:24 +0000