| Age | Commit message (Collapse) | Author |
|---|
|
The below referenced commit correctly updated the computation of number
of segments (gso_size) by using only the gso payload size and
removing the header lengths.
With this change the regression test started failing. Update
the tests to match this new behavior.
Both IPv4 and IPv6 tests are updated, as a separate patch in this series
will update udp_v6_send_skb to match this change in udp_send_skb.
Fixes: 158390e45612 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding btf_dump__new call to test_cpp, so we can
test C++ compilation with that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211223131736.483956-2-jolsa@kernel.org
|
|
Change the case that sends packets with "too short inner packet" to
include part of ethernet header, to make the trap to be triggered due to
the correct reason.
According to ASIC arch, the trap is triggered if overlay packet length is
less than 18B, and the minimum inner packet should include source MAC and
destination MAC.
Till now the case passed because one of the reserved bits in VxLAN
header was used. This issue was found while adding an equivalent test
for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test configures VxLAN with IPv6 underlay and verifies that the
expected traps are triggered under the right conditions.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-2 and above, which support up to four
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-1 switches, which support up to five
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add test to verify FDB vetos of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vxlan_fdb_veto.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add test to verify configuration of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Add separated test cases for learning which is not supported for IPv6
and for UDP checksum flags which are different from IPv4 flags.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vxlan.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Rename some functions to include "ipv4", so the next patch will add
equivalent functions for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add test to check Q-in-VNI traffic with IPv6 underlay and overlay.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a similar fashion to the asymmetric test, add a test for symmetric
routing. In symmetric routing both the ingress and egress VTEPs perform
routing in the overlay network into / from the VxLAN tunnel. Packets in
different directions use the same VNI - the L3 VNI.
Different tenants (VRFs) use different L3 VNIs.
Add a test which is similar to the existing IPv4 test to check IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In asymmetric routing the ingress VTEP routes the packet into the
correct VxLAN tunnel, whereas the egress VTEP only bridges the packet to
the correct host. Therefore, packets in different directions use
different VNIs - the target VNI.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test uses a simple topology with two VTEPs and two VNIs and verifies
that ping passes between hosts (local / remote) in the same VLAN (VNI)
and in different VLANs belonging to the same tenant (VRF).
While the test does not check VM mobility, it does configure an anycast
gateway using a macvlan device on both VTEPs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove `vxlan_ping_test()` which is not used and probably was copied
mistakenly from vxlan_bridge_1d.sh.
This was found while adding an equivalent test for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tests are very similar to their VLAN-unaware counterpart
(vxlan_bridge_1d_ipv6.sh and vxlan_bridge_1d_port_8472_ipv6.sh),
but instead of using multiple VLAN-unaware bridges, a single VLAN-aware
bridge is used with multiple VLANs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests similar to vxlan_bridge_1d.sh and vxlan_bridge_1d_port_8472.sh.
The tests set up a topology with three VxLAN endpoints: one
"local", possibly offloaded, and two "remote", formed using veth pairs
and likely purely software bridges. The "local" endpoint is connected to
host systems by a VLAN-unaware bridge.
Since VxLAN tunnels must be unique per namespace, each of the "remote"
endpoints is in its own namespace. H3 forms the bridge between the three
domains.
Send IPv4 packets and IPv6 packets with IPv6 underlay.
Use `TC_FLAG`, which is defined in `forwarding.config` file, for TC
checks. `TC_FLAG` allows testing that on HW datapath, the traffic
actually goes through HW.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
packets
Currently `ping_do()` and `ping6_do()` send 10 packets.
There are cases that it is not possible to catch only the interesting
packets using tc rule, so then, it is possible to send many packets and
verify that at least this amount of packets hit the rule.
Add `PING_COUNT` variable, which is set to 10 by default, to allow tests
sending more than 10 packets using the existing ping API.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If destination port is above 32k and source port below 16k
assume this might cause 'port shadowing' where a 'new' inbound
connection matches an existing one, e.g.
inbound X:41234 -> Y:53 matches existing conntrack entry
Z:53 -> X:4123, where Z got natted to X.
In this case, new packet is natted to Z:53 which is likely
unwanted.
We avoid the rewrite for connections that originate from local host:
port-shadowing is only possible with forwarded connections.
Also adjust test case.
v3: no need to call tuple_force_port_remap if already in random mode (Phil)
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull kvm fixes from Paolo Bonzini:
- Fix for compilation of selftests on non-x86 architectures
- Fix for kvm_run->if_flag on SEV-ES
- Fix for page table use-after-free if yielding during exit_mm()
- Improve behavior when userspace starts a nested guest with invalid
state
- Fix missed wakeup with assigned devices but no VT-d posted interrupts
- Do not tell userspace to save/restore an unsupported PMU MSR
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU
KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state
KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state
KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required
KVM: VMX: Always clear vmx->fail on emulation_required
selftests: KVM: Fix non-x86 compiling
KVM: x86: Always set kvm_run->if_flag
KVM: x86/mmu: Don't advance iterator after restart due to yielding
KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
|
|
We have a general signal fuzzer, sigfuz, which can modify the MSR & NIP
before sigreturn. But the chance of it hitting a kernel address and also
clearing MSR_PR is fairly slim.
So add a specific test of sigreturn to a kernel address, both with and
without attempting to clear MSR_PR (which the kernel must block).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211209115944.4062384-1-mpe@ellerman.id.au
|
|
Migration of vmtest to libbpf/ci will change the address
of INDEX in vmtest.sh, which will cause vmtest.sh to not
work due to the failure of rootfs fetching.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Link: https://lore.kernel.org/bpf/20211220050803.2670677-1-pulehui@huawei.com
|
|
Add a selftest to attempt to enter L2 with invalid guests state by
exiting to userspace via I/O from L2, and then using KVM_SET_SREGS to set
invalid guest state (marking TR unusable is arbitrary chosen for its
relative simplicity).
This is a regression test for a bug introduced by commit c8607e4a086f
("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if
!from_vmentry"), which incorrectly set vmx->fail=true when L2 had invalid
guest state and ultimately triggered a WARN due to nested_vmx_vmexit()
seeing vmx->fail==true while attempting to synthesize a nested VM-Exit.
The is also a functional test to verify that KVM sythesizes TRIPLE_FAULT
for L2, which is somewhat arbitrary behavior, instead of emulating L2.
KVM should never emulate L2 due to invalid guest state, as it's
architecturally impossible for L1 to run an L2 guest with invalid state
as nested VM-Enter should always fail, i.e. L1 needs to do the emulation.
Stuffing state via KVM ioctl() is a non-architctural, out-of-band case,
hence the TRIPLE_FAULT being rather arbitrary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-5-seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Attempting to compile on a non-x86 architecture fails with
include/kvm_util.h: In function ‘vm_compute_max_gfn’:
include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’
return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1;
^~
This is because the declaration of struct kvm_vm is in
lib/kvm_util_internal.h as an effort to make it private to
the test lib code. We can still provide arch specific functions,
though, by making the generic function symbols weak. Do that to
fix the compile error.
Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211214151842.848314-1-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"Two small fixes, one of which was being worked around in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Retry page fault if MMU reload is pending and root has no sp
KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
|
|
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend
on guest visible CPUIDs and (incorrect) KVM logic implementing it is
about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden
and causes test to fail.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add selftest cases in action police with skip_hw.
Add selftest case to validate flags of filter and action.
These tests depend on corresponding iproute2 command support.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This test verifies that a ksym of non-struct can not be directly
updated.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-10-haoluo@google.com
|
|
The kernel will crash without
'mptcp: clear 'kern' flag from fallback sockets' change.
Since this doesn't slow down testing in a noticeable way,
run this unconditionally.
The explicit test did not catch this, because the check was done
for tcp socket returned by 'socket(.. IPPROTO_TCP) rather than a
tcp socket returned by accept() on a mptcp listen fd.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There appears to be a spelling mistake in a bpf test message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211217182400.39296-1-colin.i.king@gmail.com
|
|
Add selftests for prog/map/prog+helper feature probing APIs. Prog and
map selftests are designed in such a way that they will always test all
the possible prog/map types, based on running kernel's vmlinux BTF enum
definition. This way we'll always be sure that when adding new BPF
program types or map types, libbpf will be always updated accordingly to
be able to feature-detect them.
BPF prog_helper selftest will have to be manually extended with
interesting and important prog+helper combinations, it's easy, but can't
be completely automated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-3-andrii@kernel.org
|
|
The SGX selftest fails to build on tip/x86/sgx:
main.c: In function ‘get_total_epc_mem’:
main.c:296:17: error: implicit declaration of function ‘__cpuid’ [-Werror=implicit-function-declaration]
296 | __cpuid(&eax, &ebx, &ecx, &edx);
| ^~~~~~~
Include cpuid.h and use __cpuid_count() macro in order to fix the
compilation issue.
[ dhansen: tweak commit message ]
Fixes: f0ff2447b861 ("selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211204202355.23005-1-jarkko@kernel.org
Cc: Shuah Khan <shuah@kernel.org>
|
|
Use '-o' within [] in order to avoid spawning two processes for test.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
'==' is a bashisms and not understood by POSIX shell. Drop it from
gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Add a set of tests for the new gpio-sim module. This is a pure shell
test-suite and uses the helper programs available in the gpio selftests
directory. These test-cases only test the functionalities exposed by the
gpio-sim driver, not those handled by core gpiolib code.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Add a simple program that allows to read GPIO line names from the
character device. This will be used in gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Add a simple program that allows to retrieve chip properties from the
GPIO character device. This will be used in gpio-sim selftests.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next
Kees writes:
lkdtm updates for v5.17-rc1
- Fix printk() usage during recursion (Ard Biesheuvel)
- Fix rodata section to actually have contents (Christophe Leroy)
- Add notes about lkdtm_kernel_info usage (Kees Cook)
- Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro)
* tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftest/lkdtm: Skip stack-entropy test if lkdtm is not available
lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()
lkdtm: avoid printk() in recursive_loop()
lkdtm: Note that lkdtm_kernel_info should be removed in the future
|
|
Make the verifier logs more readable, print the verifier states
on the corresponding instruction line. If the previous line was
not a bpf instruction, then print the verifier states on its own
line.
Before:
Validating test_pkt_access_subprog3() func#3...
86: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R10=fp0
; int test_pkt_access_subprog3(int val, struct __sk_buff *skb)
86: (bf) r6 = r2
87: R2=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0)
87: (bc) w7 = w1
88: R1=invP(id=0) R7_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123));
88: (bf) r1 = r6
89: R1_w=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0)
89: (85) call pc+9
Func#4 is global and valid. Skipping.
90: R0_w=invP(id=0)
90: (bc) w8 = w0
91: R0_w=invP(id=0) R8_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123));
91: (b7) r1 = 123
92: R1_w=invP123
92: (85) call pc+65
Func#5 is global and valid. Skipping.
93: R0=invP(id=0)
After:
86: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R10=fp0
; int test_pkt_access_subprog3(int val, struct __sk_buff *skb)
86: (bf) r6 = r2 ; R2=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0)
87: (bc) w7 = w1 ; R1=invP(id=0) R7_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123));
88: (bf) r1 = r6 ; R1_w=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0)
89: (85) call pc+9
Func#4 is global and valid. Skipping.
90: R0_w=invP(id=0)
90: (bc) w8 = w0 ; R0_w=invP(id=0) R8_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123));
91: (b7) r1 = 123 ; R1_w=invP123
92: (85) call pc+65
Func#5 is global and valid. Skipping.
93: R0=invP(id=0)
Signed-off-by: Christy Lee <christylee@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When printing verifier state for any log level, print full verifier
state only on function calls or on errors. Otherwise, only print the
registers and stack slots that were accessed.
Log size differences:
verif_scale_loop6 before: 234566564
verif_scale_loop6 after: 72143943
69% size reduction
kfree_skb before: 166406
kfree_skb after: 55386
69% size reduction
Before:
156: (61) r0 = *(u32 *)(r1 +0)
157: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8_w=00000000 fp-16_w=00\
000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000 fp-56_w=00000000 fp-64_w=00000000 fp-72_w=00000000 fp-80_w=00000\
000 fp-88_w=00000000 fp-96_w=00000000 fp-104_w=00000000 fp-112_w=00000000 fp-120_w=00000000 fp-128_w=00000000 fp-136_w=00000000 fp-144_w=00\
000000 fp-152_w=00000000 fp-160_w=00000000 fp-168_w=00000000 fp-176_w=00000000 fp-184_w=00000000 fp-192_w=00000000 fp-200_w=00000000 fp-208\
_w=00000000 fp-216_w=00000000 fp-224_w=00000000 fp-232_w=00000000 fp-240_w=00000000 fp-248_w=00000000 fp-256_w=00000000 fp-264_w=00000000 f\
p-272_w=00000000 fp-280_w=00000000 fp-288_w=00000000 fp-296_w=00000000 fp-304_w=00000000 fp-312_w=00000000 fp-320_w=00000000 fp-328_w=00000\
000 fp-336_w=00000000 fp-344_w=00000000 fp-352_w=00000000 fp-360_w=00000000 fp-368_w=00000000 fp-376_w=00000000 fp-384_w=00000000 fp-392_w=\
00000000 fp-400_w=00000000 fp-408_w=00000000 fp-416_w=00000000 fp-424_w=00000000 fp-432_w=00000000 fp-440_w=00000000 fp-448_w=00000000
; return skb->len;
157: (95) exit
Func#4 is safe for any args that match its prototype
Validating get_constant() func#5...
158: R1=invP(id=0) R10=fp0
; int get_constant(long val)
158: (bf) r0 = r1
159: R0_w=invP(id=1) R1=invP(id=1) R10=fp0
; return val - 122;
159: (04) w0 += -122
160: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=invP(id=1) R10=fp0
; return val - 122;
160: (95) exit
Func#5 is safe for any args that match its prototype
Validating get_skb_ifindex() func#6...
161: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R3=invP(id=0) R10=fp0
; int get_skb_ifindex(int val, struct __sk_buff *skb, int var)
161: (bc) w0 = w3
162: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R3=invP(id=0) R10=fp0
After:
156: (61) r0 = *(u32 *)(r1 +0)
157: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=ctx(id=0,off=0,imm=0)
; return skb->len;
157: (95) exit
Func#4 is safe for any args that match its prototype
Validating get_constant() func#5...
158: R1=invP(id=0) R10=fp0
; int get_constant(long val)
158: (bf) r0 = r1
159: R0_w=invP(id=1) R1=invP(id=1)
; return val - 122;
159: (04) w0 += -122
160: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
; return val - 122;
160: (95) exit
Func#5 is safe for any args that match its prototype
Validating get_skb_ifindex() func#6...
161: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R3=invP(id=0) R10=fp0
; int get_skb_ifindex(int val, struct __sk_buff *skb, int var)
161: (bc) w0 = w3
162: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R3=invP(id=0)
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211216213358.3374427-2-christylee@fb.com
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Exit with return code 4 if lkdtm is not available like other tests
in order to properly skip the test.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210805101236.1140381-1-misono.tomohiro@jp.fujitsu.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, wifi, bpf.
Relatively large batches of fixes from BPF and the WiFi stack, calm in
general networking.
Current release - regressions:
- dpaa2-eth: fix buffer overrun when reporting ethtool statistics
Current release - new code bugs:
- bpf: fix incorrect state pruning for <8B spill/fill
- iavf:
- add missing unlocks in iavf_watchdog_task()
- do not override the adapter state in the watchdog task (again)
- mlxsw: spectrum_router: consolidate MAC profiles when possible
Previous releases - regressions:
- mac80211 fixes:
- rate control, avoid driver crash for retransmitted frames
- regression in SSN handling of addba tx
- a memory leak where sta_info is not freed
- marking TX-during-stop for TX in in_reconfig, prevent stall
- cfg80211: acquire wiphy mutex on regulatory work
- wifi drivers: fix build regressions and LED config dependency
- virtio_net: fix rx_drops stat for small pkts
- dsa: mv88e6xxx: unforce speed & duplex in mac_link_down()
Previous releases - always broken:
- bpf fixes:
- kernel address leakage in atomic fetch
- kernel address leakage in atomic cmpxchg's r0 aux reg
- signed bounds propagation after mov32
- extable fixup offset
- extable address check
- mac80211:
- fix the size used for building probe request
- send ADDBA requests using the tid/queue of the aggregation
session
- agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid
deadlocks
- validate extended element ID is present
- mptcp:
- never allow the PM to close a listener subflow (null-defer)
- clear 'kern' flag from fallback sockets, prevent crash
- fix deadlock in __mptcp_push_pending()
- inet_diag: fix kernel-infoleak for UDP sockets
- xsk: do not sleep in poll() when need_wakeup set
- smc: avoid very long waits in smc_release()
- sch_ets: don't remove idle classes from the round-robin list
- netdevsim:
- zero-initialize memory for bpf map's value, prevent info leak
- don't let user space overwrite read only (max) ethtool parms
- ixgbe: set X550 MDIO speed before talking to PHY
- stmmac:
- fix null-deref in flower deletion w/ VLAN prio Rx steering
- dwmac-rk: fix oob read in rk_gmac_setup
- ice: time stamping fixes
- systemport: add global locking for descriptor life cycle"
* tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits)
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
sit: do not call ipip6_dev_free() from sit_init_net()
net: systemport: Add global locking for descriptor lifecycle
net/smc: Prevent smc_release() from long blocking
net: Fix double 0x prefix print in SKB dump
virtio_net: fix rx_drops stat for small pkts
dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED
sfc_ef100: potential dereference of null pointer
net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup
net: usb: lan78xx: add Allied Telesis AT29M2-AF
net/packet: rx_owner_map depends on pg_vec
netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
dpaa2-eth: fix ethtool statistics
ixgbe: set X550 MDIO speed before talking to PHY
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-16
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 434 insertions(+), 30 deletions(-).
The main changes are:
1) Fix incorrect verifier state pruning behavior for <8B register spill/fill,
from Paul Chaignon.
2) Fix x86-64 JIT's extable handling for fentry/fexit when return pointer
is an ERR_PTR(), from Alexei Starovoitov.
3) Fix 3 different possibilities that BPF verifier missed where unprivileged
could leak kernel addresses, from Daniel Borkmann.
4) Fix xsk's poll behavior under need_wakeup flag, from Magnus Karlsson.
5) Fix an oob-write in test_verifier due to a missed MAX_NR_MAPS bump,
from Kumar Kartikeya Dwivedi.
6) Fix a race in test_btf_skc_cls_ingress selftest, from Martin KaFai Lau.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
bpf, selftests: Update test case for atomic cmpxchg on r0 with pointer
bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg
bpf, selftests: Add test case for atomic fetch on spilled pointer
bpf: Fix kernel address leakage in atomic fetch
selftests/bpf: Fix OOB write in test_verifier
xsk: Do not sleep in poll() when need_wakeup set
selftests/bpf: Tests for state pruning with u32 spill/fill
bpf: Fix incorrect state pruning for <8B spill/fill
====================
Link: https://lore.kernel.org/r/20211216210005.13815-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The libbpf CI reported occasional failure in btf_skc_cls_ingress:
test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0
bpf prog error at line 97
"error at line 97" means the bpf prog cannot find the listening socket
when the final ack is received. It then skipped processing
the syncookie in the final ack which then led to "recv_cookie:0".
The problem is the userspace program did not do accept() and went
ahead to close(listen_fd) before the kernel (and the bpf prog) had
a chance to process the final ack.
The fix is to add accept() call so that the userspace will wait for
the kernel to finish processing the final ack first before close()-ing
everything.
Fixes: 9a856cae2217 ("bpf: selftest: Add test_btf_skc_cls_ingress")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211216191630.466151-1-kafai@fb.com
|
|
Add a function to bpf_testmod that returns invalid kernel and user addresses.
Then attach an fexit program to that function that tries to read
memory through these addresses.
This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Cross building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Clear CROSS_COMPILE for bpftool
and the host libbpf, and use the clang flags for urandom_read and bench.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-7-jean-philippe@linaro.org
|
|
Add a test case which tries to taint map value pointer arithmetic into a
unknown scalar with subsequent export through the map.
Before fix:
# ./test_verifier 1186
#1186/u map access: trying to leak tained dst reg FAIL
Unexpected success to load!
verification time 24 usec
stack depth 8
processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
#1186/p map access: trying to leak tained dst reg FAIL
Unexpected success to load!
verification time 8 usec
stack depth 8
processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
Summary: 0 PASSED, 0 SKIPPED, 2 FAILED
After fix:
# ./test_verifier 1186
#1186/u map access: trying to leak tained dst reg OK
#1186/p map access: trying to leak tained dst reg OK
Summary: 2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Mitigation patching test iterates over a set of mitigations irrespective
of whether a certain mitigation is supported/available in the kernel.
This causes following messages on a kernel where some mitigations
are unavailable:
Spawned threads enabling/disabling mitigations ...
cat: entry_flush: No such file or directory
cat: uaccess_flush: No such file or directory
Waiting for timeout ...
OK
This patch adds a check for available mitigations in the kernel.
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/163941374362.36967.18016981579099073379.sendpatchset@1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa
|
|
The --jobs parameter for kunit_tool currently defaults to 8 CPUs,
regardless of the number available. For systems with significantly more
(or less), this is not as efficient. Instead, default --jobs to the
number of CPUs available to the process: while there are as many
superstitions as to exactly what the ideal jobs:CPU ratio is, this seems
sufficiently sensible to me.
A new helper function to get the default number of jobs is added:
get_default_jobs() -- this is used in kunit_tool_test instead of a
hardcoded value, or an explicit call to len(os.sched_getaffinity()), so
should be more flexible if this needs to change in the future.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After upgrading mypy and pytype from pip, we see 2 new errors when
running ./tools/testing/kunit/run_checks.py.
Error #1: mypy and pytype
They now deduce that importlib.util.spec_from_file_location() can return
None and note that we're not checking for this.
We validate that the arch is valid (i.e. the file exists) beforehand.
Add in an `asssert spec is not None` to appease the checkers.
Error #2: pytype bug https://github.com/google/pytype/issues/1057
It doesn't like `from datetime import datetime`, specifically that a
type shares a name with a module.
We can workaround this by either
* renaming the import or just using `import datetime`
* passing the new `--fix-module-collisions` flag to pytype.
We pick the first option for now because
* the flag is quite new, only in the 2021.11.29 release.
* I'd prefer if people can just run `pytype <file>`
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
