| Age | Commit message (Collapse) | Author |
|---|
|
To verify that this hash implements the Toeplitz hash function.
Additionally, provide a script toeplitz.sh to run the test in loopback mode
on a networking device of choice (see setup_loopback.sh). Since the
script modifies the NIC setup, it will not be run by selftests
automatically.
Tested:
./toeplitz.sh -i eth0 -irq_prefix <eth0_pattern> -t -6
carrier ready
rxq 0: cpu 14
rxq 1: cpu 20
rxq 2: cpu 17
rxq 3: cpu 23
cpu 14: rx_hash 0x69103ebc [saddr fda8::2 daddr fda8::1 sport 58938 dport 8000] OK rxq 0 (cpu 14)
...
cpu 20: rx_hash 0x257118b9 [saddr fda8::2 daddr fda8::1 sport 59258 dport 8000] OK rxq 1 (cpu 20)
count: pass=111 nohash=0 fail=0
Test Succeeded!
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement a GRO testsuite that expects Linux kernel GRO behavior.
All tests pass with the kernel software GRO stack. Run against a device
with hardware GRO to verify that it matches the software stack.
gro.c generates packets and sends them out through a packet socket. The
receiver in gro.c (run separately) receives the packets on a packet
socket, filters them by destination ports using BPF and checks the
packet geometry to see whether GRO was applied.
gro.sh provides a wrapper to run the gro.c in NIC loopback mode.
It is not included in continuous testing because it modifies network
configuration around a physical NIC: gro.sh sets the NIC in loopback
mode, creates macvlan devices on the physical device in separate
namespaces, and sends traffic generated by gro.c between the two
namespaces to observe coalescing behavior.
GRO coalescing is time sensitive.
Some tests may prove flaky on some hardware.
Note that this test suite tests for software GRO unless hardware GRO is
enabled (ethtool -K $DEV rx-gro-hw on).
To test, run ./gro.sh.
The wrapper will output success or failed test names, and generate
log.txt and stderr.
Sample log.txt result:
...
pure data packet of same size: Test succeeded
large data packets followed by a smaller one: Test succeeded
small data packets followed by a larger one: Test succeeded
...
Sample stderr result:
...
carrier ready
running test ipv4 data
Expected {200 }, Total 1 packets
Received {200 }, Total 1 packets.
...
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rewrite to skel and ASSERT macros as well while we are at it.
v3:
- replace -f with -A to make it work with busybox ping.
-A is available on both busybox and iputils, from the man page:
On networks with low RTT this mode is essentially equivalent to
flood mode.
v2:
- don't check result of bpf_map__fd (Yonghong Song)
- remove from .gitignore (Andrii Nakryiko)
- move ping_command into network_helpers (Andrii Nakryiko)
- remove assert() (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210804205524.3748709-1-sdf@google.com
|
|
The test was mistakenly using addr_gpa2hva on a gva and that happened
to work accidentally. Commit 106a2e766eae ("KVM: selftests: Lower the
min virtual address for misc page allocations") revealed this bug.
Fixes: 2c7f76b4c42b ("selftests: kvm: Add basic Hyper-V clocksources tests", 2021-03-18)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210804112057.409498-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Recently we added multi-queue support to netdevsim in commit d4861fc6be58
("netdevsim: Add multi-queue support"); add a few control-plane selftests
for sch_mq using this new feature.
Use nsPlugin.py to avoid network interface name collisions.
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-08-04
1) Fix a sysbot reported memory leak in xfrm_user_rcv_msg.
From Pavel Skripkin.
2) Revert "xfrm: policy: Read seqcount outside of rcu-read side
in xfrm_policy_lookup_bytype". This commit tried to fix a
lockin bug, but only cured some of the symptoms. A proper
fix is applied on top of this revert.
3) Fix a locking bug on xfrm state hash resize. A recent change
on sequence counters accidentally repaced a spinlock by a mutex.
Fix from Frederic Weisbecker.
4) Fix possible user-memory-access in xfrm_user_rcv_msg_compat().
From Dmitry Safonov.
5) Add initialiation sefltest fot xfrm_spdattr_type_t.
From Dmitry Safonov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds OOB support for AF_UNIX sockets.
The semantics is same as TCP.
The last byte of a message with the OOB flag is
treated as the OOB byte. The byte is separated into
a skb and a pointer to the skb is stored in unix_sock.
The pointer is used to enforce OOB semantics.
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Write down some ideas for additional coverage for floating point in case
someone feels inspired to look into them.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20210803140450.46624-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We provide interfaces for configuring the SVE vector length seen by
processes using prctl and also via /proc for configuring the default
values. Provide tests that exercise all these interfaces and verify that
they take effect as expected, though at present no test fully enumerates
all the possible vector lengths.
A subset of this is already tested via sve-probe-vls but the /proc
interfaces are not currently covered at all.
In preparation for the forthcoming support for SME, the Scalable Matrix
Extension, which has separately but similarly configured vector lengths
which we expect to offer similar userspace interfaces for, all the actual
files and prctls used are parameterised and we don't validate that the
architectural minimum vector length is the minimum we see.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20210803140450.46624-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently sve-probe-vls does not verify that the vector lengths reported
by the prctl() interface are actually what is reported by the architecture,
use the rdvl_sve() helper to validate this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20210803140450.46624-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
SVE provides an instruction RDVL which reports the currently configured
vector length. In order to validate that our vector length configuration
interfaces are working correctly without having to build the C code for
our test programs with SVE enabled provide a trivial assembly library
with a C callable function that executes RDVL. Since these interfaces
also control behaviour on exec*() provide a trivial wrapper program which
reports the currently configured vector length on stdout, tests can use
this to verify that behaviour on exec*() is as expected.
In preparation for providing similar helper functionality for SME, the
Scalable Matrix Extension, which allows separately configured vector
lengths to be read back both the assembler function and wrapper binary
have SVE included in their name.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20210803140450.46624-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Check that #UD is raised if bit 16 is clear in
HYPERV_CPUID_FEATURES.EDX and an 'XMM fast' hypercall is issued.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210730122625.112848-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We added check_gcr_el1_cswitch but did not ignore the generated binary,
add it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210728173539.6231-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This patch removed the 'raw gso min size - 1' test which
always fails now:
./in_netns.sh ./psock_snd -v -c -g -l "${mss}"
raw gso min size - 1 (expected to fail)
tx: 1524
rx: 1472
OK
After commit 7c6d2ecbda83 ("net: be more gentle about silly
gso requests coming from user"), we relaxed the min gso_size
check in virtio_net_hdr_to_skb().
So when a packet which is smaller then the gso_size,
GSO for this packet will not be set, the packet will be
send/recv successfully.
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrii Nakryiko says:
====================
bpf-next 2021-07-30
We've added 64 non-merge commits during the last 15 day(s) which contain
a total of 83 files changed, 5027 insertions(+), 1808 deletions(-).
The main changes are:
1) BTF-guided binary data dumping libbpf API, from Alan.
2) Internal factoring out of libbpf CO-RE relocation logic, from Alexei.
3) Ambient BPF run context and cgroup storage cleanup, from Andrii.
4) Few small API additions for libbpf 1.0 effort, from Evgeniy and Hengqi.
5) bpf_program__attach_kprobe_opts() fixes in libbpf, from Jiri.
6) bpf_{get,set}sockopt() support in BPF iterators, from Martin.
7) BPF map pinning improvements in libbpf, from Martynas.
8) Improved module BTF support in libbpf and bpftool, from Quentin.
9) Bpftool cleanups and documentation improvements, from Quentin.
10) Libbpf improvements for supporting CO-RE on old kernels, from Shuyi.
11) Increased maximum cgroup storage size, from Stanislav.
12) Small fixes and improvements to BPF tests and samples, from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
tools: bpftool: Complete metrics list in "bpftool prog profile" doc
tools: bpftool: Document and add bash completion for -L, -B options
selftests/bpf: Update bpftool's consistency script for checking options
tools: bpftool: Update and synchronise option list in doc and help msg
tools: bpftool: Complete and synchronise attach or map types
selftests/bpf: Check consistency between bpftool source, doc, completion
tools: bpftool: Slightly ease bash completion updates
unix_bpf: Fix a potential deadlock in unix_dgram_bpf_recvmsg()
libbpf: Add btf__load_vmlinux_btf/btf__load_module_btf
tools: bpftool: Support dumping split BTF by id
libbpf: Add split BTF support for btf__load_from_kernel_by_id()
tools: Replace btf__get_from_id() with btf__load_from_kernel_by_id()
tools: Free BTF objects at various locations
libbpf: Rename btf__get_from_id() as btf__load_from_kernel_by_id()
libbpf: Rename btf__load() as btf__load_into_kernel()
libbpf: Return non-null error on failures in libbpf_find_prog_btf_id()
bpf: Emit better log message if bpf_iter ctx arg btf_id == 0
tools/resolve_btfids: Emit warnings and patch zero id for missing symbols
bpf: Increase supported cgroup storage value size
libbpf: Fix race when pinning maps in parallel
...
====================
Link: https://lore.kernel.org/r/20210730225606.1897330-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Conflicting commits, all resolutions pretty trivial:
drivers/bus/mhi/pci_generic.c
5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
drivers/nfc/s3fwrn5/firmware.c
a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label")
46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
MAINTAINERS
7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Q1 and Q2 are numbers with *maximum* length of 384 bytes. If the
calculated length of Q1 and Q2 is less than 384 bytes, things will
go wrong.
E.g. if Q2 is 383 bytes, then
1. The bytes of q2 are copied to sigstruct->q2 in calc_q1q2().
2. The entire sigstruct->q2 is reversed, which results it being
256 * Q2, given that the last byte of sigstruct->q2 is added
to before the bytes given by calc_q1q2().
Either change in key or measurement can trigger the bug. E.g. an
unmeasured heap could cause a devastating change in Q1 or Q2.
Reverse exactly the bytes of Q1 and Q2 in calc_q1q2() before returning
to the caller.
Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX")
Link: https://lore.kernel.org/linux-sgx/20210301051836.30738-1-tianjia.zhang@linux.alibaba.com/
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
(mac80211) and netfilter trees.
Current release - regressions:
- mac80211: fix starting aggregation sessions on mesh interfaces
Current release - new code bugs:
- sctp: send pmtu probe only if packet loss in Search Complete state
- bnxt_en: add missing periodic PHC overflow check
- devlink: fix phys_port_name of virtual port and merge error
- hns3: change the method of obtaining default ptp cycle
- can: mcba_usb_start(): add missing urb->transfer_dma initialization
Previous releases - regressions:
- set true network header for ECN decapsulation
- mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
LRO
- phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
PHY
- sctp: fix return value check in __sctp_rcv_asconf_lookup
Previous releases - always broken:
- bpf:
- more spectre corner case fixes, introduce a BPF nospec
instruction for mitigating Spectre v4
- fix OOB read when printing XDP link fdinfo
- sockmap: fix cleanup related races
- mac80211: fix enabling 4-address mode on a sta vif after assoc
- can:
- raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
- j1939: j1939_session_deactivate(): clarify lifetime of session
object, avoid UAF
- fix number of identical memory leaks in USB drivers
- tipc:
- do not blindly write skb_shinfo frags when doing decryption
- fix sleeping in tipc accept routine"
* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
gve: Update MAINTAINERS list
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
can: mcba_usb_start(): add missing urb->transfer_dma initialization
can: hi311x: fix a signedness bug in hi3110_cmd()
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
bpf: Fix leakage due to insufficient speculative store bypass mitigation
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
sis900: Fix missing pci_disable_device() in probe and remove
net: let flow have same hash in two directions
nfc: nfcsim: fix use after free during module unload
tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
sctp: fix return value check in __sctp_rcv_asconf_lookup
nfc: s3fwrn5: fix undefined parameter values in dev_err()
net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
net/mlx5: Unload device upon firmware fatal error
net/mlx5e: Fix page allocation failure for ptp-RQ over SF
net/mlx5e: Fix page allocation failure for trap-RQ over SF
...
|
|
Update the script responsible for checking that the different types used
at various places in bpftool are synchronised, and extend it to check
the consistency of options between the help messages in the source code
and the manual pages.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-6-quentin@isovalent.com
|
|
Whenever the eBPF subsystem gains new elements, such as new program or
map types, it is necessary to update bpftool if we want it able to
handle the new items.
In addition to the main arrays containing the names of these elements in
the source code, there are also multiple locations to update:
- The help message in the do_help() functions in bpftool's source code.
- The RST documentation files.
- The bash completion file.
This has led to omissions multiple times in the past. This patch
attempts to address this issue by adding consistency checks for all
these different locations. It also verifies that the bpf_prog_type,
bpf_map_type and bpf_attach_type enums from the UAPI BPF header have all
their members present in bpftool.
The script requires no argument to run, it reads and parses the
different files to check, and prints the mismatches, if any. It
currently reports a number of missing elements, which will be fixed in a
later patch:
$ ./test_bpftool_synctypes.py
Comparing [...]/linux/tools/bpf/bpftool/map.c (map_type_name) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_MAP_CREATE_TYPES): {'ringbuf'}
Comparing BPF header (enum bpf_attach_type) and [...]/linux/tools/bpf/bpftool/common.c (attach_type_name): {'BPF_TRACE_ITER', 'BPF_XDP_DEVMAP', 'BPF_XDP', 'BPF_SK_REUSEPORT_SELECT', 'BPF_XDP_CPUMAP', 'BPF_SK_REUSEPORT_SELECT_OR_MIGRATE'}
Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/prog.c (do_help() ATTACH_TYPE): {'skb_verdict'}
Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/Documentation/bpftool-prog.rst (ATTACH_TYPE): {'skb_verdict'}
Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_PROG_ATTACH_TYPES): {'skb_verdict'}
Note that the script does NOT check for consistency between the list of
program types that bpftool claims it accepts and the actual list of
keywords that can be used. This is because bpftool does not "see" them,
they are ELF section names parsed by libbpf. It is not hard to parse the
section_defs[] array in libbpf, but some section names are associated
with program types that bpftool cannot load at the moment. For example,
some programs require a BTF target and an attach target that bpftool
cannot handle. The script may be extended to parse the array and check
only relevant values in the future.
The script is not added to the selftests' Makefile, because doing so
would require all patches with BPF UAPI change to also update bpftool.
Instead it is to be added to the CI.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-3-quentin@isovalent.com
|
|
Replace the calls to function btf__get_from_id(), which we plan to
deprecate before the library reaches v1.0, with calls to
btf__load_from_kernel_by_id() in tools/ (bpftool, perf, selftests).
Update the surrounding code accordingly (instead of passing a pointer to
the btf struct, get it as a return value from the function).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210729162028.29512-6-quentin@isovalent.com
|
|
Make sure to call btf__free() (and not simply free(), which does not
free all pointers stored in the struct) on pointers to struct btf
objects retrieved at various locations.
These were found while updating the calls to btf__get_from_id().
Fixes: 999d82cbc044 ("tools/bpf: enhance test_btf file testing to test func info")
Fixes: 254471e57a86 ("tools/bpf: bpftool: add support for func types")
Fixes: 7b612e291a5a ("perf tools: Synthesize PERF_RECORD_* for loaded BPF programs")
Fixes: d56354dc4909 ("perf tools: Save bpf_prog_info and BTF of new BPF programs")
Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Fixes: fa853c4b839e ("perf stat: Enable counting events for BPF programs")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210729162028.29512-5-quentin@isovalent.com
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix MTE shared page detection
- Enable selftest's use of PMU registers when asked to
s390:
- restore 5.13 debugfs names
x86:
- fix sizes for vcpu-id indexed arrays
- fixes for AMD virtualized LAPIC (AVIC)
- other small bugfixes
Generic:
- access tracking performance test
- dirty_log_perf_test command line parsing fix
- Fix selftest use of obsolete pthread_yield() in favour of
sched_yield()
- use cpu_relax when halt polling
- fixed missing KVM_CLEAR_DIRTY_LOG compat ioctl"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: add missing compat KVM_CLEAR_DIRTY_LOG
KVM: use cpu_relax when halt polling
KVM: SVM: use vmcb01 in svm_refresh_apicv_exec_ctrl
KVM: SVM: tweak warning about enabled AVIC on nested entry
KVM: SVM: svm_set_vintr don't warn if AVIC is active but is about to be deactivated
KVM: s390: restore old debugfs names
KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized
KVM: selftests: Introduce access_tracking_perf_test
KVM: selftests: Fix missing break in dirty_log_perf_test arg parsing
x86/kvm: fix vcpu-id indexed array sizes
KVM: x86: Check the right feature bit for MSR_KVM_ASYNC_PF_ACK access
docs: virt: kvm: api.rst: replace some characters
KVM: Documentation: Fix KVM_CAP_ENFORCE_PV_FEATURE_CPUID name
KVM: nSVM: Swap the parameter order for svm_copy_vmrun_state()/svm_copy_vmloadsave_state()
KVM: nSVM: Rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state()
KVM: arm64: selftests: get-reg-list: actually enable pmu regs in pmu sublist
KVM: selftests: change pthread_yield to sched_yield
KVM: arm64: Fix detection of shared VMAs on guest fault
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-29
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 14 day(s) which contain
a total of 20 files changed, 446 insertions(+), 138 deletions(-).
The main changes are:
1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer.
2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann,
Piotr Krysiuk and Benedict Schlueter.
3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently we added a new option, SKBMOD_F_ECN, to tc-skbmod(8). Add a
control-plane selftest for it.
Depends on kernel patch "net/sched: act_skbmod: Add SKBMOD_F_ECN option
support", as well as iproute2 patch "tc/skbmod: Introduce SKBMOD_F_ECN
option".
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current max cgroup storage value size is 4k (PAGE_SIZE). The other local
storages accept up to 64k (BPF_LOCAL_STORAGE_MAX_VALUE_SIZE). Let's align
max cgroup value size with the other storages.
For percpu, the max is 32k (PCPU_MIN_UNIT_SIZE) because percpu
allocator is not happy about larger values.
netcnt test is extended to exercise those maximum values
(non-percpu max size is close to, but not real max).
v4:
* remove inner union (Andrii Nakryiko)
* keep net_cnt on the stack (Andrii Nakryiko)
v3:
* refine SIZEOF_BPF_LOCAL_STORAGE_ELEM comment (Yonghong Song)
* anonymous struct in percpu_net_cnt & net_cnt (Yonghong Song)
* reorder free (Yonghong Song)
v2:
* cap max_value_size instead of BUILD_BUG_ON (Martin KaFai Lau)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727222335.4029096-1-sdf@google.com
|
|
This test measures the performance effects of KVM's access tracking.
Access tracking is driven by the MMU notifiers test_young, clear_young,
and clear_flush_young. These notifiers do not have a direct userspace
API, however the clear_young notifier can be triggered by marking a
pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages
that mechanism to enable access tracking on guest memory.
To measure performance this test runs a VM with a configurable number of
vCPUs that each touch every page in disjoint regions of memory.
Performance is measured in the time it takes all vCPUs to finish
touching their predefined region.
Example invocation:
$ ./access_tracking_perf_test -v 8
Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages
guest physical test memory offset: 0xffdfffff000
Populating memory : 1.337752570s
Writing to populated memory : 0.010177640s
Reading from populated memory : 0.009548239s
Mark memory idle : 23.973131748s
Writing to idle memory : 0.063584496s
Mark memory idle : 24.924652964s
Reading from idle memory : 0.062042814s
Breaking down the results:
* "Populating memory": The time it takes for all vCPUs to perform the
first write to every page in their region.
* "Writing to populated memory" / "Reading from populated memory": The
time it takes for all vCPUs to write and read to every page in their
region after it has been populated. This serves as a control for the
later results.
* "Mark memory idle": The time it takes for every vCPU to mark every
page in their region as idle through page_idle.
* "Writing to idle memory" / "Reading from idle memory": The time it
takes for all vCPUs to write and read to every page in their region
after it has been marked idle.
This test should be portable across architectures but it is only enabled
for x86_64 since that's all I have tested.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is a missing break statement which causes a fallthrough to the
next statement where optarg will be null and a segmentation fault will
be generated.
Fixes: 9e965bb75aae ("KVM: selftests: Add backing src parameter to dirty_log_perf_test")
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It turns out that certain types of early boot bugs can result in reboot
loops, even within a guest OS running under qemu/KVM. This commit
therefore upgrades the kvm-test-1-run-qemu.sh script's hang-detection
heuristics to detect such situations and to terminate the run when
they occur.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The kvm-test-1-run-qemu.sh script logs the torture-test start time and
also when it starts getting impatient for the test to finish. However, it
does not timestamp these log messages, which can make debugging needlessly
challenging. This commit therefore adds timestamps to these messages.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There was a time long ago when the "test" command's documentation
claimed that the "-a" and "-o" arguments did something useful.
But this documentation now suggests letting the shell execute
these boolean operators, so this commit applies that suggestion to
kvm-test-1-run-qemu.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit causes kvm-test-1-run-batch.sh to use the new
kvm-assign-cpus.sh and kvm-get-cpus-script.sh scripts to create a
TORTURE_AFFINITY environment variable containing either an empty string
(for no affinity) or a list of CPUs to pin the scenario's vCPUs to.
The additional change to kvm-test-1-run.sh places the per-scenario
number-of-CPUs information where it can easily be found.
If there is some reason why affinity cannot be supplied, this commit
prints and logs the reason via changes to kvm-again.sh.
Finally, this commit updates the kvm-remote.sh script to copy the
qemu-affinity output files back to the host system.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There is "qemu-affinity", "qemu-cmd", "qemu-retval", but also "qemu_pid".
This is hard to remember, not so good for bash tab completion, and just
plain inconsistent. This commit therefore renames the "qemu_pid" file to
"qemu-pid". A couple of the scripts must deal with old runs, and thus
must handle both "qemu_pid" and "qemu-pid", but new runs will produce
"qemu-pid".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The jitter.sh script has some entertaining awk code to generate a
hex mask from a randomly selected CPU number, which is handed to the
"taskset" command. Except that this command has a "-c" parameter to
take a comma/dash-separated list of CPU numbers. This commit therefore
saves a few lines of awk by switching to a single-number CPU list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There is no way to place the vCPUs in a two-CPU rcutorture scenario to
get variable memory latency. This commit therefore upgrades the current
two-CPU rcutorture scenarios to four CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit causes the kvm-test-1-run-qemu.sh script to check the
TORTURE_AFFINITY environment variable and to add "taskset" commands to
the qemu-cmd file. The first "taskset" command is applied only if the
TORTURE_AFFINITY environment variable is a non-empty string, and this
command pins the current scenario's guest OS to the specified CPUs.
The second "taskset" command reports the guest OS's affinity in a new
"qemu-affinity" file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, kvm-test-1-run-qemu.sh applies redirection to each and every
line of each qemu-cmd script. Only the first line (the only one that
is not a bash comment) needs to be redirected. Although redirecting
the comments is currently harmless, just adding to the comment, it is
an accident waiting to happen. This commit therefore adjusts the "sed"
command to redirect only the qemu-system* command itself.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit causes kvm.sh to use the new kvm-assign-cpus.sh and
kvm-get-cpus-script.sh scripts to create a TORTURE_AFFINITY environment
variable containing either an empty string (for no affinity) or a list
of CPUs to pin the scenario's vCPUs to. A later commit will make
use of this information to actually pin the vCPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
We need the driver-core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the tc_redirect test only use ping6 if it's available and
otherwise fall back to using "ping -6".
Signed-off-by: Jussi Maki <joamaki@gmail.com>
|
|
Add a simple selftest for a move_mount(MOVE_MOUNT_SET_GROUP). This tests
that one can copy sharing from one mount from nested mntns with nested
userns owner to another mount from other nested mntns with other nested
userns owner while in their parent userns.
TAP version 13
1..1
# Starting 1 tests from 2 test cases.
# RUN move_mount_set_group.complex_sharing_copying ...
# OK move_mount_set_group.complex_sharing_copying
ok 1 move_mount_set_group.complex_sharing_copying
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lore.kernel.org/r/20210715100714.120228-2-ptikhomirov@virtuozzo.com
Cc: Shuah Khan <shuah@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Mattias Nissler <mnissler@chromium.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: lkml <linux-kernel@vger.kernel.org>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
We need the char-misc fixes from 5.14-rc3 into here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This test passes pointers obtained from anon_allocate_area to the
userfaultfd and mremap APIs. This causes a problem if the system
allocator returns tagged pointers because with the tagged address ABI
the kernel rejects tagged addresses passed to these APIs, which would
end up causing the test to fail. To make this test compatible with such
system allocators, stop using the system allocator to allocate memory in
anon_allocate_area, and instead just use mmap.
Link: https://lkml.kernel.org/r/20210714195437.118982-3-pcc@google.com
Link: https://linux-review.googlesource.com/id/Icac91064fcd923f77a83e8e133f8631c5b8fc241
Fixes: c47174fc362a ("userfaultfd: selftest")
Co-developed-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alistair Delva <adelva@google.com>
Cc: William McVicker <willmcvicker@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mitch Phillips <mitchp@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: <stable@vger.kernel.org> [5.4]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a list of vmtest script dependencies to make it easier for new
contributors to get going.
Signed-off-by: Evgeniy Litvinenko <evgeniyl@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210723223645.907802-1-evgeniyl@fb.com
|
|
Add bpf_map__pin_path, so that the inconsistently named
bpf_map__get_pin_path can be deprecated later. This is part of the
effort towards libbpf v1.0: https://github.com/libbpf/libbpf/issues/307
Also, add a selftest for the new function.
Signed-off-by: Evgeniy Litvinenko <evgeniyl@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210723221511.803683-1-evgeniyl@fb.com
|
|
This patch adds tests for the batching and bpf_(get|set)sockopt in
bpf tcp iter.
It first creates:
a) 1 non SO_REUSEPORT listener in lhash2.
b) 256 passive and active fds connected to the listener in (a).
c) 256 SO_REUSEPORT listeners in one of the lhash2 bucket.
The test sets all listeners and connections to bpf_cubic before
running the bpf iter.
The bpf iter then calls setsockopt(TCP_CONGESTION) to switch
each listener and connection from bpf_cubic to bpf_dctcp.
The bpf iter has a random_retry mode such that it can return EAGAIN
to the usespace in the middle of a batch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200625.1036874-1-kafai@fb.com
|
|
Conflicts are simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow to specify decimal offset in SEC macro, like:
SEC("kprobe/bpf_fentry_test7+5")
Add selftest for that.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20210721215810.889975-3-jolsa@kernel.org
|
|
Previously, the newly introduced test case in test_map_in_map(), which
checks whether the inner map is destroyed after unsuccessful creation of
the outer map, logged the following harmless and expected error:
libbpf: map 'mim': failed to create: Invalid argument(-22) libbpf:
failed to load object './test_map_in_map_invalid.o'
To avoid any possible confusion, mute the logging during loading of the
prog.
Fixes: 08f71a1e39a1 ("selftests/bpf: Check inner map deletion")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721140941.563175-1-m@lambda.lt
|
|
Pull networking fixes from David Miller:
1) Fix type of bind option flag in af_xdp, from Baruch Siach.
2) Fix use after free in bpf_xdp_link_release(), from Xuan Zhao.
3) PM refcnt imbakance in r8152, from Takashi Iwai.
4) Sign extension ug in liquidio, from Colin Ian King.
5) Mising range check in s390 bpf jit, from Colin Ian King.
6) Uninit value in caif_seqpkt_sendmsg(), from Ziyong Xuan.
7) Fix skb page recycling race, from Ilias Apalodimas.
8) Fix memory leak in tcindex_partial_destroy_work, from Pave Skripkin.
9) netrom timer sk refcnt issues, from Nguyen Dinh Phi.
10) Fix data races aroun tcp's tfo_active_disable_stamp, from Eric
Dumazet.
11) act_skbmod should only operate on ethernet packets, from Peilin Ye.
12) Fix slab out-of-bpunds in fib6_nh_flush_exceptions(),, from Psolo
Abeni.
13) Fix sparx5 dependencies, from Yajun Deng.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
dpaa2-switch: seed the buffer pool after allocating the swp
net: sched: cls_api: Fix the the wrong parameter
net: sparx5: fix unmet dependencies warning
net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum
net: dsa: ensure linearized SKBs in case of tail taggers
ravb: Remove extra TAB
ravb: Fix a typo in comment
net: dsa: sja1105: make VID 4095 a bridge VLAN too
tcp: disable TFO blackhole logic by default
sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set
net: ixp46x: fix ptp build failure
ibmvnic: Remove the proper scrq flush
selftests: net: add ESP-in-UDP PMTU test
udp: check encap socket in __udp_lib_err
sctp: update active_key for asoc when old key is being replaced
r8169: Avoid duplicate sysfs entry creation error
ixgbe: Fix packet corruption due to missing DMA sync
Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"
ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions
fsl/fman: Add fibre support
...
|
