Age | Commit message (Collapse) | Author |
|
The parent commit fixes an issue around these counters where one of them
-- MPJoinAckHMacFailure -- was wrongly incremented in some cases.
This makes sure the counter is always 0. It should be incremented only
in case of corruption, or a wrong implementation, which should not be
the case in these selftests.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-2-3c9ecd0a3a50@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Testcase should fail if -EWOULDBLOCK is not returned when expected value
differs from actual value from the waiter.
Link: https://lore.kernel.org/r/20250404221225.1596324-1-edliaw@google.com
Fixes: 9d57f7c79748920636f8293d2f01192d702fe390 ("selftests: futex: Test sys_futex_waitv() wouldblock")
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix test count with late test plan.
For example,
TAP version 13
ok 1 test1
1..4
Returns a count of 1 passed, 1 crashed (because it expects tests after
the test plan): returning the total count of 2 tests
Change this to be 1 passed, 1 error: total count of 1 test
Link: https://lore.kernel.org/r/20250319223351.1517262-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
Use POSIX-conformant expression operator symbol '='.
The use of the non POSIX-conformant symbol '==' would work
in bash, but not in sh where the unexpected operator error
would result in test_smoke.sh being skipped.
Instead of changing the shebang to use bash, which may not be
available on all systems, use the POSIX-conformant expression
symbol '=' to test for equality.
Without this patch:
===================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# ./test_smoke.sh: 9: [: 2: unexpected operator
ok 1 selftests: tpm2: test_smoke.sh # SKIP
With this patch:
================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# Ran 9 tests in 9.236s
ok 1 selftests: tpm2: test_smoke.sh
Link: https://lore.kernel.org/r/37ztyakgrrtgvec344mg7mspchwjpxxtsprtjidso3pwkmm4f4@awsa5mzgqmtb
Signed-off-by: Ahmed Salem <x0rw3ll@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The tpm2 selftests produce two logs: SpaceTest.log and
AsyncTest.log. Only SpaceTest.log was listed in selftests/.gitignore,
while AsyncTest.log remained untracked.
This change creates a dedicated .gitignore in the tpm2/ directory to
manage these entries, keeping tpm2-specific patterns isolated from
parent .gitignore.
Fixed white-space errors during commit
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250126195147.902608-1-khaledelnaggarlinux@gmail.com
Signed-off-by: Khaled Elnaggar <khaledelnaggarlinux@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- A number of cpuset remote partition related fixes and cleanups along
with selftest updates.
- A change from this merge window made cgroup_rstat_updated_list()
called outside cgroup_rstat_lock leading to list corruptions. Fix it
by relocating the call inside the lock.
* tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix race between newly created partition and dying one
cgroup: rstat: call cgroup_rstat_updated_list with cgroup_rstat_lock
selftest/cgroup: Add a remote partition transition test to test_cpuset_prs.sh
selftest/cgroup: Clean up and restructure test_cpuset_prs.sh
selftest/cgroup: Update test_cpuset_prs.sh to use | as effective CPUs and state separator
cgroup/cpuset: Remove unneeded goto in sched_partition_write() and rename it
cgroup/cpuset: Code cleanup and comment update
cgroup/cpuset: Don't allow creation of local partition over a remote one
cgroup/cpuset: Remove remote_partition_check() & make update_cpumasks_hier() handle remote partition
cgroup/cpuset: Fix error handling in remote_partition_disable()
cgroup/cpuset: Fix incorrect isolated_cpus update in update_parent_effective_cpumask()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64: First batch of fixes for 6.15
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
- Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
- Fix KVM guest driver to match PV CPUID hypercall ABI.
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
|
|
"Inspired" by syzbot test, pre-queue some data, disconnect()
and try to receive(). This used to trigger a warning in TLS's strp.
Now we expect the disconnect() to have almost no effect.
Link: https://lore.kernel.org/67e6be74.050a0220.2f068f.007e.GAE@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250404180334.3224206-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case for FQ_CODEL with ETS parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-6-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case for FQ_CODEL with DRR parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-5-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case for FQ_CODEL with HFSC parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-4-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case for FQ_CODEL with QFQ parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-3-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case for FQ_CODEL with HTB parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-2-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
hds.py has been testing 0(set_hds_thresh_zero()),
MAX(set_hds_thresh_max()), GT(set_hds_thresh_gt()) values for hds-thresh.
However if a hds-thresh value was already 0, set_hds_thresh_zero()
can't test properly.
So, it tests random value first and then tests 0, MAX, GT values.
Testing bnxt:
TAP version 13
1..13
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by
the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_random
ok 6 hds.set_hds_thresh_zero
ok 7 hds.set_hds_thresh_max
ok 8 hds.set_hds_thresh_gt
ok 9 hds.set_xdp
ok 10 hds.enabled_set_xdp
ok 11 hds.ioctl
ok 12 hds.ioctl_set_xdp
ok 13 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:1 error:0
Testing lo:
TAP version 13
1..13
ok 1 hds.get_hds # SKIP tcp-data-split not supported by device
ok 2 hds.get_hds_thresh # SKIP hds-thresh not supported by device
ok 3 hds.set_hds_disable # SKIP ring-set not supported by the device
ok 4 hds.set_hds_enable # SKIP ring-set not supported by the device
ok 5 hds.set_hds_thresh_random # SKIP hds-thresh not supported by
device
ok 6 hds.set_hds_thresh_zero # SKIP ring-set not supported by the
device
ok 7 hds.set_hds_thresh_max # SKIP hds-thresh not supported by
device
ok 8 hds.set_hds_thresh_gt # SKIP hds-thresh not supported by device
ok 9 hds.set_xdp # SKIP tcp-data-split not supported by device
ok 10 hds.enabled_set_xdp # SKIP tcp-data-split not supported by
device
ok 11 hds.ioctl # SKIP tcp-data-split not supported by device
ok 12 hds.ioctl_set_xdp # SKIP tcp-data-split not supported by
device
ok 13 hds.ioctl_enabled_set_xdp # SKIP tcp-data-split not supported
by device
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:13 error:0
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250404122126.1555648-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test to check memblock_set_node() behavior.
And create a corner case in which the memblock.reserved array is doubled
during memblock_set_node(). And finally make sure all regions in
memblock.reserved are with valid node id.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
CC: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20250318071948.23854-4-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Fix mutex and free_reserved_area() related build errors which have
been introduced by commit 74e2498ccf7b ("mm/memblock: Add reserved
memory release function").
Fixes: 74e2498ccf7b ("mm/memblock: Add reserved memory release function")
Reported-by: Wei Yang <richard.weiyang@gmail.com>
Closes: https://lore.kernel.org/all/20250405023018.g2ae52nrz2757b3n@master/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/174399023133.47537.7375975856054461445.stgit@devnote2
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Atomic instructions such as 'ldset' in the guest have been observed to
cause an EL1 data abort with FSC 0x35 (IMPLEMENTATION DEFINED fault
(Unsupported Exclusive or Atomic access)) on Neoverse-N3.
Per DDI0487L.a B2.2.6, atomic instructions are only architecturally
guaranteed for Inner/Outer Shareable Normal Write-Back memory. For
anything else the behavior is IMPLEMENTATION DEFINED and can lose
atomicity, or, in this case, generate an abort.
It would appear that selftests sets up the stage-1 mappings as Non
Shareable, leading to the observed abort. Explicitly set the
Shareability field to Inner Shareable for non-LPA2 page tables. Note
that for the LPA2 page table format, translations for cacheable memory
inherit the shareability attribute of the PTW, i.e. TCR_ELx.SH{0,1}.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-3-rananta@google.com
[oliver: Rephrase changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The kvm selftest library for arm64 currently configures the hardware
fields, such as shift and mask in the page-table entries and registers,
directly with numbers. While it add comments at places, it's better to
rewrite them with appropriate macros to improve the readability and
reduce the risk of errors. Hence, introduce macros to define the
hardware fields and use them in the arm64 processor library.
Most of the definitions are primary copied from the Linux's header,
arch/arm64/include/asm/pgtable-hwdef.h.
No functional change intended.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Currently, the res_spin_lock test is too chatty as it constantly prints
the test_run results for each iteration in each thread, so in case
verbose output is requested or things go wrong, it will flood the logs
of CI and other systems with repeated messages that offer no valuable
insight. Reduce this by doing assertions when the condition actually
flips, and proceed to break out and exit the threads. We still assert
to mark the test as failed and print the expected and reported values.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250403220841.66654-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
All modules that need CONFIG_CRC_T10DIF already select it, so there is no
need to bother users about the option.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- four fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so
that the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen"
* tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
selftests: net: amt: indicate progress in the stress test
netlink: specs: rt_route: pull the ifa- prefix out of the names
netlink: specs: rt_addr: pull the ifa- prefix out of the names
netlink: specs: rt_addr: fix get multi command name
netlink: specs: rt_addr: fix the spec format / schema failures
net: avoid false positive warnings in __net_mp_close_rxq()
net: move mp dev config validation to __net_mp_open_rxq()
net: ibmveth: make veth_pool_store stop hanging
arcnet: Add NULL check in com20020pci_probe()
ipv6: Do not consider link down nexthops in path selection
ipv6: Start path selection from the first nexthop
usbnet:fix NPE during rx_complete
net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP
net: fix geneve_opt length integer overflow
io_uring/zcrx: fix selftests w/ updated netdev Python helpers
selftests: net: use netdevsim in netns test
docs: net: document netdev notifier expectations
net: dummy: request ops lock
netdevsim: add dummy device notifiers
net: rename rtnl_net_debug to lock_debug
...
|
|
Our CI expects output from the test at least once every 10 minutes.
The AMT test when running on debug kernel is just on the edge
of that time for the stress test. Improve the output:
- print the name of the test first, before starting it,
- output a dot every 10% of the way.
Output after:
TEST: amt discovery [ OK ]
TEST: IPv4 amt multicast forwarding [ OK ]
TEST: IPv6 amt multicast forwarding [ OK ]
TEST: IPv4 amt traffic forwarding torture .......... [ OK ]
TEST: IPv6 amt traffic forwarding torture .......... [ OK ]
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250403145636.2891166-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in addr-attrs and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Fixes: dfb0f7d9d979 ("doc/netlink: Add spec for rt addr messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Command names should match C defines, codegens may depend on it.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 4f280376e531 ("selftests/net: Add selftest for IPv4 RTM_GETMULTICAST support")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
|
|
Add a "-l <latency>" param to the rseq test so that the user can override
/dev/cpu_dma_latency, as described by the test's suggested workaround for
not being able to complete enough migrations.
cpu_dma_latency is not a normal file, even as far as procfs files go.
Writes to cpu_dma_latency only persist so long as the file is open, e.g.
so that the kernel automatically reverts back to a power-optimized state
once the sensitive workload completes. Provide the necessary functionality
instead of effectively forcing the user to write a non-obvious wrapper.
Cc: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Cc: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401142238.819487-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Several tests cover infrastructure from virt/kvm/ and userspace APIs that have
only minimal requirements from architecture-specific code. As such, they are
available on all architectures that have libkvm support, and this presumably
will apply also in the future (for example if loongarch gets selftests support).
Put them in a separate variable and list them only once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250401141327.785520-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250331221851.614582-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Run each testcase in a separate VMs to cover more possibilities;
move WRMSR close to MONITOR/MWAIT to test updating CPUID bits
while in the VM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 57ed58c13256 ("selftests: ublk: enable zero copy for stripe target")
added test entry of test_stripe_04, but forgot to add the test script.
So fix the test by adding the script file.
Reported-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250404001849.1443064-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull more io_uring updates from Jens Axboe:
"Set of fixes/updates for io_uring that should go into this release.
The ublk bits could've gone via either tree - usually I put them in
block, but they got a bit mixed this series with the zero-copy
supported that ended up dipping into both trees.
This contains:
- Fix for sendmsg zc, include in pinned pages accounting like we do
for the other zc types
- Series for ublk fixing request aborting, doing various little
cleanups, fixing some zc issues, and adding queue_rqs support
- Another ublk series doing some code cleanups
- Series cleaning up the io_uring send path, mostly in preparation
for registered buffers
- Series doing little MSG_RING cleanups
- Fix for the newly added zc rx, fixing len being 0 for the last
invocation of the callback
- Add vectored registered buffer support for ublk. With that, then
ublk also supports this feature in the kernel revision where it
could generically introduced for rw/net
- A bunch of selftest additions for ublk. This is the majority of the
diffstat
- Silence a KCSAN data race warning for io-wq
- Various little cleanups and fixes"
* tag 'io_uring-6.15-20250403' of git://git.kernel.dk/linux: (44 commits)
io_uring: always do atomic put from iowq
selftests: ublk: enable zero copy for stripe target
io_uring: support vectored kernel fixed buffer
block: add for_each_mp_bvec()
io_uring: add validate_fixed_range() for validate fixed buffer
selftests: ublk: kublk: fix an error log line
selftests: ublk: kublk: use ioctl-encoded opcodes
io_uring/zcrx: return early from io_zcrx_recv_skb if readlen is 0
io_uring/net: avoid import_ubuf for regvec send
io_uring/rsrc: check size when importing reg buffer
io_uring: cleanup {g,s]etsockopt sqe reading
io_uring: hide caches sqes from drivers
io_uring: make zcrx depend on CONFIG_IO_URING
io_uring: add req flag invariant build assertion
Documentation: ublk: remove dead footnote
selftests: ublk: specify io_cmd_buf pointer type
ublk: specify io_cmd_buf pointer type
io_uring: don't pass ctx to tw add remote helper
io_uring/msg: initialise msg request opcode
io_uring/msg: rename io_double_lock_ctx()
...
|
|
Fix io_uring zero copy rx selftest with updated netdev Python helpers.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250402172414.895276-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netdevsim has extra register_netdevice_notifier_dev_net notifiers,
use netdevim instead of dummy device to test them out.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-9-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"We see a net reduction of the number of lines of code thanks to the
removal of a now unused driver and a testing tool that is not used
anymore. Apart from this, the max31335 driver gets support for a new
part number and pm8xxx gets UEFI support.
Core:
- setdate is removed as it has better replacements
- skip alarms with a second resolution when we know the RTC doesn't
support those.
Subsystem:
- remove unnecessary private struct members
- use devm_pm_set_wake_irq were relevant
Drivers:
- ds1307: stop disabling alarms on probe for DS1337, DS1339, DS1341
and DS3231
- max31335: add max31331 support
- pcf50633 is removed as support for the related SoC has been removed
- pcf85063: properly handle POR failures"
* tag 'rtc-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: remove 'setdate' test program
selftest: rtc: skip some tests if the alarm only supports minutes
rtc: mt6397: drop unused defines
rtc: pcf85063: replace dev_err+return with return dev_err_probe
rtc: pcf85063: do a SW reset if POR failed
rtc: max31335: Add driver support for max31331
dt-bindings: rtc: max31335: Add max31331 support
rtc: cros-ec: Avoid a couple of -Wflex-array-member-not-at-end warnings
dt-bindings: rtc: pcf2127: Reference spi-peripheral-props.yaml
rtc: rzn1: implement one-second accuracy for alarms
rtc: pcf50633: Remove
rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
rtc: pm8xxx: mitigate flash wear
rtc: pm8xxx: add support for uefi offset
dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
rtc: rv3032: drop WADA
rtc: rv3032: fix EERD location
rtc: pm8xxx: switch to devm_device_init_wakeup
rtc: pm8xxx: fix possible race condition
rtc: mpfs: switch to devm_device_init_wakeup
...
|
|
self-connect-ipv6 got slightly flaky on netdev:
> # timeout set to 120
> # selftests: net/tcp_ao: self-connect_ipv6
> # 1..5
> # # 708[lib/setup.c:250] rand seed 1742872572
> # TAP version 13
> # # 708[lib/proc.c:213] Snmp6 Ip6OutNoRoutes: 0 => 1
> # not ok 1 # error 708[self-connect.c:70] failed to connect()
> # ok 2 No unexpected trace events during the test run
> # # Planned tests != run tests (5 != 2)
> # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:1
> ok 1 selftests: net/tcp_ao: self-connect_ipv6
I can not reproduce it on my machines, but judging by "Ip6OutNoRoutes"
there is no route to the local_addr (::1).
Looking at the kernel code, I see that kernel does add link-local
address automatically in init_loopback(), but that is called from
ipv6 notifier block. So, in turn the userspace that brought up
the loopback interface may see rtnetlink ACK earlier than
addrconf_notify() does it's job (at least, on a slow VM such as netdev).
Probably, for ipv4 it's the same, judging by inetdev_event().
The fix is quite simple: set the link-local route straight after
bringing the loopback interface. That will make it synchronous.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250402-tcp-ao-selfconnect-flake-v1-1-8388d629ef3d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF selftests expectations of assembler output and struct layout
(Song Liu and Yonghong Song)
- Fix XSK error code when queue is full (Wang Liang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix verifier_private_stack test failure
selftests/bpf: Fix verifier_bpf_fastcall test
selftests/bpf: Fix tests after fields reorder in struct file
xsk: Fix __xsk_generic_xmit() error code when cq is full
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
|
|
Several verifier_private_stack tests failed with latest bpf-next.
For example, for 'Private stack, single prog' subtest, the
jitted code:
func #0:
0: f3 0f 1e fa endbr64
4: 0f 1f 44 00 00 nopl (%rax,%rax)
9: 0f 1f 00 nopl (%rax)
c: 55 pushq %rbp
d: 48 89 e5 movq %rsp, %rbp
10: f3 0f 1e fa endbr64
14: 49 b9 58 74 8a 8f 7d 60 00 00 movabsq $0x607d8f8a7458, %r9
1e: 65 4c 03 0c 25 28 c0 48 87 addq %gs:-0x78b73fd8, %r9
27: bf 2a 00 00 00 movl $0x2a, %edi
2c: 49 89 b9 00 ff ff ff movq %rdi, -0x100(%r9)
33: 31 c0 xorl %eax, %eax
35: c9 leave
36: e9 20 5d 0f e1 jmp 0xffffffffe10f5d5b
The insn 'addq %gs:-0x78b73fd8, %r9' does not match the expected
regex 'addq %gs:0x{{.*}}, %r9' and this caused test failure.
Fix it by changing '%gs:0x{{.*}}' to '%gs:{{.*}}' to accommodate the
possible negative offset. A few other subtests are fixed in a similar way.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250331033828.365077-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit [1] moves percpu data on x86 from address 0x000... to address
0xfff...
Before [1]:
159020: 0000000000030700 0 OBJECT GLOBAL DEFAULT 23 pcpu_hot
After [1]:
152602: ffffffff83a3e034 4 OBJECT GLOBAL DEFAULT 35 pcpu_hot
As a result, verifier_bpf_fastcall tests should now expect a negative
value for pcpu_hot, IOW, the disassemble should show "r=" instead of
"w=".
Fix this in the test.
Note that, a later change created a new variable "cpu_number" for
bpf_get_smp_processor_id() [2]. The inlining logic is updated properly
as part of this change, so there is no need to fix anything on the
kernel side.
[1] commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets")
[2] commit 01c7bc5198e9 ("x86/smp: Move cpu number to percpu hot section")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250328193124.808784-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The change in struct file [1] moved f_ref to the 3rd cache line.
It made *(u64 *)file dereference invalid from the verifier point of view,
because btf_struct_walk() walks into f_lock field, which is 4-byte long.
Fix the selftests to deference the file pointer as a 4-byte access.
[1] commit e249056c91a2 ("fs: place f_ref to 3rd cache line in struct file to resolve false sharing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250327185528.1740787-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
|
|
In iproute 6.14, the nat ip mask logic was fixed to remove an undefined
behaviour[1]. So now instead of reporting '0.0.0.0/32' on x86 and potentially
'0.0.0.0/0' in other platforms, it reports '0.0.0.0/0' in all platforms.
[1] https://lore.kernel.org/netdev/20250306112520.188728-1-torben.nielsen@prevas.dk/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://patch.msgid.link/20250401144908.568140-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Add a new maintainer for configfs
- Fix exportfs module description
- Place flexible array memeber at the end of an internal struct in the
mount code
- Add new maintainer for netfslib as Jeff Layton is stepping down as
current co-maintainer
- Fix error handling in cachefiles_get_directory()
- Cleanup do_notify_pidfd()
- Fix syscall number definitions in pidfd selftests
- Fix racy usage of fs_struct->in exec during multi-threaded exec
- Ensure correct exit code is reported when pidfs_exit() is called from
release_task() for a delayed thread-group leader exit
- Fix conflicting iomap flag definitions
* tag 'vfs-6.15-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix conflicting values of iomap flags
fs: namespace: Avoid -Wflex-array-member-not-at-end warning
MAINTAINERS: configfs: add Andreas Hindborg as maintainer
exportfs: add module description
exit: fix the usage of delay_group_leader->exit_code in do_notify_parent() and pidfs_exit()
netfs: add Paulo as maintainer and remove myself as Reviewer
cachefiles: Fix oops in vfs_mkdir from cachefiles_get_directory
exec: fix the racy usage of fs_struct->in_exec
selftests/pidfd: fixes syscall number defines
pidfs: cleanup the usage of do_notify_pidfd()
|
|
Add a test case to validate the interaction between TBF and SKBPRIO queueing
disciplines, specifically targeting queue length accounting corner cases.
This test complements the fix for the queue length accounting issue in the
SKBPRIO qdisc. This is still best-effort, as timing and manipulating enqueue
and dequeue from user-space is very hard.
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250329222536.696204-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use io_uring vectored fixed kernel buffer for handling stripe IO.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250325135155.935398-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
|