| Age | Commit message (Collapse) | Author |
|---|
|
This test is missing a whole bunch of checks for interface
renaming and one ifup. Presumably it was only used on a system
with renaming disabled and NetworkManager running.
Fixes: 91f430b2c49d ("selftests: net: add a test for UDP tunnel info infra")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240123060529.1033912-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If there is more than 32 cpus the bitmask will start to contain
commas, leading to:
./rps_default_mask.sh: line 36: [: 00000000,00000000: integer expression expected
Remove the commas, bash doesn't interpret leading zeroes as oct
so that should be good enough. Switch to bash, Simon reports that
not all shells support this type of substitution.
Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122195815.638997-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
correctly
There are some feature fields with nonzero minimum valid value. Make
sure get_safe_value() won't return invalid field values for them.
Also fix a bug that wrongly uses the feature bits type as the feature
bits sign causing all fields as signed in the get_safe_value() and
get_invalid_value().
Fixes: 54a9ea73527d ("KVM: arm64: selftests: Test for setting ID register from usersapce")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Reported-by: Itaru Kitayama <itaru.kitayama@linux.dev>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20240115220210.3966064-2-jingzhangos@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
After the previous patch that speeded up the test (by avoiding neigh
discovery in IPv6), the BPF CI occasionally hits this error:
rcv tstamp unexpected pkt rcv tstamp: actual 0 == expected 0
The test complains about the cmsg returned from the recvmsg() does not
have the rcv timestamp. Setting skb->tstamp or not is
controlled by a kernel static key "netstamp_needed_key". The static
key is enabled whenever this is at least one sk with the SOCK_TIMESTAMP
set.
The test_redirect_dtime does use setsockopt() to turn on
the SOCK_TIMESTAMP for the reading sk. In the kernel
net_enable_timestamp() has a delay to enable the "netstamp_needed_key"
when CONFIG_JUMP_LABEL is set. This potential delay is the likely reason
for packet missing rcv timestamp occasionally.
This patch is to create udp sockets with SOCK_TIMESTAMP set.
It sends and receives some packets until the received packet
has a rcv timestamp. It currently retries at most 5 times with 1s
in between. This should be enough to wait for the "netstamp_needed_key".
It then holds on to the socket and only closes it at the end of the test.
This guarantees that the test has the "netstamp_needed_key" key turned
on from the beginning.
To simplify the udp sockets setup, they are sending/receiving packets
in the same netns (ns_dst is used) and communicate over the "lo" dev.
Hence, the patch enables the "lo" dev in the ns_dst.
Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-2-martin.lau@linux.dev
|
|
BPF CI has been reporting the tc_redirect_dtime test failing
from time to time:
test_inet_dtime:PASS:setns src 0 nsec
(network_helpers.c:253: errno: No route to host) Failed to connect to server
close_netns:PASS:setns 0 nsec
test_inet_dtime:FAIL:connect_to_fd unexpected connect_to_fd: actual -1 < expected 0
test_tcp_clear_dtime:PASS:tcp ip6 clear dtime ingress_fwdns_p100 0 nsec
The connect_to_fd failure (EHOSTUNREACH) is from the
test_tcp_clear_dtime() test and it is the very first IPv6 traffic
after setting up all the links, addresses, and routes.
The symptom is this first connect() is always slow. In my setup, it
could take ~3s.
After some tracing and tcpdump, the slowness is mostly spent in
the neighbor solicitation in the "ns_fwd" namespace while
the "ns_src" and "ns_dst" are fine.
I forced the kernel to drop the neighbor solicitation messages.
I can then reproduce EHOSTUNREACH. What actually happen could be:
- the neighbor advertisement came back a little slow.
- the "ns_fwd" namespace concluded a neighbor discovery failure
and triggered the ndisc_error_report() => ip6_link_failure() =>
icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0)
- the client's connect() reports EHOSTUNREACH after receiving
the ICMPV6_DEST_UNREACH message.
The neigh table of both "ns_src" and "ns_dst" namespace has already
been manually populated but not the "ns_fwd" namespace. This patch
fixes it by manually populating the neigh table also in the "ns_fwd"
namespace.
Although the namespace configuration part had been existed before
the tc_redirect_dtime test, still Fixes-tagging the patch when
the tc_redirect_dtime test was added since it is the only test
hitting it so far.
Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-1-martin.lau@linux.dev
|
|
If CONFIG_BPF_JIT_ALWAYS_ON is not set and bpf_jit_enable is 0, there
exist 6 failed tests.
[root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
[root@linux bpf]# echo 0 > /proc/sys/kernel/unprivileged_bpf_disabled
[root@linux bpf]# ./test_verifier | grep FAIL
#106/p inline simple bpf_loop call FAIL
#107/p don't inline bpf_loop call, flags non-zero FAIL
#108/p don't inline bpf_loop call, callback non-constant FAIL
#109/p bpf_loop_inline and a dead func FAIL
#110/p bpf_loop_inline stack locations for loop vars FAIL
#111/p inline bpf_loop call in a big program FAIL
Summary: 768 PASSED, 15 SKIPPED, 6 FAILED
The test log shows that callbacks are not allowed in non-JITed programs,
interpreter doesn't support them yet, thus these tests should be skipped
if jit is disabled.
Add an explicit flag F_NEEDS_JIT_ENABLED to those tests to mark that they
require JIT enabled in bpf_loop_inline.c, check the flag and jit_disabled
at the beginning of do_test_single() to handle this case.
With this patch:
[root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
[root@linux bpf]# echo 0 > /proc/sys/kernel/unprivileged_bpf_disabled
[root@linux bpf]# ./test_verifier | grep FAIL
Summary: 768 PASSED, 21 SKIPPED, 0 FAILED
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240123090351.2207-3-yangtiezhu@loongson.cn
|
|
Currently, is_jit_enabled() is only used in test_progs, move it into
testing_helpers so that it can be used in test_verifier. While at it,
remove the second argument "0" of open() as Hou Tao suggested.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20240123090351.2207-2-yangtiezhu@loongson.cn
|
|
We are missing a lot of config options from net selftests,
it seems:
tun/tap: CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP
fib_tests: CONFIG_NET_SCH_FQ_CODEL
l2tp: CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH
sctp-vrf: CONFIG_INET_DIAG
txtimestamp: CONFIG_NET_CLS_U32
vxlan_mdb: CONFIG_BRIDGE_VLAN_FILTERING
gre_gso: CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE
srv6_end_dt*_l3vpn: CONFIG_IPV6_SEG6_LWTUNNEL
ip_local_port_range: CONFIG_MPTCP
fib_test: CONFIG_NET_CLS_BASIC
rtnetlink: CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE
CONFIG_NET_IPGRE, CONFIG_BONDING
fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING
vxlan_mdb: CONFIG_NET_ACT_GACT
tls: CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305
psample: CONFIG_PSAMPLE
fcnal: CONFIG_TCP_MD5SIG
Try to add them in a semi-alphabetical order.
Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test")
Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask")
Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE")
Link: https://lore.kernel.org/r/20240122203528.672004-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new struct_ops type called bpf_testmod_ops within the bpf_testmod
module. When a struct_ops object is registered, the bpf_testmod module will
invoke test_2 from the module.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-15-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Adding fill_link_info test for perf event and testing we
get its values back through the bpf_link_info interface.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that we get cookies for perf_event probes, adding tests
for cookie for kprobe/uprobe/tracepoint.
The perf_event test needs to be added completely and is coming
in following change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding cookies check for kprobe_multi fill_link_info test,
plus tests for invalid values related to cookies.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some of the BPF selftests use the "p" constraint in inline assembly
snippets, for input operands for MOV (rN = rM) instructions.
This is mainly done via the __imm_ptr macro defined in
tools/testing/selftests/bpf/progs/bpf_misc.h:
#define __imm_ptr(name) [name]"p"(&name)
Example:
int consume_first_item_only(void *ctx)
{
struct bpf_iter_num iter;
asm volatile (
/* create iterator */
"r1 = %[iter];"
[...]
:
: __imm_ptr(iter)
: CLOBBERS);
[...]
}
The "p" constraint is a tricky one. It is documented in the GCC manual
section "Simple Constraints":
An operand that is a valid memory address is allowed. This is for
``load address'' and ``push address'' instructions.
p in the constraint must be accompanied by address_operand as the
predicate in the match_operand. This predicate interprets the mode
specified in the match_operand as the mode of the memory reference for
which the address would be valid.
There are two problems:
1. It is questionable whether that constraint was ever intended to be
used in inline assembly templates, because its behavior really
depends on compiler internals. A "memory address" is not the same
than a "memory operand" or a "memory reference" (constraint "m"), and
in fact its usage in the template above results in an error in both
x86_64-linux-gnu and bpf-unkonwn-none:
foo.c: In function ‘bar’:
foo.c:6:3: error: invalid 'asm': invalid expression as operand
6 | asm volatile ("r1 = %[jorl]" : : [jorl]"p"(&jorl));
| ^~~
I would assume the same happens with aarch64, riscv, and most/all
other targets in GCC, that do not accept operands of the form A + B
that are not wrapped either in a const or in a memory reference.
To avoid that error, the usage of the "p" constraint in internal GCC
instruction templates is supposed to be complemented by the 'a'
modifier, like in:
asm volatile ("r1 = %a[jorl]" : : [jorl]"p"(&jorl));
Internally documented (in GCC's final.cc) as:
%aN means expect operand N to be a memory address
(not a memory reference!) and print a reference
to that address.
That works because when the modifier 'a' is found, GCC prints an
"operand address", which is not the same than an "operand".
But...
2. Even if we used the internal 'a' modifier (we shouldn't) the 'rN =
rM' instruction really requires a register argument. In cases
involving automatics, like in the examples above, we easily end with:
bar:
#APP
r1 = r10-4
#NO_APP
In other cases we could conceibly also end with a 64-bit label that
may overflow the 32-bit immediate operand of `rN = imm32'
instructions:
r1 = foo
All of which is clearly wrong.
clang happens to do "the right thing" in the current usage of __imm_ptr
in the BPF tests, because even with -O2 it seems to "reload" the
fp-relative address of the automatic to a register like in:
bar:
r1 = r10
r1 += -4
#APP
r1 = r1
#NO_APP
Which is what GCC would generate with -O0. Whether this is by chance
or by design, the compiler shouln't be expected to do that reload
driven by the "p" constraint.
This patch changes the usage of the "p" constraint in the BPF
selftests macros to use the "r" constraint instead. If a register is
what is required, we should let the compiler know.
Previous discussion in bpf@vger:
https://lore.kernel.org/bpf/87h6p5ebpb.fsf@oracle.com/T/#ef0df83d6975c34dff20bf0dd52e078f5b8ca2767
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240123181309.19853-1-jose.marchesi@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
GCC emits a warning:
progs/test_tcpbpf_kern.c:60:9: error: ‘op’ is used uninitialized [-Werror=uninitialized]
when an uninialized op is used with a "+r" constraint. The + modifier
means a read-write operand, but that operand in the selftest is just
written to.
This patch changes the selftest to use a "=r" constraint. This
pacifies GCC.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: Yonghong Song <yhs@meta.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: david.faust@oracle.com
Cc: cupertino.miranda@oracle.com
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240123205624.14746-1-jose.marchesi@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
VLAs are not supported by either the BPF port of clang nor GCC. The
selftest test_xdp_dynptr.c contains the following code:
const size_t tcphdr_sz = sizeof(struct tcphdr);
const size_t udphdr_sz = sizeof(struct udphdr);
const size_t ethhdr_sz = sizeof(struct ethhdr);
const size_t iphdr_sz = sizeof(struct iphdr);
const size_t ipv6hdr_sz = sizeof(struct ipv6hdr);
[...]
static __always_inline int handle_ipv4(struct xdp_md *xdp, struct bpf_dynptr *xdp_ptr)
{
__u8 eth_buffer[ethhdr_sz + iphdr_sz + ethhdr_sz];
__u8 iph_buffer_tcp[iphdr_sz + tcphdr_sz];
__u8 iph_buffer_udp[iphdr_sz + udphdr_sz];
[...]
}
The eth_buffer, iph_buffer_tcp and other automatics are fixed size
only if the compiler optimizes away the constant global variables.
clang does this, but GCC does not, turning these automatics into
variable length arrays.
This patch removes the global variables and turns these values into
preprocessor constants. This makes the selftest to build properly
with GCC.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: Yonghong Song <yhs@meta.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: david.faust@oracle.com
Cc: cupertino.miranda@oracle.com
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240123201729.16173-1-jose.marchesi@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now arm64 bpf jit has enable bpf_jit_supports_ptr_xchg(), so enable
the test for arm64 as well.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240119102529.99581-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Check that bpf_object__load() successfully creates map_in_maps
with BPF_MAP_TYPE_PERF_EVENT_ARRAY values.
These changes cover fix in the previous patch
"libbpf: Apply map_set_def_max_entries() for inner_maps on creation".
A command line output is:
- w/o fix
$ sudo ./test_maps
libbpf: map 'mim_array_pe': failed to create inner map: -22
libbpf: map 'mim_array_pe': failed to create: Invalid argument(-22)
libbpf: failed to load object './test_map_in_map.bpf.o'
Failed to load test prog
- with fix
$ sudo ./test_maps
...
test_maps: OK, 0 SKIPPED
Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrey Grafin <conquistador@yandex-team.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240117130619.9403-2-conquistador@yandex-team.ru
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit adds a sample selftest to demonstrate how we can use
bpf_sk_assign_tcp_reqsk() as the backend of SYN Proxy.
The test creates IPv4/IPv6 x TCP connections and transfer messages
over them on lo with BPF tc prog attached.
The tc prog will process SYN and returns SYN+ACK with the following
ISN and TS. In a real use case, this part will be done by other
hosts.
MSB LSB
ISN: | 31 ... 8 | 7 6 | 5 | 4 | 3 2 1 0 |
| Hash_1 | MSS | ECN | SACK | WScale |
TS: | 31 ... 8 | 7 ... 0 |
| Random | Hash_2 |
WScale in SYN is reused in SYN+ACK.
The client returns ACK, and tc prog will recalculate ISN and TS
from ACK and validate SYN Cookie.
If it's valid, the prog calls kfunc to allocate a reqsk for skb and
configure the reqsk based on the argument created from SYN Cookie.
Later, the reqsk will be processed in cookie_v[46]_check() to create
a connection.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240115205514.68364-7-kuniyu@amazon.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It is possible for bpf_kfunc_call_test_release() to be called from
bpf_map_free_deferred() when bpf_testmod is already unloaded and
perf_test_stuct.cnt which it tries to decrease is no longer in memory.
This patch tries to fix the issue by waiting for all references to be
dropped in bpf_testmod_exit().
The issue can be triggered by running 'test_progs -t map_kptr' in 6.5,
but is obscured in 6.6 by d119357d07435 ("rcu-tasks: Treat only
synchronous grace periods urgently").
Fixes: 65eb006d85a2 ("bpf: Move kernel test kfuncs to bpf_testmod")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/82f55c0e-0ec8-4fe1-8d8c-b1de07558ad9@linux.dev
Link: https://lore.kernel.org/bpf/20240110085737.8895-1-asavkov@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Few minor improvements for bpf_cmp() macro:
. reduce number of args in __bpf_cmp()
. rename NOFLIP to UNLIKELY
. add a comment about 64-bit truncation in "i" constraint
. use "ri" constraint for sizeof(rhs) <= 4
. improve error message for bpf_cmp_likely()
Before:
progs/iters_task_vma.c:31:7: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
31 | if (bpf_cmp_likely(seen, <==, 1000))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../bpf/bpf_experimental.h:325:3: note: expanded from macro 'bpf_cmp_likely'
325 | ret;
| ^~~
progs/iters_task_vma.c:31:7: note: variable 'ret' is declared here
../bpf/bpf_experimental.h:310:3: note: expanded from macro 'bpf_cmp_likely'
310 | bool ret;
| ^
After:
progs/iters_task_vma.c:31:7: error: invalid operand for instruction
31 | if (bpf_cmp_likely(seen, <==, 1000))
| ^
../bpf/bpf_experimental.h:324:17: note: expanded from macro 'bpf_cmp_likely'
324 | asm volatile("r0 " #OP " invalid compare");
| ^
<inline asm>:1:5: note: instantiated into assembly here
1 | r0 <== invalid compare
| ^
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240112220134.71209-1-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a selftest with a 4 bytes BPF_ST of 0 where the store is not
8-byte aligned. The goal is to ensure that STACK_ZERO is properly
marked in stack slots and the STACK_ZERO value can propagate
properly during the load.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240110051355.2737232-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With patch set [1], precision backtracing supports register spill/fill
to/from the stack. The patch [2] allows initial imprecise register spill
with content 0. This is a common case for cpuv3 and lower for
initializing the stack variables with pattern
r1 = 0
*(u64 *)(r10 - 8) = r1
and the [2] has demonstrated good verification improvement.
For cpuv4, the initialization could be
*(u64 *)(r10 - 8) = 0
The current verifier marks the r10-8 contents with STACK_ZERO.
Similar to [2], let us permit the above insn to behave like
imprecise register spill which can reduce number of verified states.
The change is in function check_stack_write_fixed_off().
Before this patch, spilled zero will be marked as STACK_ZERO
which can provide precise values. In check_stack_write_var_off(),
STACK_ZERO will be maintained if writing a const zero
so later it can provide precise values if needed.
The above handling of '*(u64 *)(r10 - 8) = 0' as a spill
will have issues in check_stack_write_var_off() as the spill
will be converted to STACK_MISC and the precise value 0
is lost. To fix this issue, if the spill slots with const
zero and the BPF_ST write also with const zero, the spill slots
are preserved, which can later provide precise values
if needed. Without the change in check_stack_write_var_off(),
the test_verifier subtest 'BPF_ST_MEM stack imm zero, variable offset'
will fail.
I checked cpuv3 and cpuv4 with and without this patch with veristat.
There is no state change for cpuv3 since '*(u64 *)(r10 - 8) = 0'
is only generated with cpuv4.
For cpuv4:
$ ../veristat -C old.cpuv4.csv new.cpuv4.csv -e file,prog,insns,states -f 'insns_diff!=0'
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
------------------------------------------ ------------------- --------- --------- --------------- ---------- ---------- -------------
local_storage_bench.bpf.linked3.o get_local 228 168 -60 (-26.32%) 17 14 -3 (-17.65%)
pyperf600_bpf_loop.bpf.linked3.o on_event 6066 4889 -1177 (-19.40%) 403 321 -82 (-20.35%)
test_cls_redirect.bpf.linked3.o cls_redirect 35483 35387 -96 (-0.27%) 2179 2177 -2 (-0.09%)
test_l4lb_noinline.bpf.linked3.o balancer_ingress 4494 4522 +28 (+0.62%) 217 219 +2 (+0.92%)
test_l4lb_noinline_dynptr.bpf.linked3.o balancer_ingress 1432 1455 +23 (+1.61%) 92 94 +2 (+2.17%)
test_xdp_noinline.bpf.linked3.o balancer_ingress_v6 3462 3458 -4 (-0.12%) 216 216 +0 (+0.00%)
verifier_iterating_callbacks.bpf.linked3.o widening 52 41 -11 (-21.15%) 4 3 -1 (-25.00%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 12412 11719 -693 (-5.58%) 345 330 -15 (-4.35%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 12478 11794 -684 (-5.48%) 346 331 -15 (-4.34%)
test_l4lb_noinline and test_l4lb_noinline_dynptr has minor regression, but
pyperf600_bpf_loop and local_storage_bench gets pretty good improvement.
[1] https://lore.kernel.org/all/20231205184248.1502704-1-andrii@kernel.org/
[2] https://lore.kernel.org/all/20231205184248.1502704-9-andrii@kernel.org/
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240110051348.2737007-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The previous commit implemented assigning IDs to registers holding
scalars before spill. Add the test cases to check the new functionality.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-10-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, when a scalar bounded register is spilled to the stack, its
ID is preserved, but only if was already assigned, i.e. if this register
was MOVed before.
Assign an ID on spill if none is set, so that equal scalars could be
tracked if a register is spilled to the stack and filled into another
register.
One test is adjusted to reflect the change in register IDs.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-9-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When a range check is performed on a register that was 32-bit spilled to
the stack, the IDs of the two instances of the register are the same, so
the range should also be the same.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-6-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Verify that infinite loop detection logic separates states with
identical register states but different imprecise scalars spilled to
stack.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-4-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The u64_offset_to_skb_data test is supposed to make a 64-bit fill, but
instead makes a 16-bit one. Fix the test according to its intention and
update the comments accordingly (umax is no longer 0xffff). The 16-bit
fill is covered by u16_offset_to_skb_data.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-2-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
reviews.llvm.org was LLVM's Phabricator instances for code review. It
has been abandoned in favor of GitHub pull requests. While the majority
of links in the kernel sources still work because of the work Fangrui
has done turning the dynamic Phabricator instance into a static archive,
there are some issues with that work, so preemptively convert all the
links in the kernel sources to point to the commit on GitHub.
Most of the commits have the corresponding differential review link in
the commit message itself so there should not be any loss of fidelity in
the relevant information.
Additionally, fix a typo in the xdpwall.c print ("LLMV" -> "LLVM") while
in the area.
Link: https://discourse.llvm.org/t/update-on-github-pull-requests/71540/172
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240111-bpf-update-llvm-phabricator-links-v2-1-9a7ae976bd64@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Various tests specify extra testing prog_flags when loading BPF
programs, like BPF_F_TEST_RND_HI32, and more recently also
BPF_F_TEST_REG_INVARIANTS. While BPF_F_TEST_RND_HI32 is old enough to
not cause much problem on older kernels, BPF_F_TEST_REG_INVARIANTS is
very fresh and unconditionally specifying it causes selftests to fail on
even slightly outdated kernels.
This breaks libbpf CI test against 4.9 and 5.15 kernels, it can break
some local development (done outside of VM), etc.
To prevent this, and guard against similar problems in the future, do
runtime detection of supported "testing flags", and only provide those
that host kernel recognizes.
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240109231738.575844-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Seeing:
process_subtest:PASS:Can't alloc specs array 0 nsec
... in verbose successful test log is very confusing. Use smaller
identifier-like test tag to denote that we are asserting specs array
allocation success.
Now it's much less distracting:
process_subtest:PASS:specs_alloc 0 nsec
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105000909.2818934-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The test uses bpf_prog_get_info_by_fd() to obtain the xlated
instructions of the program first. Since these instructions have
already been rewritten by the verifier, the tests then checks whether
the rewritten instructions are as expected. And to ensure LLVM generates
code exactly as expected, use inline assembly and a naked function.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Both test_verifier and test_progs use get_xlated_program(), so moving
the helper into testing_helpers.h to reuse it.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to
fire somewhat randomly.
# # RUN so_incoming_cpu.before_reuseport.test3 ...
# # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0)
# # test3: Test terminated by assertion
# # FAIL so_incoming_cpu.before_reuseport.test3
# not ok 3 so_incoming_cpu.before_reuseport.test3
When the test failed, not-yet-accepted CLOSE_WAIT sockets received
SYN with a "challenging" SEQ number, which was sent from an unexpected
CPU that did not create the receiver.
The test basically does:
1. for each cpu:
1-1. create a server
1-2. set SO_INCOMING_CPU
2. for each cpu:
2-1. set cpu affinity
2-2. create some clients
2-3. let clients connect() to the server on the same cpu
2-4. close() clients
3. for each server:
3-1. accept() all child sockets
3-2. check if all children have the same SO_INCOMING_CPU with the server
The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse.
In a loop of 2., close() changed the client state to FIN_WAIT_2, and
the peer transitioned to CLOSE_WAIT.
In another loop of 2., connect() happened to select the same port of
the FIN_WAIT_2 socket, and it was reused as the default value of
net.ipv4.tcp_tw_reuse is 2.
As a result, the new client sent SYN to the CLOSE_WAIT socket from
a different CPU, and the receiver's sk_incoming_cpu was overwritten
with unexpected CPU ID.
Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket
responded with Challenge ACK. The new client properly returned RST
and effectively killed the CLOSE_WAIT socket.
This way, all clients were created successfully, but the error was
detected later by 3-2., ASSERT_EQ(cpu, i).
To avoid the failure, let's make sure that (i) the number of clients
is less than the number of available ports and (ii) such reuse never
happens.
Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240120031642.67014-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Prevent warnings of the form:
tools/testing/nvdimm/config_check.c:4:6: error: no previous prototype
for ‘check’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851fbf ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/nvdimm/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543984331.460832.1780246477583036191.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Prevent warnings of the form:
tools/testing/cxl/test/mock.c:44:6: error: no previous prototype for
‘__wrap_is_acpi_device_node’ [-Werror=missing-prototypes]
tools/testing/cxl/test/mock.c:63:5: error: no previous prototype for
‘__wrap_acpi_table_parse_cedt’ [-Werror=missing-prototypes]
tools/testing/cxl/test/mock.c:81:13: error: no previous prototype for
‘__wrap_acpi_evaluate_integer’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851fbf ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/cxl/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543983780.460832.10920261849128601697.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Indexing with mm_cid is incompatible with skipping disallowed cpumask,
because concurrency IDs are based on a virtual ID allocation which is
unrelated to the physical CPU mask.
These issues can be reproduced by running the rseq selftests under a
taskset which excludes CPU 0, e.g.
taskset -c 10-20 ./run_param_test.sh
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The test proves that a syscall can be livepatched. It is interesting
because syscalls are called a tricky way. Also the process gets
livepatched either when sleeping in the userspace or when entering
or leaving the kernel space.
The livepatch is a bit tricky:
1. The syscall function name is architecture specific. Also
ARCH_HAS_SYSCALL_WRAPPER must be taken in account.
2. The syscall must stay working the same way for other processes
on the system. It is solved by decrementing a counter only
for PIDs of the test processes. It means that the test processes
has to call the livepatched syscall at least once.
The test creates one userspace process per online cpu. The processes
are calling getpid in a busy loop. The intention is to create random
locations when the livepatch gets enabled. Nothing is guarantted.
The magic is in the randomness.
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The modules are being moved from lib/livepatch to
tools/testing/selftests/livepatch/test_modules.
This code moving will allow writing more complex tests, like for example an
userspace C code that will call a livepatched kernel function.
The modules are now built as out-of-tree
modules, but being part of the kernel source means they will be maintained.
Another advantage of the code moving is to be able to easily change,
debug and rebuild the tests by running make on the selftests/livepatch
directory, which is not currently possible since the modules on
lib/livepatch are build and installed using the "modules" target.
The current approach also keeps the ability to execute the tests manually
by executing the scripts inside selftests/livepatch directory, as it's
currently supported. If the modules are modified, they needed to be
rebuilt before running the scripts though.
The modules are built before running the selftests when using the
kselftest invocations:
make kselftest TARGETS=livepatch
or
make -C tools/testing/selftests/livepatch run_tests
Having the modules being built as out-of-modules requires changing the
currently used 'modprobe' by 'insmod' and adapt the test scripts that
check for the kernel message buffer.
Now it is possible to only compile the modules by running:
make -C tools/testing/selftests/livepatch/
This way the test modules and other test program can be built in order
to be packaged if so desired.
As there aren't any modules being built on lib/livepatch, remove the
TEST_LIVEPATCH Kconfig and it's references.
Note: "make gen_tar" packages the pre-built binaries into the tarball.
It means that it will store the test modules pre-built for
the kernel running on the build host.
Note that these modules need not binary compatible with
the kernel built from the same sources. But the same
is true for other packaged selftest binaries.
The entire kernel sources are needed for rebuilding
the selftests on another system.
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add TEST_GEN_MODS_DIR variable for kselftests. It can point to
a directory containing kernel modules that will be used by
selftest scripts.
The modules are built as external modules for the running kernel.
As a result they are always binary compatible and the same tests
can be used for older or newer kernels.
The build requires "kernel-devel" package to be installed.
For example, in the upstream sources, the rpm devel package
is produced by "make rpm-pkg"
The modules can be built independently by
make -C tools/testing/selftests/livepatch/
or they will be automatically built before running the tests via
make -C tools/testing/selftests/livepatch/ run_tests
Note that they are _not_ built when running the standalone
tests by calling, for example, ./test-state.sh.
Along with TEST_GEN_MODS_DIR, it was necessary to create a new install
rule. INSTALL_MODS_RULE is needed because INSTALL_SINGLE_RULE would
copy the entire TEST_GEN_MODS_DIR directory to the destination, even
the files created by Kbuild to compile the modules. The new install
rule copies only the .ko files, as we would expect the gen_tar to work.
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When walking directory trees, instead of looking for specific files and
running dirname to get the parent folder, traverse all folders and
ignore the ones not containing the desired files. This avoids the need
to call dirname inside the loop, which drastically decreases run time:
Running locally on a mt8192-asurada-spherion, which reports 160 test
cases, has gone from 5.5s to 2.9s, while running remotely with an
nfsroot has gone from 13.5s to 5.5s.
This change has a side-effect, which is that the root DT node now
also shows in the output, even though it isn't expected to bind to a
driver. However there shouldn't be a matching driver for the board
compatible, so the end result will be just an extra skipped test:
ok 1 / # SKIP
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/310391e8-fdf2-4c2f-a680-7744eb685177@sirena.org.uk
Fixes: 14571ab1ad21 ("kselftest: Add new test for detecting unprobed Devicetree devices")
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240122-dt-kselftest-dirname-perf-fix-v2-1-f1630532fd38@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Replace SYS_<syscall> with __NR_<syscall>. Using the __NR_<syscall>
notation, provided by UAPI, is useful to build tests on systems without
the SYS_<syscall> definitions.
Replace SYS_move_mount with __NR_move_mount
Similar changes: commit 87129ef13603 ("selftests/landlock: Make tests build with old libc")
Acked-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Hu.Yadi <hu.yadi@h3c.com>
Link: https://lore.kernel.org/r/20240111113229.10820-1-hu.yadi@h3c.com
Reviewed-by: Berlin <berlin@h3c.com>
Suggested-by: Jiao <jiaoxupo@h3c.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
One build issue comes up due to both mount.h included dev_in_maps.c
In file included from dev_in_maps.c:10:
/usr/include/sys/mount.h:35:3: error: expected identifier before numeric constant
35 | MS_RDONLY = 1, /* Mount read-only. */
| ^~~~~~~~~
In file included from dev_in_maps.c:13:
Remove one of them to solve conflict, another error comes up:
dev_in_maps.c:170:6: error: implicit declaration of function ‘mount’ [-Werror=implicit-function-declaration]
170 | if (mount(NULL, "/", NULL, MS_SLAVE | MS_REC, NULL) == -1) {
| ^~~~~
cc1: all warnings being treated as errors
and then , add sys_mount definition to solve it
After both above, dev_in_maps.c can be built correctly on my mache(gcc 10.2,glibc-2.32,kernel-5.10)
Signed-off-by: Hu Yadi <hu.yadi@h3c.com>
Link: https://lore.kernel.org/r/20240112074059.29673-1-hu.yadi@h3c.com
Acked-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
|
|
When tests are run by runner.sh, bond_options.sh gets killed before
it can complete:
make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding"
[...]
# timeout set to 120
# selftests: drivers/net/bonding: bond_options.sh
# TEST: prio (active-backup miimon primary_reselect 0) [ OK ]
# TEST: prio (active-backup miimon primary_reselect 1) [ OK ]
# TEST: prio (active-backup miimon primary_reselect 2) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ]
#
not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds
This test includes many sleep statements, at least some of which are
related to timers in the operation of the bonding driver itself. Increase
the test timeout to allow the test to complete.
I ran the test in slightly different VMs (including one without HW
virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and
13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s.
Fixes: 42a8d4aaea84 ("selftests: bonding: add bonding prio option test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240116104402.1203850a@kernel.org/#t
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The KVM RISC-V allows Zfa extension for Guest/VM so let us
add this extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zvfh[min] extensions for Guest/VM so let us
add these extensions to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zihintntl extension for Guest/VM so let us
add this extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zfh[min] extensions for Guest/VM so let us
add these extensions to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows vector crypto extensions for Guest/VM so let us
add these extensions to get-reg-list test. This includes extensions
Zvbb, Zvbc, Zvkb, Zvkg, Zvkned, Zvknha, Zvknhb, Zvksed, Zvksh, and Zvkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows scaler crypto extensions for Guest/VM so let us
add these extensions to get-reg-list test. This includes extensions
Zbkb, Zbkc, Zbkx, Zknd, Zkne, Zknh, Zkr, Zksed, Zksh, and Zkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
