Age | Commit message (Collapse) | Author |
|
The tramp_1 to tramp_40 ops is not set in the cfi_stubs in the
bpf_testmod_ops. It fails the struct_ops_multi_pages test after
retiring the unsupported_ops in the earlier patch.
This patch initializes them in a loop during the bpf_testmod_init().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240722183049.2254692-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fixes for HID-BPF after the merge with the bpf tree (Arnd Bergmann
and Benjamin Tissoires)
- some tool type fix for the Wacom driver (Tatsunosuke Tobita)
- a reorder of the sensor discovery to ensure the HID AMD SFH is
removed when no sensors are available (Basavaraj Natikar)
* tag 'for-linus-2024072901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: add test for attaching multiple time the same struct_ops
HID: bpf: prevent the same struct_ops to be attached more than once
selftests/hid: disable struct_ops auto-attach
selftests/hid: fix bpf_wq new API
HID: amd_sfh: Move sensor discovery before HID device initialization
hid: bpf: add BPF_JIT dependency
HID: wacom: more appropriate tool type categorization
HID: wacom: Modify pen IDs
|
|
When a timer signal is blocked and later unblocked then one signal should
be delivered with the correct number of overruns since the timer was queued.
Validate that behaviour.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
timer_gettime() must return the correct expiry time for interval timers
even when the timer is not armed, which is the case when a signal is
pending but blocked.
Works correctly for regular posix timers, but not for posix CPU timers.
Add a selftest to validate the fixes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Posix timers with a delivery mode of SIGEV_NONE deliver no signals but the
remaining expiry time must be readable via timer_gettime() for both one
shot and interval timers.
That's implemented correctly for regular posix timers but broken for posix
CPU timers.
Add a self test so the fixes can be verified.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Add a test case to validate correct behaviour vs. timer reprogramming and
deletion.
The handling of queued signals in case of timer reprogramming or deletion
is inconsistent at best.
POSIX does not really specify the behaviour for that:
- "The effect of disarming or resetting a timer with pending expiration
notifications is unspecified."
- "The disposition of pending signals for the deleted timer is
unspecified."
In both cases it is reasonable to expect that pending signals are
discarded. Especially in the reprogramming case it does not make sense to
account for previous overruns or to deliver a signal for a timer which
has been disarmed.
Add tests to validate that no unexpected signals are delivered. They fail
for now until the signal and posix timer code is updated.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Add a test case to validate correct behaviour vs. SIG_IGN.
The posix specification states:
"Setting a signal action to SIG_IGN for a signal that is pending shall
cause the pending signal to be discarded, whether or not it is blocked."
The kernel implements this in the signal handling code, but due to the way
how posix timers are handling SIG_IGN for periodic timers, the behaviour
after installing a real handler again is inconsistent and suprising.
The following sequence is expected to deliver a signal:
install_handler(SIG);
block_signal(SIG);
timer_create(...); <- Should send SIG
timer_settime(value=100ms, interval=100ms);
sleep(1); <- Timer expires and queues signal, timer is not rearmed
as that should happen in the signal delivery path
ignore_signal(SIG); <- Discards queued signal
install_handler(SIG); <- Restore handler, should rearm but does not
sleep(1);
unblock_signal(SIG); <- Should deliver one signal with overrun count
set in siginfo
This fails because nothing rearms the timer when the signal handler is
restored. Add a test for this case which fails until the signal and posix
timer code is fixed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
No point in returning to main() on fatal errors. Just exit right away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
|
|
Add some test cases to confirm the tailcall hierarchy issue has been fixed.
On x64, the selftests result is:
cd tools/testing/selftests/bpf && ./test_progs -t tailcalls
327/18 tailcalls/tailcall_bpf2bpf_hierarchy_1:OK
327/19 tailcalls/tailcall_bpf2bpf_hierarchy_fentry:OK
327/20 tailcalls/tailcall_bpf2bpf_hierarchy_fexit:OK
327/21 tailcalls/tailcall_bpf2bpf_hierarchy_fentry_fexit:OK
327/22 tailcalls/tailcall_bpf2bpf_hierarchy_fentry_entry:OK
327/23 tailcalls/tailcall_bpf2bpf_hierarchy_2:OK
327/24 tailcalls/tailcall_bpf2bpf_hierarchy_3:OK
327 tailcalls:OK
Summary: 1/24 PASSED, 0 SKIPPED, 0 FAILED
On arm64, the selftests result is:
cd tools/testing/selftests/bpf && ./test_progs -t tailcalls
327/18 tailcalls/tailcall_bpf2bpf_hierarchy_1:OK
327/19 tailcalls/tailcall_bpf2bpf_hierarchy_fentry:OK
327/20 tailcalls/tailcall_bpf2bpf_hierarchy_fexit:OK
327/21 tailcalls/tailcall_bpf2bpf_hierarchy_fentry_fexit:OK
327/22 tailcalls/tailcall_bpf2bpf_hierarchy_fentry_entry:OK
327/23 tailcalls/tailcall_bpf2bpf_hierarchy_2:OK
327/24 tailcalls/tailcall_bpf2bpf_hierarchy_3:OK
327 tailcalls:OK
Summary: 1/24 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20240714123902.32305-4-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
find_equal_scalars() is renamed to sync_linked_regs(),
this commit updates existing references in the selftests comments.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-5-eddyz87@gmail.com
|
|
Add a few test cases to verify precision tracking for scalars gaining
range because of sync_linked_regs():
- check what happens when more than 6 registers might gain range in
sync_linked_regs();
- check if precision is propagated correctly when operand of
conditional jump gained range in sync_linked_regs() and one of
linked registers is marked precise;
- check if precision is propagated correctly when operand of
conditional jump gained range in sync_linked_regs() and a
other-linked operand of the conditional jump is marked precise;
- add a minimized reproducer for precision tracking bug reported in [0];
- Check that mark_chain_precision() for one of the conditional jump
operands does not trigger equal scalars precision propagation.
[0] https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-4-eddyz87@gmail.com
|
|
Function mark_precise_scalar_ids() is superseded by
bt_sync_linked_regs() and equal scalars tracking in jump history.
mark_precise_scalar_ids() propagates precision over registers sharing
same ID on parent/child state boundaries, while jump history records
allow bt_sync_linked_regs() to propagate same information with
instruction level granularity, which is strictly more precise.
This commit removes mark_precise_scalar_ids() and updates test cases
in progs/verifier_scalar_ids to reflect new verifier behavior.
The tests are updated in the following manner:
- mark_precise_scalar_ids() propagated precision regardless of
presence of conditional jumps, while new jump history based logic
only kicks in when conditional jumps are present.
Hence test cases are augmented with conditional jumps to still
trigger precision propagation.
- As equal scalars tracking no longer relies on parent/child state
boundaries some test cases are no longer interesting,
such test cases are removed, namely:
- precision_same_state and precision_cross_state are superseded by
linked_regs_bpf_k;
- precision_same_state_broken_link and equal_scalars_broken_link
are superseded by linked_regs_broken_link.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-3-eddyz87@gmail.com
|
|
Use bpf_verifier_state->jmp_history to track which registers were
updated by find_equal_scalars() (renamed to collect_linked_regs())
when conditional jump was verified. Use recorded information in
backtrack_insn() to propagate precision.
E.g. for the following program:
while verifying instructions
1: r1 = r0 |
2: if r1 < 8 goto ... | push r0,r1 as linked registers in jmp_history
3: if r0 > 16 goto ... | push r0,r1 as linked registers in jmp_history
4: r2 = r10 |
5: r2 += r0 v mark_chain_precision(r0)
while doing mark_chain_precision(r0)
5: r2 += r0 | mark r0 precise
4: r2 = r10 |
3: if r0 > 16 goto ... | mark r0,r1 as precise
2: if r1 < 8 goto ... | mark r0,r1 as precise
1: r1 = r0 v
Technically, do this as follows:
- Use 10 bits to identify each register that gains range because of
sync_linked_regs():
- 3 bits for frame number;
- 6 bits for register or stack slot number;
- 1 bit to indicate if register is spilled.
- Use u64 as a vector of 6 such records + 4 bits for vector length.
- Augment struct bpf_jmp_history_entry with a field 'linked_regs'
representing such vector.
- When doing check_cond_jmp_op() remember up to 6 registers that
gain range because of sync_linked_regs() in such a vector.
- Don't propagate range information and reset IDs for registers that
don't fit in 6-value vector.
- Push a pair {instruction index, linked registers vector}
to bpf_verifier_state->jmp_history.
- When doing backtrack_insn() check if any of recorded linked
registers is currently marked precise, if so mark all linked
registers as precise.
This also requires fixes for two test_verifier tests:
- precise: test 1
- precise: test 2
Both tests contain the following instruction sequence:
19: (bf) r2 = r9 ; R2=scalar(id=3) R9=scalar(id=3)
20: (a5) if r2 < 0x8 goto pc+1 ; R2=scalar(id=3,umin=8)
21: (95) exit
22: (07) r2 += 1 ; R2_w=scalar(id=3+1,...)
23: (bf) r1 = r10 ; R1_w=fp0 R10=fp0
24: (07) r1 += -8 ; R1_w=fp-8
25: (b7) r3 = 0 ; R3_w=0
26: (85) call bpf_probe_read_kernel#113
The call to bpf_probe_read_kernel() at (26) forces r2 to be precise.
Previously, this forced all registers with same id to become precise
immediately when mark_chain_precision() is called.
After this change, the precision is propagated to registers sharing
same id only when 'if' instruction is backtracked.
Hence verification log for both tests is changed:
regs=r2,r9 -> regs=r2 for instructions 25..20.
Fixes: 904e6ddf4133 ("bpf: Use scalar ids in mark_chain_precision()")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-2-eddyz87@gmail.com
Closes: https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
|
|
Make use of -M compiler options when building .test.o objects to
generate .d files and avoid re-building all tests every time.
Previously, if a single test bpf program under selftests/bpf/progs/*.c
has changed, make would rebuild all the *.bpf.o, *.skel.h and *.test.o
objects, which is a lot of unnecessary work.
A typical dependency chain is:
progs/x.c -> x.bpf.o -> x.skel.h -> x.test.o -> trunner_binary
However for many tests it's not a 1:1 mapping by name, and so far
%.test.o have been simply dependent on all %.skel.h files, and
%.skel.h files on all %.bpf.o objects.
Avoid full rebuilds by instructing the compiler (via -MMD) to
produce *.d files with real dependencies, and appropriately including
them. Exploit make feature that rebuilds included makefiles if they
were changed by setting %.test.d as prerequisite for %.test.o files.
A couple of examples of compilation time speedup (after the first
clean build):
$ touch progs/verifier_and.c && time make -j8
Before: real 0m16.651s
After: real 0m2.245s
$ touch progs/read_vsyscall.c && time make -j8
Before: real 0m15.743s
After: real 0m1.575s
A drawback of this change is that now there is an overhead due to make
processing lots of .d files, which potentially may slow down unrelated
targets. However a time to make all from scratch hasn't changed
significantly:
$ make clean && time make -j8
Before: real 1m31.148s
After: real 1m30.309s
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/VJihUTnvtwEgv_mOnpfy7EgD9D2MPNoHO-MlANeLIzLJPGhDeyOuGKIYyKgk0O6KPjfM-MuhtvPwZcngN8WFqbTnTRyCSMc2aMZ1ODm1T_g=@pm.me
|
|
Similar to connect_to_addr() helper for connecting to a server with the
given sockaddr_storage type address, this patch adds a new helper named
connect_to_addr_str() for connecting to a server with the given string
type address "addr_str", together with its "family" and "port" as other
parameters of connect_to_addr_str().
In connect_to_addr_str(), the parameters "family", "addr_str" and "port"
are used to create a sockaddr_storage type address "addr" by invoking
make_sockaddr(). Then pass this "addr" together with "addrlen", "type"
and "opts" to connect_to_addr().
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/647e82170831558dbde132a7a3d86df660dba2c4.1721282219.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
The struct member "must_fail" of network_helper_opts() is only used in
cgroup_v1v2 tests, it makes sense to drop it from network_helper_opts.
Return value (fd) of connect_to_fd_opts() and the expect errno (EPERM)
can be checked in cgroup_v1v2.c directly, no need to check them in
connect_fd_to_addr() in network_helpers.c.
This also makes connect_fd_to_addr() function useless. It can be replaced
by connect().
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/3faf336019a9a48e2e8951f4cdebf19e3ac6e441.1721282219.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
The "type" parameter of connect_to_fd_opts() is redundant of "server_fd".
Since the "type" can be obtained inside by invoking getsockopt(SO_TYPE),
without passing it in as a parameter.
This patch drops the "type" parameter of connect_to_fd_opts() and updates
its callers.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/50d8ce7ab7ab0c0f4d211fc7cc4ebe3d3f63424c.1721282219.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
In main_loop_s function, when the open(cfg_input, O_RDONLY) function is
run, the last fd is not closed if the "--cfg_repeat > 0" branch is not
taken.
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pm_nl_check_endpoint() currently calls an not existing helper
to mark the test as failed. Fix the wrong call.
Fixes: 03668c65d153 ("selftests: mptcp: join: rework detailed report")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Delete and re-create a signal endpoint and ensure that the PM
actually deletes and re-create the subflow.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We had a handful of bugs relating to key being either all 0
or just reported incorrectly as all 0. Check for this in
the tests.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even if a vgem device is configured in, we will skip the import_vgem_fd()
test almost every time.
TAP version 13
1..11
# Testing heap: system
# =======================================
# Testing allocation and importing:
ok 1 # SKIP Could not open vgem -1
The problem is that we use the DRM_IOCTL_VERSION ioctl to query the driver
version information but leave the name field a non-null-terminated string.
Terminate it properly to actually test against the vgem device.
While at it, let's check the length of the driver name is exactly 4 bytes
and return early otherwise (in case there is a name like "vgemfoo" that
gets converted to "vgem\0" unexpectedly).
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729024604.2046-1-yuzenghui@huawei.com
|
|
Fix compile error introduced by commit d27c34a73514 ("KVM: riscv:
selftests: Add some Zc* extensions to get-reg-list test"). These
4 lines should be end with ";".
Fixes: d27c34a73514 ("KVM: riscv: selftests: Add some Zc* extensions to get-reg-list test")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20240726084931.28924-5-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add CFcommon.arch for arch-specific Kconfig options.
In accordance with [1], [2] and [3], move the x86-specific kernel option
CONFIG_HYPERVISOR_GUEST to CFcommon.i686 and CFcommon.x86_64, and also
move the x86/PowerPC CONFIG_KVM_GUEST Kconfig option to CFcommon.i686,
CFcommon.x86_64, and CFcommon.ppc64le.
The "arch" in CFcommon.arch is taken from the "uname -m" command.
[1] https://lore.kernel.org/all/20240427005626.1365935-1-zhouzhouyi@gmail.com/
[2] https://lore.kernel.org/all/059d36ce-6453-42be-a31e-895abd35d590@paulmck-laptop/
[3] https://lore.kernel.org/all/ZnBkHosMDhsh4H8g@J2N7QTR9R3/
Tested in x86_64 and PPC VM of Open Source Lab of Oregon State University.
Fixes: a6fda6dab93c ("rcutorture: Tweak kvm options")
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Jann Horn reported a sandbox bypass for Landlock. This includes the
fix and new tests. This should be backported"
* tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add cred_transfer test
landlock: Don't lose track of restrictions on cred_transfer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"11 hotfixes, 7 of which are cc:stable. 7 are MM, 4 are other"
* tag 'mm-hotfixes-stable-2024-07-26-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
selftests/mm: skip test for non-LPA2 and non-LVA systems
mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()
mm: memcg: add cacheline padding after lruvec in mem_cgroup_per_node
alloc_tag: outline and export free_reserved_page()
decompress_bunzip2: fix rare decompression failure
mm/huge_memory: avoid PMD-size page cache if needed
mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines
mm: fix old/young bit handling in the faulting path
dt-bindings: arm: update James Clark's email address
MAINTAINERS: mailmap: update James Clark's email address
|
|
Post my improvement of the test in e4a4ba415419 ("selftests/mm:
va_high_addr_switch: dynamically initialize testcases to enable LPA2
testing"):
The test begins to fail on 4k and 16k pages, on non-LPA2 systems. To
reduce noise in the CI systems, let us skip the test when higher address
space is not implemented.
Link: https://lkml.kernel.org/r/20240718052504.356517-1-dev.jain@arm.com
Fixes: e4a4ba415419 ("selftests/mm: va_high_addr_switch: dynamically initialize testcases to enable LPA2 testing")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Test adds several perf counters from msr, cstate_core and cstate_pkg
groups and checks if the columns for those counters show up.
The test skips the counters that are not present. It is not an error,
but the test may not be as exhaustive.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The test requests BICs that are dependent on SMI, APERF and MPERF
counters and checks if the columns show up in the output and the
turbostat doesn't crash. Read the counters in both --no-msr
and --no-perf mode.
The test skips counters that are not present or user does not have
permissions to read. It is not an error, but the test may not be as
exhaustive.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The usual summary below, but the main fix is for the fast GUP lockless
page-table walk when we have a combination of compile-time and
run-time folding of the p4d and the pud respectively.
- Remove some redundant Kconfig conditionals
- Fix string output in ptrace selftest
- Fix fast GUP crashes in some page-table configurations
- Remove obsolete linker option when building the vDSO
- Fix some sysreg field definitions for the GIC"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Fix lockless walks with static and dynamic page-table folding
arm64/sysreg: Correct the values for GICv4.1
arm64/vdso: Remove --hash-style=sysv
kselftest: missing arg in ptrace.c
arm64/Kconfig: Remove redundant 'if HAVE_FUNCTION_GRAPH_TRACER'
arm64: remove redundant 'if HAVE_ARCH_KASAN' in Kconfig
|
|
Pull bitmap updates from Yury Norov:
"Random fixes"
* tag 'bitmap-6.11-rc1' of https://github.com:/norov/linux:
riscv: Remove unnecessary int cast in variable_fls()
radix tree test suite: put definition of bitmap_clear() into lib/bitmap.c
bitops: Add a comment explaining the double underscore macros
lib: bitmap: add missing MODULE_DESCRIPTION() macros
cpumask: introduce assign_cpu() macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
A lot of networking people were at a conference last week, busy
catching COVID, so relatively short PR.
Current release - regressions:
- tcp: process the 3rd ACK with sk_socket for TFO and MPTCP
Current release - new code bugs:
- l2tp: protect session IDR and tunnel session list with one lock,
make sure the state is coherent to avoid a warning
- eth: bnxt_en: update xdp_rxq_info in queue restart logic
- eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field
Previous releases - regressions:
- xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len,
the field reuses previously un-validated pad
Previous releases - always broken:
- tap/tun: drop short frames to prevent crashes later in the stack
- eth: ice: add a per-VF limit on number of FDIR filters
- af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash"
* tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
tun: add missing verification for short frame
tap: add missing verification for short frame
mISDN: Fix a use after free in hfcmulti_tx()
gve: Fix an edge case for TSO skb validity check
bnxt_en: update xdp_rxq_info in queue restart logic
tcp: process the 3rd ACK with sk_socket for TFO/MPTCP
selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
bpf: Fix a segment issue when downgrading gso_size
net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling
MAINTAINERS: make Breno the netconsole maintainer
MAINTAINERS: Update bonding entry
net: nexthop: Initialize all fields in dumped nexthops
net: stmmac: Correct byte order of perfect_match
selftests: forwarding: skip if kernel not support setting bridge fdb learning limit
tipc: Return non-zero value from tipc_udp_addr2str() on error
netfilter: nft_set_pipapo_avx2: disable softinterrupts
ice: Fix recipe read procedure
ice: Add a per-VF limit on number of FDIR filters
net: bonding: correctly annotate RCU in bond_should_notify_peers()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-25
We've added 14 non-merge commits during the last 8 day(s) which contain
a total of 19 files changed, 177 insertions(+), 70 deletions(-).
The main changes are:
1) Fix af_unix to disable MSG_OOB handling for sockets in BPF sockmap and
BPF sockhash. Also add test coverage for this case, from Michal Luczaj.
2) Fix a segmentation issue when downgrading gso_size in the BPF helper
bpf_skb_adjust_room(), from Fred Li.
3) Fix a compiler warning in resolve_btfids due to a missing type cast,
from Liwei Song.
4) Fix stack allocation for arm64 to align the stack pointer at a 16 byte
boundary in the fexit_sleep BPF selftest, from Puranjay Mohan.
5) Fix a xsk regression to require a flag when actuating tx_metadata_len,
from Stanislav Fomichev.
6) Fix function prototype BTF dumping in libbpf for prototypes that have
no input arguments, from Andrii Nakryiko.
7) Fix stacktrace symbol resolution in perf script for BPF programs
containing subprograms, from Hou Tao.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
bpf: Fix a segment issue when downgrading gso_size
tools/resolve_btfids: Fix comparison of distinct pointer types warning in resolve_btfids
bpf, events: Use prog to emit ksymbol event for main program
selftests/bpf: Test sockmap redirect for AF_UNIX MSG_OOB
selftests/bpf: Parametrize AF_UNIX redir functions to accept send() flags
selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected()
af_unix: Disable MSG_OOB handling for sockets in sockmap/sockhash
bpftool: Fix typo in usage help
libbpf: Fix no-args func prototype BTF dumping syntax
MAINTAINERS: Update powerpc BPF JIT maintainers
MAINTAINERS: Update email address of Naveen
selftests/bpf: fexit_sleep: Fix stack allocation for arm64
====================
Link: https://patch.msgid.link/20240725114312.32197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This flag is now required to use tx_metadata_len.
Fixes: 40808a237d9c ("selftests/bpf: Add TX side to xdp_metadata")
Reported-by: Julian Schindel <mail@arctic-alpaca.de>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240713015253.121248-3-sdf@fomichev.me
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- The new 64bit mount ids start after the old mount id, i.e., at the
first non-32 bit value. However, we started counting one id too
late and thus lost 4294967296 as the first valid id. Fix that.
- Update a few comments on some vfs_*() creation helpers.
- Move copying of the xattr name out from the locks required to start
a filesystem write.
- Extend the filelock lock UAF fix to the compat code as well.
- Now that we added the ability to look up an inode under RCU it's
possible that lockless hash lookup can find and lock an inode after
it gets I_FREEING set. It then waits until inode teardown in
evict() is finished.
The flag however is still set after evict() has woken up all
waiters. If the inode lock is taken late enough on the waiting side
after hash removal and wakeup happened the waiting thread will
never be woken.
Before RCU based lookup this was synchronized via the
inode_hash_lock. But since unhashing requires the inode lock as
well we can check whether the inode is unhashed while holding inode
lock even without holding inode_hash_lock.
pidfd:
- The nsproxy structure contains nearly all of the namespaces
associated with a task. When a namespace type isn't supported
nsproxy might contain a NULL pointer or always point to the initial
namespace type. The logic isn't consistent. So when deriving
namespace fds we need to ensure that the namespace type is
supported.
First, so that we don't risk dereferncing NULL pointers. The
correct bigger fix would be to change all namespaces to always set
a valid namespace pointer in struct nsproxy independent of whether
or not it is compiled in. But that requires quite a few changes.
Second, so that we don't allow deriving namespace fds when the
namespace type doesn't exist and thus when they couldn't also be
derived via /proc/self/ns/.
- Add missing selftests for the new pidfd ioctls to derive namespace
fds. This simply extends the already existing testsuite.
netfs:
- Fix debug logging and fix kconfig variable name so it actually
works.
- Fix writeback that goes both to the server and cache. The streams
are only activated once a subreq is added. When a server write
happens the subreq doesn't need to have finished by the time the
cache write is started. If the server write has already finished by
the time the cache write is about to start the cache write will
operate on a folio that might already have been reused. Fix this by
preactivating the cache write.
- Limit cachefiles subreq size for cache writes to MAX_RW_COUNT"
* tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
inode: clarify what's locked
vfs: Fix potential circular locking through setxattr() and removexattr()
filelock: Fix fcntl/close race recovery compat path
fs: use all available ids
cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT
netfs: Fix writeback that needs to go to both server and cache
pidfs: add selftests for new namespace ioctls
pidfs: handle kernels without namespaces cleanly
pidfs: when time ns disabled add check for ioctl
vfs: correct the comments of vfs_*() helpers
vfs: handle __wait_on_freeing_inode() and evict() race
netfs: Rename CONFIG_FSCACHE_DEBUG to CONFIG_NETFS_DEBUG
netfs: Revert "netfs: Switch debug logging to pr_debug()"
|
|
Turns out that we would en up in a bad state if we attempt to attach
twice the same HID-BPF struct_ops, so have a test for it.
Link: https://patch.msgid.link/20240723-fix-6-11-bpf-v1-4-b9d770346784@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Since commit 08ac454e258e ("libbpf: Auto-attach struct_ops BPF maps in
BPF skeleton"), libbpf automatically calls bpf_map__attach_struct_ops()
on every struct_ops it sees in the bpf object. The problem is that
our test bpf object has many of them but only one should be manually
loaded at a time, or we end up locking the syscall.
Link: https://patch.msgid.link/20240723-fix-6-11-bpf-v1-2-b9d770346784@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Since commit f56f4d541eab ("bpf: helpers: fix bpf_wq_set_callback_impl
signature"), the API for bpf_wq changed a bit.
We need to update the selftests/hid code to reflect that or the
bpf program will not load.
Link: https://patch.msgid.link/20240723-fix-6-11-bpf-v1-1-b9d770346784@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Check that keyctl(KEYCTL_SESSION_TO_PARENT) preserves the parent's
restrictions.
Fixes: e1199815b47b ("selftests/landlock: Add user space tests")
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240724.Ood5aige9she@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
learning limit
If the testing kernel doesn't support setting fdb_max_learned or show
fdb_n_learned, just skip it. Or we will get errors like
./bridge_fdb_learning_limit.sh: line 218: [: null: integer expression expected
./bridge_fdb_learning_limit.sh: line 225: [: null: integer expression expected
Fixes: 6f84090333bb ("selftests: forwarding: bridge_fdb_learning_limit: Add a new selftest")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Johannes Nixdorf <jnixdorf-oss@avm.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add selftests to verify that deriving namespace file descriptors from
pidfd file descriptors works correctly.
Link: https://lore.kernel.org/r/20240722-work-pidfs-69dbea91edab@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- show patch->replace flag in sysfs
- add or improve few selftests
* tag 'livepatching-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Replace snprintf() with sysfs_emit()
selftests/livepatch: Add selftests for "replace" sysfs attribute
livepatch: Add "replace" sysfs attribute
selftests: livepatch: Test atomic replace against multiple modules
selftests/livepatch: define max test-syscall processes
|
|
|
|
The string passed to ksft_test_result_skip is missing the `type_name`
Signed-off-by: Remington Brasga <rbrasga@uci.edu>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240712231730.2794-1-rbrasga@uci.edu
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|