summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2021-09-27selftests: drivers/dma-buf: Fix implicit declaration warnsShuah Khan
udmabuf has the following implicit declaration warns: udmabuf.c:30:10: warning: implicit declaration of function 'open'; udmabuf.c:42:8: warning: implicit declaration of function 'fcntl' These are caused due to not including fcntl.h and including just linux/fcntl.h. Fix it to include fcntl.h which will bring in the linux/fcntl.h. In addition, define __EXPORTED_HEADERS__ to bring in F_ADD_SEALS and F_SEAL_SHRINK defines and fix the following error that show up when just fcntl.h is included. udmabuf.c:45:21: error: 'F_ADD_SEALS' undeclared 45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); | ^~~~~~~~~~~ udmabuf.c:45:34: error: 'F_SEAL_SHRINK' undeclared 45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); | ^~~~~~~~~~~~~ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-27selftests: net: fib_nexthops: Wait before checking reported idle timePetr Machata
The purpose of this test is to verify that after a short activity passes, the reported time is reasonable: not zero (which could be reported by mistake), and not something outrageous (which would be indicative of an issue in used units). However, the idle time is reported in units of clock_t, or hundredths of second. If the initial sequence of commands is very quick, it is possible that the idle time is reported as just flat-out zero. When this test was recently enabled in our nightly regression, we started seeing spurious failures for exactly this reason. Therefore buffer the delay leading up to the test with a sleep, to make sure there is no legitimate way of reporting 0. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-26bpf: selftest: Add verifier tests for <8-byte scalar spill and refillMartin KaFai Lau
This patch adds a few verifier tests for <8-byte spill and refill. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210922004953.627183-1-kafai@fb.com
2021-09-26bpf: selftest: A bpf prog that has a 32bit scalar spillMartin KaFai Lau
It is a simplified example that can trigger a 32bit scalar spill. The const scalar is refilled and added to a skb->data later. Since the reg state of the 32bit scalar spill is not saved now, adding the refilled reg to skb->data and then comparing it with skb->data_end cannot verify the skb->data access. With the earlier verifier patch and the llvm patch [1]. The verifier can correctly verify the bpf prog. Here is the snippet of the verifier log that leads to verifier conclusion that the packet data is unsafe to read. The log is from the kerne without the previous verifier patch to save the <8-byte scalar spill. 67: R0=inv1 R1=inv17 R2=invP2 R3=inv1 R4=pkt(id=0,off=68,r=102,imm=0) R5=inv102 R6=pkt(id=0,off=62,r=102,imm=0) R7=pkt(id=0,off=0,r=102,imm=0) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 67: (63) *(u32 *)(r10 -12) = r5 68: R0=inv1 R1=inv17 R2=invP2 R3=inv1 R4=pkt(id=0,off=68,r=102,imm=0) R5=inv102 R6=pkt(id=0,off=62,r=102,imm=0) R7=pkt(id=0,off=0,r=102,imm=0) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 fp-16=mmmm???? ... 101: R0_w=map_value_or_null(id=2,off=0,ks=16,vs=1,imm=0) R6_w=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=0,off=0,r=102,imm=0) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 fp-16=mmmmmmmm 101: (61) r1 = *(u32 *)(r10 -12) 102: R0_w=map_value_or_null(id=2,off=0,ks=16,vs=1,imm=0) R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6_w=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=0,off=0,r=102,imm=0) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 fp-16=mmmmmmmm 102: (bc) w1 = w1 103: R0_w=map_value_or_null(id=2,off=0,ks=16,vs=1,imm=0) R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6_w=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=0,off=0,r=102,imm=0) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 fp-16=mmmmmmmm 103: (0f) r7 += r1 last_idx 103 first_idx 67 regs=2 stack=0 before 102: (bc) w1 = w1 regs=2 stack=0 before 101: (61) r1 = *(u32 *)(r10 -12) 104: R0_w=map_value_or_null(id=2,off=0,ks=16,vs=1,imm=0) R1_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6_w=pkt(id=0,off=70,r=102,imm=0) R7_w=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9=inv17 R10=fp0 fp-16=mmmmmmmm ... 127: R0_w=inv1 R1=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9_w=invP17 R10=fp0 fp-16=mmmmmmmm 127: (bf) r1 = r7 128: R0_w=inv1 R1_w=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9_w=invP17 R10=fp0 fp-16=mmmmmmmm 128: (07) r1 += 8 129: R0_w=inv1 R1_w=pkt(id=3,off=8,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9_w=invP17 R10=fp0 fp-16=mmmmmmmm 129: (b4) w0 = 1 130: R0=inv1 R1=pkt(id=3,off=8,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9=invP17 R10=fp0 fp-16=mmmmmmmm 130: (2d) if r1 > r8 goto pc-66 R0=inv1 R1=pkt(id=3,off=8,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9=invP17 R10=fp0 fp-16=mmmmmmmm 131: R0=inv1 R1=pkt(id=3,off=8,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R6=pkt(id=0,off=70,r=102,imm=0) R7=pkt(id=3,off=0,r=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8=pkt_end(id=0,off=0,imm=0) R9=invP17 R10=fp0 fp-16=mmmmmmmm 131: (69) r6 = *(u16 *)(r7 +0) invalid access to packet, off=0 size=2, R7(id=3,off=0,r=0) R7 offset is outside of the packet [1]: https://reviews.llvm.org/D109073 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210922004947.626286-1-kafai@fb.com
2021-09-25Merge tag 'linux-kselftest-fixes-5.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - fix to Kselftest common framework header install to run before other targets for it work correctly in parallel build case. - fixes to kvm test to not ignore fscanf() returns which could result in inconsistent test behavior and failures. * tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: kvm: fix get_run_delay() ignoring fscanf() return warn selftests: kvm: move get_run_delay() into lib/test_util selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn selftests: be sure to make khdr before other targets
2021-09-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net 1) ipset limits the max allocatable memory via kvmalloc() to MAX_INT, from Jozsef Kadlecsik. 2) Check ip_vs_conn_tab_bits value to be in the range specified in Kconfig, from Andrea Claudi. 3) Initialize fragment offset in ip6tables, from Jeremy Sowden. 4) Make conntrack hash chain length random, from Florian Westphal. 5) Add zone ID to conntrack and NAT hashtuple again, also from Florian. 6) Add selftests for bidirectional zone support and colliding tuples, from Florian Westphal. 7) Unlink table before synchronize_rcu when cleaning tables with owner, from Florian. 8) ipset limits the max allocatable memory via kvmalloc() to MAX_INT. 9) Release conntrack entries via workqueue in masquerade, from Florian. 10) Fix bogus net_init in iptables raw table definition, also from Florian. 11) Work around missing softdep in log extensions, from Florian Westphal. 12) Serialize hash resizes and cleanups with mutex, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: conntrack: serialize hash resizes and cleanups netfilter: log: work around missing softdep backend module netfilter: iptable_raw: drop bogus net_init annotation netfilter: nf_nat_masquerade: defer conntrack walk to work queue netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic netfilter: nf_tables: Fix oversized kvmalloc() calls netfilter: nf_tables: unlink table before deleting it selftests: netfilter: add zone stress test with colliding tuples selftests: netfilter: add selftest for directional zone support netfilter: nat: include zone id in nat table hash again netfilter: conntrack: include zone id in tuple hash again netfilter: conntrack: make max chain length random netfilter: ip6_tables: zero-initialize fragment offset ipvs: check that ip_vs_conn_tab_bits is between 8 and 20 netfilter: ipset: Fix oversized kvmalloc() calls ==================== Link: https://lore.kernel.org/r/20210924221113.348767-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-24selftests/bpf: Fix btf_dump __int128 test failure with clang build kernelYonghong Song
With clang build kernel (adding LLVM=1 to kernel and selftests/bpf build command line), I hit the following test failure: $ ./test_progs -t btf_dump ... btf_dump_data:PASS:ensure expected/actual match 0 nsec btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0 btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0 test_btf_dump_int_data:FAIL:dump __int128 unexpected error: -2 (errno 2) #15/9 btf_dump/btf_dump: int_data:FAIL Further analysis showed gcc build kernel has type "__int128" in dwarf/BTF and it doesn't exist in clang build kernel. Code searching for kernel code found the following: arch/s390/include/asm/types.h: unsigned __int128 pair; crypto/ecc.c: unsigned __int128 m = (unsigned __int128)left * right; include/linux/math64.h: return (u64)(((unsigned __int128)a * mul) >> shift); include/linux/math64.h: return (u64)(((unsigned __int128)a * mul) >> shift); lib/ubsan.h:typedef __int128 s_max; lib/ubsan.h:typedef unsigned __int128 u_max; In my case, CONFIG_UBSAN is not enabled. Even if we only have "unsigned __int128" in the code, somehow gcc still put "__int128" in dwarf while clang didn't. Hence current test works fine for gcc but not for clang. Enabling CONFIG_UBSAN is an option to provide __int128 type into dwarf reliably for both gcc and clang, but not everybody enables CONFIG_UBSAN in their kernel build. So the best choice is to use "unsigned __int128" type which is available in both clang and gcc build kernels. But clang and gcc dwarf encoded names for "unsigned __int128" are different: [$ ~] cat t.c unsigned __int128 a; [$ ~] gcc -g -c t.c && llvm-dwarfdump t.o | grep __int128 DW_AT_type (0x00000031 "__int128 unsigned") DW_AT_name ("__int128 unsigned") [$ ~] clang -g -c t.c && llvm-dwarfdump t.o | grep __int128 DW_AT_type (0x00000033 "unsigned __int128") DW_AT_name ("unsigned __int128") The test change in this patch tries to test type name before doing actual test. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20210924025856.2192476-1-yhs@fb.com
2021-09-24Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - It turns out that the optimised string routines merged in 5.14 are not safe with in-kernel MTE (KASAN_HW_TAGS) because of reading beyond the end of a string (strcmp, strncmp). Such reading may go across a 16 byte tag granule and cause a tag check fault. When KASAN_HW_TAGS is enabled, use the generic strcmp/strncmp C implementation. - An errata workaround for ThunderX relied on the CPU capabilities being enabled in a specific order. This disappeared with the automatic generation of the cpucaps.h file (sorted alphabetically). Fix it by checking the current CPU only rather than the system-wide capability. - Add system_supports_mte() checks on the kernel entry/exit path and thread switching to avoid unnecessary barriers and function calls on systems where MTE is not supported. - kselftests: skip arm64 tests if the required features are missing. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Restore forced disabling of KPTI on ThunderX kselftest/arm64: signal: Skip tests if required features are missing arm64: Mitigate MTE issues with str{n}cmp() arm64: add MTE supported check to thread switching and syscall entry/exit
2021-09-24selftests: KVM: Explicitly use movq to read xmm registersOliver Upton
Compiling the KVM selftests with clang emits the following warning: >> include/x86_64/processor.h:297:25: error: variable 'xmm0' is uninitialized when used here [-Werror,-Wuninitialized] >> return (unsigned long)xmm0; where xmm0 is accessed via an uninitialized register variable. Indeed, this is a misuse of register variables, which really should only be used for specifying register constraints on variables passed to inline assembly. Rather than attempting to read xmm registers via register variables, just explicitly perform the movq from the desired xmm register. Fixes: 783e9e51266e ("kvm: selftests: add API testing infrastructure") Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20210924005147.1122357-1-oupton@google.com> Reviewed-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-24selftests: KVM: Call ucall_init when setting up in rseq_testOliver Upton
While x86 does not require any additional setup to use the ucall infrastructure, arm64 needs to set up the MMIO address used to signal a ucall to userspace. rseq_test does not initialize the MMIO address, resulting in the test spinning indefinitely. Fix the issue by calling ucall_init() during setup. Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20210923220033.4172362-1-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-23Merge tag 'for-linus-rseq' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull rseq fixes from Paolo Bonzini: "A fix for a bug with restartable sequences and KVM. KVM's handling of TIF_NOTIFY_RESUME, e.g. for task migration, clears the flag without informing rseq and leads to stale data in userspace's rseq struct" * tag 'for-linus-rseq' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Remove __NR_userfaultfd syscall fallback KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs tools: Move x86 syscall number fallbacks to .../uapi/ entry: rseq: Call rseq_handle_notify_resume() in tracehook_notify_resume() KVM: rseq: Update rseq when processing NOTIFY_RESUME on xfer to KVM guest
2021-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/mptcp/protocol.c 977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext") efe686ffce01 ("mptcp: ensure tx skbs always have the MPTCP ext") same patch merged in both trees, keep net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-23Merge tag 'net-5.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports() Previous releases - regressions: - introduce a shutdown method to mdio device drivers, and make DSA switch drivers compatible with masters disappearing on shutdown; preventing infinite reference wait - fix issues in mdiobus users related to ->shutdown vs ->remove - virtio-net: fix pages leaking when building skb in big mode - xen-netback: correct success/error reporting for the SKB-with-fraglist - dsa: tear down devlink port regions when tearing down the devlink port on error - nexthop: fix division by zero while replacing a resilient group - hns3: check queue, vf, vlan ids range before using Previous releases - always broken: - napi: fix race against netpoll causing NAPI getting stuck - mlx4_en: ensure link operstate is updated even if link comes up before netdev registration - bnxt_en: fix TX timeout when TX ring size is set to the smallest - enetc: fix illegal access when reading affinity_hint; prevent oops on sysfs access - mtk_eth_soc: avoid creating duplicate offload entries Misc: - core: correct the sock::sk_lock.owned lockdep annotations" * tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) atlantic: Fix issue in the pm resume flow. net/mlx4_en: Don't allow aRFS for encapsulated packets net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries nfc: st-nci: Add SPI ID matching DT compatible MAINTAINERS: remove Guvenc Gulce as net/smc maintainer nexthop: Fix memory leaks in nexthop notification chain listeners mptcp: ensure tx skbs always have the MPTCP ext qed: rdma - don't wait for resources under hw error recovery flow s390/qeth: fix deadlock during failing recovery s390/qeth: Fix deadlock in remove_discipline s390/qeth: fix NULL deref in qeth_clear_working_pool_list() net: dsa: realtek: register the MDIO bus under devres net: dsa: don't allocate the slave_mii_bus using devres Doc: networking: Fox a typo in ice.rst net: dsa: fix dsa_tree_setup error path net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work net/smc: add missing error check in smc_clc_prfx_set() net: hns3: fix a return value error in hclge_get_reset_status() net: hns3: check vlan id before using it ...
2021-09-23KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0Maxim Levitsky
Test that if: * L1 disables virtual interrupt masking, and INTR intercept. * L1 setups a virtual interrupt to be injected to L2 and enters L2 with interrupts disabled, thus the virtual interrupt is pending. * Now an external interrupt arrives in L1 and since L1 doesn't intercept it, it should be delivered to L2 when it enables interrupts. to do this L0 (abuses) V_IRQ to setup an interrupt window, and returns to L2. * L2 enables interrupts. This should trigger the interrupt window, injection of the external interrupt and delivery of the virtual interrupt that can now be done. * Test that now L2 gets those interrupts. This is the test that demonstrates the issue that was fixed in the previous patch. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210914154825.104886-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: selftests: Create a separate dirty bitmap per slotDavid Matlack
The calculation to get the per-slot dirty bitmap was incorrect leading to a buffer overrun. Fix it by splitting out the dirty bitmap into a separate bitmap per slot. Fixes: 609e6202ea5f ("KVM: selftests: Support multiple slots in dirty_log_perf_test") Signed-off-by: David Matlack <dmatlack@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-Id: <20210917173657.44011-4-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: selftests: Refactor help message for -s backing_srcDavid Matlack
All selftests that support the backing_src option were printing their own description of the flag and then calling backing_src_help() to dump the list of available backing sources. Consolidate the flag printing in backing_src_help() to align indentation, reduce duplicated strings, and improve consistency across tests. Note: Passing "-s" to backing_src_help is unnecessary since every test uses the same flag. However I decided to keep it for code readability at the call sites. While here this opportunistically fixes the incorrectly interleaved printing -x help message and list of backing source types in dirty_log_perf_test. Fixes: 609e6202ea5f ("KVM: selftests: Support multiple slots in dirty_log_perf_test") Reviewed-by: Ben Gardon <bgardon@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20210917173657.44011-3-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: selftests: Change backing_src flag to -s in demand_paging_testDavid Matlack
Every other KVM selftest uses -s for the backing_src, so switch demand_paging_test to match. Reviewed-by: Ben Gardon <bgardon@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20210917173657.44011-2-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22selftests: KVM: Align SMCCC call with the spec in steal_timeOliver Upton
The SMC64 calling convention passes a function identifier in w0 and its parameters in x1-x17. Given this, there are two deviations in the SMC64 call performed by the steal_time test: the function identifier is assigned to a 64 bit register and the parameter is only 32 bits wide. Align the call with the SMCCC by using a 32 bit register to handle the function identifier and increasing the parameter width to 64 bits. Suggested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-Id: <20210921171121.2148982-3-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22selftests: KVM: Fix check for !POLLIN in demand_paging_testOliver Upton
The logical not operator applies only to the left hand side of a bitwise operator. As such, the check for POLLIN not being set in revents wrong. Fix it by adding parentheses around the bitwise expression. Fixes: 4f72180eb4da ("KVM: selftests: Add demand paging content to the demand paging test") Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20210921171121.2148982-2-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugsSean Christopherson
Add a test to verify an rseq's CPU ID is updated correctly if the task is migrated while the kernel is handling KVM_RUN. This is a regression test for a bug introduced by commit 72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function"), where TIF_NOTIFY_RESUME would be cleared by KVM without updating rseq, leading to a stale CPU ID and other badness. Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Message-Id: <20210901203030.1292304-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-21seltests: bpf: test_tunnel: Use ip neighJiri Benc
The 'arp' command is deprecated and is another dependency of the selftest. Just use 'ip neigh', the test depends on iproute2 already. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/40f24b9d3f0f53b5c44471b452f9a11f4d13b7af.1632236133.git.jbenc@redhat.com
2021-09-21selftests/bpf: Adopt attach_probe selftest to work on old kernelsAndrii Nakryiko
Make sure to not use ref_ctr_off feature when running on old kernels that don't support this feature. This allows to test libbpf's legacy kprobe and uprobe logic on old kernels. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210921210036.1545557-3-andrii@kernel.org
2021-09-21tools/testing/cxl: Introduce a mock memory device + driverDan Williams
Introduce an emulated device-set plus driver to register CXL memory devices, 'struct cxl_memdev' instances, in the mock cxl_test topology. This enables the development of HDM Decoder (Host-managed Device Memory Decoder) programming flow (region provisioning) in an environment that can be updated alongside the kernel as it gains more functionality. Whereas the cxl_pci module looks for CXL memory expanders on the 'pci' bus, the cxl_mock_mem module attaches to CXL expanders on the platform bus emitted by cxl_test. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/163116440099.2460985.10692549614409346604.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21tools/testing/cxl: Introduce a mocked-up CXL port hierarchyDan Williams
Create an environment for CXL plumbing unit tests. Especially when it comes to an algorithm for HDM Decoder (Host-managed Device Memory Decoder) programming, the availability of an in-kernel-tree emulation environment for CXL configuration complexity and corner cases speeds development and deters regressions. The approach taken mirrors what was done for tools/testing/nvdimm/. I.e. an external module, cxl_test.ko built out of the tools/testing/cxl/ directory, provides mock implementations of kernel APIs and kernel objects to simulate a real world device hierarchy. One feedback for the tools/testing/nvdimm/ proposal was "why not do this in QEMU?". In fact, the CXL development community has developed a QEMU model for CXL [1]. However, there are a few blocking issues that keep QEMU from being a tight fit for topology + provisioning unit tests: 1/ The QEMU community has yet to show interest in merging any of this support that has had patches on the list since November 2020. So, testing CXL to date involves building custom QEMU with out-of-tree patches. 2/ CXL mechanisms like cross-host-bridge interleave do not have a clear path to be emulated by QEMU without major infrastructure work. This is easier to achieve with the alloc_mock_res() approach taken in this patch to shortcut-define emulated system physical address ranges with interleave behavior. The QEMU enabling has been critical to get the driver off the ground, and may still move forward, but it does not address the ongoing needs of a regression testing environment and test driven development. This patch adds an ACPI CXL Platform definition with emulated CXL multi-ported host-bridges. A follow on patch adds emulated memory expander devices. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20210202005948.241655-1-ben.widawsky@intel.com [1] Link: https://lore.kernel.org/r/163164680798.2831381.838684634806668012.stgit@dwillia2-desk3.amr.corp.intel.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21kselftest/arm64: signal: Skip tests if required features are missingCristian Marussi
During initialization of a signal testcase, features declared as required are properly checked against the running system but no action is then taken to effectively skip such a testcase. Fix core signals test logic to abort initialization and report such a testcase as skipped to the KSelfTest framework. Fixes: f96bf4340316 ("kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210920121228.35368-1-cristian.marussi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-09-21selftests: netfilter: add zone stress test with colliding tuplesFlorian Westphal
Add 20k entries to the connection tracking table, once from the data plane, once via ctnetlink. In both cases, each entry lives in a different conntrack zone and addresses/ports are identical. Expectation is that insertions work and occurs in constant time: PASS: added 10000 entries in 1215 ms (now 10000 total, loop 1) PASS: added 10000 entries in 1214 ms (now 20000 total, loop 2) PASS: inserted 20000 entries from packet path in 2434 ms total PASS: added 10000 entries in 57631 ms (now 10000 total) PASS: added 10000 entries in 58572 ms (now 20000 total) PASS: inserted 20000 entries via ctnetlink in 116205 ms Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-09-21selftests: netfilter: add selftest for directional zone supportFlorian Westphal
Add a script to exercise NAT port clash resolution with directional zones. Add net namespaces that use the same IP address and connect them to a gateway. Gateway uses policy routing based on iif/mark and conntrack zones to isolate the client namespaces. In server direction, same zone with NAT to single address is used. Then, connect to a server from each client netns, using identical connection id, i.e. saddr:sport -> daddr:dport. Expectation is for all connections to succeeed: NAT gatway is supposed to do port reallocation for each of the (clashing) connections. This is based on the description/use case provided in the commit message of deedb59039f111 ("netfilter: nf_conntrack: add direction support for zones"). Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-09-19Merge tag 'powerpc-5.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix crashes when scv (System Call Vectored) is used to make a syscall when a transaction is active, on Power9 or later. - Fix bad interactions between rfscv (Return-from scv) and Power9 fake-suspend mode. - Fix crashes when handling machine checks in LPARs using the Hash MMU. - Partly revert a recent change to our XICS interrupt controller code, which broke the recently added Microwatt support. Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero, Joel Stanley, Nicholas Piggin. * tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/xics: Set the IRQ chip data for the ICS native backend powerpc/mce: Fix access error in mce handler KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers powerpc/64s: system call rfscv workaround for TM bugs selftests/powerpc: Add scv versions of the basic TM syscall tests powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
2021-09-19selftests: net: af_unix: Fix makefile to use TEST_GEN_PROGSShuah Khan
Makefile uses TEST_PROGS instead of TEST_GEN_PROGS to define executables. TEST_PROGS is for shell scripts that need to be installed and run by the common lib.mk framework. The common framework doesn't touch TEST_PROGS when it does build and clean. As a result "make kselftest-clean" and "make clean" fail to remove executables. Run and install work because the common framework runs and installs TEST_PROGS. Build works because the Makefile defines "all" rule which is unnecessary if TEST_GEN_PROGS is used. Use TEST_GEN_PROGS so the common framework can handle build/run/ install/clean properly. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19selftests: net: af_unix: Fix incorrect args in test result msgShuah Khan
Fix the args to fprintf(). Splitting the message ends up passing incorrect arg for "sigurg %d" and an extra arg overall. The test result message ends up incorrect. test_unix_oob.c: In function ‘main’: test_unix_oob.c:274:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘char *’ [-Wformat=] 274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ", | ~^ | | | int | %s 275 | "atmark %d\n", signal_recvd, len, oob, atmark); | ~~~~~~~~~~~~~ | | | char * test_unix_oob.c:274:19: warning: too many arguments for format [-Wformat-extra-args] 274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ", Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-18selftests: mptcp: add mptcp getsockopt test casesFlorian Westphal
Add a test program that retrieves the three info types: 1. mptcp meta information 2. tcp info for subflow 3. subflow endpoint addresses For all three rudimentary checks are added. 1. Meta information checks that the logical mptcp sequence numbers advance as expected, based on the bytes read (init seq + bytes_received/sent) and the connection state (after close, we should exect 1 extra byte due to FIN). 2. TCP info checks the number of bytes sent/received vs. sums of read/write syscall return values. 3. Subflow endpoint addresses are checked vs. getsockname/getpeername result. Tests for forward compatibility (0-initialisation of output-only fields in mptcp_subflow_data structure) are added as well. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17selftests/bpf: Add trace_vprintk test progDave Marchevsky
This commit adds a test prog for vprintk which confirms that: * bpf_trace_vprintk is writing to /sys/kernel/debug/tracing/trace_pipe * __bpf_vprintk macro works as expected * >3 args are printed * bpf_printk w/ 0 format args compiles * bpf_trace_vprintk call w/ a fmt specifier but NULL fmt data fails Approach and code are borrowed from trace_printk test. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210917182911.2426606-9-davemarchevsky@fb.com
2021-09-17selftests/bpf: Migrate prog_tests/trace_printk CHECKs to ASSERTsDave Marchevsky
Guidance for new tests is to use ASSERT macros instead of CHECK. Since trace_vprintk test will borrow heavily from trace_printk's, migrate its CHECKs so it remains obvious that the two are closely related. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210917182911.2426606-8-davemarchevsky@fb.com
2021-09-17bpftool: Only probe trace_vprintk feature in 'full' modeDave Marchevsky
Since commit 368cb0e7cdb5e ("bpftool: Make probes which emit dmesg warnings optional"), some helpers aren't probed by bpftool unless `full` arg is added to `bpftool feature probe`. bpf_trace_vprintk can emit dmesg warnings when probed, so include it. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210917182911.2426606-7-davemarchevsky@fb.com
2021-09-17selftests/bpf: Stop using bpf_program__loadDave Marchevsky
bpf_program__load is not supposed to be used directly. Replace it with bpf_object__ APIs for the reference_tracking prog_test, which is the last offender in bpf selftests. Some additional complexity is added for this test, namely the use of one bpf_object to iterate through progs, while a second bpf_object is created and opened/closed to test actual loading of progs. This is because the test was doing bpf_program__load then __unload to test loading of individual progs and same semantics with bpf_object__load/__unload result in failure to load an __unload-ed obj. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210917182911.2426606-3-davemarchevsky@fb.com
2021-09-17Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-09-17 We've added 63 non-merge commits during the last 12 day(s) which contain a total of 65 files changed, 2653 insertions(+), 751 deletions(-). The main changes are: 1) Streamline internal BPF program sections handling and bpf_program__set_attach_target() in libbpf, from Andrii. 2) Add support for new btf kind BTF_KIND_TAG, from Yonghong. 3) Introduce bpf_get_branch_snapshot() to capture LBR, from Song. 4) IMUL optimization for x86-64 JIT, from Jie. 5) xsk selftest improvements, from Magnus. 6) Introduce legacy kprobe events support in libbpf, from Rafael. 7) Access hw timestamp through BPF's __sk_buff, from Vadim. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits) selftests/bpf: Fix a few compiler warnings libbpf: Constify all high-level program attach APIs libbpf: Schedule open_opts.attach_prog_fd deprecation since v0.7 selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() API libbpf: Allow skipping attach_func_name in bpf_program__set_attach_target() libbpf: Deprecated bpf_object_open_opts.relaxed_core_relocs selftests/bpf: Stop using relaxed_core_relocs which has no effect libbpf: Use pre-setup sec_def in libbpf_find_attach_btf_id() bpf: Update bpf_get_smp_processor_id() documentation libbpf: Add sphinx code documentation comments selftests/bpf: Skip btf_tag test if btf_tag attribute not supported docs/bpf: Add documentation for BTF_KIND_TAG selftests/bpf: Add a test with a bpf program with btf_tag attributes selftests/bpf: Test BTF_KIND_TAG for deduplication selftests/bpf: Add BTF_KIND_TAG unit tests selftests/bpf: Change NAME_NTH/IS_NAME_NTH for BTF_KIND_TAG format selftests/bpf: Test libbpf API function btf__add_tag() bpftool: Add support for BTF_KIND_TAG libbpf: Add support for BTF_KIND_TAG libbpf: Rename btf_{hash,equal}_int to btf_{hash,equal}_int_tag ... ==================== Link: https://lore.kernel.org/r/20210917173738.3397064-1-ast@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-17selftests/bpf: Fix a few compiler warningsYonghong Song
With clang building selftests/bpf, I hit a few warnings like below: .../bpf_iter.c:592:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable] __u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0; ^ .../bpf_iter.c:688:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable] __u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0; ^ .../tc_redirect.c:657:6: warning: variable 'target_fd' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!ASSERT_OK_PTR(nstoken, "setns " NS_FWD)) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .../tc_redirect.c:743:6: note: uninitialized use occurs here if (target_fd >= 0) ^~~~~~~~~ Removing unused variables and initializing the previously-uninitialized variable to ensure these warnings are gone. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210917043343.3711917-1-yhs@fb.com
2021-09-17selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() APIAndrii Nakryiko
Switch fexit_bpf2bpf selftest to bpf_program__set_attach_target() instead of using bpf_object_open_opts.attach_prog_fd, which is going to be deprecated. These changes also demonstrate the new mode of set_attach_target() in which it allows NULL when the target is BPF program (attach_prog_fd != 0). Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210916015836.1248906-6-andrii@kernel.org
2021-09-17selftests/bpf: Stop using relaxed_core_relocs which has no effectAndrii Nakryiko
relaxed_core_relocs option hasn't had any effect for a while now, stop specifying it. Next patch marks it as deprecated. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210916015836.1248906-3-andrii@kernel.org
2021-09-17net: update NXP copyright textVladimir Oltean
NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright <year-range> NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts! Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-16Merge tag 'net-5.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - vhost_net: fix OoB on sendmsg() failure - mlx5: bridge, fix uninitialized variable usage - bnxt_en: fix error recovery regression Current release - new code bugs: - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset() Previous releases - regressions: - r6040: restore MDIO clock frequency after MAC reset - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() - dsa: flush switchdev workqueue before tearing down CPU/DSA ports Previous releases - always broken: - ptp: dp83640: don't define PAGE0, avoid compiler warning - igc: fix tunnel segmentation offloads - phylink: update SFP selected interface on advertising changes - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume - mlx5e: fix mutual exclusion between CQE compression and HW TS Misc: - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode - sfc: fallback for lack of xdp tx queues - hns3: add option to turn off page pool feature" * tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) mlxbf_gige: clear valid_polarity upon open igc: fix tunnel offloading net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert net: wan: wanxl: define CROSS_COMPILE_M68K selftests: nci: replace unsigned int with int net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports Revert "net: phy: Uniform PHY driver access" net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup ptp: dp83640: don't define PAGE0 bnx2x: Fix enabling network interfaces without VFs Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"" tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() net-caif: avoid user-triggerable WARN_ON(1) bpf, selftests: Add test case for mixed cgroup v1/v2 bpf, selftests: Add cgroup v1 net_cls classid helpers bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode bpf: Add oversize check before call kvcalloc() net: hns3: fix the timing issue of VF clearing interrupt sources net: hns3: fix the exception when query imp info net: hns3: disable mac in flr process ...
2021-09-16selftests: kvm: fix get_run_delay() ignoring fscanf() return warnShuah Khan
Fix get_run_delay() to check fscanf() return value to get rid of the following warning. When fscanf() fails return MIN_RUN_DELAY_NS from get_run_delay(). Move MIN_RUN_DELAY_NS from steal_time.c to test_util.h so get_run_delay() and steal_time.c can use it. lib/test_util.c: In function ‘get_run_delay’: lib/test_util.c:316:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 316 | fscanf(fp, "%ld %ld ", &val[0], &val[1]); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-16selftests: kvm: move get_run_delay() into lib/test_utilShuah Khan
get_run_delay() is defined static in xen_shinfo_test and steal_time test. Move it to lib and remove code duplication. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-16selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warnShuah Khan
Fix get_trans_hugepagesz() to check fscanf() return value to get rid of the following warning: lib/test_util.c: In function ‘get_trans_hugepagesz’: lib/test_util.c:138:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 138 | fscanf(f, "%ld", &size); | ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-16selftests:kvm: fix get_warnings_count() ignoring fscanf() return warnShuah Khan
Fix get_warnings_count() to check fscanf() return value to get rid of the following warning: x86_64/mmio_warning_test.c: In function ‘get_warnings_count’: x86_64/mmio_warning_test.c:85:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 85 | fscanf(f, "%d", &warnings); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-16torture: Make kvm-remote.sh print size of downloaded tarballPaul E. McKenney
This commit causes kvm-remote.sh to print the size of the tarball that is downloaded to each of the remote systems. This size can help with performance projections and analysis. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-09-16torture: Allot 1G of memory for scftorture runsPaul E. McKenney
By default, torture.sh allots 512M of memory for each guest OS. However, when running scftorture with KASAN, 1G is needed. This commit therefore causes torture.sh to provide the required 1G. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-09-16selftests: nci: replace unsigned int with intXiang wangx
Should not use comparison of unsigned expressions < 0. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15selftests: be sure to make khdr before other targetsLi Zhijian
LKP/0Day reported some building errors about kvm, and errors message are not always same: - lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared (first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’? - lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use in this function); did you mean ‘MAP_HUGE_16GB’? Although kvm relies on the khdr, they still be built in parallel when -j is specified. In this case, it will cause compiling errors. Here we mark target khdr as NOTPARALLEL to make it be always built first. CC: Philip Li <philip.li@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-23 05:13:42 +0000