| Age | Commit message (Collapse) | Author |
|---|
|
In order to fix an ABI problem, we recently changed the way that reads
of the NT_ARM_SVE and NT_ARM_SSVE regsets behave when their
corresponding vector state is inactive.
Update the fp-ptrace test for the new behaviour.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Spickett <david.spickett@arm.com>
Cc: Luis Machado <luis.machado@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250508132644.1395904-25-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to fix an ABI problem, we recently changed the way that
changing the SVE/SME vector length affects PSTATE.SM. Historically,
changing the SME vector length would clear PSTATE.SM. Now, changing the
SME vector length preserves PSTATE.SM.
Update the fp-ptrace test for the new behaviour.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Spickett <david.spickett@arm.com>
Cc: Luis Machado <luis.machado@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250508132644.1395904-24-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to fix an ABI problem, we recently changed the way that a
clone() syscall manipulates TPIDR2 and PSTATE.ZA. Historically the child
would inherit the parent's TPIDR2 value unless CLONE_SETTLS was set, and
now the child will inherit the parent's TPIDR2 value unless CLONE_VM is
set.
Update the tpidr2 test for the new behaviour.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Richard Sandiford <richard.sandiford@arm.com>
Cc: Sander De Smalen <sander.desmalen@arm.com>
Cc: Tamas Petz <tamas.petz@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yury Khrustalev <yury.khrustalev@arm.com>
Link: https://lore.kernel.org/r/20250508132644.1395904-23-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The fp-ptrace test suite expects that FPMR is set to zero when PSTATE.SM
is changed via ptrace, but ptrace has never altered FPMR in this way,
and the test logic erroneously relies upon (and has concealed) a bug
where task_fpsimd_load() would unexpectedly and non-deterministically
clobber FPMR.
Using ptrace, FPMR can only be altered by writing to the NT_ARM_FPMR
regset. The value of PSTATE.SM can be altered by writing to the
NT_ARM_SVE or NT_ARM_SSVE regsets, and/or by changing the SME vector
length (when writing to the NT_ARM_SVE, NT_ARM_SSVE, or NT_ARM_ZA
regsets), but none of these writes will change the value of FPMR.
The task_fpsimd_load() bug was introduced with the initial FPMR support
in commit:
203f2b95a882 ("arm64/fpsimd: Support FEAT_FPMR")
The incorrect FPMR test code was introduced in commit:
7dbd26d0b22d ("kselftest/arm64: Add FPMR coverage to fp-ptrace")
Subsequently, the task_fpsimd_load() bug was fixed in commit:
e5fa85fce08b ("arm64/fpsimd: Don't corrupt FPMR when streaming mode changes")
... whereupon the fp-ptrace FPMR tests started failing reliably, e.g.
| # # Mismatch in saved FPMR: 915058000 != 0
| # not ok 25 SVE write, SVE 64->64, SME 64/0->64/1
Fix this by changing the test to expect that FPMR is *NOT* changed when
PSTATE.SM is changed via ptrace, matching the extant behaviour.
I've chosen to update the test code rather than modifying ptrace to zero
FPMR when PSTATE.SM changes. Not zeroing FPMR is simpler overall, and
allows the NT_ARM_FPMR regset to be handled independently from other
regsets, leaving less scope for error.
Fixes: 7dbd26d0b22d ("kselftest/arm64: Add FPMR coverage to fp-ptrace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Spickett <david.spickett@arm.com>
Cc: Luis Machado <luis.machado@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250508132644.1395904-22-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a test to verify KVM's fastops emulation via forced emulation. KVM's
so called "fastop" infrastructure executes the to-be-emulated instruction
directly on hardware instead of manually emulating the instruction in
software, using various shenanigans to glue together the emulator context
and CPU state, e.g. to get RFLAGS fed into the instruction and back out
for the emulator.
Add testcases for all instructions that are low hanging fruit. While the
primary goal of the selftest is to validate the glue code, a secondary
goal is to ensure "emulation" matches hardware exactly, including for
arithmetic flags that are architecturally undefined. While arithmetic
flags may be *architecturally* undefined, their behavior is deterministic
for a given CPU (likely a given uarch, and possibly even an entire family
or class of CPUs). I.e. KVM has effectively been emulating underlying
hardware behavior for years.
Link: https://lore.kernel.org/r/20250506011250.1089254-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The compiler is unaware of the size of code generated by the ".rept"
assembler directive. This results in the compiler emitting branch
instructions where the offset to branch to exceeds the maximum allowed
value, resulting in build failures like the following:
CC protection_keys
/tmp/ccypKWAE.s: Assembler messages:
/tmp/ccypKWAE.s:2073: Error: operand out of range (0x0000000000020158
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
/tmp/ccypKWAE.s:2509: Error: operand out of range (0x0000000000020130
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
Fix the issue by manually adding nop instructions using the preprocessor.
Link: https://lkml.kernel.org/r/20250428131937.641989-2-nysal@linux.ibm.com
Fixes: 46036188ea1f ("selftests/mm: build with -O2")
Reported-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 50910acd6f615 ("selftests/mm: use sys_pkey helpers consistently")
added a pkey_util.c to refactor some of the protection_keys functions
accessible by other tests. But this broken the build in powerpc in two
ways,
pkey-powerpc.h: In function `arch_is_powervm':
pkey-powerpc.h:73:21: error: storage size of `buf' isn't known
73 | struct stat buf;
| ^~~
pkey-powerpc.h:75:14: error: implicit declaration of function `stat'; did you mean `strcat'? [-Wimplicit-function-declaration]
75 | if ((stat("/sys/firmware/devicetree/base/ibm,partition-name", &buf) == 0) &&
| ^~~~
| strcat
Since pkey_util.c includes pkeys-helper.h, which in turn includes pkeys-powerpc.h,
stat.h including is missing for "struct stat". This is fixed by adding "sys/stat.h"
in pkeys-powerpc.h
Secondly,
pkey-powerpc.h:55:18: warning: format `%llx' expects argument of type `long long unsigned int', but argument 3 has type `u64' {aka `long unsigned int'} [-Wformat=]
55 | dprintf4("%s() changing %016llx to %016llx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
56 | __func__, __read_pkey_reg(), pkey_reg);
| ~~~~~~~~~~~~~~~~~
| |
| u64 {aka long unsigned int}
pkey-helpers.h:63:32: note: in definition of macro `dprintf_level'
63 | sigsafe_printf(args); \
| ^~~~
These format specifier related warning are removed by adding
"__SANE_USERSPACE_TYPES__" to pkeys_utils.c.
Link: https://lkml.kernel.org/r/20250428131937.641989-1-nysal@linux.ibm.com
Fixes: 50910acd6f61 ("selftests/mm: use sys_pkey helpers consistently")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current implementation of the guard region tests assume that /tmp is
mounted as tmpfs, that is shmem.
This isn't always the case, and at least one instance of a spurious test
failure has been reported as a result.
This assumption is unsafe, rushed and silly - and easily remedied by
simply using memfd, so do so.
We also have to fixup the readonly_file test to explicitly only be
applicable to file-backed cases.
Link: https://lkml.kernel.org/r/20250425162436.564002-1-lorenzo.stoakes@oracle.com
Fixes: 272f37d3e99a ("tools/selftests: expand all guard region tests to file-backed")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-mm/a2d2766b-0ab4-437b-951a-8595a7506fe9@arm.com/
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix ethtool syntax for setting ntuple rule into rss. It should be
`context' instead of `action'.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503043007.857215-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add MODULE_DESCRIPTION() to address the following warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in test/cxl_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in test/cxl_mock.o
WARNING: modpost: missing MODULE_DESCRIPTION() in test/cxl_mock_mem.o
[dj: s/CXL test/cxl_test:/ per djbw's comment]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250429235953.4175408-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
This patch adds the "list_peek" test to use the new
bpf_list_{front,back} kfunc.
The test_{front,back}* tests ensure that the return value
is a non_own_ref node pointer and requires the spinlock to be held.
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> # check non_own_ref marking
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch has a much simplified rbtree usage from the
kernel sch_fq qdisc. It has a "struct node_data" which can be
added to two different rbtrees which are ordered by different keys.
The test first populates both rbtrees. Then search for a lookup_key
from the "groot0" rbtree. Once the lookup_key is found, that node
refcount is taken. The node is then removed from another "groot1"
rbtree.
While searching the lookup_key, the test will also try to remove
all rbnodes in the path leading to the lookup_key.
The test_{root,left,right}_spinlock_true tests ensure that the
return value of the bpf_rbtree functions is a non_own_ref node pointer.
This is done by forcing an verifier error by calling a helper
bpf_jiffies64() while holding the spinlock. The tests then
check for the verifier message
"call bpf_rbtree...R0=rcu_ptr_or_null_node..."
The other test_{root,left,right}_spinlock_false tests ensure that
they must be called with spinlock held.
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> # Check non_own_ref marking
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The bpf_rbtree_{remove,left,right} requires the root's lock to be held.
They also check the node_internal->owner is still owned by that root
before proceeding, so it is safe to allow refcounted bpf_rb_node
pointer to be used in these kfuncs.
In a bpf fq implementation which is much closer to the kernel fq,
https://lore.kernel.org/bpf/20250418224652.105998-13-martin.lau@linux.dev/,
a networking flow (allocated by bpf_obj_new) can be added to two different
rbtrees. There are cases that the flow is searched from one rbtree,
held the refcount of the flow, and then removed from another rbtree:
struct fq_flow {
struct bpf_rb_node fq_node;
struct bpf_rb_node rate_node;
struct bpf_refcount refcount;
unsigned long sk_long;
};
int bpf_fq_enqueue(...)
{
/* ... */
bpf_spin_lock(&root->lock);
while (can_loop) {
/* ... */
if (!p)
break;
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
if (gc_f->sk_long == sk_long) {
f = bpf_refcount_acquire(gc_f);
break;
}
/* ... */
}
bpf_spin_unlock(&root->lock);
if (f) {
bpf_spin_lock(&q->lock);
bpf_rbtree_remove(&q->delayed, &f->rate_node);
bpf_spin_unlock(&q->lock);
}
}
bpf_rbtree_{left,right} do not need this change but are relaxed together
with bpf_rbtree_remove instead of adding extra verifier logic
to exclude these kfuncs.
To avoid bi-sect failure, this patch also changes the selftests together.
The "rbtree_api_remove_unadded_node" is not expecting verifier's error.
The test now expects bpf_rbtree_remove(&groot, &m->node) to return NULL.
The test uses __retval(0) to ensure this NULL return value.
Some of the "only take non-owning..." failure messages are changed also.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Apparently, nf_conntrack_bridge changes the way in which fragments
are handled, dealing to packet drop. From Huajian Yang.
2) Add a selftest to stress the conntrack subsystem, from Florian Westphal.
3) nft_quota depletion is off-by-one byte, Zhongqiu Duan.
4) Rewrites the procfs to read the conntrack table to speed it up,
from Florian Westphal.
5) Two patches to prevent overflow in nft_pipapo lookup table and to
clamp the maximum bucket size.
6) Update nft_fib selftest to check for loopback packet bypass.
From Florian Westphal.
netfilter pull request 25-05-06
* tag 'nf-next-25-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: nft_fib.sh: check lo packets bypass fib lookup
netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX
netfilter: nft_set_pipapo: prevent overflow in lookup table allocation
netfilter: nf_conntrack: speed up reads from nf_conntrack proc file
netfilter: nft_quota: match correctly when the quota just depleted
selftests: netfilter: add conntrack stress test
netfilter: bridge: Move specific fragmented packet to slow_path instead of dropping it
====================
Link: https://patch.msgid.link/20250505234151.228057-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
ksft runner sends 2 SIGTERMs in a row if a test runs out of time.
Handle this in a similar way we handle SIGINT - cleanup and stop
running further tests.
Because we get 2 signals we need a bit of logic to ignore
the subsequent one, they come immediately one after the other
(due to commit 9616cb34b08e ("kselftest/runner.sh: Propagate SIGTERM
to runner child")).
This change makes sure we run cleanup (scheduled defer()s)
and also print a stack trace on SIGTERM, which doesn't happen
by default. Tests occasionally hang in NIPA and it's impossible
to tell what they are waiting from or doing.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250503011856.46308-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Until recently, the kernel could unexpectedly discard SVE state for a
period after a KVM_RUN ioctl, when the guest did not execute any
FPSIMD/SVE/SME instructions. We fixed that issue in commit:
fbc7e61195e2 ("KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state")
Add a test which tries to provoke that issue by manipulating SVE state
before/after running a guest which does not execute any FPSIMD/SVE/SME
instructions. The test executes a handful of iterations to miminize
the risk that the issue is masked by preemption.
Signed-off--by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250417-kvm-selftest-sve-signal-v1-1-6330c2f3da0c@kernel.org
[maz: Restored MR's SoB, fixed commit message according to MR's write-up]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Currently, the test result does not differentiate between the cases when
either one of the address families are configured or if both the address
families are configured. Ideally, the result should report if a
particular case was skipped.
./drivers/net/ping.py
TAP version 13
1..7
ok 1 ping.test_default_v4 # SKIP Test requires IPv4 connectivity
ok 2 ping.test_default_v6
ok 3 ping.test_xdp_generic_sb
ok 4 ping.test_xdp_generic_mb
ok 5 ping.test_xdp_native_sb
ok 6 ping.test_xdp_native_mb
ok 7 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:2 error:0
Fixes: 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503013518.1722913-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On a system with either of the ipv4 or ipv6 information missing, tests
are currently skipped. Ideally, the test should run as long as at least
one address family is present. This patch make test run whenever
possible.
Before:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default # SKIP Test requires IPv4 connectivity
ok 2 ping.test_xdp_generic_sb # SKIP Test requires IPv4 connectivity
ok 3 ping.test_xdp_generic_mb # SKIP Test requires IPv4 connectivity
ok 4 ping.test_xdp_native_sb # SKIP Test requires IPv4 connectivity
ok 5 ping.test_xdp_native_mb # SKIP Test requires IPv4 connectivity
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:6 error:0
After:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default
ok 2 ping.test_xdp_generic_sb
ok 3 ping.test_xdp_generic_mb
ok 4 ping.test_xdp_native_sb
ok 5 ping.test_xdp_native_mb
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:1 error:0
Fixes: 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250503013518.1722913-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The `get_interface_info` call has ip version hard-coded which leads to
failures on an IPV6 system. The NetDrvEnv class already gathers
information about remote interface, so instead of fixing the local
implementation switch to using cfg.remote_ifname.
Before:
./drivers/net/ping.py
Traceback (most recent call last):
File "/new_tests/./drivers/net/ping.py", line 217, in <module>
main()
File "/new_tests/./drivers/net/ping.py", line 204, in main
get_interface_info(cfg)
File "/new_tests/./drivers/net/ping.py", line 128, in get_interface_info
raise KsftFailEx('Can not get remote interface')
net.lib.py.ksft.KsftFailEx: Can not get remote interface
After:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default # SKIP Test requires IPv4 connectivity
ok 2 ping.test_xdp_generic_sb # SKIP Test requires IPv4 connectivity
ok 3 ping.test_xdp_generic_mb # SKIP Test requires IPv4 connectivity
ok 4 ping.test_xdp_native_sb # SKIP Test requires IPv4 connectivity
ok 5 ping.test_xdp_native_mb # SKIP Test requires IPv4 connectivity
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:6 error:0
Fixes: 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503013518.1722913-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GRE devices have their special code for IPv6 link-local address
generation that has been the source of several regressions in the past.
Add selftest to check that all gre, ip6gre, gretap and ip6gretap get an
IPv6 link-link local address in accordance with the
net.ipv6.conf.<dev>.addr_gen_mode sysctl.
Note: This patch was originally applied as commit 6f50175ccad4 ("selftests:
Add IPv6 link-local address generation tests for GRE devices.").
However, it was then reverted by commit 355d940f4d5a ("Revert "selftests:
Add IPv6 link-local address generation tests for GRE devices."")
because the commit it depended on was going to be reverted. Now that
the situation is resolved, we can add this selftest again (no changes
since original patch, appart from context update in
tools/testing/selftests/net/Makefile).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/2c3a5733cb3a6e3119504361a9b9f89fda570a2d.1746225214.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up two build warnings:
[1]
iou-zcrx.c: In function ‘process_recvzc’:
iou-zcrx.c:263:37: warning: too many arguments for format [-Wformat-extra-args]
263 | error(1, 0, "payload mismatch at ", i);
| ^~~~~~~~~~~~~~~~~~~~~~
[2] Use "%zd" for ssize_t type as better
iou-zcrx.c: In function ‘run_client’:
iou-zcrx.c:357:47: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
357 | error(1, 0, "send(): %d", sent);
| ~^ ~~~~
| | |
| int ssize_t {aka long int}
| %ld
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250502175136.1122-1-haiyuewa@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch aims to add chk_dump_subflow in diag.sh. The subflow's
info can be obtained through "ss -tin", then use the 'mptcp_diag'
to verify the token in subflow_info.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/524
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-7-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds 'get_subflow_info' in 'mptcp_diag', which can check whether
a TCP connection is an MPTCP subflow based on the "INET_ULP_INFO_MPTCP"
with tcp_diag method.
The helper 'print_subflow_info' in 'mptcp_diag' can print the subflow_filed
of an MPTCP subflow for further checking the 'subflow_info' through
inet_diag method.
The example of the whole output should be:
$ ./mptcp_diag -s "127.0.0.1:10000 127.0.0.1:38984"
127.0.0.1:10000 -> 127.0.0.1:38984
It's a mptcp subflow, the subflow info:
flags:Mec token:0000(id:0)/4278e77e(id:0) seq:9288466187236176036 \
sfseq:1 ssnoff:2317083055 maplen:215
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-6-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch introduces the '__u32 proto' variable to the 'send_query' and
'recv_nlmsg' functions for further extending function.
In the 'send_query' function, the inclusion of this variable makes the
structure clearer and more readable.
In the 'recv_nlmsg' function, the '__u32 proto' variable ensures that
the 'diag_info' field remains unmodified when processing IPPROTO_TCP data,
thereby preventing unintended transformation into 'mptcp_info' format.
While at it, increment iovlen directly when an item is added to simplify
this portion of the code and improve its readaility.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-5-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch use 'inet_diag_req_v2' instead of 'token' as parameters of
send_query, and construct the req in 'get_mptcpinfo'.
This modification enhances the clarity of the code, and prepare for the
dump_subflow_info.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-4-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a struct named 'params' to save 'target_token' and other
future parameters. This structure facilitates future function expansions.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-3-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
getaddrinfo MPTCP is recently supported in glibc and IPPROTO_MPTCP for
getaddrinfo is used in mptcp_connect.c. But in mptcp_sockopt.c and
mptcp_inq.c, IPPROTO_TCP are still used for getaddrinfo, So this patch
updates them.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-2-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_lib_get_info_value() will only print the first entry that match
the filter because of the ';q' at the end. As a consequence, the 'sed'
command could finish before the previous 'grep' one and print a 'write
error' warning because it is trying to write data to the closed pipe.
Such warnings are not interesting, they can be hidden by muting stderr
here for grep.
While at it, clearly indicate that mptcp_lib_get_info_value() will only
print the first matched entry to avoid confusions later on.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-1-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Building kublk currently fails (with a "could not find linux/ublk_cmd.h"
error message) if kernel headers are not installed in a system-global
location (i.e. somewhere in the compiler's default include search path).
This failure is unnecessary, as make kselftest installs kernel headers
in the build tree - kublk's build just isn't looking for them properly.
There is an include path in kublk's CFLAGS which is probably intended to
find the kernel headers installed in the build tree; fix it so that it
can actually find them.
This introduces some macro redefinition issues between glibc-provided
headers and kernel headers; fix those by eliminating one include in
kublk.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429-ublk_selftests-v2-3-e970b6d9e4f4@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convention dictates that tests should not log anything on success. Make
test_generic_06 follow this convention.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429-ublk_selftests-v2-2-e970b6d9e4f4@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Compiler warnings can catch bugs at compile time; thus, heeding them is
usually a good idea. Turn warnings into errors by default for the kublk
build so that anyone making changes is forced to heed them. Compiler
warnings can also sometimes produce annoying false positives, so provide
a flag WERROR that the developer can use as follows to have the build
and selftests run go through even if there are warnings:
make WERROR=0 TARGETS=ublk kselftest
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429-ublk_selftests-v2-1-e970b6d9e4f4@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
"sockmap_ktls disconnect_after_delete" is effectively moot after
disconnect has been disabled for TLS [1][2]. Remove the test
completely.
[1] https://lore.kernel.org/bpf/20250416170246.2438524-1-ihor.solodrai@linux.dev/
[2] https://lore.kernel.org/netdev/20250404180334.3224206-1-kuba@kernel.org/
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250502185221.1556192-1-isolodrai@meta.com
|
|
Integrate the reproducer from Alan into TC selftests and use scapy to
generate TCP traffic instead of relying on ping command.
Cc: Alan J. Wylie <alan@wylie.me.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250428232955.1740419-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-05-02
We've added 14 non-merge commits during the last 10 day(s) which contain
a total of 13 files changed, 740 insertions(+), 121 deletions(-).
The main changes are:
1) Avoid skipping or repeating a sk when using a UDP bpf_iter,
from Jordan Rife.
2) Fixed a crash when a bpf qdisc is set in
the net.core.default_qdisc, from Amery Hung.
3) A few other fixes in the bpf qdisc, from Amery Hung.
- Always call qdisc_watchdog_init() in the .init prologue such that
the .reset/.destroy epilogue can always call qdisc_watchdog_cancel()
without issue.
- bpf_qdisc_init_prologue() was incorrectly returning an error
when the bpf qdisc is set as the default_qdisc and the mq is creating
the default_qdisc. It is now fixed.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Cleanup bpf qdisc selftests
selftests/bpf: Test attaching a bpf qdisc with incomplete operators
bpf: net_sched: Make some Qdisc_ops ops mandatory
selftests/bpf: Test setting and creating bpf qdisc as default qdisc
bpf: net_sched: Fix bpf qdisc init prologue when set as default qdisc
selftests/bpf: Add tests for bucket resume logic in UDP socket iterators
selftests/bpf: Return socket cookies from sock_iter_batch progs
bpf: udp: Avoid socket skips and repeats during iteration
bpf: udp: Use bpf_udp_iter_batch_item for bpf_udp_iter_state batch items
bpf: udp: Get rid of st_bucket_done
bpf: udp: Make sure iter->batch always contains a full bucket snapshot
bpf: udp: Make mem flags configurable through bpf_iter_udp_realloc_batch
bpf: net_sched: Fix using bpf qdisc as default qdisc
selftests/bpf: Fix compilation errors
====================
Link: https://patch.msgid.link/20250503010755.4030524-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Trying to cut the branch you are sat on is pretty dumb. And so is
trying to disable the instruction set you are executing on.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250429114117.3618800-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Merge 6.15 block fixes in, once again, to resolve conflicts with the
fixes for ublk that went into mainline and the 6.16 ublk updates.
* block-6.15:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With reverted fix:
PASS: fib expression did not cause unwanted packet drops
[ 37.285169] ns1-KK76Kt nft_rpfilter: IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=127.0.0.1 DST=127.0.0.1 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=32287 DF PROTO=ICMP TYPE=8 CODE=0 ID=1818 SEQ=1
FAIL: rpfilter did drop packets
FAIL: ns1-KK76Kt cannot reach 127.0.0.1, ret 0
Check for this.
Link: https://lore.kernel.org/netfilter/20250422114352.GA2092@breakpoint.cc/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new test case to check:
- conntrack_max limit is effective
- conntrack_max limit cannot be exceeded from within a netns
- resizing the hash table while packets are inflight works
- removal of all conntrack rules disables conntrack in netns
- conntrack tool dump (conntrack -L) returns expected number
of (unique) entries
- procfs interface - if available - has same number of entries
as conntrack -L dump
Expected output with selftest framework:
selftests: net/netfilter: conntrack_resize.sh
PASS: got 1 connections: netns conntrack_max is pernet bound
PASS: got 100 connections: netns conntrack_max is init_net bound
PASS: dump in netns had same entry count (-C 1778, -L 1778, -p 1778, /proc 0)
PASS: dump in netns had same entry count (-C 2000, -L 2000, -p 2000, /proc 0)
PASS: test parallel conntrack dumps
PASS: resize+flood
PASS: got 0 connections: conntrack disabled
PASS: got 1 connections: conntrack enabled
ok 1 selftests: net/netfilter: conntrack_resize.sh
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card"
* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ASoC: amd: ps: fix for irq handler return status
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: stm32: sai: add a check on minimal kernel frequency
ASoC: stm32: sai: skip useless iterations on kernel rate loop
ALSA: hda/realtek - Add more HP laptops which need mute led fixup
ALSA: hda/realtek: Fix built-mic regression on other ASUS models
ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
ALSA: usb-audio: Fix duplicated name in MIDI substream names
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
ASoC: amd: acp: Fix NULL pointer deref on acp resume path
ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
...
|
|
Implement a simple NUMA aware spinlock for testing and howto purposes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Test the basic functionality for the NUMA and MPOL flags:
- FUTEX2_NUMA should take the NUMA node which is after the uaddr
and use it.
- Only update the node if FUTEX_NO_NODE was set by the user
- FUTEX2_MPOL should use the memory based on the policy. I attempted to
set the node with mbind() and then use this with MPOL but this fails
and futex falls back to the default node for the current CPU.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-22-bigeasy@linutronix.de
|
|
Test the basic functionality of the private hash:
- Upon start, with no threads there is no private hash.
- The first thread initializes the private hash.
- More than four threads will increase the size of the private hash if
the system has more than 16 CPUs online.
- Once the user sets the size of private hash, auto scaling is disabled.
- The user is only allowed to use numbers to the power of two.
- The user may request the global or make the hash immutable.
- Once the global hash has been set or the hash has been made immutable,
further changes are not allowed.
- Futex operations should work the whole time. It must be possible to
hold a lock, such a PI initialised mutex, during the resize operation.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-21-bigeasy@linutronix.de
|
|
Make it build without relying on recent headers.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Some cleanups:
- Remove unnecessary kfuncs declaration
- Use _ns in the test name to run tests in a separate net namespace
- Call skeleton __attach() instead of bpf_map__attach_struct_ops() to
simplify tests.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Implement .destroy in bpf_fq and bpf_fifo as it is now mandatory.
Test attaching a bpf qdisc with a missing operator .init. This is not
allowed as bpf qdisc qdisc_watchdog_cancel() could have been called with
an uninitialized timer.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
First, test that bpf qdisc can be set as default qdisc. Then, attach
an mq qdisc to see if bpf qdisc can be successfully created and grafted.
The test is a sequential test as net.core.default_qdisc is global.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Extend sev_smoke_test to also run a minimal SEV-SNP smoke test that
initializes and sets up private memory regions required to run a simple
SEV-SNP guest.
Similar to its SEV-ES smoke test counterpart, this also does not
support GHCB and ucall yet and uses the GHCB MSR protocol to trigger an
exit of the type KVM_EXIT_SYSTEM_EVENT.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-11-prsampat@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
