| Age | Commit message (Collapse) | Author |
|---|
|
The device type for IPv4 GRE is "gre" not "ipgre",
unlike for IPv6 which uses "ip6gre".
Not sure how I missed this when writing the test, perhaps
because all HW I have access to is on an IPv6-only network.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing config options for the tso.py test, specifically
to make sure the kernel is built with vxlan and gre tunnels.
I noticed this while adding a TSO-capable device QEMU to the CI.
Previously we only run virtio tests and it doesn't report LSO
stats on the QEMU we have.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
arch_timer_edge_cases
arch_timer_edge_cases uses ~0 as the maximum counter value, however there's
no architectural guarantee that this is valid.
Figure out the effective counter width based on the effective frequency
like it's done by the kernel.
This also serves as a workaround for AC03_CPU_14 that led to the
following assertion failure on ampere-one machines:
==== Test Assertion Failure ====
arm64/arch_timer_edge_cases.c:169: timer_condition == istatus
pid=11236 tid=11236 errno=4 - Interrupted system call
1 0x0000000000404ce7: test_run at arch_timer_edge_cases.c:938
2 0x0000000000401ebb: main at arch_timer_edge_cases.c:1053
3 0x0000ffff9fa8625b: ?? ??:0
4 0x0000ffff9fa8633b: ?? ??:0
5 0x0000000000401fef: _start at ??:?
0x1 != 0x0 (timer_condition != istatus)
Note that the following subtest only worked since the counter initialized
with CVAL_MAX would instantly overflow (which is no longer the case):
test_set_cnt_after_cval_no_irq(timer, 0, DEF_CNT, CVAL_MAX, sm);
To fix this we could swap CVAL_MAX for 0 here but since that is already
done by test_move_counters_behind_timers() let's remove that subtest.
Link: https://lore.kernel.org/kvmarm/ac1de1d2-ef2b-d439-dc48-8615e121b07b@redhat.com
Link: https://amperecomputing.com/assets/AmpereOne_Developer_ER_v0_80_20240823_28945022f4.pdf
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-5-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
arch_timer_edge_cases hits the following assertion in < 10% of the test runs:
==== Test Assertion Failure ====
arm64/arch_timer_edge_cases.c:490: timer_get_cntct(timer) >= DEF_CNT + (timer_get_cntfrq() * (uint64_t)(delta_2_ms) / 1000)
pid=17110 tid=17110 errno=4 - Interrupted system call
1 0x0000000000404ec7: test_run at arch_timer_edge_cases.c:945
2 0x0000000000401fa3: main at arch_timer_edge_cases.c:1074
3 0x0000ffffa774b587: ?? ??:0
4 0x0000ffffa774b65f: ?? ??:0
5 0x000000000040206f: _start at ??:?
timer_get_cntct(timer) >= DEF_CNT + msec_to_cycles(delta_2_ms)
Enabling the timer without proper xval initialization in set_tval_irq()
resulted in an early interrupt during timer reprogramming. Make sure
to set the xval before setting the enable bit.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-4-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
arch_timer_edge_cases tries to migrate itself across host cpus. Before
the first test, it migrates to cpu 0 by setting up an affinity mask with
only bit 0 set. After that it looks for the next possible cpu in the
current affinity mask which still has only bit 0 set. So there is no
migration at all.
Fix this by reading the default mask at start and use this to find
the next cpu in each iteration.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-3-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Fix the help text for arch_timer_edge_cases to show the correct
option for setting the wait time.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-2-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The test fails at the MPOL step if multiple nodes are available. The
reason is that mbind() sets the policy but the home_node, which is
retrieved by the futex code, is not set. This causes to retrieve the
current node and with multiple nodes it fails on one of the iterations.
Use numa_set_mempolicy_home_node() to set the expected node.
Use ksft_exit_fail_msg() to fail and exit in order not to confuse ktap.
Fixes: 3163369407baf ("selftests/futex: Add futex_numa_mpol")
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250528085521.1938355-3-bigeasy@linutronix.de
|
|
Mark reported that futex_priv_hash fails on ARM64.
It turns out that the command line parsing does not terminate properly
and ends in the default case assuming an invalid option was passed.
Use an int as the return type for getopt().
Closes: https://lore.kernel.org/all/31869a69-063f-44a3-a079-ba71b2506cce@sirena.org.uk/
Fixes: 3163369407baf ("selftests/futex: Add futex_numa_mpol")
Fixes: cda95faef7bcf ("selftests/futex: Add futex_priv_hash")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250528085521.1938355-2-bigeasy@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Zero out the remainder in nft_pipapo AVX2 implementation, otherwise
next lookup could bogusly report a mismatch. This is followed by two
patches to update nft_pipapo selftests to cover for the previous bug.
From Florian Westphal.
2) Check for reverse tuple too in case of esoteric NAT collisions for
UDP traffic and extend selftest coverage. Also from Florian.
netfilter pull request 25-06-05
* tag 'nf-25-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
selftests: netfilter: nft_concat_range.sh: add datapath check for map fill bug
selftests: netfilter: nft_concat_range.sh: prefer per element counters for testing
netfilter: nf_set_pipapo_avx2: fix initial map fill
====================
Link: https://patch.msgid.link/20250605085735.52205-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Antonio Quartulli says:
====================
In this batch you can find the following bug fixes:
Patch 1: when releasing a UDP socket we were wrongly invoking
setup_udp_tunnel_sock() with an empty config. This was not
properly shutting down the UDP encap state.
With this patch we simply undo what was done during setup.
Patch 2: ovpn was holding a reference to a 'struct socket'
without increasing its reference counter. This was intended
and worked as expected until we hit a race condition where
user space tries to close the socket while kernel space is
also releasing it. In this case the (struct socket *)->sk
member would disappear under our feet leading to a null-ptr-deref.
This patch fixes this issue by having struct ovpn_socket hold
a reference directly to the sk member while also increasing
its reference counter.
Patch 3: in case of errors along the TCP RX path (softirq)
we want to immediately delete the peer, but this operation may
sleep. With this patch we move the peer deletion to a scheduled
worker.
Patch 4 and 5 are instead fixing minor issues in the ovpn
kselftests.
* tag 'ovpn-net-20250603' of https://github.com/OpenVPN/ovpn-net-next:
selftest/net/ovpn: fix missing file
selftest/net/ovpn: fix TCP socket creation
ovpn: avoid sleep in atomic context in TCP RX error path
ovpn: ensure sk is still valid during cleanup
ovpn: properly deconfigure UDP-tunnel
====================
Link: https://patch.msgid.link/20250603111110.4575-1-antonio@openvpn.net/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This will fail without the previous bug fix because we erronously
believe that the clashing entry went way.
However, the clash exists in the opposite direction due to an
existing nat mapping:
PASS: IP statless for ns2-LgTIuS
ERROR: failed to test udp ns1-x4iyOW to ns2-LgTIuS with dnat rule step 2, result: ""
This is partially adapted from test instructions from the below
ubuntu tracker.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2109889
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Shaun Brady <brady.1345@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
commit 0935ee6032df ("selftests: netfilter: add test case for recent mismatch bug")
added a regression check for incorrect initial fill of the result map
that was fixed with 791a615b7ad2 ("netfilter: nf_set_pipapo: fix initial map fill").
The test used 'nft get element', i.e., control plane checks for
match/nomatch results.
The control plane however doesn't use avx2 version, so we need to
send+match packets.
As the additional packet match/nomatch is slow, don't do this for
every element added/removed: add and use maybe_send_(no)match
helpers and use them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
testing
The selftest uses following rule:
... @test counter name "test"
Then sends a packet, then checks if the named counter did increment or
not.
This is fine for the 'no-match' test case: If anything matches the
counter increments and the test fails as expected.
But for the 'should match' test cases this isn't optimal.
Consider buggy matching, where the packet matches entry x, but it
should have matched entry y.
In that case the test would erronously pass.
Rework the selftest to use per-element counters to avoid this.
After sending packet that should have matched entry x, query the
relevant element via 'nft reset element' and check that its counter
had incremented.
The 'nomatch' case isn't altered, no entry should match so the named
counter must be 0, changing it to the per-element counter would then
pass if another entry matches.
The downside of this change is a slight increase in test run-time by
a few seconds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
"Two small fixes to selftests"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix selftest btf_tag/btf_type_tag_percpu_vmlinux_helper failure
selftests/bpf: Fix bpf selftest build error
|
|
Some failure modes are handled poorly by kublk. For example, if ublk_drv
is built as a module but not currently loaded into the kernel, ./kublk
add ... just hangs forever. This happens because in this case (and a few
others), the worker process does not notify its parent (via a write to
the shared eventfd) that it has tried and failed to initialize, so the
parent hangs forever. Fix this by ensuring that we always notify the
parent process of any initialization failure, and have the parent print
a (not very descriptive) log line when this happens.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250603-ublk_init_fail-v1-1-87c91486230e@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Remove always true condition in cxl features code
- Add verification of CHBS length for CXL 2.0
- Ignore interleave granularity when interleave ways is 1
- Add update addressing mising MODULE_DESCRIPTION for cxl_test
- A series of cleanups/refactor to prep for AMD Zen5 translate code
- Clean %pa debug printk in core/hdm.c
- Documentation updates:
- Update to CXL Maturity Map
- Fixes to source linking in CXL documentation
- CXL documentation fixes, spelling corrections
- A large collection of CXL documentation for the entire CXL
subsystem, including documentation on CXL related platform and
firmware notes
- Remove redundant code of cxlctl_get_supported_features()
- Series to support CXL RAS Features
- Including "Patrol Scrub Control", "Error Check Scrub",
"Performance Maitenance" and "Memory Sparing". The series
connects CXL to EDAC.
* tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (53 commits)
cxl/edac: Add CXL memory device soft PPR control feature
cxl/edac: Add CXL memory device memory sparing control feature
cxl/edac: Support for finding memory operation attributes from the current boot
cxl/edac: Add support for PERFORM_MAINTENANCE command
cxl/edac: Add CXL memory device ECS control feature
cxl/edac: Add CXL memory device patrol scrub control feature
cxl: Update prototype of function get_support_feature_info()
EDAC: Update documentation for the CXL memory patrol scrub control feature
cxl/features: Remove the inline specifier from to_cxlfs()
cxl/feature: Remove redundant code of get supported features
docs: ABI: Fix "firwmare" to "firmware"
cxl/Documentation: Fix typo in sysfs write_bandwidth attribute path
cxl: doc/linux/access-coordinates Update access coordinates calculation methods
cxl: docs/platform/acpi/srat Add generic target documentation
cxl: docs/platform/cdat reference documentation
Documentation: Update the CXL Maturity Map
cxl: Sync up the driver-api/cxl documentation
cxl: docs - add self-referencing cross-links
cxl: docs/allocation/hugepages
cxl: docs/allocation/reclaim
...
|
|
test-large-mtu.sh is referenced by the Makefile
but does not exist.
Add it along the other scripts.
Fixes: 944f8b6abab6 ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
TCP sockets cannot be created with AF_UNSPEC, but
one among the supported family must be used.
Since commit 944f8b6abab6 ("selftest/net/ovpn: extend
coverage with more test cases") the default address
family for all tests was changed from AF_INET to AF_UNSPEC,
thus breaking all TCP cases.
Restore AF_INET as default address family for TCP listeners.
Fixes: 944f8b6abab6 ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
We have the logic to include net/lib automatically for net related
selftests. However, currently, this logic is only in install target
which means only `make install` will have net/lib included. This commit
adds the logic to all target so that all `make`, `make run_tests` and
`make install` will have net/lib included in net related selftests.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250601142914.13379-1-minhquangbui99@gmail.com
Fixes: b86761ff6374 ("selftests: net: add scaffolding for Netlink tests in Python")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit a571a9a1b120264e24b41eddf1ac5140131bfa84.
The commit in question breaks kunit for older compilers:
$ gcc --version
gcc (GCC) 11.5.0 20240719 (Red Hat 11.5.0-5)
$ ./tools/testing/kunit/kunit.py run --alltests --json --arch=x86_64
Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=x86_64 O=.kunit olddefconfig
ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
This is probably due to unsatisfied dependencies.
Missing: CONFIG_INIT_STACK_ALL_PATTERN=y
Link: https://lore.kernel.org/20250529083811.778bc31b@kernel.org
Fixes: a571a9a1b120 ("kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in all_tests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20250530135800.13437-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "zram: support algorithm-specific parameters" from Sergey Senozhatsky
adds infrastructure for passing algorithm-specific parameters into
zram. A single parameter `winbits' is implemented at this time.
- "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg
charging nmi-safe, which is required by BFP, which can operate in NMI
context.
- "Some random fixes and cleanup to shmem" from Kemeng Shi implements
small fixes and cleanups in the shmem code.
- "Skip mm selftests instead when kernel features are not present" from
Zi Yan fixes some issues in the MM selftest code.
- "mm/damon: build-enable essential DAMON components by default" from
SeongJae Park reworks DAMON Kconfig to make it easier to enable
CONFIG_DAMON.
- "sched/numa: add statistics of numa balance task migration" from Libo
Chen adds more info into sysfs and procfs files to improve visibility
into the NUMA balancer's task migration activity.
- "selftests/mm: cow and gup_longterm cleanups" from Mark Brown
provides various updates to some of the MM selftests to make them
play better with the overall containing framework.
* tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits)
mm/khugepaged: clean up refcount check using folio_expected_ref_count()
selftests/mm: fix test result reporting in gup_longterm
selftests/mm: report unique test names for each cow test
selftests/mm: add helper for logging test start and results
selftests/mm: use standard ksft_finished() in cow and gup_longterm
selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
sched/numa: add statistics of numa balance task
sched/numa: fix task swap by skipping kernel threads
tools/testing: check correct variable in open_procmap()
tools/testing/vma: add missing function stub
mm/gup: update comment explaining why gup_fast() disables IRQs
selftests/mm: two fixes for the pfnmap test
mm/khugepaged: fix race with folio split/free using temporary reference
mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order
mmu_notifiers: remove leftover stub macros
selftests/mm: deduplicate test names in madv_populate
kcov: rust: add flags for KCOV with Rust
mm: rust: make CONFIG_MMU ifdefs more narrow
mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables()
mm/damon/Kconfig: enable CONFIG_DAMON by default
...
|
|
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
|
|
We have stress_03, stress_04 and stress_05 for checking new feature vs.
stress IO & device removal & ublk server crash & recovery, so let the
three existing stress tests cover PER_IO_DAEMON.
Then stress_06 can be removed, since the same test function is included in
stress_03.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250602132113.1398645-1-ming.lei@redhat.com
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
[axboe: remove test_stress_06.sh from Makefile too]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ihor Solodrai reported selftest 'btf_tag/btf_type_tag_percpu_vmlinux_helper'
failure ([1]) during 6.16 merge window. The failure log:
...
7: (15) if r0 == 0x0 goto pc+1 ; R0=ptr_css_rstat_cpu()
; *(volatile int *)rstat; @ btf_type_tag_percpu.c:68
8: (61) r1 = *(u32 *)(r0 +0)
cannot access ptr member updated_children with moff 0 in struct css_rstat_cpu with off 0 size 4
Two changes are needed. First, 'struct cgroup_rstat_cpu' needs to be
replaced with 'struct css_rstat_cpu' to be consistent with new data
structure. Second, layout of 'css_rstat_cpu' is changed compared
to 'cgroup_rstat_cpu'. The first member becomes a pointer so
the bpf prog needs to do 8-byte load instead of 4-byte load.
[1] https://lore.kernel.org/bpf/6f688f2e-7d26-423a-9029-d1b1ef1c938a@linux.dev/
Cc: Ihor Solodrai <ihor.solodrai@linux.dev>
Cc: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20250529201151.1787575-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On linux-next, build for bpf selftest displays an error due to
mismatch in the expected function signature of bpf_testmod_test_read
and bpf_testmod_test_write.
Commit 97d06802d10a ("sysfs: constify bin_attribute argument of bin_attribute::read/write()")
changed the required type for struct bin_attribute to const struct bin_attribute.
To resolve the error, update corresponding signature for the callback.
Fixes: 97d06802d10a ("sysfs: constify bin_attribute argument of bin_attribute::read/write()")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/e915da49-2b9a-4c4c-a34f-877f378129f6@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Link: https://lore.kernel.org/r/20250512091108.2015615-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The kselftest framework uses the string logged when a test result is
reported as the unique identifier for a test, using it to track test
results between runs. The gup_longterm test fails to follow this pattern,
it runs a single test function repeatedly with various parameters but each
result report is a string logging an error message which is fixed between
runs.
Since the code already logs each test uniquely before it starts refactor
to also print this to a buffer, then use that name as the test result.
This isn't especially pretty but is relatively straightforward and is a
great help to tooling.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-4-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kselftest framework uses the string logged when a test result is
reported as the unique identifier for a test, using it to track test
results between runs. The cow test completely fails to follow this
pattern, it runs test functions repeatedly with various parameters with
each result report from those functions being a string logging an error
message which is fixed between runs.
Since the code already logs each test uniquely before it starts refactor
to also print this to a buffer, then use that name as the test result.
This isn't especially pretty but is relatively straightforward and is a
great help to tooling.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-3-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several of the MM tests have a pattern of printing a description of the
test to be run then reporting the actual TAP result using a generic string
not connected to the specific test, often in a shared function used by
many tests. The name reported typically varies depending on the specific
result rather than the test too. This causes problems for tooling that
works with test results, the names reported with the results are used to
deduplicate tests and track them between runs so both duplicated names and
changing names cause trouble for things like UIs and automated bisection.
As a first step towards matching these tests better with the expectations
of kselftest provide helpers which record the test name as part of the
initial print and then use that as part of reporting a result.
This is not added as a generic kselftest helper partly because the use of
a variable to store the test name doesn't fit well with the header only
implementation of kselftest.h and partly because it's not really an
intended pattern. Ideally at some point the mm tests that use it will be
updated to not need it.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-2-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: cow and gup_longterm cleanups", v2.
The bulk of these changes modify the cow and gup_longterm tests to report
unique and stable names for each test, bringing them into line with the
expectations of tooling that works with kselftest. The string reported as
a test result is used by tooling to both deduplicate tests and track tests
between test runs, using the same string for multiple tests or changing
the string depending on test result causes problems for user interfaces
and automation such as bisection.
It was suggested that converting to use kselftest_harness.h would be a
good way of addressing this, however that really wants the set of tests to
run to be known at compile time but both test programs dynamically
enumarate the set of huge page sizes the system supports and test each.
Refactoring to handle this would be even more invasive than these changes
which are large but straightforward and repetitive.
A version of the main gup_longterm cleanup was previously sent separately,
this version factors out the helpers for logging the start of the test
since the cow test looks very similar.
This patch (of 4):
The cow and gup_longterm test programs open code something that looks a
lot like the standard ksft_finished() helper to summarise the test results
and provide an exit code, convert to use ksft_finished().
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-0-ff198df8e38e@kernel.org
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-1-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_DAMON_SYSFS is disabled, the selftests fail with the following
outputs,
not ok 2 selftests: damon: sysfs_update_schemes_tried_regions_wss_estimation.py # exit=1
not ok 3 selftests: damon: damos_quota.py # exit=1
not ok 4 selftests: damon: damos_quota_goal.py # exit=1
not ok 5 selftests: damon: damos_apply_interval.py # exit=1
not ok 6 selftests: damon: damos_tried_regions.py # exit=1
not ok 7 selftests: damon: damon_nr_regions.py # exit=1
not ok 11 selftests: damon: sysfs_update_schemes_tried_regions_hang.py # exit=1
The root cause of this issue is that all the testcases above do not check
the sysfs interface of DAMON whether it exists or not. With this patch
applied, all the testcases above now pass successfully.
Link: https://lkml.kernel.org/r/20250531093937.1555159-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Check if "procmap_out->fd" is negative instead of "procmap_out" (which is
a pointer).
Link: https://lkml.kernel.org/r/aDbFuUTlJTBqziVd@stanley.mountain
Fixes: bd23f293a0d5 ("tools/testing: add PROCMAP_QUERY helper functions in mm self tests")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: levi.yun <yeoreum.yun@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The hugetlb fix introduced in commit ee40c9920ac2 ("mm: fix copy_vma()
error handling for hugetlb mappings") mistakenly did not provide a stub
for the VMA userland testing, which results in a compile error when trying
to build this.
Provide this stub to resolve the issue.
Link: https://lkml.kernel.org/r/20250528-fix-vma-test-v1-1-c8a5f533b38f@oracle.com
Fixes: ee40c9920ac2 ("mm: fix copy_vma() error handling for hugetlb mappings")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When unregistering the signal handler, we have to pass SIG_DFL, and
blindly reading from PFN 0 and PFN 1 seems to be problematic on !x86
systems. In particularly, on arm64 tx2 machines where noting resides at
these physical memory locations, we can generate RAS errors.
Let's fix it by scanning /proc/iomem for actual "System RAM".
Link: https://lkml.kernel.org/r/20250528195244.1182810-1-david@redhat.com
Fixes: 2616b370323a ("selftests/mm: add simple VM_PFNMAP tests based on mmap'ing /dev/mem")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/all/232960c2-81db-47ca-a337-38c4bce5f997@arm.com/T/#u
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The madv_populate selftest has some repetitive code for several different
cases that it covers, included repeated test names used in
ksft_test_result() reports. This causes problems for automation, the test
name is used to both track the test between runs and distinguish between
multiple tests within the same run. Fix this by tweaking the messages
with duplication to be more specific about the contexts they're in.
Link: https://lkml.kernel.org/r/20250522-selftests-mm-madv-populate-dedupe-v1-1-fd1dedd79b4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When running hugevm tests in a machine without kernel config present,
e.g., a VM running a kernel without CONFIG_IKCONFIG_PROC nor
/boot/config-*, skip hugevm tests, which reads kernel config to get page
table level information.
Link: https://lkml.kernel.org/r/20250516132938.356627-3-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Adam Sindelar <adam@wowsignal.io>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Skip mm selftests instead when kernel features are not
present", v2.
Two guard_regions tests on userfaultfd fail when userfaultfd is not
present. Skip them instead.
hugevm test reads kernel config to get page table level information and
fails when neither /proc/config.gz nor /boot/config-* is present. Skip it
instead.
This patch (of 2):
When userfaultfd is not compiled into kernel, userfaultfd() returns -1,
causing guard_regions.uffd tests to fail. Skip the tests instead.
Link: https://lkml.kernel.org/r/20250516132938.356627-1-ziy@nvidia.com
Link: https://lkml.kernel.org/r/20250516132938.356627-2-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Adam Sindelar <adam@wowsignal.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The thuge-gen test program runs mmap() and shmget() tests for both every
available page size and the default page size, resulting in two tests for
the default size. These tests are distinct since the flags in the default
case do not specify an explicit size, add the flags to the test name that
is logged to deduplicate.
Link: https://lkml.kernel.org/r/20250515-selfests-mm-thuge-gen-dup-v1-1-057d2836553f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dev Jain <dev.jain@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The mlock2-tests test_mlock_lock() test reports two test results with an
identical string, one reporitng if it successfully locked a block of
memory and another reporting if the lock is still present after doing an
unlock (following a similar pattern to other tests in the same program).
This confuses test automation since the test string is used to deduplicate
tests, change the post unlock test to report "Unlocked" instead like the
other tests to fix this.
Link: https://lkml.kernel.org/r/20250515-selftest-mm-mlock2-dup-v1-1-963d5d7d243a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dev Jain <dev.jain@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
|
|
Add a new test_stress_06 for the per io daemons feature. This is just a
copy of test_stress_01 with the per_io_tasks flag added, with varying
amounts of nthreads. This test is able to reproduce a panic which was
caught manually during development [1]; in the current version of this
patch set, it passes.
Note that this commit also makes all stress tests using the
run_io_and_remove helper more stressful by additionally exercising the
batch submit (queue_rqs) path.
[1] https://lore.kernel.org/linux-block/aDgwGoGCEpwd1mFY@fedora/
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-8-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new test test_generic_12 which:
- sets up a ublk server with per_io_tasks and a different number of ublk
server threads and ublk_queues. This is possible now that these
objects are decoupled
- runs some I/O load from a single CPU
- verifies that all the ublk server threads handle some I/O
Before this changeset, this test fails, since I/O issued from one CPU is
always handled by the one ublk server thread. After this changeset, the
test passes.
In the future, the last check above may be strengthened to "verify that
all ublk server threads handle the same amount of I/O." However, this
requires some adjustments/bugfixes to tag allocation, so this work is
postponed to a followup.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-7-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support in kublk for decoupled ublk_queues and ublk server threads.
kublk now has two modes of operation:
- (preexisting mode) threads and queues are paired 1:1, and each thread
services all the I/Os of one queue
- (new mode) thread and queue counts are independently configurable.
threads service I/Os in a way that balances load across threads even
if load is not balanced over queues.
The default is the preexisting mode. The new mode is activated by
passing the --per_io_tasks flag.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-6-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Towards the goal of decoupling ublk_queues from ublk server threads,
move resources/data that should be per-thread rather than per-queue out
of ublk_queue and into a new struct ublk_thread.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-5-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, each ublk server I/O handler thread initializes its own
queue. However, as we move towards decoupled ublk_queues and ublk server
threads, this model does not make sense anymore, as there will no longer
be a concept of a thread having "its own" queue. So lift queue
initialization out of the per-thread ublk_io_handler_fn and into a loop
in ublk_start_daemon (which runs once for each device).
There is a part of ublk_queue_init (ring initialization) which does
actually need to happen on the thread that will use the ring; that is
separated into a separate ublk_thread_init which is still called by each
I/O handler thread.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-4-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently have a helper ublk_queue_alloc_sqes which the ublk targets
use to allocate SQEs for their own operations. However, as we move
towards decoupled ublk_queues and ublk server threads, this helper does
not make sense anymore. SQEs are allocated from rings, and we will have
one ring per thread to avoid locking. Change the SQE allocation helper
to ublk_io_alloc_sqes. Currently this still allocates SQEs from the io's
queue's ring, but when we fully decouple threads and queues, it will
allocate from the io's thread's ring instead.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-3-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, when we process CQEs, we know which ublk_queue we are working
on because we know which ring we are working on, and ublk_queues and
rings are in 1:1 correspondence. However, as we decouple ublk_queues
from ublk server threads, ublk_queues and rings will no longer be in 1:1
correspondence - each ublk server thread will have a ring, and each
thread may issue commands against more than one ublk_queue. So in order
to know which ublk_queue a CQE refers to, plumb that information in the
associated SQE's user_data.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-2-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The newly added anon_inode_test test fails to build due to attempting to
include a nonexisting overlayfs/wrapper.h:
anon_inode_test.c:10:10: fatal error: overlayfs/wrappers.h: No such file or directory
10 | #include "overlayfs/wrappers.h"
| ^~~~~~~~~~~~~~~~~~~~~~
This is due to 0bd92b9fe538 ("selftests/filesystems: move wrapper.h out
of overlayfs subdir") which was added in the vfs-6.16.selftests branch
which was based on -rc5 and did not contain the newly added test so once
things were merged into mainline the build started failing - both parent
commits are fine.
Fixes: 3e406741b1989 ("Merge tag 'vfs-6.16-rc1.selftests' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.
- Use a new tracer_tracing_disable/enable() instead of data->disable
flag
There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace
functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...
|
|
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c42a ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
|
