| Age | Commit message (Collapse) | Author |
|---|
|
Skip an event configuration for event names with a dash/minus in them.
Events with a dash/minus in their name cause parsing issues as legacy
encoding of events would use a dash/minus as a separator.
The parser separates events with dashes into prefixes and suffixes and
then recombines them. Unfortunately if an event has part of its name
that matches a legacy token then the recombining fails.
This is seen for branch-brs where branch is a legacy token. branch-brs
was introduced to sysfs in:
https://lore.kernel.org/all/20220322221517.2510440-5-eranian@google.com/
The failure is shown below as well as the workaround to use a config
where the dash/minus isn't treated specially:
```
$ perf stat -e branch-brs true
event syntax error: 'branch-brs'
\___ parser error
$ perf stat -e cpu/branch-brs/ true
Performance counter stats for 'true':
46,179 cpu/branch-brs/
```
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20221013011205.3151391-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Needed to get the event_attr_init() and perf_event_paranoid() prototypes
that were being obtained indirectly, by sheer luck.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Those headers are not needed in util/mmap.h, remove them.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It uses things like perf_event__name() but were not including event.h,
where its prototype lives, fix it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Its a thread method, so move it to thread.h, this way some places that
were using event.h just to get this prototype may stop doing so and
speed up building and disentanble the header dependency graph.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Its a addr_location method, so move it to symbol.h, where 'struct
addr_location' is, this way some places that were using event.h just to
get this prototype may stop doing so and speed up building and
disentanble the header dependency graph.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Its a machine method, so move it to machine.h, this way some places that
were using event.h just to get this prototype may stop doing so and
speed up building and disentanble the header dependency graph.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Leave just some forward declarations for pointers, move the includes to
where they are really needed.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
disentangle headers
Some places were including event.h just to get 'struct perf_sample',
move it to a separate place so that we speed up a bit the build.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
map_symbol.h is needed because we have structs that contains 'struct
addr_map_symbol', so add it, remove the others.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the bpf-prologue.h header we are just using pointers, so no need to
include headers for that, just provide forward declarations for those
types.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
E.g. all the hw_breakpoint tests are failing right now.
So if I run `kunit.py run --altests --arch=x86_64`, then I see
> Testing complete. Ran 408 tests: passed: 392, failed: 9, skipped: 7
Seeing which 9 tests failed out of the hundreds is annoying.
If my terminal doesn't have scrollback support, I have to resort to
looking at `.kunit/test.log` for the `not ok` lines.
Teach kunit.py to print a summarized list of failures if the # of tests
reachs an arbitrary threshold (>=100 tests).
To try and keep the output from being too long/noisy, this new logic
a) just reports "parent_test failed" if every child test failed
b) won't print anything if there are >10 failures (also arbitrary).
With this patch, we get an extra line of output showing:
> Testing complete. Ran 408 tests: passed: 392, failed: 9, skipped: 7
> Failures: hw_breakpoint
This also works with parameterized tests, e.g. if I add a fake failure
> Failures: kcsan.test_atomic_builtins_missing_barrier.threads=6
Note: we didn't have enough tests for this to be a problem before.
But with commit 980ac3ad0512 ("kunit: tool: rename all_test_uml.config,
use it for --alltests"), --alltests works and thus running >100 tests
will probably become more common.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, if you run
$ ./tools/testing/kunit/kunit_tool_test.py
you'll see a lot of output from the parser as we feed it testdata.
This makes the output hard to read and fairly confusing, esp. since our
testdata includes example failures, which get printed out in red.
Silence that output so real failures are easier to see.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Remove the completed items from TODO list.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20221011062128.49359-4-shaoqin.huang@intel.com
|
|
Reserve 129th region in the memblock, and this will trigger the
memblock_double_array() function, this needs valid memory regions. So
using dummy_physical_memory_init() to allocate a valid memory region.
At the same time, reserve 128 faked memory region, and make sure these
reserved region not intersect with the valid memory region. So
memblock_double_array() will choose the valid memory region, and it will
success.
Also need to restore the reserved.regions after memblock_double_array(),
to make sure the subsequent tests can run as normal.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20221011062128.49359-3-shaoqin.huang@intel.com
|
|
Add 129th region into the memblock, and this will trigger the
memblock_double_array() function, this needs valid memory regions. So
using dummy_physical_memory_init() to allocate a large enough memory
region, and split it into a large enough memory which can be choosed by
memblock_double_array(), and the left memory will be split into small
memory region, and add them into the memblock. It make sure the
memblock_double_array() will always choose the valid memory region that
is allocated by the dummy_physical_memory_init().
So memblock_double_array() must success.
Another thing should be done is to restore the memory.regions after
memblock_double_array(), due to now the memory.regions is pointing to a
memory region allocated by dummy_physical_memory_init(). And it will
affect the subsequent tests if we don't restore the memory region. So
simply record the origin region, and restore it after the test.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20221011062128.49359-2-shaoqin.huang@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Some small driver fixes for 6.1-rc3. They include:
- iio driver bugfixes
- counter driver bugfixes
- coresight bugfixes, including a revert and then a second fix to get
it right.
All of these have been in linux-next with no reported problems"
* tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
misc: sgi-gru: use explicitly signed char
coresight: cti: Fix hang in cti_disable_hw()
Revert "coresight: cti: Fix hang in cti_disable_hw()"
counter: 104-quad-8: Fix race getting function mode and direction
counter: microchip-tcb-capture: Handle Signal1 read and Synapse
coresight: cti: Fix hang in cti_disable_hw()
coresight: Fix possible deadlock with lock dependency
counter: ti-ecap-capture: fix IS_ERR() vs NULL check
counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
iio: bmc150-accel-core: Fix unsafe buffer attributes
iio: adxl367: Fix unsafe buffer attributes
iio: adxl372: Fix unsafe buffer attributes
iio: at91-sama5d2_adc: Fix unsafe buffer attributes
iio: temperature: ltc2983: allocate iio channels once
tools: iio: iio_utils: fix digit calculation
iio: adc: stm32-adc: fix channel sampling time init
iio: adc: mcp3911: mask out device ID in debug prints
iio: adc: mcp3911: use correct id bits
iio: adc: mcp3911: return proper error code on failure to allocate trigger
iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug
...
|
|
Fix warnings and enable Wall.
pidfd_wait.c: In function ‘wait_nonblock’:
pidfd_wait.c:150:13: warning: unused variable ‘status’ [-Wunused-variable]
150 | int pidfd, status = 0;
| ^~~~~~
...
pidfd_test.c: In function ‘child_poll_exec_test’:
pidfd_test.c:438:1: warning: no return statement in function returning non-void [-Wreturn-type]
438 | }
| ^
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
v2: fix mistake assignment to pidfd
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
0Day/LKP observed that the kselftest blocks forever since one of the
pidfd_wait doesn't terminate in 1 of 30 runs. After digging into
the source, we found that it blocks at:
ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WCONTINUED, NULL), 0);
wait_states has below testing flow:
CHILD PARENT
---------------+--------------
1 STOP itself
2 WAIT for CHILD STOPPED
3 SIGNAL CHILD to CONT
4 CONT
5 STOP itself
5' WAIT for CHILD CONT
6 WAIT for CHILD STOPPED
The problem is that the kernel cannot ensure the order of 5 and 5', once
5 goes first, the test will fail.
we can reproduce it by:
$ while true; do make run_tests -C pidfd; done
Introduce a blocking read in child process to make sure the parent can
check its WCONTINUED.
CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These make the intel_pstate driver work as expected on all hybrid
platforms to date (regardless of possible platform firmware issues),
fix hybrid sleep on systems using suspend-to-idle by default, make the
generic power domains code handle disabled idle states properly and
update pm-graph.
Specifics:
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki)
- Allow hybrid sleep to use suspend-to-idle as a system suspend
method if it is the current suspend method of choice (Mario
Limonciello)
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla)
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt)"
* tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Fix handling of unavailable/disabled idle states
pm-graph v5.10
cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores
cpufreq: intel_pstate: Read all MSRs on the target CPU
PM: hibernate: Allow hybrid sleep to work with s2idle
|
|
Paul and I got trapped a few times by not seeing the effects of applying
a patch to the nolibc source code until a "make clean" was issued in
the nolibc directory. It's particularly annoying when trying to confirm
that a proposed patch really solves a problem (or that reverting it
reintroduces the problem).
The reason for the sysroot not being rebuilt was that it can be quite
slow. But in fact it's only slow after a "make clean" issued at the
kernel's topdir, because it's the main "make headers" that can take a
tens of seconds; as long as "usr/include" still contains headers, the
"headers_install" phase is only a quick "rsync", and rebuilding the
whole nolibc sysroot takes a bit less than one second, which is perfectly
acceptable for a test, even more once the time lost caused by misleading
results is factored in.
This patch marks the sysroot target as phony and starts by clearing
the previous sysroot for the current architecture before reinstalling
it. Thanks to this, applying a patch to nolibc makes the effect
immediately visible to "make nolibc-test":
$ time make -j -C tools/testing/selftests/nolibc nolibc-test
make: Entering directory '/k/tools/testing/selftests/nolibc'
MKDIR sysroot/x86/include
make[1]: Entering directory '/k/tools/include/nolibc'
make[2]: Entering directory '/k'
make[2]: Leaving directory '/k'
make[2]: Entering directory '/k'
INSTALL /k/tools/testing/selftests/nolibc/sysroot/sysroot/include
make[2]: Leaving directory '/k'
make[1]: Leaving directory '/k/tools/include/nolibc'
CC nolibc-test
make: Leaving directory '/k/tools/testing/selftests/nolibc'
real 0m0.869s
user 0m0.716s
sys 0m0.149s
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20221021155645.GK5600@paulmck-ThinkPad-P17-Gen-1/
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This adds 7 combinations of input values for memcmp() using signed and
unsigned bytes, which will trigger on the original code before Rasmus'
fix. This is mostly aimed at helping backporters verify their work, and
showing how tests for corner cases can be added to the selftests suite.
Before the fix it reports:
12 memcmp_20_20 = 0 [OK]
13 memcmp_20_60 = -64 [OK]
14 memcmp_60_20 = 64 [OK]
15 memcmp_20_e0 = 64 [FAIL]
16 memcmp_e0_20 = -64 [FAIL]
17 memcmp_80_e0 = -96 [OK]
18 memcmp_e0_80 = 96 [OK]
And after:
12 memcmp_20_20 = 0 [OK]
13 memcmp_20_60 = -64 [OK]
14 memcmp_60_20 = 64 [OK]
15 memcmp_20_e0 = -192 [OK]
16 memcmp_e0_20 = 192 [OK]
17 memcmp_80_e0 = -96 [OK]
18 memcmp_e0_80 = 96 [OK]
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The C standard says that memcmp() must treat the buffers as consisting
of "unsigned chars". If char happens to be unsigned, the casts are ok,
but then obviously the c1 variable can never contain a negative
value. And when char is signed, the casts are wrong, and there's still
a problem with using an 8-bit quantity to hold the difference, because
that can range from -255 to +255.
For example, assuming char is signed, comparing two 1-byte buffers,
one containing 0x00 and another 0x80, the current implementation would
return -128 for both memcmp(a, b, 1) and memcmp(b, a, 1), whereas one
of those should of course return something positive.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When built at -Os, gcc-12 recognizes an strlen() pattern in nolibc_strlen()
and replaces it with a jump to strlen(), which is not defined as a symbol
and breaks compilation. Worse, when the function is called strlen(), the
function is simply replaced with a jump to itself, hence becomes an
infinite loop.
One way to avoid this is to always set -ffreestanding, but the calling
code doesn't know this and there's no way (either via attributes or
pragmas) to globally enable it from include files, effectively leaving
a painful situation for the caller.
Alexey suggested to place an empty asm() statement inside the loop to
stop gcc from recognizing a well-known pattern, which happens to work
pretty fine. At least it allows us to make sure our local definition
is not replaced with a self jump.
The function only needs to be renamed back to strlen() so that the symbol
exists, which implies that nolibc_strlen() which is used on variable
strings has to be declared as a macro that points back to it before the
strlen() macro is redifined.
It was verified to produce valid code with gcc 3.4 to 12.1 at different
optimization levels, and both with constant and variable strings.
In case this problem surfaces again in the future, an alternate approach
consisting in adding an optimize("no-tree-loop-distribute-patterns")
function attribute for gcc>=12 worked as well but is less pretty.
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081618.754a77db-yujie.liu@intel.com
Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc")
Fixes: 96980b833a21 ("tools/nolibc/string: do not use __builtin_strlen() at -O0")
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
ACPICA commit 8ac4e5116f59d6f9ba2fbeb9ce22ab58237a278f
Finish support for the CDAT table, in both the data table compiler and
the disassembler.
Link: https://github.com/acpica/acpica/commit/8ac4e511
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Tag "guest_saw_irq" as "volatile" to ensure that the compiler will never
optimize away lookups. Relying on the compiler thinking that the flag
is global and thus might change also works, but it's subtle, less robust,
and looks like a bug at first glance, e.g. risks being "fixed" and
breaking the test.
Make the flag "static" as well since convincing the compiler it's global
is no longer necessary.
Alternatively, the flag could be accessed with {READ,WRITE}_ONCE(), but
literally every access would need the wrappers, and eking out performance
isn't exactly top priority for selftests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Tests for races between shinfo_cache (de)activation and hypercall+ioctl()
processing. KVM has had bugs where activating the shared info cache
multiple times and/or with concurrent users results in lock corruption,
NULL pointer dereferences, and other fun.
For the timer injection testcase (#22), re-arm the timer until the IRQ
is successfully injected. If the timer expires while the shared info
is deactivated (invalid), KVM will drop the event.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
dependency
Now that we have a good way to specify dependency of tests on programs,
convert some of the tracer tests to use this method for specifying
dependency on 'chrt'.
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
All these tests depend on the ping command and will fail if it is not
found. Allow tests to specify dependencies on programs through the
'requires' field. Add dependency on 'ping' for some of the trigger
tests.
Link: https://lore.kernel.org/all/20221017104312.16af5467@gandalf.local.home/
Reported-by: Akanksha J N <akanksha@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion")
abb8670938b2 ("can: kvaser_usb_leaf: Ignore stale bus-off after start")
8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from 802.15.4 (Zigbee et al).
Current release - regressions:
- ipa: fix bugs in the register conversion for IPA v3.1 and v3.5.1
Current release - new code bugs:
- mptcp: fix abba deadlock on fastopen
- eth: stmmac: rk3588: allow multiple gmac controllers in one system
Previous releases - regressions:
- ip: rework the fix for dflt addr selection for connected nexthop
- net: couple more fixes for misinterpreting bits in struct page
after the signature was added
Previous releases - always broken:
- ipv6: ensure sane device mtu in tunnels
- openvswitch: switch from WARN to pr_warn on a user-triggerable path
- ethtool: eeprom: fix null-deref on genl_info in dump
- ieee802154: more return code fixes for corner cases in
dgram_sendmsg
- mac802154: fix link-quality-indicator recording
- eth: mlx5: fixes for IPsec, PTP timestamps, OvS and conntrack
offload
- eth: fec: limit register access on i.MX6UL
- eth: bcm4908_enet: update TX stats after actual transmission
- can: rcar_canfd: improve IRQ handling for RZ/G2L
Misc:
- genetlink: piggy back on the newly added resv_op_start to enforce
more sanity checks on new commands"
* tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
net: enetc: survive memory pressure without crashing
kcm: do not sense pfmemalloc status in kcm_sendpage()
net: do not sense pfmemalloc status in skb_append_pagefrags()
net/mlx5e: Fix macsec sci endianness at rx sa update
net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
net/mlx5e: Fix macsec rx security association (SA) update/delete
net/mlx5e: Fix macsec coverity issue at rx sa update
net/mlx5: Fix crash during sync firmware reset
net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
net/mlx5e: TC, Reject forwarding from internal port to internal port
net/mlx5: Fix possible use-after-free in async command interface
net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
net/mlx5e: Update restore chain id for slow path packets
net/mlx5e: Extend SKB room check to include PTP-SQ
net/mlx5: DR, Fix matcher disconnect error flow
net/mlx5: Wait for firmware to enable CRS before pci_restore_state
net/mlx5e: Do not increment ESN when updating IPsec ESN state
netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed
netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed
...
|
|
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the global quiet variable everywhere so that all tools hide warnings
in quiet mode and update the documentation to reflect this.
'perf probe' claimed that errors are not printed in quiet mode but I
don't see this so remove it from the docs.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221018094137.783081-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
warnings in quiet mode
Especially when CONFIG_LOCKDEP and other debug configs are enabled,
Perf can print the following warning when running the "kernel lock
contention analysis" test:
Warning:
Processed 1378918 events and lost 4 chunks!
Check IO/CPU overload!
Warning:
Processed 4593325 samples and lost 70.00%!
The test already supplies -q to run in quiet mode, so extend quiet mode
to perf_stdio__warning() and also ui__warning() for consistency.
This fixes the following failure due to the extra lines counted:
perf test "lock cont" -vvv
82: kernel lock contention analysis test :
--- start ---
test child forked, pid 3125
Testing perf lock record and perf lock contention
[Fail] Recorded result count is not 1: 9
test child finished with -1
---- end ----
kernel lock contention analysis test: FAILED!
Fixes: ec685de25b6718f8 ("perf test: Add kernel lock contention test")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221018094137.783081-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It now has 4 sub tests and at least one of them should run.
But once the TEST_SKIP (= 2) return value is set, it won't be
overwritten unless there's a failure. I think we should return success
when one or more tests are skipped but the remaining subtests are
passed.
So update the test code not to set the err variable when it skips
the test.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The --threads option changed the 'perf record' behavior significantly,
so it'd be nice if we test it separately. Add --threads options with
different argument in each test supported and check the result.
Also update the cleanup routine because threads recording produces data
in a directory.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a subtest which profiles the given workload on the command line.
As it's a minimal requirement, the test should run ok so it doesn't skip
the test even if it failed to run the 'perf record' command.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add system wide recording test with the same pattern. It'd skip the
test when it fails to run 'perf record'.
For system-wide mode, it needs to avoid build-id collection and
synthesis because the test only cares about the test program and kernel
would generate the necessary events as the process starts.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Just running the target program is not enough to test multi-thread
target because it'd be racy perf vs target startup. I used the
initial delay but it cannot guarantee for perf to see the thread.
Instead, use wait_for_threads helper from shell/lib/waiting.sh to make
sure it starts the sibling thread first. Then perf record can use -p
option to profile the target process.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If the system has cc it could build a test program with two threads
and then use it for more detailed testing. Also it accepts an option
to run a thread forever to ensure multi-thread runs.
If cc is not found, it falls back to use the default value 'true'.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Basically there are 3 issues:
1. quote shell expansion
2. do not use egrep
3. use upper case letters for signal names
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I think it's to support non-root user tests. But perf record can handle
the case and fall back to a software event (cpu-clock). Practically this
would affect when it's run on a VM, but it seems no reason to prevent running
the test in the guest.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Intel PT timestamps are not provided for every branch, let alone every
instruction, so there can be many samples with the same timestamp. With
per-cpu contexts, decoding is done for each CPU in turn, which can make it
difficult to see what is happening on different CPUs at the same time.
Currently the interleaving from perf script --itrace=i0ns is quite coarse
grained. There are often long stretches executing on one CPU and nothing on
another.
Some people are interested in seeing what happened on multiple CPUs before
a crash to debug races etc.
To improve perf script interleaving for parallel execution, the
intel-pt-events.py script has been enhanced to enable interleaving the
output with the same timestamp from different CPUs. It is understood that
interleaving is not perfect or causal.
Add parameter --interleave [<n>] to interleave sample output for the same
timestamp so that no more than n samples for a CPU are displayed in a row.
'n' defaults to 4. Note this only affects the order of output, and only
when the timestamp is the same.
Example:
$ perf script intel-pt-events.py --insn-trace --interleave 3
...
bash 2267/2267 [004] 9323.692625625 563caa3c86f0 jz 0x563caa3c89c7 run_pending_traps+0x30 (/usr/bin/bash) IPC: 1.52 (38/25)
bash 2267/2267 [004] 9323.692625625 563caa3c89c7 movq 0x118(%rsp), %rax run_pending_traps+0x307 (/usr/bin/bash)
bash 2267/2267 [004] 9323.692625625 563caa3c89cf subq %fs:0x28, %rax run_pending_traps+0x30f (/usr/bin/bash)
bash 2270/2270 [007] 9323.692625625 55dc58cabf02 jz 0x55dc58cabf48 unquoted_glob_pattern_p+0x102 (/usr/bin/bash) IPC: 1.56 (25/16)
bash 2270/2270 [007] 9323.692625625 55dc58cabf04 cmp $0x5d, %al unquoted_glob_pattern_p+0x104 (/usr/bin/bash)
bash 2270/2270 [007] 9323.692625625 55dc58cabf06 jnz 0x55dc58cabf10 unquoted_glob_pattern_p+0x106 (/usr/bin/bash)
bash 2264/2264 [001] 9323.692625625 7fd556a4376c jbe 0x7fd556a43ac8 round_and_return+0x3fc (/usr/lib/x86_64-linux-gnu/libc.so.6) IPC: 4.30 (43/10)
bash 2264/2264 [001] 9323.692625625 7fd556a43772 and $0x8, %edx round_and_return+0x402 (/usr/lib/x86_64-linux-gnu/libc.so.6)
bash 2264/2264 [001] 9323.692625625 7fd556a43775 jnz 0x7fd556a43ac8 round_and_return+0x405 (/usr/lib/x86_64-linux-gnu/libc.so.6)
bash 2267/2267 [004] 9323.692625625 563caa3c89d8 jnz 0x563caa3c8b11 run_pending_traps+0x318 (/usr/bin/bash)
bash 2267/2267 [004] 9323.692625625 563caa3c89de add $0x128, %rsp run_pending_traps+0x31e (/usr/bin/bash)
bash 2267/2267 [004] 9323.692625625 563caa3c89e5 popq %rbx run_pending_traps+0x325 (/usr/bin/bash)
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221020152509.5298-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since commit c897899752478d4c ("perf tools: Prevent out-of-bounds access
to registers") the util/event.h header doesn't use anything from
util/perf_regs.h, so drop it to untangle the header dependency tree a
bit, speeding up compilation.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_reg_name() prototype
It was getting it via event.h, that doesn't need that include anymore
and will drop it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It was getting indirectly, out of luck, add it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To reduce compile time and header dependency chains just add forward
declarations for pointer types and include linux/types.h for u64.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add missing newline on pr_warning() call in home_perfconfig().
Before:
# perf record
File /home/yangjihong/.perfconfig not owned by current user or root, ignoring it.Couldn't synthesize bpf events.
After:
# perf record
File /home/yangjihong/.perfconfig not owned by current user or root, ignoring it.
Couldn't synthesize bpf events.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221022092735.114967-4-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf daemon supports start, signal, stop and ping subcommands, complete it
Before:
# perf daemon -h
Usage: perf daemon start [<options>]
or: perf daemon [<options>]
-v, --verbose be more verbose
-x, --field-separator[=<field separator>]
print counts with custom separator
--base <directory>
base directory
--config <config file>
config file path
After:
# perf daemon -h
Usage: perf daemon {start|signal|stop|ping} [<options>]
or: perf daemon [<options>]
-v, --verbose be more verbose
-x, --field-separator[=<field separator>]
print counts with custom separator
--base <directory>
base directory
--config <config file>
config file path
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221022092735.114967-3-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The aggr field in the struct perf_counts is to keep the aggregated value
in the AGGR_GLOBAL for the old code. But it's not used anymore.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221018020227.85905-21-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
