summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2018-02-24tools/kvm_stat: eliminate extra guest/pid selection dialogStefan Raspl
We can do with a single dialog that takes both, pids and guest names. Note that we keep both interactive commands, 'p' and 'g' for now, to avoid confusion among users used to a specific key. While at it, we improve on some minor glitches regarding curses usage, e.g. cursor still visible when not supposed to be. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: mark private methods as suchStefan Raspl
Helps quite a bit reading the code when it's obvious when a method is intended for internal use only. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: fix debugfs handlingStefan Raspl
Te checks for debugfs assumed that debugfs is always mounted at /sys/kernel/debug - which is likely, but not guaranteed. This is addressed by checking /proc/mounts for the actual location. Furthermore, when debugfs was mounted, but the kvm module not loaded, a misleading error pointing towards debugfs not present was given. To reproduce, (a) run kvm_stat with debugfs mounted at a place different from /sys/kernel/debug (b) run kvm_stat with debugfs mounted but kvm module not loaded Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: print error on invalid regexStefan Raspl
Entering an invalid regular expression did not produce any indication of an error so far. To reproduce, press 'f' and enter 'foo(' (with an unescaped bracket). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: fix crash when filtering out all non-child trace eventsStefan Raspl
When we apply a filter that will only leave child trace events, we receive a ZeroDivisionError when calculating the percentages. In that case, provide percentages based on child events only. To reproduce, run 'kvm_stat -f .*[\(].*'. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: avoid 'is' for equality checksMarc Hartmayer
Use '==' for equality checks and 'is' when comparing identities. An example where '==' and 'is' behave differently: >>> a = 4242 >>> a == 4242 True >>> a is 4242 False Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: use a more pythonic way to iterate over dictionariesMarc Hartmayer
If it's clear that the values of a dictionary will be used then use the '.items()' method. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> [Include fix for logging mode by Stefan Raspl] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: use a namedtuple for storing the valuesMarc Hartmayer
Use a namedtuple for storing the values as it allows to access the fields of a tuple via names. This makes the overall code much easier to read and to understand. Access by index is still possible as before. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: simplify the sortkey functionMarc Hartmayer
The 'sortkey' function references a value in its enclosing scope (closure). This is not common practice for a sort key function so let's replace it. Additionally, the function 'sorted' has already a parameter for reversing the result therefore the inversion of the values is unneeded. The check for stats[x][1] is also superfluous as it's ensured that this value is initialized with 0. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-23Merge branches 'fixes.2018.02.23a', 'srcu.2018.02.20a' and ↵Paul E. McKenney
'torture.2018.02.20a' into HEAD fixes.2018.02.23a: Miscellaneous fixes srcu.2018.02.20a: SRCU updates torture.2018.02.20a: Torture-test updates
2018-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh. 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang. 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song. 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang. 5) Fix potential deadlocks in netfilter getsockopt() code paths, from Paolo Abeni. 6) Netfilter stackpointer size checks really are needed to validate user input, from Florian Westphal. 7) Missing timer init in x_tables, from Paolo Abeni. 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg. 9) When an ibmvnic device is brought down then back up again, it can be sent queue entries from a previous session, handle this properly instead of crashing. From Thomas Falcon. 10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman. 11) When we are dumping filters in cls_api, the output SKB is empty, and the filter we are dumping is too large for the space in the SKB, we should return -EMSGSIZE like other netlink dump operations do. Otherwise userland has no signal that is needs to increase the size of its read buffer. From Roman Kapl. 12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer. 13) Module refcount leak in netlink when a dump start fails, from Jason Donenfeld. 14) Handle sub-optimal GSO sizes better in TCP BBR congestion control, from Eric Dumazet. 15) Releasing bpf per-cpu arraymaps can take a long time, add a condtional scheduling point. From Eric Dumazet. 16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From Daniel Borkmann. 17) Fix page leak in gianfar driver, from Andy Spencer. 18) Missed clearing of estimator scratch buffer, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net_sched: gen_estimator: fix broken estimators based on percpu stats gianfar: simplify FCS handling and fix memory leak ipv6 sit: work around bogus gcc-8 -Wrestrict warning macvlan: fix use-after-free in macvlan_common_newlink() bpf, arm64: fix out of bounds access in tail call bpf, x64: implement retpoline for tail call rxrpc: Fix send in rxrpc_send_data_packet() net: aquantia: Fix error handling in aq_pci_probe() bpf: fix rcu lockdep warning for lpm_trie map_free callback bpf: add schedule points in percpu arrays management regulatory: add NUL to request alpha2 ibmvnic: Fix early release of login buffer net/smc9194: Remove bogus CONFIG_MAC reference net: ipv4: Set addr_type in hash_keys for forwarded case tcp_bbr: better deal with suboptimal GSO smsc75xx: fix smsc75xx_set_features() netlink: put module reference if dump start fails selftests/bpf/test_maps: exit child process without error in ENOMEM case selftests/bpf: update gitignore with test_libbpf_open selftests/bpf: tcpbpf_kern: use in6_* macros from glibc ..
2018-02-23Merge branch 'fixes-v4.16-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: - keys fixes via David Howells: "A collection of fixes for Linux keyrings, mostly thanks to Eric Biggers: - Fix some PKCS#7 verification issues. - Fix handling of unsupported crypto in X.509. - Fix too-large allocation in big_key" - Seccomp updates via Kees Cook: "These are fixes for the get_metadata interface that landed during -rc1. While the new selftest is strictly not a bug fix, I think it's in the same spirit of avoiding bugs" - an IMA build fix from Randy Dunlap * 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: integrity/security: fix digsig.c build error with header file KEYS: Use individual pages in big_key for crypto buffers X.509: fix NULL dereference when restricting key with unsupported_sig X.509: fix BUG_ON() when hash algorithm is unsupported PKCS#7: fix direct verification of SignerInfo signature PKCS#7: fix certificate blacklisting PKCS#7: fix certificate chain verification seccomp: add a selftest for get_metadata ptrace, seccomp: tweak get_metadata behavior slightly seccomp, ptrace: switch get_metadata types to arch independent
2018-02-23bpf: allow xadd only on aligned memoryDaniel Borkmann
The requirements around atomic_add() / atomic64_add() resp. their JIT implementations differ across architectures. E.g. while x86_64 seems just fine with BPF's xadd on unaligned memory, on arm64 it triggers via interpreter but also JIT the following crash: [ 830.864985] Unable to handle kernel paging request at virtual address ffff8097d7ed6703 [...] [ 830.916161] Internal error: Oops: 96000021 [#1] SMP [ 830.984755] CPU: 37 PID: 2788 Comm: test_verifier Not tainted 4.16.0-rc2+ #8 [ 830.991790] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.29 07/17/2017 [ 830.998998] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 831.003793] pc : __ll_sc_atomic_add+0x4/0x18 [ 831.008055] lr : ___bpf_prog_run+0x1198/0x1588 [ 831.012485] sp : ffff00001ccabc20 [ 831.015786] x29: ffff00001ccabc20 x28: ffff8017d56a0f00 [ 831.021087] x27: 0000000000000001 x26: 0000000000000000 [ 831.026387] x25: 000000c168d9db98 x24: 0000000000000000 [ 831.031686] x23: ffff000008203878 x22: ffff000009488000 [ 831.036986] x21: ffff000008b14e28 x20: ffff00001ccabcb0 [ 831.042286] x19: ffff0000097b5080 x18: 0000000000000a03 [ 831.047585] x17: 0000000000000000 x16: 0000000000000000 [ 831.052885] x15: 0000ffffaeca8000 x14: 0000000000000000 [ 831.058184] x13: 0000000000000000 x12: 0000000000000000 [ 831.063484] x11: 0000000000000001 x10: 0000000000000000 [ 831.068783] x9 : 0000000000000000 x8 : 0000000000000000 [ 831.074083] x7 : 0000000000000000 x6 : 000580d428000000 [ 831.079383] x5 : 0000000000000018 x4 : 0000000000000000 [ 831.084682] x3 : ffff00001ccabcb0 x2 : 0000000000000001 [ 831.089982] x1 : ffff8097d7ed6703 x0 : 0000000000000001 [ 831.095282] Process test_verifier (pid: 2788, stack limit = 0x0000000018370044) [ 831.102577] Call trace: [ 831.105012] __ll_sc_atomic_add+0x4/0x18 [ 831.108923] __bpf_prog_run32+0x4c/0x70 [ 831.112748] bpf_test_run+0x78/0xf8 [ 831.116224] bpf_prog_test_run_xdp+0xb4/0x120 [ 831.120567] SyS_bpf+0x77c/0x1110 [ 831.123873] el0_svc_naked+0x30/0x34 [ 831.127437] Code: 97fffe97 17ffffec 00000000 f9800031 (885f7c31) Reason for this is because memory is required to be aligned. In case of BPF, we always enforce alignment in terms of stack access, but not when accessing map values or packet data when the underlying arch (e.g. arm64) has CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS set. xadd on packet data that is local to us anyway is just wrong, so forbid this case entirely. The only place where xadd makes sense in fact are map values; xadd on stack is wrong as well, but it's been around for much longer. Specifically enforce strict alignment in case of xadd, so that we handle this case generically and avoid such crashes in the first place. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-23selftests/net: ignore background traffic in psock_fanoutWillem de Bruijn
The packet fanout test generates UDP traffic and reads this with a pair of packet sockets, testing the various fanout algorithms. Avoid non-determinism from reading unrelated background traffic. Fanout decisions are made before unrelated packets can be dropped with a filter, so that is an insufficient strategy [*]. Run the packet socket tests in a network namespace, similar to msg_zerocopy. It it still good practice to install a filter on a packet socket before accepting traffic. Because this is example code, demonstrate that pattern. Open the socket initially bound to no protocol, install a filter, and only then bind to ETH_P_IP. Another source of non-determinism is hash collisions in FANOUT_HASH. The hash function used to select a socket in the fanout group includes the pseudorandom number hashrnd, which is not visible from userspace. To work around this, the test tries to find a pair of UDP source ports that do not collide. It gives up too soon (5 times, every 32 runs) and output is confusing. Increase tries to 20 and revise the error msg. [*] another approach would be to add a third socket to the fanout group and direct all unexpected traffic here. This is possible only when reimplementing methods like RR or HASH alongside this extra catch-all bucket, using the BPF fanout method. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23Drop a bunch of metag referencesJames Hogan
Now that arch/metag/ has been removed, drop a bunch of metag references in various codes across the whole tree: - VM_GROWSUP and __VM_ARCH_SPECIFIC_1. - MT_METAG_* ELF note types. - METAG Kconfig dependencies (FRAME_POINTER) and ranges (MAX_STACK_SIZE_MB). - metag cases in tools (checkstack.pl, recordmcount.c, perf). Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-mm@kvack.org Cc: linux-metag@vger.kernel.org
2018-02-22bpf, arm64: fix out of bounds access in tail callDaniel Borkmann
I recently noticed a crash on arm64 when feeding a bogus index into BPF tail call helper. The crash would not occur when the interpreter is used, but only in case of JIT. Output looks as follows: [ 347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510 [...] [ 347.043065] [fffb850e96492510] address between user and kernel address ranges [ 347.050205] Internal error: Oops: 96000004 [#1] SMP [...] [ 347.190829] x13: 0000000000000000 x12: 0000000000000000 [ 347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10 [ 347.201427] x9 : 0000000000000000 x8 : 0000000000000000 [ 347.206726] x7 : 0000000000000000 x6 : 001c991738000000 [ 347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a [ 347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500 [ 347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500 [ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61) [ 347.235221] Call trace: [ 347.237656] 0xffff000002f3a4fc [ 347.240784] bpf_test_run+0x78/0xf8 [ 347.244260] bpf_prog_test_run_skb+0x148/0x230 [ 347.248694] SyS_bpf+0x77c/0x1110 [ 347.251999] el0_svc_naked+0x30/0x34 [ 347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b) [...] In this case the index used in BPF r3 is the same as in r1 at the time of the call, meaning we fed a pointer as index; here, it had the value 0xffff808fd7cf0500 which sits in x2. While I found tail calls to be working in general (also for hitting the error cases), I noticed the following in the code emission: # bpftool p d j i 988 [...] 38: ldr w10, [x1,x10] 3c: cmp w2, w10 40: b.ge 0x000000000000007c <-- signed cmp 44: mov x10, #0x20 // #32 48: cmp x26, x10 4c: b.gt 0x000000000000007c 50: add x26, x26, #0x1 54: mov x10, #0x110 // #272 58: add x10, x1, x10 5c: lsl x11, x2, #3 60: ldr x11, [x10,x11] <-- faulting insn (f86b694b) 64: cbz x11, 0x000000000000007c [...] Meaning, the tests passed because commit ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper") was using signed compares instead of unsigned which as a result had the test wrongly passing. Change this but also the tail call count test both into unsigned and cap the index as u32. Latter we did as well in 90caccdd8cc0 ("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here, too. Tested on HiSilicon Hi1616. Result after patch: # bpftool p d j i 268 [...] 38: ldr w10, [x1,x10] 3c: add w2, w2, #0x0 40: cmp w2, w10 44: b.cs 0x0000000000000080 48: mov x10, #0x20 // #32 4c: cmp x26, x10 50: b.hi 0x0000000000000080 54: add x26, x26, #0x1 58: mov x10, #0x110 // #272 5c: add x10, x1, x10 60: lsl x11, x2, #3 64: ldr x11, [x10,x11] 68: cbz x11, 0x0000000000000080 [...] Fixes: ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-22Merge tag 'seccomp-v4.16-rc3' of ↵James Morris
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into fixes-v4.16-rc3 - Fix seccomp GET_METADATA to deal with field sizes correctly (Tycho Andersen) - Add selftest to make sure GET_METADATA doesn't regress (Tycho Andersen)
2018-02-22selftests/bpf/test_maps: exit child process without error in ENOMEM caseLi Zhijian
test_maps contains a series of stress tests, and previously it will break the rest tests when it failed to alloc memory. ----------------------- Failed to create hashmap key=8 value=262144 'Cannot allocate memory' Failed to create hashmap key=16 value=262144 'Cannot allocate memory' Failed to create hashmap key=8 value=262144 'Cannot allocate memory' Failed to create hashmap key=8 value=262144 'Cannot allocate memory' test_maps: test_maps.c:955: run_parallel: Assertion `status == 0' failed. Aborted not ok 1..3 selftests: test_maps [FAIL] ----------------------- after this patch, the rest tests will be continue when it occurs an ENOMEM failure CC: Alexei Starovoitov <alexei.starovoitov@gmail.com> CC: Philip Li <philip.li@intel.com> Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Li Zhijian <zhijianx.li@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-22perf cgroup: Simplify arguments when tracking multiple eventsweiping zhang
When using -G with one cgroup and -e with multiple events, only the first event gets the correct cgroup setting, all events from the second onwards will track system-wide events. If the user wants to track multiple events for a specific cgroup, the user must give parameters like the following: $ perf stat -e e1 -e e2 -e e3 -G test,test,test This patch simplify this case, just type one cgroup: $ perf stat -e e1 -e e2 -e e3 -G test $ mkdir -p /sys/fs/cgroup/perf_event/empty_cgroup $ perf stat -e cycles -e cache-misses -a -I 1000 -G empty_cgroup Before: 1.001007226 <not counted> cycles empty_cgroup 1.001007226 7,506 cache-misses After: 1.000834097 <not counted> cycles empty_cgroup 1.000834097 <not counted> cache-misses empty_cgroup Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180129154805.GA6284@localhost.didichuxing.com [ Improved the doc text a bit, providing an example for cgroup + system wide counting ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-21seccomp: add a selftest for get_metadataTycho Andersen
Let's test that we get the flags correctly, and that we preserve the filter index across the ptrace(PTRACE_SECCOMP_GET_METADATA) correctly. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-02-22selftests/bpf: update gitignore with test_libbpf_openAnders Roxell
bpf builds a test program for loading BPF ELF files. Add the executable to the .gitignore list. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Daniel Díaz <daniel.diaz@linaro.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-22selftests/bpf: tcpbpf_kern: use in6_* macros from glibcAnders Roxell
Both glibc and the kernel have in6_* macros definitions. Build fails because it picks up wrong in6_* macro from the kernel header and not the header from glibc. Fixes build error below: clang -I. -I./include/uapi -I../../../include/uapi -Wno-compare-distinct-pointer-types \ -O2 -target bpf -emit-llvm -c test_tcpbpf_kern.c -o - | \ llc -march=bpf -mcpu=generic -filetype=obj -o .../tools/testing/selftests/bpf/test_tcpbpf_kern.o In file included from test_tcpbpf_kern.c:12: .../netinet/in.h:101:5: error: expected identifier IPPROTO_HOPOPTS = 0, /* IPv6 Hop-by-Hop options. */ ^ .../linux/in6.h:131:26: note: expanded from macro 'IPPROTO_HOPOPTS' ^ In file included from test_tcpbpf_kern.c:12: /usr/include/netinet/in.h:103:5: error: expected identifier IPPROTO_ROUTING = 43, /* IPv6 routing header. */ ^ .../linux/in6.h:132:26: note: expanded from macro 'IPPROTO_ROUTING' ^ In file included from test_tcpbpf_kern.c:12: .../netinet/in.h:105:5: error: expected identifier IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header. */ ^ Since both glibc and the kernel have in6_* macros definitions, use the one from glibc. Kernel headers will check for previous libc definitions by including include/linux/libc-compat.h. Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-21selftests/memfd: add run_fuse_test.sh to TEST_FILESAnders Roxell
While testing memfd tests, there is a missing script, as reported by kselftest: ./run_tests.sh: line 7: ./run_fuse_test.sh: No such file or directory Link: http://lkml.kernel.org/r/1517955779-11386-1-git-send-email-daniel.diaz@linaro.org Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21tools: fix cross-compile var clobberingMartin Kelly
Currently a number of Makefiles break when used with toolchains that pass extra flags in CC and other cross-compile related variables (such as --sysroot). Thus we get this error when we use a toolchain that puts --sysroot in the CC var: ~/src/linux/tools$ make iio [snip] iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory #include <unistd.h> ^~~~~~~~~~ This occurs because we clobber several env vars related to cross-compiling with lines like this: CC = $(CROSS_COMPILE)gcc Although this will point to a valid cross-compiler, we lose any extra flags that might exist in the CC variable, which can break toolchains that rely on them (for example, those that use --sysroot). This easily shows up using a Yocto SDK: $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi $ echo $CC arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8 --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi $ echo $CROSS_COMPILE arm-poky-linux-gnueabi- $ echo ${CROSS_COMPILE}gcc krm-poky-linux-gnueabi-gcc Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the --sysroot and other flags that enable us to find the right libraries to link against, so we can't find unistd.h and other libraries and headers. Normally with the --sysroot flag we would find unistd.h in the sdk directory in the sysroot: $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h' [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not already set, and it compiles correctly with the above toolchain. So, generalize the logic that perf uses in the common Makefile and remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile. Note that this patch does not fix cross-compile for all the tools (some have other bugs), but it does fix it for all except usb and acpi, which still have other unrelated issues. I tested both with and without the patch on native and cross-build and there appear to be no regressions. Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com Signed-off-by: Martin Kelly <martin@martingkelly.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21pm-graph: AnalyzeSuspend v5.0Todd E Brandt
- add -cgskip option to reduce callgraph output size - add -cgfilter option to focus on a list of devices - add -result option for exporting batch test results - removed all phoronix hooks, use -result to enable batch testing - change -usbtopo to -devinfo, now prints all devices - add -gzip option to read/write logs in gz format - add -bufsize option to manually control ftrace buffer size - add -sync option to run filesystem sync prior to test - add -display option to enable/disable the display prior to test - add -rs option to enable/disable runtime suspend on all devices for test - add installed config files to search path - add kernel error/warning links into the timeline - fix callgraph trace to better handle interrupts - include command string and kernel params in timeline output header Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-21pm-graph: AnalyzeBoot v2.2Todd E Brandt
- add -cgskip option to reduce callgraph output size - add -cgfilter option to focus on a list of devices - add -result option for exporting batch test results - removed all phoronix hooks, use -result to enable batch testing - changed argument -f to match sleegraph, -f = -callgraph - use -fstat for function status instead of -f - add -verbose option to print out timeline stats and kernel options - include command string and kernel params in timeline output header Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-21pm-graph: config files and installerTodd E Brandt
- name change: analyze_boot.py to bootgraph.py - name change: analyze_suspend.py to sleepgraph.py - added config files for easier sleepgraph usage - added example.cfg which describes all config options - added cgskip.txt definition for slimmer callgraphs Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-02-20 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a memory leak in LPM trie's map_free() callback function, where the trie structure itself was not freed since initial implementation. Also a synchronize_rcu() was needed in order to wait for outstanding programs accessing the trie to complete, from Yonghong. 2) Fix sock_map_alloc()'s error path in order to correctly propagate the -EINVAL error in case of too large allocation requests. This was just recently introduced when fixing close hooks via ULP layer, fix from Eric. 3) Do not use GFP_ATOMIC in __cpu_map_entry_alloc(). Reason is that this will not work with the recent __ptr_ring_init_queue_alloc() conversion to kvmalloc_array(), where in case of fallback to vmalloc() that GFP flag is invalid, from Jason. 4) Fix two recent syzkaller warnings: i) fix bpf_prog_array_copy_to_user() when a prog query with a big number of ids was performed where we'd otherwise trigger a warning from allocator side, ii) fix a missing mlock precharge on arraymaps, from Daniel. 5) Two fixes for bpftool in order to avoid breaking JSON output when used in batch mode, from Quentin. 6) Move a pr_debug() in libbpf in order to avoid having an otherwise uninitialized variable in bpf_program__reloc_text(), from Jeremy. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21perf stat: Use xyarray dimensions to iterate fdsAndi Kleen
Now that the xyarray stores the dimensions we can use those to iterate over the FDs for a evsel. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20171006020029.13339-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-21perf kallsyms: Fix the usage on the man pageSangwon Hong
First, all man pages highlight only perf and subcommands except 'perf kallsyms', which includes the full usage. Fix it for commands to monopolize underlines. Second, options can be ommited when executing 'perf kallsyms', so add square brackets between <option>. Signed-off-by: Sangwon Hong <qpakzk@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1518377864-20353-1-git-send-email-qpakzk@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-21tools/memory-model: Remove rb-dep, smp_read_barrier_depends, and ↵Alan Stern
lockless_dereference Since commit 76ebbe78f739 ("locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()") was merged for the 4.15 kernel, it has not been necessary to use smp_read_barrier_depends(). Similarly, commit 59ecbbe7b31c ("locking/barriers: Kill lockless_dereference()") removed lockless_dereference() from the kernel. Since these primitives are no longer part of the kernel, they do not belong in the Linux Kernel Memory Consistency Model. This patch removes them, along with the internal rb-dep relation, and updates the revelant documentation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akiyks@gmail.com Cc: boqun.feng@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: nborisov@suse.com Cc: npiggin@gmail.com Cc: parri.andrea@gmail.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1519169112-20593-12-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21tools/memory-model: Convert underscores to hyphensPaul E. McKenney
Typical cat-language code uses hyphens for word separators in identifiers, but several LKMM identifiers use underscores instead. This commit therefore converts underscores to hyphens in the .bell- and .cat-file identifiers corresponding to smp_mb__before_atomic(), smp_mb__after_atomic(), and smp_mb__after_spinlock(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akiyks@gmail.com Cc: boqun.feng@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: nborisov@suse.com Cc: npiggin@gmail.com Cc: parri.andrea@gmail.com Cc: stern@rowland.harvard.edu Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1519169112-20593-11-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21tools/memory-model: Add a S lock-based external-view litmus testAlan Stern
This commit adds a litmus test in which P0() and P1() form a lock-based S litmus test, with the addition of P2(), which observes P0()'s and P1()'s accesses with a full memory barrier but without the lock. This litmus test asks whether writes carried out by two different processes under the same lock will be seen in order by a third process not holding that lock. The answer to this question is "yes" for all architectures supporting the Linux kernel, but is "no" according to the current version of LKMM. A patch to LKMM is under development. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akiyks@gmail.com Cc: boqun.feng@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: nborisov@suse.com Cc: npiggin@gmail.com Cc: parri.andrea@gmail.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1519169112-20593-10-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21tools/memory-model: Add required herd7 version to README filePaul E. McKenney
LKMM and the herd7 tool are co-evolving, and out-of-date herd7 tools produce inaccurate results, often with no obvious error messages. This commit therefore adds the required herd7 version to the LKMM README file. Longer term, it would be good if .cat files could specify the required version in a manner allowing herd7 to produce clear diagnostics. Suggested-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: nborisov@suse.com Cc: npiggin@gmail.com Cc: parri.andrea@gmail.com Cc: stern@rowland.harvard.edu Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1519169112-20593-9-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21README: Fix a couple of punctuation errorsPaul E. McKenney
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akiyks@gmail.com Cc: boqun.feng@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: nborisov@suse.com Cc: npiggin@gmail.com Cc: parri.andrea@gmail.com Cc: stern@rowland.harvard.edu Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1519169112-20593-5-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21EXP litmus_tests: Add comments explaining tests' purposesPaul E. McKenney
This commit adds comments to the litmus tests summarizing what these tests are intended to demonstrate. [ paulmck: Apply Andrea's and Alan's feedback. ] Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akiyks@gmail.com Cc: boqun.feng@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: nborisov@suse.com Cc: npiggin@gmail.com Cc: parri.andrea@gmail.com Cc: stern@rowland.harvard.edu Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1519169112-20593-4-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21MAINTAINERS: Add the Memory Consistency Model subsystemAndrea Parri
Move the contents of tools/memory-model/MAINTAINERS into the main MAINTAINERS file, removing tools/memory-model/MAINTAINERS. This allows get_maintainer.pl to correctly identify the maintainers of tools/memory-model/. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akiyks@gmail.com Cc: boqun.feng@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: nborisov@suse.com Cc: npiggin@gmail.com Link: http://lkml.kernel.org/r/1519169112-20593-2-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21tools/memory-model: Clarify the origin/scope of the tool nameAndrea Parri
Ingo pointed out that: "The "memory model" name is overly generic, ambiguous and somewhat misleading, as we usually mean the virtual memory layout/model when we say "memory model". GCC too uses it in that sense [...]" Make it clear that tools/memory-model/ uses the term "memory model" as shorthand for "memory consistency model" by calling out this convention in tools/memory-model/README. Stick to the original "memory model" term in sources' headers and for the subsystem name. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akiyks@gmail.com Cc: boqun.feng@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: nborisov@suse.com Cc: npiggin@gmail.com Link: http://lkml.kernel.org/r/1519169112-20593-1-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21Merge tag 'v4.16-rc2' into locking/core, to refresh the branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21objtool: Add module specific retpoline rulesPeter Zijlstra
David allowed retpolines in .init.text, except for modules, which will trip up objtool retpoline validation, fix that. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21objtool: Add retpoline validationPeter Zijlstra
David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled builds, where it validates no unannotated indirect jumps or calls are left. Add an additional .discard.retpoline_safe section to allow annotating the few indirect sites that are required and safe. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21objtool: Use existing global variables for optionsPeter Zijlstra
Use the existing global variables instead of passing them around and creating duplicate global variables. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20torture: Provide more sensible nreader/nwriter defaults for rcuperfPaul E. McKenney
The default values for nreader and nwriter are apparently not all that user-friendly, resulting in people doing scalability tests that ran all runs at large scale. This commit therefore makes both the nreaders and nwriters module default to the number of CPUs, and adds a comment to rcuperf.c stating that the number of CPUs should be specified using the nr_cpus kernel boot parameter. This commit also eliminates the redundant rcuperf scripting specification of default values for these parameters. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-02-20torture: Grace periods do not piggyback off of themselvesPaul E. McKenney
The rcuperf trace-event processing counted every "done" trace event as a piggyback, which is incorrect because the task that started the grace period didn't piggyback at all. This commit fixes this problem by recording the task that started a given grace period and ignoring that task's "done" record for that grace period. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-02-20torture: Adjust rcuperf trace processing to allow for workqueuesPaul E. McKenney
The rcuperf event-trace processing assumes that expedited grace periods start and end on the same task, an assumption that was violated by moving expedited grace-period processing to workqueues. This commit removes this now-fallacious assumption from rcuperf's event-trace processing. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-02-20torture: Default jitter off when running rcuperfPaul E. McKenney
The purpose of jitter is to expose concurrency bugs due to invalid assumptions about forward progress. There is usually little point in jitter when measuring performance. This commit therefore defaults jitter off when running rcuperf. You can override this by specifying the kvm.sh "--jitter" argument -after- the "--torture rcuperf" argument. No idea why you would want this, but if you do, that is how you do it. One example of a conccurrency bug that this jitter might expose is one in which the developer assumed that a given short region of code would be guaranteed to execute within some short time limit. Such assumptions are invalid in virtualized environments because the hupervisor can preempt the guest OS at any point, even when the guest OS thinks that it has disabled interrupts. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-02-20torture: Specify qemu memory size with --memory argumentPaul E. McKenney
The 512 megabyte memory size has served quite well, but more memory is required when using large trace buffers on large systems. This commit therefore adds a --memory argument to the kvm.sh script, which allows the memory size to be specified on the command line, for example, "--memory 768", --memory 800M", or "--memory 2G". Reported-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-02-20rcutorture: Add basic ARM64 support to run scriptsLihao Liang
This commit adds support of the qemu command qemu-system-aarch64 to rcutorture. Signed-off-by: Lihao Liang <lianglihao@huawei.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-02-20rcutorture: Update kvm.sh header commentPaul E. McKenney
The kvm.sh header comment is a bit of a relic, so this commit brings it up to date. Reported-by: Lihao Liang <lianglihao@huawei.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-02-20doc: Fix typo in rcutorture documentationLihao Liang
Signed-off-by: Lihao Liang <lianglihao@huawei.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-13 18:03:56 +0000