| Age | Commit message (Collapse) | Author |
|---|
|
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
|
|
into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
|
|
Add GET_IRQTYPE API checks to each interrupt test.
While at it, change pci_ep_ioctl() to get the appropriate return
value from ioctl().
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-2-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Currently BARs that have been disabled by the endpoint controller driver
will result in a test FAIL.
Returning FAIL for a BAR that is disabled seems overly pessimistic.
There are EPC that disables one or more BARs intentionally.
One reason for this is that there are certain EPCs that are hardwired to
expose internal PCIe controller registers over a certain BAR, so the EPC
driver disables such a BAR, such that the host will not overwrite random
registers during testing.
Such a BAR will be disabled by the EPC driver's init function, and the
BAR will be marked as BAR_RESERVED, such that it will be unavailable to
endpoint function drivers.
Let's return FAIL only for BARs that are actually enabled and failed the
test, and let's return skip for BARs that are not even enabled.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250123120147.3603409-4-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
e19bde2269ca ("selftests: Move PCI Endpoint tests from tools/pci to
Kselftests") moves tools/pci/ to tools/testing/selftests/pci_endpoint,
which causes build failure when running "make pci" under tools:
linux/tools$ make pci
DESCEND pci
make[1]: *** No targets specified and no makefile found. Stop.
make: *** [Makefile:73: pci] Error 2
Update the top level tools/Makefile to remove reference to building,
installing and cleaning pci components.
Link: https://lore.kernel.org/r/20250217115159.537920-1-liujianfeng1994@gmail.com
Fixes: e19bde2269ca ("selftests: Move PCI Endpoint tests from tools/pci to Kselftests")
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The asm/ and asm-generic/ namespaces are implementation details of the UAPI
headers and not meant for direct usage.
Use the equivalent headers from the linux/ namespace instead.
While at it also drop the duplicate include of linux/signal.h from sys.h.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250307-nolibc-asm-headers-v2-1-e2a734f25d22@linutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-03-06
We've added 6 non-merge commits during the last 13 day(s) which contain
a total of 6 files changed, 230 insertions(+), 56 deletions(-).
The main changes are:
1) Add XDP metadata support for tun driver, from Marcus Wichelmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Fix file descriptor assertion in open_tuntap helper
selftests/bpf: Add test for XDP metadata support in tun driver
selftests/bpf: Refactor xdp_context_functional test and bpf program
selftests/bpf: Move open_tuntap to network helpers
net: tun: Enable transfer of XDP metadata to skb
net: tun: Enable XDP metadata support
====================
Link: https://patch.msgid.link/20250307055335.441298-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure git doesn't pick up this new target.
Fixes: 03544faad761 ("selftest: net: add proc_net_pktgen")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250307031356.368350-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390
by introducing a dedicated GNU hash bucket pointer with correct
32-bit entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ftrace: Fix return address recovery of traced function
selftests/vDSO: Fix GNU hash table entry size for s390x
s390/traps: Fix test_monitor_call() inline assembly
|
|
library versioning was broken:
libcpupower.so.0.0.1
libcpupower.so -> libcpupower.so.0.0.1
libcpupower.so.1 -> libcpupower.so.0.0.1
and is fixed by this patch to:
libcpupower.so.1.0.1
libcpupower.so -> libcpupower.so.1.0.1
libcpupower.so.1 -> libcpupower.so.1.0.1
Link: https://lore.kernel.org/r/20250307094334.39587-1-trenn@suse.de
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
This version has fix for:
- Display of die ID and optimize array size for multi package
systems.
- Fix build warning with cross compiler
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
This helps when using a cross-compiler for building intel-speed-select,
currently, its hardcoded to pick libnl3 headers from build host which may
not be same as build target when cross compiling.
cc -print-sysroot will print nothing if compiler is configured without
a sysroot and result in same string as it is now.
Fixes errors with gcc configured with host include poisoning e.g.
cc1: error: include location "/usr/include/libnl3" is unsafe for
cross-compilation [-Werror=poison-system-directories]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
[ srinivas: Changelog edits for checkpatch warning ]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Instead of displaying "-1" for IO dies, display "IO".
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Even when there is no die exported by CPUID leaf 0x1F, the kernel version
after 6.9 will show non zero die_id in the sysfs. In that case maximum
die_id can still match maximum power domain ID. So the condition to check
if the power domain ID is same a die_id to prevent duplicate display
doesn't hold true.
The better condition is to check if the maximum die_id is more than the
maximum package_id. If the die_id is exposed by CPUID leaf 0x1F, the
maximum die_id will be more than maximum package_id.
With this change tracking of max_punit_id is not used, so remove storing
max_punit_id.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
In the function for_each_online_power_domain_in_set() to pick one CPU
from each power domain a three-dimensional array is used, which assumes
that a package contains multiple dies, that means the die_id from
/sys/devices/system/cpu/cpu0/topology/die_id is only local to package.
If it is not unique, still there will be no functional issues in the
current generation of products, but the MAX_DIE_PER_PACKAGE will need to
be increased for future products with many packages.
After kernel version 6.9 die ID is unique system wide not per package.
Even if the CPU topology has no dies, the ID will still increment across
package. In this case the die_id in package 0 will be 0 and die_id in
package 1 will be 1 in a 2-package system.
Since the die count must be same for packages, just count the number of
dies in package 0 and calculate die index from
/sys/devices/system/cpu/cpu0/topology/die_id which is only unique within
a package.
In this way the array size
"int cpus[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE][MAX_PUNIT_PER_DIE]"
doesn't have to increase with increasing package count.
No functional change is expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
The execution order of constructors in undefined and depends on the
toolchain. While recent toolchains seems to have a stable order, it
doesn't work for older ones and may also change at any time.
Stop validating the order and instead only validate that all
constructors are executed.
Reported-by: Willy Tarreau <w@1wt.eu>
Closes: https://lore.kernel.org/lkml/20250301110735.GA18621@1wt.eu/
Link: https://lore.kernel.org/r/20250306-nolibc-constructor-order-v1-1-68fd161cc5ec@weissschuh.net
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
WiFi removed one of their subsys entries from drop reasons, in
commit 286e69677065 ("wifi: mac80211: Drop cooked monitor support")
SKB_DROP_REASON_SUBSYS_OPENVSWITCH is now 2 not 3.
The drop reasons are not uAPI, read the correct value
from debug info.
We need to enable vmlinux BTF, otherwise pahole needs
a few GB of memory to decode the enum name.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250304180615.945945-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After installing pahole on the CI image we have a new map created
by libbpf. Ignore it otherwise we see:
Exception: Time out waiting for map counts to stabilize want 2, have 3
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250304233204.1139251-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We hit a following exception on timeout, nmaps is never set:
Test bpftool bound info reporting (own ns)...
Traceback (most recent call last):
File "/home/virtme/testing-1/tools/testing/selftests/net/./bpf_offload.py", line 1128, in <module>
check_dev_info(False, "")
File "/home/virtme/testing-1/tools/testing/selftests/net/./bpf_offload.py", line 583, in check_dev_info
maps = bpftool_map_list_wait(expected=2, ns=ns)
File "/home/virtme/testing-1/tools/testing/selftests/net/./bpf_offload.py", line 215, in bpftool_map_list_wait
raise Exception("Time out waiting for map counts to stabilize want %d, have %d" % (expected, nmaps))
NameError: name 'nmaps' is not defined
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250304233204.1139251-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This doesn't matter much, but is what the standard says.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-5-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This behaviour was changed in commit a7604ba149e7 ("tools/nolibc/sys:
make open() take a vararg on the 3rd argument").
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-4-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
openat() uses mode_t for this, so also update open() to be consistent.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-3-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
All architectures support openat, so we don't need to make its use
conditional.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-2-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
openat is useful to avoid needing to construct relative paths, so expose
a wrapper for using it directly.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-1-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e45a ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e77 ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The open_tuntap helper function uses open() to get a file descriptor for
/dev/net/tun.
The open(2) manpage writes this about its return value:
On success, open(), openat(), and creat() return the new file
descriptor (a nonnegative integer). On error, -1 is returned and
errno is set to indicate the error.
This means that the fd > 0 assertion in the open_tuntap helper is
incorrect and should rather check for fd >= 0.
When running the BPF selftests locally, this incorrect assertion was not
an issue, but the BPF kernel-patches CI failed because of this:
open_tuntap:FAIL:open(/dev/net/tun) unexpected open(/dev/net/tun):
actual 0 <= expected 0
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250305213438.3863922-7-marcus.wichelmann@hetzner-cloud.de
|
|
Add a selftest that creates a tap device, attaches XDP and TC programs,
writes a packet with a test payload into the tap device and checks the
test result. This test ensures that the XDP metadata support in the tun
driver is enabled and that the metadata size is correctly passed to the
skb.
See the previous commit ("selftests/bpf: refactor xdp_context_functional
test and bpf program") for details about the test design.
The test runs in its own network namespace. This provides some extra
safety against conflicting interface names.
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250305213438.3863922-6-marcus.wichelmann@hetzner-cloud.de
|
|
The existing XDP metadata test works by creating a veth pair and
attaching XDP & TC programs that drop the packet when the condition of
the test isn't fulfilled. The test then pings through the veth pair and
succeeds when the ping comes through.
While this test works great for a veth pair, it is hard to replicate for
tap devices to test the XDP metadata support of them. A similar test for
the tun driver would either involve logic to reply to the ping request,
or would have to capture the packet to check if it was dropped or not.
To make the testing of other drivers easier while still maximizing code
reuse, this commit refactors the existing xdp_context_functional test to
use a test_result map. Instead of conditionally passing or dropping the
packet, the TC program is changed to copy the received metadata into the
value of that single-entry array map. Tests can then verify that the map
value matches the expectation.
This testing logic is easy to adapt to other network drivers as the only
remaining requirement is that there is some way to send a custom
Ethernet packet through it that triggers the XDP & TC programs.
The Ethernet header of that custom packet is all-zero, because it is not
required to be valid for the test to work. The zero ethertype also helps
to filter out packets that are not related to the test and would
otherwise interfere with it.
The payload of the Ethernet packet is used as the test data that is
expected to be passed as metadata from the XDP to the TC program and
written to the map. It has a fixed size of 32 bytes which is a
reasonable size that should be supported by both drivers. Additional
packet headers are not necessary for the test and were therefore skipped
to keep the testing code short.
This new testing methodology no longer requires the veth interfaces to
have IP addresses assigned, therefore these were removed.
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250305213438.3863922-5-marcus.wichelmann@hetzner-cloud.de
|
|
To test the XDP metadata functionality of the tun driver, it's necessary
to create a new tap device first. A helper function for this already
exists in lwt_helpers.h. Move it to the common network helpers header,
so it can be reused in other tests.
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250305213438.3863922-4-marcus.wichelmann@hetzner-cloud.de
|
|
This patch is also an issue report. get_cpu_topology will always save
into cpupower_topology a cores size of 0. The code to handle this looks
like it was commented out, and what is commented out is missing a curly
bracket.
https://elixir.bootlin.com/linux/v6.13.5/source/tools/power/cpupower/lib/cpupower.c#L206-L212
Inspiration was taken from psutil to implement this by querying
core_cpu_list. Instead of using a hashmap, I used a sorted array, and
counted the number of valid unique strings. The counting of this takes
place before the qsort for .pkg as the following code says it is
dependent on the order of that sort.
The previous code claimed Intel CPUs are not numbered correctly. I was
not able to reproduce that issue and removed that comment and the code.
This commit was tested with the libcpupower SWIG Python bindings and
performed correctly on 4 different setups. The most notable is the
Framework Intel laptop; a hybrid system of 4 P cores (8 threads) and 8 E
cores (8 threads).
The 4 setups: A 4 core virt-manager VM running Fedora 41 4c/4t (specs not
listed) was tested as a sanity test for VMs. A Lenovo Ryzen 7 Pro 7840HS
8c/16t. A Supermico Intel(R) Xeon(R) Gold 6330 CPU w/ 56c/112t with 2 CPU
sockets. A Framework 12th Gen Intel(R) Core(TM) i5-1240P with hybrid
cores.
CPU(s): 16
On-line CPU(s) list: 0-15
Vendor ID: AuthenticAMD
Model name: AMD Ryzen 7 PRO 7840HS w/ Radeon 780M Graphics
CPU family: 25
Model: 116
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 1
Stepping: 1
CPU(s): 112
On-line CPU(s) list: 0-111
Vendor ID: GenuineIntel
BIOS Vendor ID: Intel(R) Corporation
Model name: Intel(R) Xeon(R) Gold 6330 CPU @ 2.00GHz
BIOS Model name: Intel(R) Xeon(R) Gold 6330 CPU @ 2.00GHz CPU @ 2.0GHz
BIOS CPU family: 179
CPU family: 6
Model: 106
Thread(s) per core: 2
Core(s) per socket: 28
Socket(s): 2
Stepping: 6
CPU(s): 16
On-line CPU(s) list: 0-15
Vendor ID: GenuineIntel
Model name: 12th Gen Intel(R) Core(TM) i5-1240P
CPU family: 6
Model: 154
Thread(s) per core: 2
Core(s) per socket: 12
Socket(s): 1
Stepping: 3
Link: https://lore.kernel.org/r/20250305210901.24177-1-jwyatt@redhat.com
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Remove hard-coded topology depth values and replace them with
defines to improve code readability and maintainability in
cpupower-monitor code.
Link: https://lore.kernel.org/r/20250305225342.19447-3-skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
cmd_monitor() calls get_cpu_topology() to allocate memory for
cpu topology and fails to release in error legs.
Fix it to call cpu_topology_release() from error legs.
Link: https://lore.kernel.org/r/20250305225342.19447-2-skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add CXL mailbox Features commands enabling. This is also preparation for
CXL fwctl enabling. The same code will also be utilized by the CXL EDAC
enabling. The commands 'Get Supported Features', 'Get Feature', and 'Set
Feature' are enabled for kernel usages.
Required for the CXL fwctl driver.
* branch 'for-6.15/features'
cxl: Setup exclusive CXL features that are reserved for the kernel
cxl/mbox: Add SET_FEATURE mailbox command
cxl/mbox: Add GET_FEATURE mailbox command
cxl/test: Add Get Supported Features mailbox command support
cxl: Add Get Supported Features command for kernel usage
cxl: Enumerate feature commands
cxl: Refactor user ioctl command path from mds to mailbox
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Requesting a fwctl scope of access that includes mutating device debug
data will cause the kernel to be tainted. Changing the device operation
through things in the debug scope may cause the device to malfunction in
undefined ways. This should be reflected in the TAINT flags to help any
debuggers understand that something has been done.
Link: https://patch.msgid.link/r/4-v5-642aa0c94070+4447f-fwctl_jgg@nvidia.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
with min/max boundaries
damon_nr_regions.py starts DAMON, periodically collect number of regions
in snapshots, and see if it is in the requested range. The check code
assumes the numbers are sorted on the collection list, but there is no
such guarantee. Hence this can result in false positive test success.
Sort the list before doing the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-4-sj@kernel.org
Fixes: 781497347d1b ("selftests/damon: implement test for min/max_nr_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
100ms
damon_nr_regions.py updates max_nr_regions to a number smaller than
expected number of real regions and confirms DAMON respect the harsh
limit. To give time for DAMON to make changes for the regions, 3
aggregation intervals (300 milliseconds) are given.
The internal mechanism works with not only the max_nr_regions, but also
sz_limit, though. It avoids merging region if that casn make region of
size larger than sz_limit. In the test, sz_limit is set too small to
achive the new max_nr_regions, unless it is updated for the new
min_nr_regions. But the update is done only once per operations set
update interval, which is one second by default.
Hence, the test randomly incurs false positive failures. Fix it by
setting the ops interval same to aggregation interval, to make sure
sz_limit is updated by the time of the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-3-sj@kernel.org
Fixes: 8bf890c81612 ("selftests/damon/damon_nr_regions: test online-tuned max_nr_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: three fixes for false results".
Fix three DAMON selftest bugs that cause two and one false positive
failures and successes.
This patch (of 3):
damos_quota.py assumes the quota will always exceeded. But whether quota
will be exceeded or not depend on the monitoring results. Actually the
monitored workload has chaning access pattern and hence sometimes the
quota may not really be exceeded. As a result, false positive test
failures happen. Expect how much time the quota will be exceeded by
checking the monitoring results, and use it instead of the naive
assumption.
Link: https://lkml.kernel.org/r/20250225222333.505646-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250225222333.505646-2-sj@kernel.org
Fixes: 51f58c9da14b ("selftests/damon: add a test for DAMOS quota")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
further reduced
damos_quota_goal.py selftest see if DAMOS quota goals tuning feature
increases or reduces the effective size quota for given score as expected.
The tuning feature sets the minimum quota size as one byte, so if the
effective size quota is already one, we cannot expect it further be
reduced. However the test is not aware of the edge case, and fails since
it shown no expected change of the effective quota. Handle the case by
updating the failure logic for no change to see if it was the case, and
simply skips to next test input.
Link: https://lkml.kernel.org/r/20250217182304.45215-1-sj@kernel.org
Fixes: f1c07c0a1662 ("selftests/damon: add a test for DAMOS quota goal")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171423.b28a918d-lkp@intel.com
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org> [6.10.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit a5c6bc590094a1a73cf6fa3f505e1945d2bf2461.
The general approach described in commit e076eaca5906 ("selftests: break
the dependency upon local header files") was taken one step too far here:
it should not have been extended to include the syscall numbers. This is
because doing so would require per-arch support in tools/include/uapi, and
no such support exists.
This revert fixes two separate reports of test failures, from Dave
Hansen[1], and Li Wang[2]. An excerpt of Dave's report:
Before this commit (a5c6bc590094a1a73cf6fa3f505e1945d2bf2461) things are
fine. But after, I get:
running PKEY tests for unsupported CPU/OS
An excerpt of Li's report:
I just found that mlock2_() return a wrong value in mlock2-test
[1] https://lore.kernel.org/dc585017-6740-4cab-a536-b12b37a7582d@intel.com
[2] https://lore.kernel.org/CAEemH2eW=UMu9+turT2jRie7+6ewUazXmA6kL+VBo3cGDGU6RA@mail.gmail.com
Link: https://lkml.kernel.org/r/20250214033850.235171-1-jhubbard@nvidia.com
Fixes: a5c6bc590094 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Li Wang <liwang@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is helpful to vary the number of the LCOFI interrupts generated
by the overflow test. Allow additional argument for overflow test
to accommodate that. It can be easily cross-validated with
/proc/interrupts output in the host.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-4-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The PMU test commandline option takes an argument to disable a
certain test. The initial assumption behind this was a common use case
is just to run all the test most of the time. However, running a single
test seems more useful instead. Especially, the overflow test has been
helpful to validate PMU virtualizaiton interrupt changes.
Switching the command line option to run a single test instead
of disabling a single test also allows to provide additional
test specific arguments to the test. The default without any options
remains unchanged which continues to run all the tests.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-3-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
There is no need to start the counter in the overflow handler as we
intend to trigger precise number of LCOFI interrupts through these
tests. The overflow irq handler has already stopped the counter. As
a result, the stop call from the test function may return already
stopped error which is fine as well.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-2-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
mappings
While the kselftest was added at the same time with the kernel support
for MTE on hugetlb mappings, the tests may be run on older kernels. Skip
the tests if PROT_MTE is not supported on MAP_HUGETLB mappings.
Fixes: 27879e8cb6b0 ("selftests: arm64: add hugetlb mte tests")
Cc: Yang Shi <yang@os.amperecomputing.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250221093331.2184245-3-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
check_hugetlb_options.c
The architecture doesn't define precise/imprecise MTE tag check modes,
only synchronous and asynchronous. Use the correct naming and also
ensure they match the MTE_{ASYNC,SYNC}_ERR type.
Fixes: 27879e8cb6b0 ("selftests: arm64: add hugetlb mte tests")
Cc: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250221093331.2184245-2-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
"int" was misspelled as "init" the code comments in the bits.h and
const.h files. Fix the typo.
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
PTP Hardware Clocks no longer require WRITE permission to perform
readonly operations, such as listing device capabilities or listening to
EXTTS events once they have been enabled by a process with WRITE
permissions.
Add '-r' option to testptp to open the PHC in readonly mode instead of
the default read-write mode. Skip enabling EXTTS if readonly mode is
requested.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a selftest for PIDFD_INFO_EXIT behavior.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-16-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a selftest for PIDFD_INFO_EXIT behavior.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-15-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
