| Age | Commit message (Collapse) | Author |
|---|
|
We use wait_port_listen() extensively to wait for a process
we spawned to be ready. Not all processes will open listening
sockets. Add a method of explicitly waiting for a child to
be ready. Pass a FD to the spawned process and wait for it
to write a message to us. FD number is passed via KSFT_READY_FD
env variable.
Similarly use KSFT_WAIT_FD to let the child process for a sign
that we are done and child should exit. Sending a signal to
a child with shell=True can get tricky.
Make use of this method in the queues test to make it less flaky.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Separate the support check from socket binding for easier refactoring.
Use: ./helper - - just to probe if we can open the socket.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kurt and Joe report missing new line at the end of Usage.
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cfg.rpath() helper was been recently added to make formatting
paths for helper binaries easier.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Joe Damato reports that some shells will fork before running
the command when python does "sh -c $cmd", while bash on my
machine does an exec of $cmd directly.
This will have implications for our ability to terminate
the child process on various configurations of bash and
other shells. Warn about using
bkg(... shell=True, termininate=True)
most background commands can hopefully exit cleanly (exit_wait).
Link: https://lore.kernel.org/Z7Yld21sv_Ip3gQx@LQ3V64L9R2
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
|
|
Add launch time hardware offload request to xdp_hw_metadata. Users can
configure the delta of launch time relative to HW RX-time using the "-l"
argument. By default, the delta is set to 0 ns, which means the launch time
is disabled. By setting the delta to a non-zero value, the launch time
hardware offload feature will be enabled and requested. Additionally, users
can configure the Tx Queue to be enabled with the launch time hardware
offload using the "-L" argument. By default, Tx Queue 0 will be used.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250216093430.957880-3-yoong.siang.song@intel.com
|
|
Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule the packet for
transmission at a pre-determined time called launch time. The value of
launch time is communicated from user space to Ethernet driver via
launch_time field of struct xsk_tx_metadata.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250216093430.957880-2-yoong.siang.song@intel.com
|
|
BPF program calculates a couple of latency deltas between each tx
timestamping callbacks. It can be used in the real world to diagnose
the kernel behaviour in the tx path.
Check the safety issues by accessing a few bpf calls in
bpf_test_access_bpf_calls() which are implemented in the patch 3 and 4.
Check if the bpf timestamping can co-exist with socket timestamping.
There remains a few realistic things[1][2] to highlight:
1. in general a packet may pass through multiple qdiscs. For instance
with bonding or tunnel virtual devices in the egress path.
2. packets may be resent, in which case an ACK might precede a repeat
SCHED and SND.
3. erroneous or malicious peers may also just never send an ACK.
[1]: https://lore.kernel.org/all/67a389af981b0_14e0832949d@willemb.c.googlers.com.notmuch/
[2]: https://lore.kernel.org/all/c329a0c1-239b-4ca1-91f2-cb30b8dd2f6a@linux.dev/
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-13-kerneljasonxing@gmail.com
|
|
This patch introduces a new callback in tcp_tx_timestamp() to correlate
tcp_sendmsg timestamp with timestamps from other tx timestamping
callbacks (e.g., SND/SW/ACK).
Without this patch, BPF program wouldn't know which timestamps belong
to which flow because of no socket lock protection. This new callback
is inserted in tcp_tx_timestamp() to address this issue because
tcp_tx_timestamp() still owns the same socket lock with
tcp_sendmsg_locked() in the meanwhile tcp_tx_timestamp() initializes
the timestamping related fields for the skb, especially tskey. The
tskey is the bridge to do the correlation.
For TCP, BPF program hooks the beginning of tcp_sendmsg_locked() and
then stores the sendmsg timestamp at the bpf_sk_storage, correlating
this timestamp with its tskey that are later used in other sending
timestamping callbacks.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-11-kerneljasonxing@gmail.com
|
|
Support the ACK case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_ACK_CB. This
callback will occur at the same timestamping point as the user
space's SCM_TSTAMP_ACK. The BPF program can use it to get the
same SCM_TSTAMP_ACK timestamp without modifying the user-space
application.
This patch extends txstamp_ack to two bits: 1 stands for
SO_TIMESTAMPING mode, 2 bpf extension.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-10-kerneljasonxing@gmail.com
|
|
Support hw SCM_TSTAMP_SND case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SND_HW_CB. This
callback will occur at the same timestamping point as the user
space's hardware SCM_TSTAMP_SND. The BPF program can use it to
get the same SCM_TSTAMP_SND timestamp without modifying the
user-space application.
To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP
with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers
from driver side using SKBTX_HW_TSTAMP. The new definition of
SKBTX_HW_TSTAMP means the combination tests of socket timestamping
and bpf timestamping. After this patch, drivers can work under the
bpf timestamping.
Considering some drivers don't assign the skb with hardware
timestamp, this patch does the assignment and then BPF program
can acquire the hwstamp from skb directly.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-9-kerneljasonxing@gmail.com
|
|
Support sw SCM_TSTAMP_SND case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SND_SW_CB. This
callback will occur at the same timestamping point as the user
space's software SCM_TSTAMP_SND. The BPF program can use it to
get the same SCM_TSTAMP_SND timestamp without modifying the
user-space application.
Based on this patch, BPF program will get the software
timestamp when the driver is ready to send the skb. In the
sebsequent patch, the hardware timestamp will be supported.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-8-kerneljasonxing@gmail.com
|
|
Support SCM_TSTAMP_SCHED case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SCHED_CB. This
callback will occur at the same timestamping point as the user
space's SCM_TSTAMP_SCHED. The BPF program can use it to get the
same SCM_TSTAMP_SCHED timestamp without modifying the user-space
application.
A new SKBTX_BPF flag is added to mark skb_shinfo(skb)->tx_flags,
ensuring that the new BPF timestamping and the current user
space's SO_TIMESTAMPING do not interfere with each other.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-7-kerneljasonxing@gmail.com
|
|
The new SK_BPF_CB_FLAGS and new SK_BPF_CB_TX_TIMESTAMPING are
added to bpf_get/setsockopt. The later patches will implement the
BPF networking timestamping. The BPF program will use
bpf_setsockopt(SK_BPF_CB_FLAGS, SK_BPF_CB_TX_TIMESTAMPING) to
enable the BPF networking timestamping on a socket.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-2-kerneljasonxing@gmail.com
|
|
32-bit s390 is very close to the existing 64-bit implementation.
Some special handling is necessary as there is neither LLVM nor
QEMU support. Also the kernel itself can not build natively for 32-bit
s390, so instead the test program is executed with a 64-bit kernel.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250206-nolibc-s390-v2-2-991ad97e3d58@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Support for 32-bit s390 is about to be added.
As "s39032" would look horrible, use the another naming scheme.
32-bit s390 is "s390" and 64-bit s390 is "s390x",
similar to how it is handled in various toolchain components.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250206-nolibc-s390-v2-1-991ad97e3d58@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The nolibc testsuite can be run against other libcs to test for
interoperability. Some aspects of the constructor execution are not
standardized and musl does not provide all tested feature, for one it
does not provide arguments to the constructors, anymore?
Skip the constructor tests on non-nolibc configurations.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250212-nolibc-test-constructor-v1-1-c963875b3da4@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The tests:
trigger-action-hist-xfail.tc
trigger-onchange-action-hist.tc
trigger-snapshot-action-hist.tc
trigger-hist-expressions.tc
can all run in an instance. Test them in an instance as well.
Link: https://lore.kernel.org/r/20250220185846.451234966@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The triggers set in trigger-onchange-action-hist.tc and
trigger-snapshot-action-hist.tc are not cleaned up at the end. These tests
can also be done in instances and without cleaning up the triggers, the
instances can not be removed as they are still "busy".
Link: https://lore.kernel.org/r/20250220185846.291817731@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
For the tests that have both a README attribute as well as the instance
flag to run the tests as an instance, the instance version will always
exit with UNSUPPORTED. That's because the instance directory does not
contain a README file. Currently, the tests check for a README file in the
directory that the test runs in and if there's a requirement for something
to be present in the README file, it will not find it, as the instance
directory doesn't have it.
Have the tests check if the current directory is an instance directory,
and if it is, check two directories above the current directory for the
README file:
/sys/kernel/tracing/README
/sys/kernel/tracing/instances/foo/../../README
Link: https://lore.kernel.org/r/20250220185846.130216270@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc4).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Smaller than usual with no fixes from any subtree.
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev))
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth:
- geneve: fix use-after-free in geneve_find_dev()
- ibmvnic: don't reference skb after sending to VIOS"
* tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: skb: introduce and use a single page frag cache"
net: allow small head cache usage with large MAX_SKB_FRAGS values
nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
tcp: drop secpath at the same time as we currently drop dst
net: axienet: Set mac_managed_pm
arp: switch to dev_getbyhwaddr() in arp_req_set_public()
net: Add non-RCU dev_getbyhwaddr() helper
sctp: Fix undefined behavior in left shift operation
selftests/bpf: Add a specific dst port matching
flow_dissector: Fix port range key handling in BPF conversion
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
flow_dissector: Fix handling of mixed port and port-range keys
geneve: Suppress list corruption splat in geneve_destroy_tunnels().
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
dev: Use rtnl_net_dev_lock() in unregister_netdev().
net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
net: Add net_passive_inc() and net_passive_dec().
net: pse-pd: pd692x0: Fix power limit retrieval
MAINTAINERS: trim the GVE entry
gve: set xdp redirect target only when it is available
...
|
|
In the case that we give a invalid command to idle_monitor for
monitoring, the execvp() will fail and thus go to the next line.
As a result, we'll see two differnt monitoring output. For
example, running `cpupower monitor -i 5 invalidcmd` which `invalidcmd`
is not executable.
Link: https://lore.kernel.org/r/20250220163846.2765-1-s921975628@gmail.com
Signed-off-by: Yiwei Lin <s921975628@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Herd7 transforms successful RMW with Mb tags by inserting smp_mb() fences
around them. We emulate this by considering imaginary po-edges before the
RMW read and before the RMW write, and extending the smp_mb() ordering
rule, which currently only applies to real po edges that would be found
around a really inserted smp_mb(), also to cases of the only imagined po
edges.
Reported-by: Viktor Vafeiadis <viktor@mpi-sws.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Herd7 transforms reads, writes, and read-modify-writes by eliminating
'acquire tags from writes, 'release tags from reads, and 'acquire,
'release, and 'mb tags from failed read-modify-writes. We emulate this
behavior by redefining Acquire, Release, and Mb sets in linux-kernel.bell
to explicitly exclude those combinations.
Herd7 furthermore adds 'noreturn tag to certain reads. Currently herd7
does not allow specifying the 'noreturn tag manually, but such manual
declaration (e.g., through a syntax __atomic_op{noreturn}) would add
invalid 'noreturn tags to writes; in preparation, we already also exclude
this combination.
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The current macros in linux-kernel.def reference instructions such as
__xchg{mb} or __cmpxchg{acquire}, which are invalid combinations of tags
and instructions according to the declarations in linux-kernel.bell.
This works with current herd7 because herd7 removes these tags anyways
and does not actually enforce validity of combinations at all.
If a future herd7 version no longer applies these hardcoded
transformations, then all currently invalid combinations will actually
appear on some instruction.
We therefore adjust the declarations to make the resulting combinations
valid, by adding the 'mb tag to the set of Accesses and allowing all
Accesses to appear on all read, write, and RMW instructions.
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Pull-855[1] added the support of atomic_andnot() to the herd tool. Use
this to add the implementation in the LKMM. All of the ordering variants
are also added.
Here is a small litmus-test that uses this operation:
C andnot
{
atomic_t u = ATOMIC_INIT(7);
}
P0(atomic_t *u)
{
r0 = atomic_fetch_andnot(3, u);
r1 = READ_ONCE(*u);
}
exists (0:r0=7 /\ 0:r1=4)
Test andnot Allowed
States 1
0:r0=7; 0:r1=4;
Ok
Witnesses
Positive: 1 Negative: 0
Condition exists (0:r0=7 /\ 0:r1=4)
Observation andnot Always 1 0
Time andnot 0.00
Hash=78f011a0b5a0c65fa1cf106fcd62c845
[1] https://github.com/herd/herdtools7/pull/855
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: <linux-arch@vger.kernel.org>
|
|
Pull-849[1] added the support of '&', '|', and '^' to the herd7 tool's
atomics operations.
Use these in linux-kernel.def to implement atomic_and()/or()/xor() with
all their ordering variants.
atomic_add_negative() is already available so add its acquire, release,
and relaxed ordering variants.
[1] https://github.com/herd/herdtools7/pull/849
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: <linux-arch@vger.kernel.org>
|
|
Add simple tests to validate that non-nsfs ioctls are rejected.
Link: https://lore.kernel.org/r/20250219-work-nsfs-v1-2-21128d73c5e8@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a simple test for TSO. Send a few MB of data and check device
stats to verify that the device was performing segmentation.
Do the same thing over a few tunnel types.
Injecting GSO packets directly would give us more ability to test
corner cases, but perhaps starting simple is good enough?
# ./ksft-net-drv/drivers/net/hw/tso.py
# Detected qstat for LSO wire-packets
KTAP version 1
1..14
ok 1 tso.ipv4 # SKIP Test requires IPv4 connectivity
ok 2 tso.vxlan4_ipv4 # SKIP Test requires IPv4 connectivity
ok 3 tso.vxlan6_ipv4 # SKIP Test requires IPv4 connectivity
ok 4 tso.vxlan_csum4_ipv4 # SKIP Test requires IPv4 connectivity
ok 5 tso.vxlan_csum6_ipv4 # SKIP Test requires IPv4 connectivity
ok 6 tso.gre4_ipv4 # SKIP Test requires IPv4 connectivity
ok 7 tso.gre6_ipv4 # SKIP Test requires IPv4 connectivity
ok 8 tso.ipv6
ok 9 tso.vxlan4_ipv6
ok 10 tso.vxlan6_ipv6
ok 11 tso.vxlan_csum4_ipv6
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre4_ipv6
ok 14 tso.gre6_ipv6
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:7 error:0
Note that the test currently depends on the driver reporting
the LSO count via qstat, which appears to be relatively rare
(virtio, cisco/enic, sfc/efc; but virtio needs host support).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Looks like more and more tests want to iterate over IP version,
run the same test over ipv4 and ipv6. The current naming of
members in the env class makes it a bit awkward, we have
separate members for ipv4 and ipv6 parameters.
Store the parameters inside dicts, so that tests can easily
index them with ip version.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We already record output of ip link for NETIF in env for easy access.
Record the detailed version. TSO test will want to know the max tso size.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250218225426.77726-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Find out and record in env the name of the interface which remote host
will use for the IP address provided via config.
Interface name is useful for mausezahn and for setting up tunnels.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250218225426.77726-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes minor spelling errors:
- `simult_flows.sh`: "al testcases" -> "all testcases"
- `psock_tpacket.c`: "accross" -> "across"
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218165923.20740-1-suchitkarunakaran@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After this patch:
#102/1 flow_dissector_classification/ipv4:OK
#102/2 flow_dissector_classification/ipv4_continue_dissect:OK
#102/3 flow_dissector_classification/ipip:OK
#102/4 flow_dissector_classification/gre:OK
#102/5 flow_dissector_classification/port_range:OK
#102/6 flow_dissector_classification/ipv6:OK
#102 flow_dissector_classification:OK
Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250218043210.732959-5-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
port-range
After this patch:
# ./tc_flower_port_range.sh
TEST: Port range matching - IPv4 UDP [ OK ]
TEST: Port range matching - IPv4 TCP [ OK ]
TEST: Port range matching - IPv6 UDP [ OK ]
TEST: Port range matching - IPv6 TCP [ OK ]
TEST: Port range matching - IPv4 UDP Drop [ OK ]
Cc: Qiang Zhang <dtzq01@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250218043210.732959-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests for FIB rules that match on source and destination ports with
a mask. Test both good and bad flows.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: sport and dport redirect to table [ OK ]
TEST: rule6 check: sport and dport no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport redirect to table [ OK ]
TEST: rule6 check: sport and dport range redirect to table [ OK ]
TEST: rule6 check: sport and dport range no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport range redirect to table [ OK ]
TEST: rule6 check: sport and dport masked redirect to table [ OK ]
TEST: rule6 check: sport and dport masked no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport masked redirect to table [ OK ]
[...]
Tests passed: 292
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, only matching on specific ports is tested. Add port range
testing to make sure this use case does not regress.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If malloc returns NULL due to low memory, 'config' pointer can be NULL.
Add a check to prevent NULL dereference.
Link: https://lore.kernel.org/r/20250219122715.3892223-1-quic_zhonhan@quicinc.com
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Test the TCP_RTO_MAX_MS optname in the existing setget_sockopt test.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250219081333.56378-3-kerneljasonxing@gmail.com
|
|
Add a simple test to verify that the new "override_creds" option works.
Link: https://lore.kernel.org/r/20250219-work-overlayfs-v3-4-46af55e4ceda@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a simple test to verify that the new "override_creds" option works.
Link: https://lore.kernel.org/r/20250219-work-overlayfs-v3-3-46af55e4ceda@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a new set of helpers that will be used in follow-up patches.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a simple test to verify that the new "override_creds" option works.
Link: https://lore.kernel.org/r/20250219-work-overlayfs-v3-2-46af55e4ceda@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix few spelling mistakes in net selftests
Signed-off-by: Chandra Mohan Sundar <chandru.dav@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250217141520.81033-1-chandru.dav@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Iterating through array of maps may encounter non existing keys. The
batch operation should not fail on when this happens.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/9007237b9606dc2ee44465a4447fe46e13f3bea6.1739171594.git.yan@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Following a similar rationale as commit e4835f1da425f ("kunit: tool:
Build compile_commands.json"), make a common developer tool available by
default for KUnit users.
Compared to compile_commands.json, there is a little more work to be
done to build the GDB scripts. Is it enough to affect development cycle
duration? Unscientific evaluation:
rm -rf .kunit; time tools/testing/kunit/kunit.py build --kunitconfig ./lib/kunit/.kunitconfig --jobs 96
Without this patch it took 14.77s, with this patch it took 14.83. So,
although `make scripts_gdb` is pretty slow, presumably most of that is
just the overhead of running Kbuild at all, actually building the
scripts is approximately free.
Note also, to actually get the GDB scripts the user needs to enable
CONFIG_SCRIPTS_GDB, but building the scripts_gdb target without that is
still harmless.
Link: https://lore.kernel.org/r/20250121-kunit-gdb-v1-1-faedfd0653ef@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Q is exported from Makefile.include so it is not necessary to manually
set it.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mykola Lysenko <mykolal@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-2-07de4482a581@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce a new kfunc to retrieve the node associated to a CPU:
int scx_bpf_cpu_node(s32 cpu)
Add the following kfuncs to provide BPF schedulers direct access to
per-node idle cpumasks information:
const struct cpumask *scx_bpf_get_idle_cpumask_node(int node)
const struct cpumask *scx_bpf_get_idle_smtmask_node(int node)
s32 scx_bpf_pick_idle_cpu_node(const cpumask_t *cpus_allowed,
int node, u64 flags)
s32 scx_bpf_pick_any_cpu_node(const cpumask_t *cpus_allowed,
int node, u64 flags)
Moreover, trigger an scx error when any of the non-node aware idle CPU
kfuncs are used when SCX_OPS_BUILTIN_IDLE_PER_NODE is enabled.
Cc: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
