| Age | Commit message (Collapse) | Author |
|---|
|
Abstract the support for MSR_CONFIG_TDP_NOMINAL/LEVEL_1/LEVEL_2/CONTROL
and MSR_TURBO_ACTIVATION_RATIO.
Delete has_config_tdp() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Rename dump_hsw_turbo_ratio_limits() and dump_ivt_turbo_ratio_limits()
to dump_turbo_ratio_limit2() and dump_turbo_ratio_limit1() because they
dump MSR_TURBO_RATIO_LIMIT1/LIMIT2, and the MSRs' behavior is
consistent when they are available.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Abstract the support for MSR_TURBO_RATIO_LIMIT, MSR_TRUBO_RATIO_LIMIT1,
MSR_TURBO_RATIO_LIMIT2, MSR_SECONDARY_TURBO_RATIO_LIMIT,
MSR_ATOM_CORE_RATIOS and MSR_ATOM_CORE_TURBO_RATIOS.
Delete has_turbo_ratio_group_limits(), has_turbo_ratio_limit(),
has_atom_turbo_ratio_limit(), has_ivt_turbo_ratio_limit(),
has_hsw_turbo_ratio_limit(), has_knl_turbo_ratio_limit() and
has_glm_turbo_ratio_limit() CPU model checks.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Rename dump_nhm_platform_info() and dump_nhm_cst_cfg() to
dump_platform_info() and dump_cst_cfg() because these MSRs' behavior is
consistent when they're available.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Platforms with has_msr_misc_pwr_mgmt set is a subset of platforms with
has_nhm_msrs set.
Thus remove the redudant check for platform->has_nhm_msrs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
MSR_PLATFORM_INFO, MSR_IA32_TEMPERATURE_TARGET, MSR_SMI_COUNT,
MSR_PKG_CST_CONFIG_CONTROL, and the TRL MSRs are always available for
platforms since Nehalem. Support for these msrs can be described
altogether.
Abstract the support for these MSRs.
Delete probe_nhm_msrs() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Abstract the support for decoding package cstate limit from
MSR_PKG_CST_CONFIG_CONTROL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Abstract CPU base clock frequency support.
Note that bclk is used by
1. calculate base_hz using MSR_PLATFORM_INFO, which is guarded by
probe_nhm_msrs().
2. dump MSR_PLATFORM_INFO and Turbo Ratio Limit MSRs, which are also
guarded by probe_nhm_msrs().
Thus probe_bclk() works for probe_nhm_msrs() models only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Abstract MSR_MISC_PWR_MGMT support.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Abstract MSR_MISC_FEATURE_CONTROL support.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Turbostat supports a series of features that may diverge among different
CPU models.
Current code uses various of CPU model checks in different places to
handle this, which makes the code hard to maintain.
Add skeleton support for table driven feature enumeration to replace the
current error-prone CPU model checks and global variables.
Note: by comparing the CPU models with intel-family.h, it is found that
turbostat support for below four Models are missing, including
INTEL_FAM6_ICELAKE, INTEL_FAM6_ATOM_SILVERMONT_MID,
INTEL_FAM6_ATOM_AIRMONT_MID and INTEL_FAM6_ATOM_AIRMONT_NP. Adding
support for these models is a different work, thus it is not covered in
this patch set.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
INTEL_FAM6_ATOM_SILVERMONT_MID/INTEL_FAM6_ATOM_AIRMONT_MID are not
listed in probe_nhm_msrs(). This means that most of the turbostat
features are not available on these two platforms.
Further more, checking for these two models in has_slv_msrs() is
dead code. Because has_slv_msrs() is called by the code guarded by
probe_nhm_msrs().
For these two reasons, remove pseudo check for
INTEL_FAM6_ATOM_SILVERMONT_MID and INTEL_FAM6_ATOM_AIRMONT_MID.
Will add back the support when we can access these two platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Remove redundant duplicates in intel_model_duplicates().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Kernel already has
#define INTEL_FAM6_NEHALEM_G 0x1F /* Auburndale / Havendale */
Use standard Macro for CPU Model instead of raw value.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
/sys/class/graphics/fb0/device/drm/card0/ and /sys/class/drm/card0/
point to the same device node.
But in some cases, one exists and the other one does not.
Prefer to use /sys/class/drm/card0/, and fall back to
/sys/class/graphics/fb0/device/drm/card0/.
This recovers the "GFXMHz" and "GFXAMHz" columns on some platforms like
a SPR server.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
All Models that duplicate INTEL_FAM6_CANNONLAKE_L support TCC Offset.
Enable this feature on all these models.
Delete obsolete model_orig.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
Currently the C-state Pre-wake will not be printed due to the
probe has not been invoked. Invoke the probe function accordingly.
Fixes: aeb01e6d71ff ("tools/power turbostat: Print the C-state Pre-wake settings")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
MSR_KNL_CORE_C6_RESIDENCY should be evaluated only if
1. this is KNL platform
AND
2. need to get C6 residency or need to calculate C1 residency
Fix the broken logic introduced by commit 1e9042b9c8d4 ("tools/power
turbostat: Fix CPU%C1 display value").
Fixes: 1e9042b9c8d4 ("tools/power turbostat: Fix CPU%C1 display value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
On some platforms, turbostat fails during launch time like below,
turbostat version 2023.03.17 - Len Brown <lenb@kernel.org>
...
cpu40: MSR_IA32_PACKAGE_THERM_STATUS: 0x884c0000 (24 C)
cpu40: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C)
turbostat: snapshot_sysfs_counter(/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz): No data available
This is because new uncore sysfs is used on these platforms as
introduced by commit 9b8dea80e3cb ("platform/x86/intel-uncore-freq:
Support for cluster level controls").
With the new uncore sysfs interface,
/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz
is still available, but reading it fails.
How to support the fabric cluster level uncore sysfs is not settled yet,
as a short term fix, clear the BIC_UNCORE_MHZ bit when new sysfs I/F is
detected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
|
|
When exit abnormally in process mode, customize SIGINT and SIGTERM signal
handler to kill the forked child processes.
Before:
# perf bench sched messaging -l 1000000 -g 1 &
[1] 8519
# # Running 'sched/messaging' benchmark:
# pgrep sched-messaging | wc -l
41
# kill -15 8519
[1]+ Terminated perf bench sched messaging -l 1000000 -g 1
# pgrep sched-messaging | wc -l
40
After:
# perf bench sched messaging -l 1000000 -g 1 &
[1] 8472
# # Running 'sched/messaging' benchmark:
# pgrep sched-messaging | wc -l
41
# kill -15 8472
[1]+ Exit 1 perf bench sched messaging -l 1000000 -g 1
# pgrep sched-messaging | wc -l
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230923093037.961232-5-yangjihong1@huawei.com
[ namhyung: fix a whitespace ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
process mode
To save pid of child processes when creating worker:
1. The messaging worker is changed to `union` type to store thread id and
process pid.
2. Save child process pid in create_process_worker().
3. Rename `pth_tab` as `work_tab`.
Test result:
# perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 6.744 [sec]
# perf bench sched messaging -t
# Running 'sched/messaging' benchmark:
# 20 sender and receiver threads per group
# 10 groups == 400 threads run
Total time: 5.788 [sec]
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230923093037.961232-4-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Refactor the create_worker() helper:
1. Modify the return value and use pthread pointer as a parameter to
facilitate value assignment in create_worker().
2. The thread worker creation and process worker creation are abstracted
into independent helpers.
No functional change.
Test result:
# perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 6.332 [sec]
# perf bench sched messaging -t
# Running 'sched/messaging' benchmark:
# 20 sender and receiver threads per group
# 10 groups == 400 threads run
Total time: 5.545 [sec]
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230923093037.961232-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Fixed several code style issues in sched-messaging:
1. Use one space around "-" and "+" operators.
2. When a long line is broken, the operator is at the end of the line.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230923093037.961232-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Running shellcheck on some of the shell scripts, throws
below warning on shellcheck v0.6. Example:
In tests/shell/coresight/asm_pure_loop.sh line 14:
DATA="$DATD/perf-$TEST-$DATV.data"
^---^ SC2153: Possible misspelling: DATD may not be assigned, but DATA is.
Here, DATD is exported from "lib/coresight.sh" and this
warning can be ignored. Use "shellcheck disable=" to ignore
this check.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Running shellcheck on stat+shadow_stat.sh generates below
warning
In tests/shell/stat+csv_summary.sh line 26:
while read _num _event _run _pct
^--^ SC2034: _num appears unused. Verify use (or export if used externally).
^----^ SC2034: _event appears unused. Verify use (or export if used externally).
^--^ SC2034: _run appears unused. Verify use (or export if used externally).
^--^ SC2034: _pct appears unused. Verify use (or export if used externally).
This variable is intentionally unused since it is
needed to parse through the output. commit used "_"
as a prefix for this throw away variable. But this
stil shows warning with shellcheck v0.6. Fix this
by only using "_" instead of prefix and variable name.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Running shellcheck on some of the shell scripts throws
below error:
In tests/shell/coresight/unroll_loop_thread_10.sh line 8:
. "$(dirname $0)"/../lib/coresight.sh
^-- SC1090: Can't follow non-constant source. Use a directive to specify location.
This happens on shellcheck version "0.6.0". Fix shellcheck
warning for SC1090 using "shellcheck source="i option to mention
the location of sourced files.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There is a spelling mistake in a pr_debug message. Fix it.
(I didn't see this one in the first spell check scan I ran).
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20230925055037.18089-1-colin.i.king@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Dummy events are created with an attribute where the period and freq
are zero. evsel__config will then see the uninitialized values and
initialize them in evsel__default_freq_period. As fequency mode is
used by default the dummy event would be set to use frequency
mode. However, this has no effect on the dummy event but does cause
unnecessary timers/interrupts. Avoid this overhead by setting the
period to 1 for dummy events.
evlist__add_aux_dummy calls evlist__add_dummy then sets freq=0 and
period=1. This isn't necessary after this change and so the setting is
removed.
From Stephane:
The dummy event is not counting anything. It is used to collect mmap
records and avoid a race condition during the synthesize mmap phase of
perf record. As such, it should not cause any overhead during active
profiling. Yet, it did. Because of a bug the dummy event was
programmed as a sampling event in frequency mode. Events in that mode
incur more kernel overheads because on timer tick, the kernel has to
look at the number of samples for each event and potentially adjust
the sampling period to achieve the desired frequency. The dummy event
was therefore adding a frequency event to task and ctx contexts we may
otherwise not have any, e.g.,
perf record -a -e cpu/event=0x3c,period=10000000/.
On each timer tick the perf_adjust_freq_unthr_context() is invoked and
if ctx->nr_freq is non-zero, then the kernel will loop over ALL the
events of the context looking for frequency mode ones. In doing, so it
locks the context, and enable/disable the PMU of each hw event. If all
the events of the context are in period mode, the kernel will have to
traverse the list for nothing incurring overhead. The overhead is
multiplied by a very large factor when this happens in a guest kernel.
There is no need for the dummy event to be in frequency mode, it does
not count anything and therefore should not cause extra overhead for
no reason.
Fixes: 5bae0250237f ("perf evlist: Introduce perf_evlist__new_dummy constructor")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230916035640.1074422-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Remove the repeated word "of" in comments.
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: james.clark@arm.com
Cc: nick.forrington@arm.com
Cc: leo.yan@linaro.org
Cc: mike.leach@linaro.org
Cc: john.g.garry@oracle.com
Cc: ilkka@os.amperecomputing.com
Link: https://lore.kernel.org/r/20230918033623.159213-1-hanchunchao@inspur.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This patch addresses review comments that were given for
705ed549148f ("perf vendor events arm64: Add AmpereOne metrics")
but didn't make it to the original patch [1][2]
Changes include: A fix for backend_memory formula, use of standard metrics
when possible, using #slots, renaming metrics to avoid spaces in the names,
and cleanup.
[1] https://lore.kernel.org/linux-perf-users/e9bdacb-a231-36af-6a2e-6918ee7effa@os.amperecomputing.com/
[2] https://lore.kernel.org/linux-perf-users/20230826192352.3043220-1-ilkka@os.amperecomputing.com/
Fixes: 705ed549148f ("perf vendor events arm64: Add AmpereOne metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230920061839.2437413-1-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The perf_pmu__parse_* functions for the sysfs files of pmu event’s
scale, unit, per-pkg and snapshot were updated in commit 7b723dbb96e8
("perf pmu: Be lazy about loading event info files from sysfs").
However, the paths for these sysfs files were incorrect. This resulted
in perf stat reporting values with wrong scaling and missing units. This
is fixed by correcting the paths for these sysfs files.
Before this fix:
$sudo perf stat -e power/energy-pkg/ -- sleep 2
Performance counter stats for 'system wide':
351,217,188,864 power/energy-pkg/
2.004127961 seconds time elapsed
After this fix:
$sudo perf stat -e power/energy-pkg/ -- sleep 2
Performance counter stats for 'system wide':
80.58 Joules power/energy-pkg/
2.004009749 seconds time elapsed
Fixes: 7b723dbb96e8 ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ravi.bangoria@amd.com
Cc: sandipan.das@amd.com
Cc: james.clark@arm.com
Cc: kan.liang@linux.intel.com
Link: https://lore.kernel.org/r/20230920122349.418673-1-wyes.karny@amd.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When building with Clang, I am getting many warnings from the selftests/rseq tree.
Here's one such example from rseq tree:
| param_test.c:1234:10: error: address argument to atomic operation must be a pointer to _Atomic type ('intptr_t *' (aka 'long *') invalid)
| 1234 | while (!atomic_load(&args->percpu_list_ptr)) {}
| | ^ ~~~~~~~~~~~~~~~~~~~~~~
| /usr/local/google/home/justinstitt/repos/tc-build/build/llvm/final/lib/clang/18/include/stdatomic.h:140:29: note: expanded from macro 'atomic_load'
| 140 | #define atomic_load(object) __c11_atomic_load(object, __ATOMIC_SEQ_CST)
| | ^ ~~~~~~
Use compiler builtins `__atomic_load_n()` and `__atomic_store_n()` with
accompanying __ATOMIC_ACQUIRE and __ATOMIC_RELEASE, respectively. This
will fix the warnings because the compiler builtins do not expect their
arguments to have _Atomic type. This should also make TSAN happier.
Link: https://github.com/ClangBuiltLinux/linux/issues/1698
Link: https://github.com/ClangBuiltLinux/continuous-integration2/issues/61
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When running the test for the damon subsystem, there are a lot of
warnings because test scripts do not have executable permission,
for example:
Warning: file debugfs_attrs.sh is not executable
Warning: file debugfs_schemes.sh is not executable
Warning: file debugfs_target_ids.sh is not executable
...
This patch adds executable permission to test scripts to eliminate
these warnings.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The 'uevents' subdirectory does not exist in tools/testing/selftests/
and adding 'uevents' to the TARGETS list results in the following error:
make[1]: Entering directory 'xx/tools/testing/selftests/uevents'
make[1]: *** No targets specified and no makefile found. Stop.
make[1]: Leaving directory 'xx/tools/testing/selftests/uevents'
What actually exists in tools/testing/selftests/ is the 'uevent'
subdirectory.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The point in iterating variant->mock_domains is to test the idev_ids[0]
and idev_ids[1]. So use it instead of keeping testing idev_ids[0] only.
Link: https://lore.kernel.org/r/20230919011637.16483-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One single fix to unmount tracefs when test created mount"
* tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/user_events: Fix to unmount tracefs when test created mount
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Build:
- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.
- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.
- Other minor build fixes.
Misc:
- Fix uninitialized memory access in PMU parsing code
- Fix segfaults on software event"
* tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf jevent: fix core dump on software events on s390
perf pmu: Ensure all alias variables are initialized
perf jevents metric: Fix type of strcmp_cpuid_str
perf trace: Avoid compile error wrt redefining bool
perf bpf-prologue: Remove unused file
tools headers UAPI: Update tools's copy of drm.h headers
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf bench sched-seccomp-notify: Use the tools copy of seccomp.h UAPI
tools headers UAPI: Copy seccomp.h to be able to build 'perf bench' in older systems
tools headers UAPI: Sync files changed by new fchmodat2 and map_shadow_stack syscalls with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
|
|
Adding selftest that puts kprobe on bpf_fentry_test1 that calls bpf_printk
and invokes bpf_trace_printk tracepoint. The bpf_trace_printk tracepoint
has test[234] programs attached to it.
Because kprobe execution goes through bpf_prog_active check, programs
attached to the tracepoint will fail the recursion check and increment the
recursion_misses stats.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-10-jolsa@kernel.org
|
|
Adding selftest that puts kprobe.multi on bpf_fentry_test1 that
calls bpf_kfunc_common_test kfunc which has 3 perf event kprobes
and 1 kprobe.multi attached.
Because fprobe (kprobe.multi attach layear) does not have strict
recursion check the kprobe's bpf_prog_active check is hit for test2-5.
Disabling this test for arm64, because there's no fprobe support yet.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-9-jolsa@kernel.org
|
|
Adding test that puts kprobe on bpf_fentry_test1 that calls
bpf_kfunc_common_test kfunc, which has also kprobe on.
The latter won't get triggered due to kprobe recursion check
and kprobe missed counter is incremented.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-8-jolsa@kernel.org
|
|
Adding 'missed' field to display missed counts for kprobes
attached by perf event link, like:
# bpftool link
5: perf_event prog 82
kprobe ffffffff815203e0 ksys_write
6: perf_event prog 83
kprobe ffffffff811d1e50 scheduler_tick missed 682217
# bpftool link -jp
[{
"id": 5,
"type": "perf_event",
"prog_id": 82,
"retprobe": false,
"addr": 18446744071584220128,
"func": "ksys_write",
"offset": 0,
"missed": 0
},{
"id": 6,
"type": "perf_event",
"prog_id": 83,
"retprobe": false,
"addr": 18446744071580753488,
"func": "scheduler_tick",
"offset": 0,
"missed": 693469
}
]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-7-jolsa@kernel.org
|
|
Adding 'missed' field to display missed counts for kprobes
attached by kprobe multi link, like:
# bpftool link
5: kprobe_multi prog 76
kprobe.multi func_cnt 1 missed 1
addr func [module]
ffffffffa039c030 fp3_test [fprobe_test]
# bpftool link -jp
[{
"id": 5,
"type": "kprobe_multi",
"prog_id": 76,
"retprobe": false,
"func_cnt": 1,
"missed": 1,
"funcs": [{
"addr": 18446744072102723632,
"func": "fp3_test",
"module": "fprobe_test"
}
]
}
]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-6-jolsa@kernel.org
|
|
Add missed value to kprobe attached through perf link info to
hold the stats of missed kprobe handler execution.
The kprobe's missed counter gets incremented when kprobe handler
is not executed due to another kprobe running on the same cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org
|
|
Add missed value to kprobe_multi link info to hold the stats of missed
kprobe_multi probe.
The missed counter gets incremented when fprobe fails the recursion
check or there's no rethook available for return probe. In either
case the attached bpf program is not executed.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-3-jolsa@kernel.org
|
|
Add tests for new API ring__consume.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-15-martin.kelly@crowdstrike.com
|
|
Add ring__consume to consume a single ringbuffer, analogous to
ring_buffer__consume.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-14-martin.kelly@crowdstrike.com
|
|
Add tests for the new API ring__map_fd.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-13-martin.kelly@crowdstrike.com
|
|
Add ring__map_fd to get the file descriptor underlying a given
ringbuffer.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-12-martin.kelly@crowdstrike.com
|
|
Add tests for the new API ring__size.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-11-martin.kelly@crowdstrike.com
|
|
Add ring__size to get the total size of a given ringbuffer.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-10-martin.kelly@crowdstrike.com
|
