| Age | Commit message (Collapse) | Author |
|---|
|
The irritator handlers for the fp-stress test programs all use ADR to load
an address into x0 which is then not referenced. Remove these ADRs as they
just cause confusion.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-2-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The comments in the handlers for the irritator signal in the test threads
for fp-stress suggest that the irritator will corrupt the register state
observed by the main thread but this is not the case, instead the FPSIMD
and SVE irritators (which are the only ones that are implemented) modify
the current register state which is expected to be overwritten on return
from the handler by the saved register state. Update the comment to reflect
what the handler is actually doing.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-1-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
While fp-stress is waiting for children to start it doesn't send any
signals to them so there is no need for it to have as short an epoll()
timeout as it does when the children are all running. We do still want to
have some timeout so that we can log diagnostics about missing children but
this can be relatively large. On emulated platforms the overhead of running
the supervisor process is quite high, especially during the process of
execing the test binaries.
Implement a longer epoll() timeout during the setup phase, using a 5s
timeout while waiting for children and switching to the signal raise
interval when all the children are started and we start sending signals.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-2-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we only deliver signals to the processes being tested about once
a second, meaning that the signal code paths are subject to relatively
little stress. Increase this frequency substantially to 25ms intervals,
along with some minor refactoring to make this more readily tuneable and
maintain the 1s logging interval. This interval was chosen based on some
experimentation with emulated platforms to avoid causing so much extra load
that the test starts to run into the 45s limit for selftests or generally
completely disconnect the timeout numbers from the
We could increase this if we moved the signal generation out of the main
supervisor thread, though we should also consider that he percentage of
time that we spend interacting with the floating point state is also a
consideration.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-1-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Support setting the word delay using the -w/--word-delay command line
parameter. Note that spidev exposes word delay only as an u8, allowing
for a maximum of 255us of delay to be inserted.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20241107-spidev-test-word-delay-v1-1-d4bba5569e39@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the mitigation patching test errors out if the kernel is
tainted prior to the test running.
That causes the test to fail unnecessarily if some other test has caused
the kernel to be tainted, or if a proprietary or force module is loaded
for example.
Instead just warn if the kernel is tainted to begin with, and only
report a change in the taint state as an error in the test.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-5-mpe@ellerman.id.au
|
|
Fix some tests which weren't returning an error code from main.
Although these tests only ever return success, they can still fail if
they time out and the harness kills them. If that happens they still
return success to the shell, which is incorrect and confuses the higher
level error reporting.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-4-mpe@ellerman.id.au
|
|
Starting with Ubuntu 24.04, building the selftests with the big endian
compiler (which defaults to 32-bit) fails with errors:
stack_expansion_ldst.c:178:37: error: format '%lx' expects argument
of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'}
subpage_prot.c:214:38: error: format '%lx' expects argument of type
'long unsigned int', but argument 3 has type 'off_t' {aka 'long long int'}
Prior to 24.04 rlim_t was long unsigned int, and off_t was long int.
Cast to unsigned long long and long long before passing to printf to
avoid the errors.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-3-mpe@ellerman.id.au
|
|
Each of the powerpc selftests runs with a timeout of 2 minutes by
default (see tools/testing/selftests/powerpc/harness.c).
But when tests are run with run_kselftest.sh it uses a timeout of 45
seconds, meaning some tests run OK standalone but fail when run with the
test runner.
So tell run_kselftest.sh to give each test 130 seconds, that should
allow the tests to complete, or be killed by the powerpc test harness
after 2 minutes. If for some reason the harness fails, or for the few
tests that don't use the harness, the 130 second timeout should catch
them if they get stuck.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-2-mpe@ellerman.id.au
|
|
The count_stcx_fail test runs for close to or just over 2 minutes, which
means it sometimes times out.
That's overkill for a test that just demonstrates some PMU counters
are working. Drop the 64 billion instruction case, to lower the runtime
to ~30s.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-1-mpe@ellerman.id.au
|
|
Patch series "fix error handling in mmap_region() and refactor", v3.
The mmap_region() function is somewhat terrifying, with spaghetti-like
control flow and numerous means by which issues can arise and incomplete
state, memory leaks and other unpleasantness can occur.
This series goes to great lengths to simplify how mmap_region() works and
to avoid unwinding errors late on in the process of setting up the VMA for
the new mapping, and equally avoids such operations occurring while the
VMA is in an inconsistent state.
This series builds on the previously submitted hotfix patches (see link to
v2 below) which addresses the most critical issues around mmap_region(),
and further works to improve mmap_region() complexity, stability, and
testability.
This series moves the code to mm/vma.c to render it userland testable,
refactors and simplifies it into smaller functions that are significantly
more readable.
It additionally avoids performing an attempt at a second merge mid-way
through allocating a new VMA, a dubious proposition at best and one that
is highly subject to subtle bugs.
Rather than do this, we simply note that we ought to retry the merge and
do this as a final step.
This patch (of 3):
Add some additional vma_internal.h stubs in preparation for
__mmap_region() being moved to mm/vma.c. Without these the move would
result in the tests no longer compiling.
Link: https://lkml.kernel.org/r/cover.1729858176.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/74b27e159e261d2ac1fe66a130edad1d61fdc176.1729858176.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The comm_str memory needs to be freed if the search_pattern function call
fails in get_comm
[akpm@linux-foundation.org: fix whitespace]
Link: https://lkml.kernel.org/r/20241022012526.7597-1-liujing@cmss.chinamobile.com
Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The phys_addr_t size is predicated on whether CONFIG_PHYS_ADDR_T_64BIT is
set or not.
In the VMA tests, virt_to_phys() from tools/include/linux casts a volatile
void * pointer to phys_addr_t, if CONFIG_PHYS_ADDR_T_64BIT is not set,
this will be 32-bit and trigger a warning.
Obviously this might also lead to truncation, which we would rather avoid.
Fix this by adjusting the generation of generated/bit-length.h to generate
a CONFIG_PHYS_ADDR_T{bits}BIT define.
This does result in the generation of the useless CONFIG_PHYS_ADDR_T_32BIT
define for 32-bit systems, but this should have no effect, and makes
implementation of this easier.
This resolves the issue and the warning.
[lorenzo.stoakes@oracle.com: VMA tests not properly importing bit-length.h]
Link: https://lkml.kernel.org/r/a6183df9-3108-4d59-8128-4fc6c14e22a5@lucifer.local
Link: https://lkml.kernel.org/r/20241017165638.95602-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add some maple_tree alloc node tese case.
Link: https://lkml.kernel.org/r/20240626160631.3636515-2-Liam.Howlett@oracle.com
Signed-off-by: Jiazi Li <jqqlijiazi@gmail.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A recent refactor transformed the check for process completion
in a true statement, due to a typo.
As a result, the relevant test-case is unable to catch the
regression it was supposed to detect.
Restore the correct condition.
Fixes: 691bb4e49c98 ("selftests: net: avoid just another constant wait")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/0e6f213811f8e93a235307e683af8225cc6277ae.1730828007.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add more tests for test_txmsg_push_pop in test_sockmap for better coverage
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-6-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add push/pop checking for msg_verify_data in test_sockmap, except for
pop/push with cork tests, in these tests the logic will be different.
1. With corking, pop/push might not be invoked in each sendmsg, it makes
the layout of the received data difficult
2. It makes it hard to calculate the total_bytes in the recvmsg
Temporarily skip the data integrity test for these cases now, added a TODO
Fixes: ee9b352ce465 ("selftests/bpf: Fix msg_verify_data in test_sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-5-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
total_bytes in msg_loop_rx should also take push into account, otherwise
total_bytes will be a smaller value, which makes the msg_loop_rx end early.
Besides, total_bytes has already taken pop into account, so we don't need
to subtract some bytes from iov_buf in sendmsg_test. The additional
subtraction may make total_bytes a negative number, and msg_loop_rx will
just end without checking anything.
Fixes: 18d4e900a450 ("bpf: Selftests, improve test_sockmap total bytes counter")
Fixes: d69672147faa ("selftests, bpf: Add one test for sockmap with strparser")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent
cnt times by sendfile.
1. In push/pop tests, they will be invoked cnt times, for the simplicity of
msg_verify_data, change chunk_sz to iov_length
2. Change iov_length in test_send_large from 1024 to 8192. We have pop test
where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add txmsg_pass to test_txmsg_pull/push/pop. If txmsg_pass is missing,
tx_prog will be NULL, and no program will be attached to the sockmap.
As a result, pull/push/pop are never invoked.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.
Commit 78ff64081949 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility. It is
ignored when it is set. Fix the code so that it recognises the option
again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future"
* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/selftests: Add tracefs mount options test
tracing: Document tracefs gid mount option
tracing: Fix tracefs mount options
|
|
Stable tag for bpf-next's uprobe work.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
In the presence of both weak and strong function definitions, the
linker drops the weak symbol in favor of a strong symbol, but
leaves the code in place. Code in ignore_unreachable_insn() has
some heuristics to suppress the warning, but it does not work when
-ffunction-sections is enabled.
Suppose function foo has both strong and weak definitions.
Case 1: The strong definition has an annotated section name,
like .init.text. Only the weak definition will be placed into
.text.foo. But since the section has no symbols, there will be no
"hole" in the section.
Case 2: Both sections are without an annotated section name.
Both will be placed into .text.foo section, but there will be only one
symbol (the strong one). If the weak code is before the strong code,
there is no "hole" as it fails to find the right-most symbol before
the offset.
The fix is to use the first node to compute the hole if hole.sym
is empty. If there is no symbol in the section, the first node
will be NULL, in which case, -1 is returned to skip the whole
section.
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add the build support for using Clang's AutoFDO. Building the kernel
with AutoFDO does not reduce the optimization level from the
compiler. AutoFDO uses hardware sampling to gather information about
the frequency of execution of different code paths within a binary.
This information is then used to guide the compiler's optimization
decisions, resulting in a more efficient binary. Experiments
showed that the kernel can improve up to 10% in latency.
The support requires a Clang compiler after LLVM 17. This submission
is limited to x86 platforms that support PMU features like LBR on
Intel machines and AMD Zen3 BRS. Support for SPE on ARM 1,
and BRBE on ARM 1 is part of planned future work.
Here is an example workflow for AutoFDO kernel:
1) Build the kernel on the host machine with LLVM enabled, for example,
$ make menuconfig LLVM=1
Turn on AutoFDO build config:
CONFIG_AUTOFDO_CLANG=y
With a configuration that has LLVM enabled, use the following
command:
scripts/config -e AUTOFDO_CLANG
After getting the config, build with
$ make LLVM=1
2) Install the kernel on the test machine.
3) Run the load tests. The '-c' option in perf specifies the sample
event period. We suggest using a suitable prime number,
like 500009, for this purpose.
For Intel platforms:
$ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \
-o <perf_file> -- <loadtest>
For AMD platforms:
The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2
For Zen3:
$ cat proc/cpuinfo | grep " brs"
For Zen4:
$ cat proc/cpuinfo | grep amd_lbr_v2
$ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \
-N -b -c <count> -o <perf_file> -- <loadtest>
4) (Optional) Download the raw perf file to the host machine.
5) To generate an AutoFDO profile, two offline tools are available:
create_llvm_prof and llvm_profgen. The create_llvm_prof tool is part
of the AutoFDO project and can be found on GitHub
(https://github.com/google/autofdo), version v0.30.1 or later. The
llvm_profgen tool is included in the LLVM compiler itself. It's
important to note that the version of llvm_profgen doesn't need to
match the version of Clang. It needs to be the LLVM 19 release or
later, or from the LLVM trunk.
$ llvm-profgen --kernel --binary=<vmlinux> --perfdata=<perf_file> \
-o <profile_file>
or
$ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \
--format=extbinary --out=<profile_file>
Note that multiple AutoFDO profile files can be merged into one via:
$ llvm-profdata merge -o <profile_file> <profile_1> ... <profile_n>
6) Rebuild the kernel using the AutoFDO profile file with the same config
as step 1, (Note CONFIG_AUTOFDO_CLANG needs to be enabled):
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<profile_file>
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Corrected minor typo in tools/virtio/vringh_test.c:
- Fixed "retreives" to "retrieves"
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Message-Id: <20241008145204.478749-1-cvam0000@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
trace__fprintf_tp_fields may not print any tracepoint arguments. E.g., if the
argument values are all zero. Previously, this would result in a totally
uninitialized buffer being passed to fprintf, which could lead to garbage on the
console. Fix the problem by passing the number of initialized bytes fprintf.
Fixes: f11b2803bb88 ("perf trace: Allow choosing how to augment the tracepoint arguments")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241103204816.7834-1-benjamin@engflow.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Updated to a more recent socat release and saw this:
socat E xioopen_ipdgram_listen(): unknown address family 0
socat W address is opened in read-write mode but only supports read-only
First error is avoided via pf=ipv4 option, second one via -u
(unidirectional) mode.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20241104142821.2608-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test will fail if the initial namespace has conntrack
active due to unexpected number of flows returned on dump:
conntrack_dump_flush.c:451:test_flush_by_zone:Expected ret (7) == 2 (2)
test_flush_by_zone: Test failed
FAIL conntrack_dump_flush.test_flush_by_zone
not ok 2 conntrack_dump_flush.test_flush_by_zone
Add a wrapper that unshares this program to avoid this problem.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20241104142529.2352-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since there are no longer any header include differences between
lib/list_sort.c and tools/lib/list_sort.c, update the expected diff in
check-header_ignore_hunks accordingly.
Link: https://lkml.kernel.org/r/20241012042828.471614-4-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since lib/list_sort.c no longer requires ARRAY_SIZE() and memset(), the
includes for kernel.h, bug.h, and string.h have been removed. Similarly,
tools/lib/list_sort.c also does not need to include these headers, so they
have been removed as well.
Link: https://lkml.kernel.org/r/20241012042828.471614-3-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix the following -Wunused-result warnings on posix_memalign()
return values and add error handling.
./shared/linux.c:100:25: warning: ignoring return value of `posix_memalign' declared with attribute `warn_unused_result' [-Wunused-result]
100 | posix_memalign(&p, cachep->align, cachep->size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../shared/linux.c: In function `kmem_cache_alloc_bulk':
../shared/linux.c:198:33: warning: ignoring return value of `posix_memalign' declared with attribute `warn_unused_result' [-Wunused-result]
198 | posix_memalign(&p[i], cachep->align,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
199 | cachep->size);
| ~~~~~~~~~~~~~
Link: https://lkml.kernel.org/r/20241011225155.27607-1-skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's explicitly ensure the destination string is NUL-terminated. This
way, it won't be affected by changes to the source string.
Link: https://lkml.kernel.org/r/20241007144911.27693-5-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Cc: Alejandro Colomar <alx@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matus Jokay <matus.jokay@stuba.sk>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
By reading the code, I found these variables are never referenced in the
code. Just remove them.
Link: https://lkml.kernel.org/r/20240924021426.1980-1-bajing@cmss.chinamobile.com
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's improve the test output. For example, print the proper test result.
Install a SIGBUS handler to catch any SIGBUS instead of crashing the test
on failure.
With unsuitable hugetlb page count:
$ ./hugetlb_fault_after_madv
TAP version 13
1..1
# [INFO] detected default hugetlb page size: 2048 KiB
ok 2 # SKIP This test needs one and only one page to execute. Got 0
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
On a failure:
$ ./hugetlb_fault_after_madv
TAP version 13
1..1
not ok 1 SIGBUS behavior
Bail out! 1 out of 1 tests failed
On success:
$ ./hugetlb_fault_after_madv
TAP version 13
1..1
# [INFO] detected default hugetlb page size: 2048 KiB
ok 1 SIGBUS behavior
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/20240926152044.2205129-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: hugetlb_fault_after_madv improvements".
Mario brought to my attention that the hugetlb_fault_after_madv test is
currently always skipped on s390x. Let's adjust the test to be
independent of the default hugetlb page size and while at it, also improve
the test output.
This patch (of 2):
We currently assume that the hugetlb page size is 2 MiB, which is why we
mmap() a 2 MiB range.
Is the default hugetlb size is larger, mmap() will fail because the range
is not suitable. If the default hugetlb size is smaller (e.g., s390x),
mmap() will fail because we would need more than one hugetlb page, but
just asserted that we have exactly one.
So let's simply use the default hugetlb page size instead of hard-coded 2
MiB, so the test isn't unconditionally skipped on architectures like
s390x.
Before this patch on s390x:
$ ./hugetlb_fault_after_madv
1..0 # SKIP Failed to allocated huge page
With this change on s390x:
$ ./hugetlb_fault_after_madv
While at it, make "huge_ptr" static.
Link: https://lkml.kernel.org/r/20240926152044.2205129-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240926152044.2205129-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Mario Casquero <mcasquer@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 6998a73efbb8 ("selftests/mm: Add new testcases for pkeys") and
commit 3a103b5315b7 ("selftest: mm: Test if hugepage does not get leaked
during __bio_release_pages()") generate test binaries hugetlb_dio,
pkey_sighandler_tests_32 and pkey_sighandler_tests_64 but did not add
these to .gitignore. Correct this.
Link: https://lkml.kernel.org/r/20240924185911.117937-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Keith Lucas <keith.lucas@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Recently, the net/lib.sh file has been modified to include defer.sh from
net/lib/sh/ directory. The Makefile from net/lib has been modified
accordingly, but not the ones from the sub-targets using net/lib.sh.
Because of that, the new file is not installed as expected when
installing the Forwarding, MPTCP, and Netfilter targets, e.g.
# make -C tools/testing/selftests TARGETS=net/mptcp install \
INSTALL_PATH=/tmp/kself
# cd /tmp/kself/
# ./run_kselftest.sh -c net/mptcp
TAP version 13
1..7
# timeout set to 1800
# selftests: net/mptcp: mptcp_connect.sh
# ./../lib.sh: line 5: /tmp/kself/net/lib/sh/defer.sh: No such file
or directory
# (...)
This can be fixed simply by adding all the .sh files from net/lib/sh
directory to the TEST_INCLUDES variable in the different Makefile's.
Fixes: a6e263f125cd ("selftests: net: lib: Introduce deferred commands")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241104-net-next-selftests-lib-sh-deps-v1-1-7c9f7d939fc2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New netns selftest helpers netns_new() and netns_free() has been added
in network_helpers.c, let's use them in mptcp selftests too instead of
using MPTCP's own helpers create_netns() and cleanup_netns().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/c02fda3177b34f9e74a044833fda9761627f4d07.1730338692.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
As reported by Byeonguk, the bad_words test in verifier_bits_iter.c
occasionally fails on s390 host. Quoting Ilya's explanation:
s390 kernel runs in a completely separate address space, there is no
user/kernel split at TASK_SIZE. The same address may be valid in both
the kernel and the user address spaces, there is no way to tell by
looking at it. The config option related to this property is
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
Also, unfortunately, 0 is a valid address in the s390 kernel address
space.
Fix the issue by using -4095 as the bad address for bits iterator, as
suggested by Ilya. Verify that bpf_iter_bits_new() returns -EINVAL for
NULL address and -EFAULT for bad address.
Fixes: ebafc1e535db ("selftests/bpf: Add three test cases for bits_iter")
Reported-by: Byeonguk Jeong <jungbu2855@gmail.com>
Closes: https://lore.kernel.org/bpf/ZycSXwjH4UTvx-Cn@ub22/
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20241105043057.3371482-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
0e7ffff1b811 ("scx: Fix raciness in scx_ops_bypass()") converted
scx_ops_bypass_depth from an atomic to an int. Update scx_show_state.py
accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 0e7ffff1b811 ("scx: Fix raciness in scx_ops_bypass()")
|
|
We need the char/misc/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During the parallel testing, I've noticed some ftrace test failures. It
seems the regex pattern checks 100 msec of nanosleep with the error
range of 10 msec. But sometimes it's affected by other processes and
resulted in more time in the syscall.
The following output shows that it took more than 120 msec and failed.
Let's update the regex pattern so that it can allow more drifts.
perf ftrace profile test
# Total (us) Avg (us) Max (us) Count Function
121279.500 121279.500 121279.500 1 __x64_sys_clock_nanosleep
121278.400 121278.400 121278.400 1 common_nsleep
121277.800 121277.800 121277.800 1 hrtimer_nanosleep
121277.100 121277.100 121277.100 1 do_nanosleep
341760.289 56960.048 121273.400 6 schedule
176.200 25.171 31.616 7 scheduler_tick
0.923 0.923 0.923 1 native_smp_send_reschedule
345522.360 69104.472 345320.600 5 __x64_sys_execve
345486.585 69097.317 345312.700 5 do_execveat_common.isra.0
340730.300 340730.300 340730.300 1 bprm_execve
1.758 0.879 0.883 2 sched_mm_cid_before_execve
1.112 1.112 1.112 1 sched_mm_cid_after_execve
---- end(-1) ----
81: perf ftrace tests : FAILED!
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241102231702.2262258-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Since the C test wrapper for attr.py was removed we don't have an attr.o
object for that CFLAGS_attr.o to apply for, remove it.
Fixes: 3a447031f5fc21c4 ("perf test: Remove C test wrapper for attr.py")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/ZyjbksKYnV22zmz-@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Instead of adding specific shellcheck_log files to the gitignore, add
all of them to prevent these files from cluttering the git status.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241104-shellcheck_gitignore-v1-1-ffc179f57dc9@rivosinc.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When building with custom libtraceevent, below errors occur:
$ make -C tools/perf NO_LIBPYTHON=1 PKG_CONFIG_PATH=<custom libtraceevent>
In file included from util/session.h:5,
from builtin-buildid-list.c:17:
util/trace-event.h:153:10: fatal error: traceevent/event-parse.h: No such file or directory
153 | #include <traceevent/event-parse.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
<snip similar errors of missing headers>
This is because the include path is missed in the cflags. Add it.
Fixes: 0f0e1f445690 ("perf build: Use pkg-config for feature check for libtrace{event,fs}")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Guilherme Amadio <amadio@gentoo.org>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20241024133236.31016-1-yangyicong@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The cpu-list part of this testcase has proven itself to be unreliable.
Sometimes, we get "<not counted>" for system.slice when pinned to CPUs
0 and 1. In such case, the test fails.
Since we cannot simply guarantee that any system.slice load will run
on any arbitrary list of CPUs, except the whole set of all CPUs, let's
rather remove the cpu-list subtest.
Fixes: a84260e314029e6dc9904fd ("perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: vmolnaro@redhat.com
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20241101102812.576425-1-mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Force -march=x86-64-v2 to avoid SSE/AVX instructions if and only if the
uarch definition is supported by the compiler, e.g. gcc 7.5 only supports
x86-64.
Fixes: 9a400068a158 ("KVM: selftests: x86: Avoid using SSE/AVX instructions")
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-and-tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241031045333.1209195-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Disable strict aliasing, as has been done in the kernel proper for decades
(literally since before git history) to fix issues where gcc will optimize
away loads in code that looks 100% correct, but is _technically_ undefined
behavior, and thus can be thrown away by the compiler.
E.g. arm64's vPMU counter access test casts a uint64_t (unsigned long)
pointer to a u64 (unsigned long long) pointer when setting PMCR.N via
u64p_replace_bits(), which gcc-13 detects and optimizes away, i.e. ignores
the result and uses the original PMCR.
The issue is most easily observed by making set_pmcr_n() noinline and
wrapping the call with printf(), e.g. sans comments, for this code:
printf("orig = %lx, next = %lx, want = %lu\n", pmcr_orig, pmcr, pmcr_n);
set_pmcr_n(&pmcr, pmcr_n);
printf("orig = %lx, next = %lx, want = %lu\n", pmcr_orig, pmcr, pmcr_n);
gcc-13 generates:
0000000000401c90 <set_pmcr_n>:
401c90: f9400002 ldr x2, [x0]
401c94: b3751022 bfi x2, x1, #11, #5
401c98: f9000002 str x2, [x0]
401c9c: d65f03c0 ret
0000000000402660 <test_create_vpmu_vm_with_pmcr_n>:
402724: aa1403e3 mov x3, x20
402728: aa1503e2 mov x2, x21
40272c: aa1603e0 mov x0, x22
402730: aa1503e1 mov x1, x21
402734: 940060ff bl 41ab30 <_IO_printf>
402738: aa1403e1 mov x1, x20
40273c: 910183e0 add x0, sp, #0x60
402740: 97fffd54 bl 401c90 <set_pmcr_n>
402744: aa1403e3 mov x3, x20
402748: aa1503e2 mov x2, x21
40274c: aa1503e1 mov x1, x21
402750: aa1603e0 mov x0, x22
402754: 940060f7 bl 41ab30 <_IO_printf>
with the value stored in [sp + 0x60] ignored by both printf() above and
in the test proper, resulting in a false failure due to vcpu_set_reg()
simply storing the original value, not the intended value.
$ ./vpmu_counter_access
Random seed: 0x6b8b4567
orig = 3040, next = 3040, want = 0
orig = 3040, next = 3040, want = 0
==== Test Assertion Failure ====
aarch64/vpmu_counter_access.c:505: pmcr_n == get_pmcr_n(pmcr)
pid=71578 tid=71578 errno=9 - Bad file descriptor
1 0x400673: run_access_test at vpmu_counter_access.c:522
2 (inlined by) main at vpmu_counter_access.c:643
3 0x4132d7: __libc_start_call_main at libc-start.o:0
4 0x413653: __libc_start_main at ??:0
5 0x40106f: _start at ??:0
Failed to update PMCR.N to 0 (received: 6)
Somewhat bizarrely, gcc-11 also exhibits the same behavior, but only if
set_pmcr_n() is marked noinline, whereas gcc-13 fails even if set_pmcr_n()
is inlined in its sole caller.
Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=116912
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The loop in test_create_guest_memfd_invalid() that is supposed to test
that nothing is accepted as a valid flag to KVM_CREATE_GUEST_MEMFD was
initializing `flag` as 0 instead of BIT(0). This caused the loop to
immediately exit instead of iterating over BIT(0), BIT(1), ... .
Fixes: 8a89efd43423 ("KVM: selftests: Add basic selftest for guest_memfd()")
Signed-off-by: Patrick Roy <roypat@amazon.co.uk>
Reviewed-by: James Gowans <jgowans@amazon.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20241024095956.3668818-1-roypat@amazon.co.uk
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When memslot_perf_test is run nested, first iteration of test_memslot_rw_loop
testcase, sometimes takes more than 2 seconds due to build of shadow page tables.
Following iterations are fast.
To be on the safe side, bump the timeout to 10 seconds.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Link: https://lore.kernel.org/r/20241004220153.287459-1-mlevitsk@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
