summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2019-08-05selftests: netfilter: extend flowtable test script for ipsecFlorian Westphal
'flow offload' expression should not offload flows that will be subject to ipsec, but it does. This results in a connectivity blackhole for the affected flows -- first packets will go through (offload happens after established state is reached), but all remaining ones bypass ipsec encryption and are thus discarded by the peer. This can be worked around by adding "rt ipsec exists accept" before the 'flow offload' rule matches. This test case will fail, support for such flows is added in next patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-03Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: "A set of updates for perf tools and documentation: perf header: - Prevent a division by zero - Deal with an uninitialized warning proper libbpf: - Fix the missiong __WORDSIZE definition for musl & al UAPI headers: - Synchronize kernel headers Documentation: - Fix the memory units for perf.data size" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: libbpf: fix missing __WORDSIZE definition perf tools: Fix perf.data documentation units for memory size perf header: Fix use of unitialized value warning perf header: Fix divide by zero error if f_header.attr_size==0 tools headers UAPI: Sync if_link.h with the kernel tools headers UAPI: Sync sched.h with the kernel tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctl tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC() tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Update tools's copy of mman.h headers tools headers UAPI: Update tools's copy of kvm.h headers tools include UAPI: Sync x86's syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open
2019-08-03selftests: Add use case section to fcnal-testDavid Ahern
Add use case section to fcnal-test. Initial test is VRF based with a bridge and vlans. The commands stem from bug reports fixed by: a173f066c7cf ("netfilter: bridge: Don't sabotage nf_hook calls from an l3mdev") cd6428988bf4 ("netfilter: bridge: Don't sabotage nf_hook calls for an l3mdev slave") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv6 netfilter tests to fcnal-testDavid Ahern
Add IPv6 netfilter tests to send tcp reset or icmp unreachable for a port. Initial tests are VRF only. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv4 netfilter tests to fcnal-testDavid Ahern
Add netfilter tests to send tcp reset or icmp unreachable for a port. Initial tests are VRF only. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv6 runtime tests to fcnal-testDavid Ahern
Add IPv6 runtime tests where passive (no traffic flowing) and active (with traffic) sockets are expected to be reset on device deletes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv4 runtime tests to fcnal-testDavid Ahern
Add runtime tests where passive (no traffic flowing) and active (with traffic) sockets are expected to be reset on device deletes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv6 address bind tests to fcnal-testDavid Ahern
Add IPv6 address bind tests to fcnal-test.sh. Verifies socket binding to local addresses for raw, tcp and udp including device and VRF cases. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv4 address bind tests to fcnal-testDavid Ahern
Add address bind tests to fcnal-test.sh. Verifies socket binding to local addresses for raw, tcp and udp including device and VRF cases. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv6 udp tests to fcnal-testDavid Ahern
Add IPv6 udp tests to fcnal-test.sh. Covers the permutations of directly connected addresses, routed destinations, VRF and non-VRF, and expected failures for both clients and servers. Includes permutations with net.ipv4.udp_l3mdev_accept set to 0 and 1. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv4 udp tests to fcnal-testDavid Ahern
Add udp tests to fcnal-test.sh. Covers the permutations of directly connected addresses, routed destinations, VRF and non-VRF, and expected failures for both clients and servers. Includes permutations with net.ipv4.udp_l3mdev_accept set to 0 and 1. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv6 tcp tests to fcnal-testDavid Ahern
Add IPv6 tcp tests to fcnal-test.sh. Covers the permutations of directly connected addresses, routed destinations, VRF and non-VRF, and expected failures for both clients and servers. Includes permutations with net.ipv4.tcp_l3mdev_accept set to 0 and 1. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv4 tcp tests to fcnal-testDavid Ahern
Add tcp tests to fcnal-test.sh. Covers the permutations of directly connected addresses, routed destinations, VRF and non-VRF, and expected failures for both clients and servers. Includes permutations with net.ipv4.tcp_l3mdev_accept set to 0 and 1. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv6 ping tests to fcnal-testDavid Ahern
Add IPv6 ping tests to fcnal-test.sh. Covers the permutations of directly connected addresses, routed destinations, VRF and non-VRF, and expected failures. Setup includes unreachable routes and fib rules blocking traffic. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add ipv4 ping tests to fcnal-testDavid Ahern
Add ping tests to fcnal-test.sh. Covers the permutations of directly connected addresses, routed destinations, VRF and non-VRF, and expected failures. Setup includes unreachable routes and fib rules blocking traffic. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Setup for functional tests for fib and socket lookupsDavid Ahern
Initial commit for functional test suite for fib and socket lookups. This commit contains the namespace setup, networking config, test options and other basic infrastructure. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03selftests: Add nettestDavid Ahern
Add nettest - a simple program with an implementation for various networking APIs. nettest is used for tcp, udp and raw functional tests for both IPv4 and IPv6. Point of this command versus existing utilities: - controlled implementation of the APIs and the order in which they are called, - ability to verify ingress device, local and remote addresses, - timeout for controlled test length, - ability to discriminate a timeout from a system call failure, and - simplicity with test scripts. The command returns: 0 on success, 1 for any system call failure, and 2 on timeout. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03cgroup: kselftest: relax fs_spec checksChris Down
On my laptop most memcg kselftests were being skipped because it claimed cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it seems current systemd HEAD mounts it with the name "cgroup2" instead of "cgroup": % grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0 I can't think of a reason to need to check fs_spec explicitly since it's arbitrary, so we can just rely on fs_vfstype. After these changes, `make TARGETS=cgroup kselftest` actually runs the cgroup v2 tests in more cases. Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.name Signed-off-by: Chris Down <chris@chrisdown.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-02KVM: selftests: Enable dirty_log_test on s390xThomas Huth
To run the dirty_log_test on s390x, we have to make sure that we access the dirty log bitmap with little endian byte ordering and we have to properly align the memslot of the guest. Also all dirty bits of a segment are set once on s390x when one of the pages of a segment are written to for the first time, so we have to make sure that we touch all pages during the first iteration to keep the test in sync here. DEFAULT_GUEST_TEST_MEM needs an adjustment, too. On some s390x distributions, the ELF binary is linked to address 0x80000000, so we have to avoid that our test region overlaps into this area. 0xc0000000 seems to be a good alternative that should work on x86 and aarch64, too. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/r/20190731151525.17156-4-thuth@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-08-02KVM: selftests: Implement ucall() for s390xThomas Huth
On s390x, we can neither exit via PIO nor MMIO, but have to use an instruction like DIAGNOSE. Now that ucall() is implemented, we can use it in the sync_reg_test on s390x, too. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/r/20190731151525.17156-3-thuth@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-08-02KVM: selftests: Split ucall.c into architecture specific filesThomas Huth
The way we exit from a guest to userspace is very specific to the architecture: On x86, we use PIO, on aarch64 we are using MMIO and on s390x we're going to use an instruction instead. The possibility to select a type via the ucall_type_t enum is currently also completely unused, so the code in ucall.c currently looks more complex than required. Let's split this up into architecture specific ucall.c files instead, so we can get rid of the #ifdefs and the unnecessary ucall_type_t handling. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20190731151525.17156-2-thuth@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-08-01rcutorture: Test TREE03 with the threadirqs kernel boot parameterPaul E. McKenney
Since commit 05f415715ce45 ("rcu: Speed up expedited GPs when interrupting RCU reader") in v5.0 and through v5.1, booting with the threadirqs kernel boot parameter caused self-deadlocks, which can be reproduced using the following command on an 8-CPU system: tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --configs "TREE03" --bootargs "threadirqs" This commit therefore adds the threadirqs kernel boot parameter to the TREE03 rcutorture scenario in order to more quickly detect future similar bugs. Link: http://lkml.kernel.org/r/20190626135447.y24mvfuid5fifwjc@linutronix.de Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Joel Fernandes <joel@joelfernandes.org>
2019-08-01torture: Expand last_ts variable in kvm-test-1-run.shPaul E. McKenney
The kvm-test-1-run.sh script says 'test -z "last_ts"' which always evaluates to true (AKA zero) regardless of the value of the last_ts shell variable. This commit therefore inserts the needed dollar sign ("$"). Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-08-01selftests/bpf: extend sockopt_sk selftest with TCP_CONGESTION use caseStanislav Fomichev
Ignore SOL_TCP:TCP_CONGESTION in getsockopt and always override SOL_TCP:TCP_CONGESTION with "cubic" in setsockopt hook. Call setsockopt(SOL_TCP, TCP_CONGESTION) with short optval ("nv") to make sure BPF program has enough buffer space to replace it with "cubic". Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-01selftests/bpf: tests for jmp to 1st insnAlexei Starovoitov
Add 2 tests that check JIT code generation to jumps to 1st insn. 1st test is similar to syzbot reproducer. The backwards branch is never taken at runtime. 2nd test has branch to 1st insn that executes. The test is written as two bpf functions, since it's not possible to construct valid single bpf program that jumps to 1st insn. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com>
2019-08-01libbpf: set BTF FD for prog only when there is supported .BTF.ext dataAndrii Nakryiko
5d01ab7bac46 ("libbpf: fix erroneous multi-closing of BTF FD") introduced backwards-compatibility issue, manifesting itself as -E2BIG error returned on program load due to unknown non-zero btf_fd attribute value for BPF_PROG_LOAD sys_bpf() sub-command. This patch fixes bug by ensuring that we only ever associate BTF FD with program if there is a BTF.ext data that was successfully loaded into kernel, which automatically means kernel supports func_info/line_info and associated BTF FD for progs (checked and ensured also by BTF sanitization code). Fixes: 5d01ab7bac46 ("libbpf: fix erroneous multi-closing of BTF FD") Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-01tools/memory-model: Make scripts be executablePaul E. McKenney
This commit simplifies life a bit by making all of the scripts in tools/memory-model/scripts be executable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-08-01perf bench numa: Fix cpu0 bindingJiri Olsa
Michael reported an issue with perf bench numa failing with binding to cpu0 with '-0' option. # perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd # Running 'numa/mem' benchmark: # Running main, "perf bench numa numa-mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd" binding to node 0, mask: 0000000000000001 => -1 perf: bench/numa.c:356: bind_to_memnode: Assertion `!(ret)' failed. Aborted (core dumped) This happens when the cpu0 is not part of node0, which is the benchmark assumption and we can see that's not the case for some powerpc servers. Using correct node for cpu0 binding. Reported-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20190801142642.28004-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-31libbpf : make libbpf_num_possible_cpus function thread safeTakshak Chahande
Having static variable `cpus` in libbpf_num_possible_cpus function without guarding it with mutex makes this function thread-unsafe. If multiple threads accessing this function, in the current form; it leads to incrementing the static variable value `cpus` in the multiple of total available CPUs. Used local stack variable to calculate the number of possible CPUs and then updated the static variable using WRITE_ONCE(). Changes since v1: * added stack variable to calculate cpus * serialized static variable update using WRITE_ONCE() * fixed Fixes tag Fixes: 6446b3155521 ("bpf: add a new API libbpf_num_possible_cpus()") Signed-off-by: Takshak Chahande <ctakshak@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-31tc-testing: Clarify the use of tdc's -d optionLucas Bates
The -d command line argument to tdc requires the name of a physical device on the system where the tests will be run. If -d has not been used, tdc will skip tests that require a physical device. This patch is intended to better document what the -d option does and how it is used. Signed-off-by: Lucas Bates <lucasb@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31selftests/tls: fix TLS tests with CONFIG_TLS=nJakub Kicinski
Build bot reports some recent TLS tests are failing with CONFIG_TLS=n. Correct the expected return code and skip TLS installation if not supported. Tested with CONFIG_TLS=n and CONFIG_TLS=m. Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: cf32526c8842 ("selftests/tls: add a test for ULP but no keys") Fixes: 65d41fb317c6 ("selftests/tls: add a bidirectional test") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31selftests: mlxsw: Add a test for leftover DSCP rulePetr Machata
Commit dedfde2fe1c4 ("mlxsw: spectrum_dcb: Configure DSCP map as the last rule is removed") fixed a problem in mlxsw where last DSCP rule to be removed remained in effect when DSCP rewrite was applied. Add a selftest that covers this problem. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31selftests: mlxsw: Fix local variable declarations in DSCP testsPetr Machata
These two tests have some problems in the global scope pollution and on contrary, contain unnecessary local declarations. Fix them. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30tools: bpftool: add support for reporting the effective cgroup progsJakub Kicinski
Takshak said in the original submission: With different bpf attach_flags available to attach bpf programs specially with BPF_F_ALLOW_OVERRIDE and BPF_F_ALLOW_MULTI, the list of effective bpf-programs available to any sub-cgroups really needs to be available for easy debugging. Using BPF_F_QUERY_EFFECTIVE flag, one can get the list of not only attached bpf-programs to a cgroup but also the inherited ones from parent cgroup. So a new option is introduced to use BPF_F_QUERY_EFFECTIVE query flag here to list all the effective bpf-programs available for execution at a specified cgroup. Reused modified test program test_cgroup_attach from tools/testing/selftests/bpf: # ./test_cgroup_attach With old bpftool: # bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/ ID AttachType AttachFlags Name 271 egress multi pkt_cntr_1 272 egress multi pkt_cntr_2 Attached new program pkt_cntr_4 in cg2 gives following: # bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/cg2 ID AttachType AttachFlags Name 273 egress override pkt_cntr_4 And with new "effective" option it shows all effective programs for cg2: # bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/cg2 effective ID AttachType AttachFlags Name 273 egress override pkt_cntr_4 271 egress override pkt_cntr_1 272 egress override pkt_cntr_2 Compared to original submission use a local flag instead of global option. We need to clear query_flags on every command, in case batch mode wants to use varying settings. v2: (Takshak) - forbid duplicated flags; - fix cgroup path freeing. Signed-off-by: Takshak Chahande <ctakshak@fb.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Takshak Chahande <ctakshak@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30selftests/bpf: fix clearing buffered output between tests/subtestsAndrii Nakryiko
Clear buffered output once test or subtests finishes even if test was successful. Not doing this leads to accumulation of output from previous tests and on first failed tests lots of irrelevant output will be dumped, greatly confusing things. v1->v2: fix Fixes tag, add more context to patch Fixes: 3a516a0a3a7b ("selftests/bpf: add sub-tests support for test_progs") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30selftests/bpf: add test for bpf_tcp_gen_syncookiePetar Penkov
Modify the existing bpf_tcp_check_syncookie test to also generate a SYN cookie, pass the packet to the kernel, and verify that the two cookies are the same (and both valid). Since cloned SKBs are skipped during generic XDP, this test does not issue a SYN cookie when run in XDP mode. We therefore only check that a valid SYN cookie was issued at the TC hook. Additionally, verify that the MSS for that SYN cookie is within expected range. Signed-off-by: Petar Penkov <ppenkov@google.com> Reviewed-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30selftests/bpf: bpf_tcp_gen_syncookie->bpf_helpersPetar Penkov
Expose bpf_tcp_gen_syncookie to selftests. Signed-off-by: Petar Penkov <ppenkov@google.com> Reviewed-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30bpf: sync bpf.h to tools/Petar Penkov
Sync updated documentation for bpf_redirect_map. Sync the bpf_tcp_gen_syncookie helper function definition with the one in tools/uapi. Signed-off-by: Petar Penkov <ppenkov@google.com> Reviewed-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30selftests/livepatch: push and pop dynamic debug configJoe Lawrence
The livepatching self-tests tweak the dynamic debug config to verify the kernel log during the tests. Enhance set_dynamic_debug() so that the config changes are restored when the script exits. Note this functionality needs to keep in sync with: - dynamic_debug input/output formatting - functions affected by set_dynamic_debug() For example, push_dynamic_debug() transforms: kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012" to the following: file kernel/livepatch/transition.c line 530 =_ Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Tested-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-07-30kselftest: save-and-restore errno to allow for %m formattingAleksa Sarai
Previously, using "%m" in a ksft_* format string can result in strange output because the errno value wasn't saved before calling other libc functions. The solution is to simply save and restore the errno before we format the user-supplied format string. Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-07-30Merge tag 'for-linus-20190730' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd fixes from Christian Brauner: "This makes setting the exit_state in exit_notify() consistent after fixing the pidfd polling race pre-rc1. Related to the race fix, this adds a WARN_ON() to do_notify_pidfd() to catch any future exit_state races. Last, this removes an obsolete comment from the pidfd tests" * tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: exit: make setting exit_state consistent pidfd: Add warning if exit_state is 0 during notification pidfd: remove obsolete comments from test
2019-07-30Merge tag 'linux-kselftest-5.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Minor fixes to tests and one major fix to livepatch test to add skip handling to avoid false fail reports when livepatch is disabled" * tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/livepatch: add test skip handling selftests: mlxsw: Fix typo in qos_mc_aware.sh selftests/x86: fix spelling mistake "FAILT" -> "FAIL" selftests: kmod: Fix typo in kmod.sh
2019-07-29perf vendor events power9: Added missing event descriptionsMichael Petlan
Documentation source: https://wiki.raptorcs.com/w/images/6/6b/POWER9_PMU_UG_v12_28NOV2018_pub.pdf Signed-off-by: Michael Petlan <mpetlan@redhat.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Carl Love <cel@us.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Paul Clarke <pc@us.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: linuxppc-dev@ozlabs.org LPU-Reference: 20190719100837.7503-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Initial documentationJiri Olsa
Add initial drafts of documentation files, hugely unfinished. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-80-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_evsel__enable/disable testJiri Olsa
Add simple perf_evsel enable/disable test together with evsel counter reading interface. Committer testing: # make -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-evlist-a LINK test-evsel-a LINK test-cpumap-so LINK test-threadmap-so LINK test-evlist-so LINK test-evsel-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-79-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_evlist__enable/disable testJiri Olsa
Add simple perf_evlist enable/disable test together with evlist counter reading interface. Committer testing: # make -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-evlist-a LINK test-evsel-a LINK test-cpumap-so LINK test-threadmap-so LINK test-evlist-so LINK test-evsel-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-78-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_evsel testsJiri Olsa
Add 2 simple perf_evsel tests to test counters reading interface through the struct evsel object. Committer testing: # make -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-evlist-a LINK test-evsel-a LINK test-cpumap-so LINK test-threadmap-so LINK test-evlist-so LINK test-evsel-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-77-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_evlist testJiri Olsa
Add 2 simple perf_evlist tests to test counters reading interface through the struct evlist object. Committer testing: # make -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-evlist-a LINK test-cpumap-so LINK test-threadmap-so LINK test-evlist-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-76-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_thread_map testJiri Olsa
Add simple perf_thread_map tests. Committer testing: $ make O=/tmp/build/perf -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-cpumap-so LINK test-threadmap-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' $ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-75-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_cpu_map testJiri Olsa
Add simple perf_cpu_map tests. Committer testing: One has to build it in the source tree, a limitation that should be fixed in followup patches: $ make O=/tmp/build/perf -C tools/perf/lib make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK /tmp/build/perf/libperf.so.0.0.1 GEN /tmp/build/perf/libperf.pc make: Leaving directory '/home/acme/git/perf/tools/perf/lib' $ make O=/tmp/build/perf -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a gcc: error: ../libperf.a: No such file or directory make[1]: *** [Makefile:22: test-cpumap-a] Error 1 make: *** [Makefile:115: tests] Error 2 make: Leaving directory '/home/acme/git/perf/tools/perf/lib' [acme@quaco perf]$ make -C tools/perf/lib make: Entering directory '/home/acme/git/perf/tools/perf/lib' HOSTCC fixdep.o HOSTLD fixdep-in.o LINK fixdep CC core.o CC cpumap.o CC threadmap.o CC evsel.o CC evlist.o CC zalloc.o CC xyarray.o CC lib.o LD libperf-in.o AR libperf.a LINK libperf.so.0.0.1 GEN libperf.pc make: Leaving directory '/home/acme/git/perf/tools/perf/lib' $ make O=/tmp/build/perf -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-cpumap-so running static: - running test-cpumap.c...OK running dynamic: - running test-cpumap.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' $ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-74-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 09:49:35 +0000