| Age | Commit message (Collapse) | Author |
|---|
|
All of the rcuscale and refscale scenarios that mention the Kconfig option
CONFIG_RCU_FAST_NO_HZ disable it. But this Kconfig option is disabled by
default, so this commit removes the pointless "CONFIG_RCU_FAST_NO_HZ=n"
lines from these scenarios.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
With CONFIG_PREEMPT_DYNAMIC=y, the kernel builds with CONFIG_PREEMPTION=y
because preemption can be enabled at runtime. This prevents any tests
of Tiny RCU or Tiny SRCU from running correctly. This commit therefore
explicitly sets CONFIG_PREEMPT_DYNAMIC=n for those scenarios.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Alexei pointed out that we can use BPF_REG_0 which already contains imm
from move_blob2blob computation. Note that we now compare the second
insn's imm, but this should not matter, since both will be zeroed out
for the error case for the insn populated earlier.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211122235733.634914-4-memxor@gmail.com
|
|
Instead, jump directly to success case stores in case ret >= 0, else do
the default 0 value store and jump over the success case. This is better
in terms of readability. Readjust the code for kfunc relocation as well
to follow a similar pattern, also leads to easier to follow code now.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211122235733.634914-3-memxor@gmail.com
|
|
Add benchmark to measure the throughput and latency of the bpf_loop
call.
Testing this on my dev machine on 1 thread, the data is as follows:
nr_loops: 10
bpf_loop - throughput: 198.519 ± 0.155 M ops/s, latency: 5.037 ns/op
nr_loops: 100
bpf_loop - throughput: 247.448 ± 0.305 M ops/s, latency: 4.041 ns/op
nr_loops: 500
bpf_loop - throughput: 260.839 ± 0.380 M ops/s, latency: 3.834 ns/op
nr_loops: 1000
bpf_loop - throughput: 262.806 ± 0.629 M ops/s, latency: 3.805 ns/op
nr_loops: 5000
bpf_loop - throughput: 264.211 ± 1.508 M ops/s, latency: 3.785 ns/op
nr_loops: 10000
bpf_loop - throughput: 265.366 ± 3.054 M ops/s, latency: 3.768 ns/op
nr_loops: 50000
bpf_loop - throughput: 235.986 ± 20.205 M ops/s, latency: 4.238 ns/op
nr_loops: 100000
bpf_loop - throughput: 264.482 ± 0.279 M ops/s, latency: 3.781 ns/op
nr_loops: 500000
bpf_loop - throughput: 309.773 ± 87.713 M ops/s, latency: 3.228 ns/op
nr_loops: 1000000
bpf_loop - throughput: 262.818 ± 4.143 M ops/s, latency: 3.805 ns/op
>From this data, we can see that the latency per loop decreases as the
number of loops increases. On this particular machine, each loop had an
overhead of about ~4 ns, and we were able to run ~250 million loops
per second.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211130030622.4131246-5-joannekoong@fb.com
|
|
This patch tests bpf_loop in pyperf and strobemeta, and measures the
verifier performance of replacing the traditional for loop
with bpf_loop.
The results are as follows:
~strobemeta~
Baseline
verification time 6808200 usec
stack depth 496
processed 554252 insns (limit 1000000) max_states_per_insn 16
total_states 15878 peak_states 13489 mark_read 3110
#192 verif_scale_strobemeta:OK (unrolled loop)
Using bpf_loop
verification time 31589 usec
stack depth 96+400
processed 1513 insns (limit 1000000) max_states_per_insn 2
total_states 106 peak_states 106 mark_read 60
#193 verif_scale_strobemeta_bpf_loop:OK
~pyperf600~
Baseline
verification time 29702486 usec
stack depth 368
processed 626838 insns (limit 1000000) max_states_per_insn 7
total_states 30368 peak_states 30279 mark_read 748
#182 verif_scale_pyperf600:OK (unrolled loop)
Using bpf_loop
verification time 148488 usec
stack depth 320+40
processed 10518 insns (limit 1000000) max_states_per_insn 10
total_states 705 peak_states 517 mark_read 38
#183 verif_scale_pyperf600_bpf_loop:OK
Using the bpf_loop helper led to approximately a 99% decrease
in the verification time and in the number of instructions.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211130030622.4131246-4-joannekoong@fb.com
|
|
Add test for bpf_loop testing a variety of cases:
various nr_loops, null callback ctx, invalid flags, nested callbacks.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211130030622.4131246-3-joannekoong@fb.com
|
|
This patch adds the kernel-side and API changes for a new helper
function, bpf_loop:
long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx,
u64 flags);
where long (*callback_fn)(u32 index, void *ctx);
bpf_loop invokes the "callback_fn" **nr_loops** times or until the
callback_fn returns 1. The callback_fn can only return 0 or 1, and
this is enforced by the verifier. The callback_fn index is zero-indexed.
A few things to please note:
~ The "u64 flags" parameter is currently unused but is included in
case a future use case for it arises.
~ In the kernel-side implementation of bpf_loop (kernel/bpf/bpf_iter.c),
bpf_callback_t is used as the callback function cast.
~ A program can have nested bpf_loop calls but the program must
still adhere to the verifier constraint of its stack depth (the stack depth
cannot exceed MAX_BPF_STACK))
~ Recursive callback_fns do not pass the verifier, due to the call stack
for these being too deep.
~ The next patch will include the tests and benchmark
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211130030622.4131246-2-joannekoong@fb.com
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix constant sign extension affecting TCR_EL2 and preventing
running on ARMv8.7 models due to spurious bits being set
- Fix use of helpers using PSTATE early on exit by always sampling it
as soon as the exit takes place
- Move pkvm's 32bit handling into a common helper
RISC-V:
- Fix incorrect KVM_MAX_VCPUS value
- Unmap stage2 mapping when deleting/moving a memslot
x86:
- Fix and downgrade BUG_ON due to uninitialized cache
- Many APICv and MOVE_ENC_CONTEXT_FROM fixes
- Correctly emulate TLB flushes around nested vmentry/vmexit and when
the nested hypervisor uses VPID
- Prevent modifications to CPUID after the VM has run
- Other smaller bugfixes
Generic:
- Memslot handling bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
KVM: fix avic_set_running for preemptable kernels
KVM: VMX: clear vmx_x86_ops.sync_pir_to_irr if APICv is disabled
KVM: SEV: accept signals in sev_lock_two_vms
KVM: SEV: do not take kvm->lock when destroying
KVM: SEV: Prohibit migration of a VM that has mirrors
KVM: SEV: Do COPY_ENC_CONTEXT_FROM with both VMs locked
selftests: sev_migrate_tests: add tests for KVM_CAP_VM_COPY_ENC_CONTEXT_FROM
KVM: SEV: move mirror status to destination of KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
KVM: SEV: initialize regions_list of a mirror VM
KVM: SEV: cleanup locking for KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
KVM: SEV: do not use list_replace_init on an empty list
KVM: x86: Use a stable condition around all VT-d PI paths
KVM: x86: check PIR even for vCPUs with disabled APICv
KVM: VMX: prepare sync_pir_to_irr for running with APICv disabled
KVM: selftests: page_table_test: fix calculation of guest_test_phys_mem
KVM: x86/mmu: Handle "default" period when selectively waking kthread
KVM: MMU: shadow nested paging does not have PKU
KVM: x86/mmu: Remove spurious TLB flushes in TDP MMU zap collapsible path
KVM: x86/mmu: Use yield-safe TDP MMU root iter in MMU notifier unmapping
KVM: X86: Use vcpu->arch.walk_mmu for kvm_mmu_invlpg()
...
|
|
Commit 98e1385ef24b ("include/linux/radix-tree.h: replace kernel.h with
the necessary inclusions") broke the radix tree test suite in two
different ways; first by including math.h which didn't exist in the
tools directory, and second by removing an implicit include of
spinlock.h before lockdep.h. Fix both issues.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a same action when load_attr.attach_btf_id is initialized.
Signed-off-by: Mehrdad Arshad Rad <arshad.rad@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211128193337.10628-1-arshad.rad@gmail.com
|
|
Currently, we use hard code number to verify if we are in the
arp_interval timeslice. But some user may want to reduce/extend
the verify timeslice. With the similar team option 'missed_max'
the uers could change that number based on their own environment.
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VMs that mirror an encryption context rely on the owner to keep the
ASID allocated. Performing a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
would cause a dangling ASID:
1. copy context from A to B (gets ref to A)
2. move context from A to L (moves ASID from A to L)
3. close L (releases ASID from L, B still references it)
The right way to do the handoff instead is to create a fresh mirror VM
on the destination first:
1. copy context from A to B (gets ref to A)
[later] 2. close B (releases ref to A)
3. move context from A to L (moves ASID from A to L)
4. copy context from L to M
So, catch the situation by adding a count of how many VMs are
mirroring this one's encryption context.
Fixes: 0b020f5af092 ("KVM: SEV: Add support for SEV-ES intra host migration")
Message-Id: <20211123005036.2954379-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
I am putting the tests in sev_migrate_tests because the failure conditions are
very similar and some of the setup code can be reused, too.
The tests cover both successful creation of a mirror VM, and error
conditions.
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A kvm_page_table_test run with its default settings fails on VMX due to
memory region add failure:
> ==== Test Assertion Failure ====
> lib/kvm_util.c:952: ret == 0
> pid=10538 tid=10538 errno=17 - File exists
> 1 0x00000000004057d1: vm_userspace_mem_region_add at kvm_util.c:947
> 2 0x0000000000401ee9: pre_init_before_test at kvm_page_table_test.c:302
> 3 (inlined by) run_test at kvm_page_table_test.c:374
> 4 0x0000000000409754: for_each_guest_mode at guest_modes.c:53
> 5 0x0000000000401860: main at kvm_page_table_test.c:500
> 6 0x00007f82ae2d8554: ?? ??:0
> 7 0x0000000000401894: _start at ??:?
> KVM_SET_USER_MEMORY_REGION IOCTL failed,
> rc: -1 errno: 17
> slot: 1 flags: 0x0
> guest_phys_addr: 0xc0000000 size: 0x40000000
This is because the memory range that this test is trying to add
(0x0c0000000 - 0x100000000) conflicts with LAPIC mapping at 0x0fee00000.
Looking at the code it seems that guest_test_*phys*_mem variable gets
mistakenly overwritten with guest_test_*virt*_mem while trying to adjust
the former for alignment.
With the correct variable adjusted this test runs successfully.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <52e487458c3172923549bbcf9dfccfbe6faea60b.1637940473.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Each peer's endpoint contains a dst_cache entry that takes a reference
to another netdev. When the containing namespace exits, we take down the
socket and prevent future sockets from being created (by setting
creating_net to NULL), which removes that potential reference on the
netns. However, it doesn't release references to the netns that a netdev
cached in dst_cache might be taking, so the netns still might fail to
exit. Since the socket is gimped anyway, we can simply clear all the
dst_caches (by way of clearing the endpoint src), which will release all
references.
However, the current dst_cache_reset function only releases those
references lazily. But it turns out that all of our usages of
wg_socket_clear_peer_endpoint_src are called from contexts that are not
exactly high-speed or bottle-necked. For example, when there's
connection difficulty, or when userspace is reconfiguring the interface.
And in particular for this patch, when the netns is exiting. So for
those cases, it makes more sense to call dst_release immediately. For
that, we add a small helper function to dst_cache.
This patch also adds a test to netns.sh from Hangbin Liu to ensure this
doesn't regress.
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: Xiumei Mu <xmu@redhat.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Fixes: 900575aa33a3 ("wireguard: device: avoid circular netns references")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DEBUG_PI_LIST was renamed to DEBUG_PLIST since 8e18faeac3 ("lib/plist:
rename DEBUG_PI_LIST to DEBUG_PLIST").
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 8e18faeac3e4 ("lib/plist: rename DEBUG_PI_LIST to DEBUG_PLIST")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We previously removed the restriction on looping to self, and then added
a test to make sure the kernel didn't blow up during a routing loop. The
kernel didn't blow up, thankfully, but on certain architectures where
skb fragmentation is easier, such as ppc64, the skbs weren't actually
being discarded after a few rounds through. But the test wasn't catching
this. So actually test explicitly for massive increases in tx to see if
we have a routing loop. Note that the actual loop problem will need to
be addressed in a different commit.
Fixes: b673e24aad36 ("wireguard: socket: remove errant restriction on looping to self")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The selftests currently parse the kernel log at the end to track
potential memory leaks. With these tests now reading off the end of the
buffer, due to recent optimizations, some creation messages were lost,
making the tests think that there was a free without an alloc. Fix this
by increasing the kernel log size.
Fixes: 24b70eeeb4f4 ("wireguard: use synchronize_net rather than synchronize_rcu")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When compiling libbpf with gcc 4.8.5, we see:
CC staticobjs/btf_dump.o
btf_dump.c: In function ‘btf_dump_dump_type_data.isra.24’:
btf_dump.c:2296:5: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (err < 0)
^
cc1: all warnings being treated as errors
make: *** [staticobjs/btf_dump.o] Error 1
While gcc 4.8.5 is too old to build the upstream kernel, it's possible it
could be used to build standalone libbpf which suffers from the same problem.
Silence the error by initializing 'err' to 0. The warning/error seems to be
a false positive since err is set early in the function. Regardless we
shouldn't prevent libbpf from building for this.
Fixes: 920d16af9b42 ("libbpf: BTF dumper support for typed data")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1638180040-8037-1-git-send-email-alan.maguire@oracle.com
|
|
Prior patch:
]# TESTS=vlmc_filtering_test ./bridge_vlan_mcast.sh
TEST: Vlan multicast snooping enable [ OK ]
Device "bridge" does not exist.
TEST: Disable multicast vlan snooping when vlan filtering is disabled [FAIL]
Vlan filtering is disabled but multicast vlan snooping is still enabled
After patch:
# TESTS=vlmc_filtering_test ./bridge_vlan_mcast.sh
TEST: Vlan multicast snooping enable [ OK ]
TEST: Disable multicast vlan snooping when vlan filtering is disabled [ OK ]
Fixes: f5a9dd58f48b7c ("selftests: net: bridge: add test for vlan_filtering dependency")
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add testcase for BPF_MAP_TYPE_PROG_ARRAY static initialization.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211128141633.502339-3-hengqi.chen@gmail.com
|
|
Support static initialization of BPF_MAP_TYPE_PROG_ARRAY with a
syntax similar to map-in-map initialization ([0]):
SEC("socket")
int tailcall_1(void *ctx)
{
return 0;
}
struct {
__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
__uint(max_entries, 2);
__uint(key_size, sizeof(__u32));
__array(values, int (void *));
} prog_array_init SEC(".maps") = {
.values = {
[1] = (void *)&tailcall_1,
},
};
Here's the relevant part of libbpf debug log showing what's
going on with prog-array initialization:
libbpf: sec '.relsocket': collecting relocation for section(3) 'socket'
libbpf: sec '.relsocket': relo #0: insn #2 against 'prog_array_init'
libbpf: prog 'entry': found map 0 (prog_array_init, sec 4, off 0) for insn #0
libbpf: .maps relo #0: for 3 value 0 rel->r_offset 32 name 53 ('tailcall_1')
libbpf: .maps relo #0: map 'prog_array_init' slot [1] points to prog 'tailcall_1'
libbpf: map 'prog_array_init': created successfully, fd=5
libbpf: map 'prog_array_init': slot [1] set to prog 'tailcall_1' fd=6
[0] Closes: https://github.com/libbpf/libbpf/issues/354
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211128141633.502339-2-hengqi.chen@gmail.com
|
|
In BSD and abstract address cases, we store sockets in the hash table with
keys between 0 and UNIX_HASH_SIZE - 1. However, the hash saved in a socket
varies depending on its address type; sockets with BSD addresses always
have UNIX_HASH_SIZE in their unix_sk(sk)->addr->hash.
This is just for the UNIX_ABSTRACT() macro used to check the address type.
The difference of the saved hashes comes from the first byte of the address
in the first place. So, we can test it directly.
Then we can keep a real hash in each socket and replace unix_table_lock
with per-hash locks in the later patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test for dependency of mcast_vlan_snooping on vlan_filtering. If
vlan_filtering gets disabled, then mcast_vlan_snooping must be
automatically disabled as well.
TEST: Disable multicast vlan snooping when vlan filtering is disabled [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests for the new per-port/vlan mcast_router option, verify that
unknown multicast packets are flooded only to router ports.
TEST: Port vlan 10 option mcast_router default value [ OK ]
TEST: Port vlan 10 mcast_router option changed to 2 [ OK ]
TEST: Flood unknown vlan multicast packets to router port only [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests which change the new per-vlan mcast_query_interval and verify
the new value is in effect, also add a test to change
mcast_query_response_interval's value.
TEST: Vlan mcast_query_interval global option default value [ OK ]
TEST: Vlan 10 mcast_query_interval option changed to 200 [ OK ]
TEST: Vlan mcast_query_response_interval global option default value [ OK ]
TEST: Vlan 10 mcast_query_response_interval option changed to 200 [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests which change the new per-vlan mcast_querier_interval and
verify that it is taken into account when an outside querier is present.
TEST: Vlan mcast_querier_interval global option default value [ OK ]
TEST: Vlan 10 mcast_querier_interval option changed to 100 [ OK ]
TEST: Vlan 10 mcast_querier_interval expire after outside query [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test which changes the new per-vlan mcast_membership_interval and
verifies that a newly learned mdb entry would expire in that interval.
TEST: Vlan mcast_membership_interval global option default value [ OK ]
TEST: Vlan 10 mcast_membership_interval option changed to 200 [ OK ]
TEST: Vlan 10 mcast_membership_interval mdb entry expire [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests which change the new per-vlan startup query count/interval
options and verify the proper number of queries are sent in the expected
interval.
TEST: Vlan mcast_startup_query_interval global option default value [ OK ]
TEST: Vlan mcast_startup_query_count global option default value [ OK ]
TEST: Vlan 10 mcast_startup_query_interval option changed to 100 [ OK ]
TEST: Vlan 10 mcast_startup_query_count option changed to 3 [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests which verify the default values of mcast_last_member_count
mcast_last_member_count and also try to change them.
TEST: Vlan mcast_last_member_count global option default value [ OK ]
TEST: Vlan mcast_last_member_interval global option default value [ OK ]
TEST: Vlan 10 mcast_last_member_count option changed to 3 [ OK ]
TEST: Vlan 10 mcast_last_member_interval option changed to 200 [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests which change the new per-vlan IGMP/MLD versions and verify
that proper tagged general query packets are sent.
TEST: Vlan mcast_igmp_version global option default value [ OK ]
TEST: Vlan mcast_mld_version global option default value [ OK ]
TEST: Vlan 10 mcast_igmp_version option changed to 3 [ OK ]
TEST: Vlan 10 tagged IGMPv3 general query sent [ OK ]
TEST: Vlan 10 mcast_mld_version option changed to 2 [ OK ]
TEST: Vlan 10 tagged MLDv2 general query sent [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test to try the new global vlan mcast_querier control and also
verify that tagged general query packets are properly generated when
querier is enabled for a single vlan.
TEST: Vlan mcast_querier global option default value [ OK ]
TEST: Vlan 10 multicast querier enable [ OK ]
TEST: Vlan 10 tagged IGMPv2 general query sent [ OK ]
TEST: Vlan 10 tagged MLD general query sent [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the first test for bridge per-vlan multicast snooping which checks
if control of the global and per-vlan options work as expected, joins
and leaves are tested at each option value.
TEST: Vlan multicast snooping enable [ OK ]
TEST: Vlan global options existence [ OK ]
TEST: Vlan mcast_snooping global option default value [ OK ]
TEST: Vlan 10 multicast snooping control [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/ipa/ipa_main.c
8afc7e471ad3 ("net: ipa: separate disabling setup from modem stop")
76b5fbcd6b47 ("net: ipa: kill ipa_modem_init()")
Duplicated include, drop one.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the __NR_bpf definitions to fix the following build errors for mips:
$ cd tools/bpf/bpftool
$ make
[...]
bpf.c:54:4: error: #error __NR_bpf not defined. libbpf does not support your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^~~~~
bpf.c: In function ‘sys_bpf’:
bpf.c:66:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’?
return syscall(__NR_bpf, cmd, attr, size);
^~~~~~~~
__NR_brk
[...]
In file included from gen_loader.c:15:0:
skel_internal.h: In function ‘skel_sys_bpf’:
skel_internal.h:53:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’?
return syscall(__NR_bpf, cmd, attr, size);
^~~~~~~~
__NR_brk
We can see the following generated definitions:
$ grep -r "#define __NR_bpf" arch/mips
arch/mips/include/generated/uapi/asm/unistd_o32.h:#define __NR_bpf (__NR_Linux + 355)
arch/mips/include/generated/uapi/asm/unistd_n64.h:#define __NR_bpf (__NR_Linux + 315)
arch/mips/include/generated/uapi/asm/unistd_n32.h:#define __NR_bpf (__NR_Linux + 319)
The __NR_Linux is defined in arch/mips/include/uapi/asm/unistd.h:
$ grep -r "#define __NR_Linux" arch/mips
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 4000
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 5000
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 6000
That is to say, __NR_bpf is:
4000 + 355 = 4355 for mips o32,
6000 + 319 = 6319 for mips n32,
5000 + 315 = 5315 for mips n64.
So use the GCC pre-defined macro _ABIO32, _ABIN32 and _ABI64 [1] to define
the corresponding __NR_bpf.
This patch is similar with commit bad1926dd2f6 ("bpf, s390: fix build for
libbpf and selftest suite").
[1] https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/config/mips/mips.h#l549
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1637804167-8323-1-git-send-email-yangtiezhu@loongson.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter.
Current release - regressions:
- r8169: fix incorrect mac address assignment
- vlan: fix underflow for the real_dev refcnt when vlan creation
fails
- smc: avoid warning of possible recursive locking
Current release - new code bugs:
- vsock/virtio: suppress used length validation
- neigh: fix crash in v6 module initialization error path
Previous releases - regressions:
- af_unix: fix change in behavior in read after shutdown
- igb: fix netpoll exit with traffic, avoid warning
- tls: fix splice_read() when starting mid-record
- lan743x: fix deadlock in lan743x_phy_link_status_change()
- marvell: prestera: fix bridge port operation
Previous releases - always broken:
- tcp_cubic: fix spurious Hystart ACK train detections for
not-cwnd-limited flows
- nexthop: fix refcount issues when replacing IPv6 groups
- nexthop: fix null pointer dereference when IPv6 is not enabled
- phylink: force link down and retrigger resolve on interface change
- mptcp: fix delack timer length calculation and incorrect early
clearing
- ieee802154: handle iftypes as u32, prevent shift-out-of-bounds
- nfc: virtual_ncidev: change default device permissions
- netfilter: ctnetlink: fix error codes and flags used for kernel
side filtering of dumps
- netfilter: flowtable: fix IPv6 tunnel addr match
- ncsi: align payload to 32-bit to fix dropped packets
- iavf: fix deadlock and loss of config during VF interface reset
- ice: avoid bpf_prog refcount underflow
- ocelot: fix broken PTP over IP and PTP API violations
Misc:
- marvell: mvpp2: increase MTU limit when XDP enabled"
* tag 'net-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
net: dsa: microchip: implement multi-bridge support
net: mscc: ocelot: correctly report the timestamping RX filters in ethtool
net: mscc: ocelot: set up traps for PTP packets
net: ptp: add a definition for the UDP port for IEEE 1588 general messages
net: mscc: ocelot: create a function that replaces an existing VCAP filter
net: mscc: ocelot: don't downgrade timestamping RX filters in SIOCSHWTSTAMP
net: hns3: fix incorrect components info of ethtool --reset command
net: hns3: fix one incorrect value of page pool info when queried by debugfs
net: hns3: add check NULL address for page pool
net: hns3: fix VF RSS failed problem after PF enable multi-TCs
net: qed: fix the array may be out of bound
net/smc: Don't call clcsock shutdown twice when smc shutdown
net: vlan: fix underflow for the real_dev refcnt
ptp: fix filter names in the documentation
ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce()
nfc: virtual_ncidev: change default device permissions
net/sched: sch_ets: don't peek at classes beyond 'nbands'
net: stmmac: Disable Tx queues when reconfiguring the interface
selftests: tls: test for correct proto_ops
tls: fix replacing proto_ops
...
|
|
With the elevated 'KVM_CAP_MAX_VCPUS' value kvm_create_max_vcpus test
may hit RLIMIT_NOFILE limits:
# ./kvm_create_max_vcpus
KVM_CAP_MAX_VCPU_ID: 4096
KVM_CAP_MAX_VCPUS: 1024
Testing creating 1024 vCPUs, with IDs 0...1023.
/dev/kvm not available (errno: 24), skipping test
Adjust RLIMIT_NOFILE limits to make sure KVM_CAP_MAX_VCPUS fds can be
opened. Note, raising hard limit ('rlim_max') requires CAP_SYS_RESOURCE
capability which is generally not needed to run kvm selftests (but without
raising the limit the test is doomed to fail anyway).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211123135953.667434-1-vkuznets@redhat.com>
[Skip the test if the hard limit can be raised. - Paolo]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
hyperv_features's sole purpose is to test access to various Hyper-V MSRs
and hypercalls with different CPUID data. As KVM_SET_CPUID2 after KVM_RUN
is deprecated and soon-to-be forbidden, avoid it by re-creating test VM
for each sub-test.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211122175818.608220-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Ensure that the ASID are freed promptly, which becomes more important
when more tests are added to this file.
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM leaves the source VM in a dead state,
so migrating back to the original source VM fails the ioctl. Adjust
the test.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Previous patch fixes overriding callbacks incorrectly. Triggering
the crash in sendpage_locked would be more spectacular but it's
hard to get to, so take the easier path of proving this is broken
and call getname. We're currently getting IPv4 socket info on an
IPv6 socket.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests for half-received and peeked records.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure we correctly reject splicing non-data records.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test broken records.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helpers for sending and receiving special record types.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have the same code 3 times, about to add a fourth copy.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to previous patch, just copy over necessary struct into local
stack variable before checking its fields.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-14-andrii@kernel.org
|
|
Construct packet buffer explicitly for each packet to avoid unaligned
memory accesses.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-13-andrii@kernel.org
|
|
Buf can be not zero-terminated leading to strstr() to access data beyond
the intended buf[] array. Fix by forcing zero termination.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-12-andrii@kernel.org
|
