| Age | Commit message (Collapse) | Author |
|---|
|
The test checks for the following case:
state report result action
INCLUDE (A) IS_IN (B) INCLUDE (A+B) (B)=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
First we test is_include/include mode then we build on that with allow
effectively achieving:
state report result action
INCLUDE (A) ALLOW (B) INCLUDE (A+B) (B)=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helpers which will be used in subsequent tests, they are:
- check_sg_entries: check for proper source list and S,G entry
existence
- check_sg_fwding: check for proper traffic forwarding/blocking
- check_sg_state: check for proper blocked/forwarding entry state
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have to specifically check for udp protocol in addition to the mac
address because in IGMPv3 tests group-specific queries will use the same
mac address.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for one more argument which specifies the source address to
use. It will be later used for IGMPv3 S,G entry testing.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To prepare the bridge_igmp.sh for IGMPv3 we need to rename the
current test to IGMPv2.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If netfilter changes the packet mark, the packet is rerouted. The
ip_route_me_harder family of functions fails to use the right sk, opting
to instead use skb->sk, resulting in a routing loop when used with
tunnels. With the next change fixing this issue in netfilter, test for
the relevant condition inside our test suite, since wireguard was where
the bug was discovered.
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Avoid an unused variable warning.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201027233646.3434896-2-irogers@google.com
|
|
The bpf_caps array is shorter without CAP_BPF, avoid out of bounds reads
if this isn't defined. Working around this avoids -Wno-array-bounds with
clang.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201027233646.3434896-1-irogers@google.com
|
|
The kernel-doc markups there is violating the expected
syntax, causing it to not parse the name of the
markup identifier properly, preventing it to check
if the kernel-doc matches the #define below each
markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/697640045663f1366beb15e76e78b420dac5f5a2.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The check_user_mem test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 4)
Fix the test adding the correct test plan declaration.
Fixes: 4dafc08d0ba4 ("kselftest/arm64: Check mte tagged user address in kernel")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-7-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The check_ksm_options test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 4)
Fix the test adding the correct test plan declaration.
Fixes: f981d8fa2646 ("kselftest/arm64: Verify KSM page merge for MTE pages")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-6-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The check_mmap_options test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 22)
Fix the test adding the correct test plan declaration.
Fixes: 53ec81d23213 ("kselftest/arm64: Verify all different mmap MTE options")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-5-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The check_child_memory test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 12)
Fix the test adding the correct test plan declaration.
Fixes: dfe537cf4718 ("kselftest/arm64: Check forked child mte memory accessibility")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-4-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The check_tags_inclusion test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 4)
Fix the test adding the correct test plan declaration.
Fixes: f3b2a26ca78d ("kselftest/arm64: Verify mte tag inclusion via prctl")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-3-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The check_buffer_fill test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 20)
Fix the test adding the correct test plan declaration.
Fixes: e9b60476bea0 ("kselftest/arm64: Add utilities and a test to validate mte memory")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-2-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With the release of Linux 5.1 has been added a new syscall,
clock_gettime64, that provided a 64 bit time value for a specified
clock_ID to make the kernel Y2038 safe on 32 bit architectures.
Extend the vdso correctness test to cover the newly exposed vdso
function.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Move test_vdso from x86 to the vDSO test suite.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The current version of the multiarch vDSO selftest verifies only
gettimeofday.
Extend the vDSO selftest to clock_getres, to verify that the
syscall and the vDSO library function return the same information.
The extension has been used to verify the hrtimer_resoltion fix.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The current version of the multiarch vDSO selftest verifies only
gettimeofday.
Extend the vDSO selftest to the other library functions:
- time
- clock_getres
- clock_gettime
The extension has been used to verify the unified vdso library on the
supported architectures.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently the vDSO tests are built only on x86 platforms and cannot be
cross compiled.
Enable vDSO TARGET for all the platforms.
Future patches will extend the tests.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
kcmp is not used in pidfd_setns_test.c, so do not include <linux/kcmp.h>
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
kcmp syscall is used in pidfd_getfd_test.c, so add
CONFIG_CHECKPOINT_RESTORE=y to config to ensure kcmp is available.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Skip test if kcmp() is not available, for example if kernel is compiled
without CONFIG_CHECKPOINT_RESTORE=y.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There's planned tests != run tests in pidfd_test when some test is
skipped:
$ ./pidfd_test
TAP version 13
1..8
[...]
# pidfd_send_signal signal recycled pid test: Skipping test
# Planned tests != run tests (8 != 7)
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Fix by using ksft_test_result_skip():
$ ./pidfd_test
TAP version 13
1..8
[...]
ok 8 # SKIP pidfd_send_signal signal recycled pid test: Unsharing pid namespace not permitted
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:1 error:0
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP")
replaced XFAIL with SKIP in the output. Add one more space to make the
output aligned and pretty again.
Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Drop unneeded <linux/wait.h> header inclusion to fix pidfd compilation
errors seen in Fedora 32:
In file included from pidfd_open_test.c:9:
../../../../usr/include/linux/wait.h:17:16: error: expected identifier before numeric constant
17 | #define P_ALL 0
| ^
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 1056d3d2c97e ("selftests: enforce local header dependency in
lib.mk") added header dependency to the rule, but as the rule uses $^,
the headers are added to the compiler command line.
This can cause unexpected precompiled header files being generated when
compilation fails:
$ echo { >> openat2_test.c
$ make
gcc -Wall -O2 -g -fsanitize=address -fsanitize=undefined openat2_test.c
tools/testing/selftests/kselftest_harness.h tools/testing/selftests/kselftest.h helpers.c
-o tools/testing/selftests/openat2/openat2_test
openat2_test.c:313:1: error: expected identifier or ‘(’ before ‘{’ token
313 | {
| ^
make: *** [../lib.mk:140: tools/testing/selftests/openat2/openat2_test] Error 1
$ file openat2_test*
openat2_test: GCC precompiled header (version 014) for C
openat2_test.c: C source, ASCII text
Fix it by filtering out the headers, so that we'll only pass the actual
*.c files in the compiler command line.
Fixes: 1056d3d2c97e ("selftests: enforce local header dependency in lib.mk")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
More recent libc implementations are now using openat/openat2 system
calls so also add do_sys_openat2 to the tracing so that the test
passes on these systems because do_sys_open may not be called.
Thanks to Masami Hiramatsu for the help on getting this fix to work
correctly.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit cad6967ac108 ("fork: introduce kernel_clone()") replaced "_do_fork()"
with "kernel_clone()". The ftrace selftests reference the fork function in
several of the tests. The rename will make the tests break, but if those
names are changed in the tests, they would then break on older kernels. The
same set of tests should pass older kernels if they have previously passed.
Obviously, a new test may not work on older kernels if the test was added
due to a bug or a new feature.
The setup of ftracetest will now create a $FUNCTION_FORK bash variable
that will contain "_do_fork" for older kernels and "kernel_clone" for newer
ones. It figures out the proper name by examining /proc/kallsyms.
Note, available_filter_functions could also be used, but because some tests
should be able to pass without function tracing enabled, it could not be
used.
Fixes: eea11285dab3 ("tracing: switch to kernel_clone()")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This commit moves the descriptions of the files residing in
tools/memory-model/Documentation to a README file in that directory,
leaving behind the description of tools/memory-model/Documentation/README
itself. After this change, tools/memory-model/Documentation/README
provides a guide to the files in the tools/memory-model/Documentation
directory, guiding people with different skills and needs to the most
appropriate starting point.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add a small section to the litmus-tests.txt documentation file for
the Linux Kernel Memory Model explaining that the memory model often
fails to recognize certain control dependencies.
Suggested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When a user tries to modify cpuidle or cpufreq properties on offline
CPUs, the tool returns success (exit status 0) but also does not provide
any warning message regarding offline cpus that may have been specified
but left unchanged. In case of all or a few CPUs being offline, it can be
difficult to keep track of which CPUs didn't get the new frequency or idle
state set. Silent failures are difficult to keep track of when there are a
huge number of CPUs on which the action is performed.
This patch adds helper functions to find both online and offline CPUs and
print them out accordingly.
We use these helper functions in cpuidle-set and cpufreq-set to print an
additional message if the user attempts to modify offline cpus.
Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Some tests logs for kunit_tool tests are missing their test plans
causing their tests to fail; fix this by adding the test plans.
Fixes: 45dcbb6f5ef7 ("kunit: test: add test plan to KUnit TAP format")
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Empty test suite is okay test suite.
Don't fail the rest of the test suites if one of them is empty.
Fixes: 6ebf5866f2e8 ("kunit: tool: add Python wrappers for running KUnit tests")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Due to the raw_output() function on kunit_parser.py actually being a
generator, it only runs if something reads the lines it returns. Since
we no-longer do that (parsing doesn't actually happen if raw_output is
enabled), it was not printing anything.
Fixes: 45ba7a893ad8 ("kunit: kunit_tool: Separate out config/build/exec/parse")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The COPY_MC_TEST facility has served its purpose for validating the
early termination conditions of the copy_mc_fragile() implementation.
Remove it and the EXPORT_SYMBOL_GPL of copy_mc_fragile().
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/160316688322.3374697.8648308115165836243.stgit@dwillia2-desk3.amr.corp.intel.com
|
|
Instead of hard-coding invalid pids_cgrp_id, use Kconfig to detect the
presence of that enum value and CO-RE to capture its actual value in the
hosts's kernel.
Fixes: 03d4d13fab3f ("selftests/bpf: Add profiler test")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201022202739.3667367-1-andrii@kernel.org
|
|
The ION android code has long been marked to be removed, now that we
dma-buf support merged into the real part of the kernel.
It was thought that we could wait to remove the ion kernel at a later
time, but as the out-of-tree Android fork of the ion code has diverged
quite a bit, and any Android device using the ion interface uses that
forked version and not this in-tree version, the in-tree copy of the
code is abandonded and not used by anyone.
Combine this abandoned codebase with the need to make changes to it in
order to keep the kernel building properly, which then causes merge
issues when merging those changes into the out-of-tree Android code, and
you end up with two different groups of people (the in-kernel-tree
developers, and the Android kernel developers) who are both annoyed at
the current situation. Because of this problem, just drop the in-kernel
copy of the ion code now, as it's not used, and is only causing problems
for everyone involved.
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Laura Abbott <laura@labbott.name>
Cc: Martijn Coenen <maco@android.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Todd Kjos <tkjos@android.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200827123627.538189-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A time namespace fix and a matching selftest. The futex absolute
timeouts which are based on CLOCK_MONOTONIC require time namespace
corrected. This was missed in the original time namesapce support"
* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/timens: Add a test for futex()
futex: Adjust absolute futex timeouts with per time namespace offset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place (the largest group here is
Christoph's stat cleanups)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove KSTAT_QUERY_FLAGS
fs: remove vfs_stat_set_lookup_flags
fs: move vfs_fstatat out of line
fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat
fs: remove vfs_statx_fd
fs: omfs: use kmemdup() rather than kmalloc+memcpy
[PATCH] reduce boilerplate in fsid handling
fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS
selftests: mount: add nosymfollow tests
Add a "nosymfollow" mount option.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the
emulation of VSX loads. The affected CPUs were not widely available.
- Two fixes for machine check handling in guests under PowerVM.
- A fix for our recent changes to SMP setup, when
CONFIG_CPUMASK_OFFSTACK=y.
- Three fixes for races in the handling of some of our powernv sysfs
attributes.
- One change to remove TM from the set of Power10 CPU features.
- A couple of other minor fixes.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan
Niethe, Mahesh Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai,
Srikar Dronamraju, Vasant Hegde.
* tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Avoid using addr_to_pfn in real mode
powerpc/uaccess: Don't use "m<>" constraint with GCC 4.9
powerpc/eeh: Fix eeh_dev_check_failure() for PE#0
powerpc/64s: Remove TM from Power10 features
selftests/powerpc: Make alignment handler test P9N DD2.1 vector CI load workaround
powerpc: Fix undetected data corruption with P9N DD2.1 VSX CI load emulation
powerpc/powernv/dump: Handle multiple writes to ack attribute
powerpc/powernv/dump: Fix race while processing OPAL dump
powerpc/smp: Use GFP_ATOMIC while allocating tmp mask
powerpc/smp: Remove unnecessary variable
powerpc/mce: Avoid nmi_enter/exit in real mode on pseries hash
powerpc/opal_elog: Handle multiple writes to ack attribute
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"First of all, the adaptive voltage scaling (AVS) drivers go to new
platform-specific locations as planned (this part was reported to have
merge conflicts against the new arm-soc updates in linux-next).
In addition to that, there are some fixes (intel_idle, intel_pstate,
RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state
accounting support to the generic power domains (genpd) code and some
janitorial changes all over.
Specifics:
- Move the AVS drivers to new platform-specific locations and get rid
of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra)"
* tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM: sleep: remove unreachable break
PM: AVS: Drop the avs directory and the corresponding Kconfig
PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
PM: domains: Fix build error for genpd notifiers
powercap: Fix typo in Kconfig "Plance" -> "Plane"
cpufreq: schedutil: restore cached freq when next_f is not changed
acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
PM: AVS: smartreflex Move driver to soc specific drivers
PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
PM: domains: enable domain idle state accounting
PM: domains: Add curly braces to delimit comment + statement block
PM: domains: Add support for PM domain on/off notifiers for genpd
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
intel_idle: Ignore _CST if control cannot be taken from the platform
cpuidle: Remove pointless stub
intel_idle: mention assumption that WBINVD is not needed
MAINTAINERS: Add section for cpuidle-psci PM domain
cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
...
|
|
turbostat tends to get confused when CPUs are added and removed
while it is running.
There are races, such as checking the current cpu, and then
reading a sysfs file that depends on that cpu number.
Close the two issues that seem to come up the most.
First, there is an infinite reset loop detector --
change that to allow more resets before giving up.
Secondly, one of those file reads didn't really need
to exit the program on failure...
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
cpu1: MSR_IA32_TEMPERATURE_TARGET: 0x05640000 (95 C) (100 default - 5 offset)
Account for the new "offset" field in MSR_TEMPERATURE_TARGET.
While this field is usually zero, ignoring it results in over-stating
the current temperature, both per-core and per-package.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystem
Current release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
|
|
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
|
|
* pm-core:
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
* pm-sleep:
PM: sleep: remove unreachable break
* pm-tools:
cpupower: speed up generating git version string
cpupowerutils: fix spelling mistake "dependant" -> "dependent"
* powercap:
powercap: Fix typo in Kconfig "Plance" -> "Plane"
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
|
