| Age | Commit message (Collapse) | Author |
|---|
|
Check that verifier rejects BPF program containing relocation
pointing to non-existent BTF type.
To force relocation resolution on kernel side test case uses
bpf_attr->core_relos field. This field is not exposed by libbpf,
so directly do BPF system call in the test.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A few tests check if nettest exists in the $PATH before adding
$PWD to $PATH and re-checking. They don't discard stderr on
the first check (and nettest is built as part of selftests,
so it's pretty normal for it to not be available in system $PATH).
This leads to output noise:
which: no nettest in (/home/virtme/tools/fs/bin:/home/virtme/tools/fs/sbin:/home/virtme/tools/fs/usr/bin:/home/virtme/tools/fs/usr/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
Add a common helper for the check which does silence stderr.
There is another small functional change hiding here, because pmtu.sh
and fib_rule_tests.sh used to return from the test case rather than
completely exit. Building nettest is not hard, there should be no need
to maintain the ability to selectively skip cases in its absence.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240821012227.1398769-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
At some point there'd been a dumb braino during the dup_fd()
calling conventions change; caught by smatch and immediately fixed.
The trouble is, there had been no test coverage for the dup_fd() failure
handling - neither in kselftests nor in LTP. Fortunately, it can be
triggered on stock kernel - ENOMEM would require fault injection, but
EMFILE can be had with sysctl alone (fs.nr_open).
Add a test for dup_fd() failure.
Fixed up commit log and short log - Shuah Khan
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Smatch reported a possible off-by-one in tcp_validate_cookie().
However, it's false positive because the possible range of mssind is
limited from 0 to 3 by the preceding calculation.
mssind = (cookie & (3 << 6)) >> 6;
Now, the verifier does not complain without the boundary check.
Let's remove the checks.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/6ae12487-d3f1-488b-9514-af0dac96608f@stanley.mountain/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240821013425.49316-1-kuniyu@amazon.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Currently the parsing code generator assumes that the yaml
specification file name and the main 'name' attribute carried
inside correspond, that is the field is the c-name representation
of the file basename.
The above assumption held true within the current tree, but will be
hopefully broken soon by the upcoming net shaper specification.
Additionally, it makes the field 'name' itself useless.
Lift the assumption, always computing the generated include file
name from the generated c file name.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/24da5a3596d814beeb12bd7139a6b4f89756cc19.1724165948.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Source the ethtool library from the correct path and avoid the following
error:
./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory
Fixes: 40d269c000bd ("selftests: forwarding: Move several selftests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2112faff02e536e1ac14beb4c2be09c9574b90ae.1724150067.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both __xlated and __jited work with disassembly.
It is logical to have both work in a similar manner.
This commit updates __xlated macro handling in test_loader.c by making
it expect matches on sequential lines, same way as __jited operates.
For example:
__xlated("1: *(u64 *)(r10 -16) = r1") ;; matched on line N
__xlated("3: r0 = &(void __percpu *)(r0)") ;; matched on line N+1
Also:
__xlated("1: *(u64 *)(r10 -16) = r1") ;; matched on line N
__xlated("...") ;; not matched
__xlated("3: r0 = &(void __percpu *)(r0)") ;; mantched on any
;; line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A program calling sub-program which does a tail call.
The idea is to verify instructions generated by jit for tail calls:
- in program and sub-program prologues;
- for subprogram call instruction;
- for tail call itself.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allow to verify jit behaviour by writing tests as below:
SEC("tp")
__arch_x86_64
__jited(" endbr64")
__jited(" nopl (%rax,%rax)")
__jited(" xorq %rax, %rax")
...
__naked void some_test(void)
{
asm volatile (... ::: __clobber_all);
}
Allow regular expressions in patterns, same way as in __msg.
By default assume that each __jited pattern has to be matched on the
next consecutive line of the disassembly, e.g.:
__jited(" endbr64") # matched on line N
__jited(" nopl (%rax,%rax)") # matched on line N+1
If match occurs on a wrong line an error is reported.
To override this behaviour use __jited("..."), e.g.:
__jited(" endbr64") # matched on line N
__jited("...") # not matched
__jited(" nopl (%rax,%rax)") # matched on any line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit adds a utility function to get disassembled text for jited
representation of a BPF program designated by file descriptor.
Function prototype looks as follows:
int get_jited_program_text(int fd, char *text, size_t text_sz)
Where 'fd' is a file descriptor for the program, 'text' and 'text_sz'
refer to a destination buffer for disassembled text.
Output format looks as follows:
18: 77 06 ja L0
1a: 50 pushq %rax
1b: 48 89 e0 movq %rsp, %rax
1e: eb 01 jmp L1
20: 50 L0: pushq %rax
21: 50 L1: pushq %rax
^ ^^^^^^^^ ^ ^^^^^^^^^^^^^^^^^^
| binary insn | textual insn
| representation | representation
| |
instruction offset inferred local label name
The code and makefile changes are inspired by jit_disasm.c from bpftool.
Use llvm libraries to disassemble BPF program instead of libbfd to avoid
issues with disassembly output stability pointed out in [1].
Selftests makefile uses Makefile.feature to detect if LLVM libraries
are available. If that is not the case selftests build proceeds but
the function returns -EOPNOTSUPP at runtime.
[1] commit eb9d1acf634b ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Upcoming changes require a notation to specify regular expression
matches for regular verifier log messages, disassembly of BPF
instructions, disassembly of jited instructions.
Neither basic nor extended POSIX regular expressions w/o additional
escaping are good for this role because of wide use of special
characters in disassembly, for example:
movq -0x10(%rbp), %rax ;; () are special characters
cmpq $0x21, %rax ;; $ is a special character
*(u64 *)(r10 -16) = r1 ;; * and () are special characters
This commit borrows syntax from LLVM's FileCheck utility.
It replaces __regex macro with ability to embed regular expressions
in __msg patters using "{{" "}}" pairs for escaping.
Syntax for __msg patterns:
pattern := (<verbatim text> | regex)*
regex := "{{" <posix extended regular expression> "}}"
For example, pattern "foo{{[0-9]+}}" matches strings like
"foo0", "foo007", etc.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
__msg, __regex and __xlated tags are based on
__attribute__((btf_decl_tag("..."))) annotations.
Clang de-duplicates such annotations, e.g. the following
two sequences of tags are identical in final BTF:
/* seq A */ /* seq B */
__tag("foo") __tag("foo")
__tag("bar") __tag("bar")
__tag("foo")
Fix this by adding a unique suffix for each tag using __COUNTER__
pre-processor macro. E.g. here is a new definition for __msg:
#define __msg(msg) \
__attribute__((btf_decl_tag("comment:test_expect_msg=" XSTR(__COUNTER__) "=" msg)))
Using this definition the "seq A" from example above is translated to
BTF as follows:
[..] DECL_TAG 'comment:test_expect_msg=0=foo' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=1=bar' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=2=foo' type_id=X component_idx=-1
Surprisingly, this bug affects a single existing test:
verifier_spill_fill/old_stack_misc_vs_cur_ctx_ptr,
where sequence of identical messages was expected in the log.
Fixes: 537c3f66eac1 ("selftests/bpf: add generic BPF program tester-loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Suppose log="foo bar buz" and msg->substr="bar".
In such case current match processing logic would update 'log' as
follows: log += strlen(msg->substr); -> log += 3 -> log=" bar".
However, the intent behind the 'log' update is to make it point after
the successful match, e.g. to make log=" buz" in the example above.
Fixes: 4ef5d6af4935 ("selftests/bpf: no need to track next_match_pos in struct test_loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When running test_loader based tests in the verbose mode each matched
message leaves a trace in the stderr, e.g.:
./test_progs -vvv -t ...
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
This is not very helpful when debugging such tests and clobbers the
log a lot.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Define BPF iterator "getter" kfunc, which accepts iterator pointer as
one of the arguments. Make sure that argument passed doesn't have to be
the very first argument (unlike new-next-destroy combo).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Sometimes it's useful to organize member fields in cache-line boundary.
The 'typecln' sort key is short for type-cacheline and to show samples
in each cacheline. The cacheline size is fixed to 64 for now, but it
can read the actual size once it saves the value from sysfs.
For example, you maybe want to which cacheline in a target is hot or
cold. The following shows members in the cfs_rq's first cache line.
$ perf report -s type,typecln,typeoff -H
...
- 2.67% struct cfs_rq
+ 1.23% struct cfs_rq: cache-line 2
+ 0.57% struct cfs_rq: cache-line 4
+ 0.46% struct cfs_rq: cache-line 6
- 0.41% struct cfs_rq: cache-line 0
0.39% struct cfs_rq +0x14 (h_nr_running)
0.02% struct cfs_rq +0x38 (tasks_timeline.rb_leftmost)
...
Committer testing:
# root@number:~# perf report -s type,typecln,typeoff -H --stdio
# Total Lost Samples: 0
#
# Samples: 5K of event 'cpu_atom/mem-loads,ldlat=5/P'
# Event count (approx.): 312251
#
# Overhead Data Type / Data Type Cacheline / Data Type Offset
# .............. ..................................................
#
<SNIP>
0.07% struct sigaction
0.05% struct sigaction: cache-line 1
0.02% struct sigaction +0x58 (sa_mask)
0.02% struct sigaction +0x78 (sa_mask)
0.03% struct sigaction: cache-line 0
0.02% struct sigaction +0x38 (sa_mask)
0.01% struct sigaction +0x8 (sa_mask)
<SNIP>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819233603.54941-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It'd be better to have them in hex to check cacheline alignment.
Percent offset size field
100.00 0 0x1c0 struct cfs_rq {
0.00 0 0x10 struct load_weight load {
0.00 0 0x8 long unsigned int weight;
0.00 0x8 0x4 u32 inv_weight;
};
0.00 0x10 0x4 unsigned int nr_running;
14.56 0x14 0x4 unsigned int h_nr_running;
0.00 0x18 0x4 unsigned int idle_nr_running;
0.00 0x1c 0x4 unsigned int idle_h_nr_running;
...
Committer notes:
Justification from Namhyung when asked about why it would be "better":
Cache line sizes are power of 2 so it'd be natural to use hex and
check whether an offset is in the same boundary. Also 'perf annotate'
shows instruction offsets in hex.
>
> Maybe this should be selectable?
I can add an option and/or a config if you want.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819233603.54941-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The check that map is NULL is already done in the bpf_map__fd(map) and
returns an errno, which does not run further checks.
In addition, even if the check for map is run, the return is a pointer,
which is not consistent with the err_number returned by bpf_map__fd(map).
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: opensource.kernel@vivo.com
Link: https://lore.kernel.org/r/20240821101500.4568-1-11162571@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In check_matching_type(), it checks the type state of the register in a
wrong order. When it's the percpu pointer, it should check the type for
the pointer, but it checks the CFA bit first and thought it has no type
in the stack slot. This resulted in no type info.
-----------------------------------------------------------
find data type for 0x28(reg1) at hrtimer_reprogram+0x88
CU for kernel/time/hrtimer.c (die:0x18f219f)
frame base: cfa=1 fbreg=7
...
add [72] percpu 0x24500 -> reg1 pointer type='struct hrtimer_cpu_base' size=0x240 (die:0x18f6d46)
bb: [7a - 7e]
bb: [80 - 86] (here)
bb: [88 - 88] vvv
chk [88] reg1 offset=0x28 ok=1 kind=4 cfa : no type information
no type information
Here, instruction at 0x72 found reg1 has a (percpu) pointer and got the
correct type. But when it checks the final result, it wrongly thought
it was stack variable because it checks the cfa bit first.
After changing the order of state check:
-----------------------------------------------------------
find data type for 0x28(reg1) at hrtimer_reprogram+0x88
CU for kernel/time/hrtimer.c (die:0x18f219f)
frame base: cfa=1 fbreg=7
... (here)
vvvvvvvvvv
chk [88] reg1 offset=0x28 ok=1 kind=4 percpu ptr : Good!
found by insn track: 0x28(reg1) type-offset=0x28
final type: type='struct hrtimer_cpu_base' size=0x240 (die:0x18f6d46)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821065408.285548-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sometimes a compound type can have a single field and the size is the
same as the base type. But it's still preferred as struct or union
could carry more information than the base type.
Also put a slight priority on the typedef for the same reason.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821065408.285548-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I found it missed to copy the immediate constant when it moves the
register value. This could result in a wrong type inference since the
address for the per-cpu variable would be 0 always.
Fixes: eb9190afaed6afd5 ("perf annotate-data: Handle ADD instructions")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821065408.285548-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The function "scheduler_tick" was renamed to "sched_tick" and a selftest
that used that function for testing function trace filtering used that
function as part of the test.
But the change causes it to fail when run on older kernels. As tests
should not fail on older kernels, add a check to see which name is
available before testing.
Fixes: 86dd6c04ef9f ("sched/balancing: Rename scheduler_tick() => sched_tick()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Make timespec pointers, pointers to const in checklist function. As a
consequence, make list parameter in checklist function pointer to const
as well. Const-correctness increases readability.
Improvement was found by running cppcheck tool on the patched file as
follows:
```
cppcheck --enable=all \
tools/testing/selftests/timers/threadtest.c \
--suppress=missingIncludeSystem \
--suppress=unusedFunction
```
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This case was not covered, and the wrong ID was set before the previous
commit.
The rest is not modified, it is just that it will increase the code
coverage.
The right address ID can be verified by looking at the packet traces. We
could automate that using Netfilter with some cBPF code for example, but
that's always a bit cryptic. Packetdrill seems better fitted for that.
Fixes: 4f49d63352da ("selftests: mptcp: add fullmesh testcases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-13-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After having flushed endpoints that didn't cause the creation of new
subflows, it is important to check endpoints can be re-created, re-using
previously used IDs.
Before the previous commit, the client would not have been able to
re-create the subflow that was previously rejected.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 06faa2271034 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-6-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test extends "delete and re-add" to validate the previous commit. A
new 'subflow' endpoint is added, but the subflow request will be
rejected. The result is that no subflow will be established from this
address.
Later, the endpoint is removed and re-added after having cleared the
firewall rule. Before the previous commit, the client would not have
been able to create this new subflow.
While at it, extra checks have been added to validate the expected
numbers of MPJ and RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-4-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test extends "delete re-add signal" to validate the previous
commit. An extra address is announced by the server, but this address
cannot be used by the client. The result is that no subflow will be
established to this address.
Later, the server will delete this extra endpoint, and set a new one,
with a valid address, but re-using the same ID. Before the previous
commit, the server would not have been able to announce this new
address.
While at it, extra checks have been added to validate the expected
numbers of MPJ, ADD_ADDR and RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-2-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Looking at timestamped output of netdev CI reveals that
most of the time in forwarding tests for custom route
hashing is spent on a single case, namely the test which
uses ping (mausezahn does not support flow labels).
On a non-debug kernel we spend 714 of 730 total test
runtime (97%) on this test case. While having flow label
support in a traffic gen tool / mausezahn would be best,
we can significantly speed up the loop by putting ip vrf exec
outside of the iteration.
In a test of 1000 pings using a normal loop takes 50 seconds
to finish. While using:
ip vrf exec $vrf sh -c "$loop-body"
takes 12 seconds (1/4 of the time).
Some of the slowness is likely due to our inefficient virtualization
setup, but even on my laptop running "ip link help" 16k times takes
25-30 seconds, so I think it's worth optimizing even for fastest
setups.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240817203659.712085-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove dependence on libcap. libcap is only used to query whether a
capability is supported, which is just 1 capget system call.
If the capget system call fails, fall back on root permission
checking. Previously if libcap fails then the permission is assumed
not present which may be pessimistic/wrong.
Add a used_root out argument to perf_cap__capable to say whether the
fall back root check was used. This allows the correct error message,
"root" vs "users with the CAP_PERFMON or CAP_SYS_ADMIN capability", to
be selected.
Tidy uses of perf_cap__capable so that tests aren't repeated if capget
isn't supported.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240806220614.831914-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The bitfield members might not have DW_AT_data_member_location. Let's
use DW_AT_data_bit_offset to set the member offset correct. Also use
DW_AT_bit_size for the name like in a C program.
Before:
Annotate type: 'struct sk_buff' (1 samples)
Percent Offset Size Field
- 100.00 0 232 struct sk_buff {
+ 0.00 0 24 union ;
+ 0.00 24 8 union ;
+ 0.00 32 8 union ;
0.00 40 48 char[] cb;
+ 0.00 88 16 union ;
0.00 104 8 long unsigned int _nfct;
100.00 112 4 unsigned int len;
0.00 116 4 unsigned int data_len;
0.00 120 2 __u16 mac_len;
0.00 122 2 __u16 hdr_len;
0.00 124 2 __u16 queue_mapping;
0.00 126 0 __u8[] __cloned_offset;
0.00 0 1 __u8 cloned;
0.00 0 1 __u8 nohdr;
0.00 0 1 __u8 fclone;
0.00 0 1 __u8 peeked;
0.00 0 1 __u8 head_frag;
0.00 0 1 __u8 pfmemalloc;
0.00 0 1 __u8 pp_recycle;
0.00 127 1 __u8 active_extensions;
+ 0.00 128 60 union ;
0.00 188 4 sk_buff_data_t tail;
0.00 192 4 sk_buff_data_t end;
0.00 200 8 unsigned char* head;
After:
Annotate type: 'struct sk_buff' (1 samples)
Percent Offset Size Field
- 100.00 0 232 struct sk_buff {
+ 0.00 0 24 union ;
+ 0.00 24 8 union ;
+ 0.00 32 8 union ;
0.00 40 48 char[] cb
+ 0.00 88 16 union ;
0.00 104 8 long unsigned int _nfct;
100.00 112 4 unsigned int len;
0.00 116 4 unsigned int data_len;
0.00 120 2 __u16 mac_len;
0.00 122 2 __u16 hdr_len;
0.00 124 2 __u16 queue_mapping;
0.00 126 0 __u8[] __cloned_offset;
0.00 126 1 __u8 cloned:1;
0.00 126 1 __u8 nohdr:1;
0.00 126 1 __u8 fclone:2;
0.00 126 1 __u8 peeked:1;
0.00 126 1 __u8 head_frag:1;
0.00 126 1 __u8 pfmemalloc:1;
0.00 126 1 __u8 pp_recycle:1;
0.00 127 1 __u8 active_extensions;
+ 0.00 128 60 union ;
0.00 188 4 sk_buff_data_t tail;
0.00 192 4 sk_buff_data_t end;
0.00 200 8 unsigned char* head;
Commiter notes:
Collect some data:
root@number:~# perf mem record -a --ldlat 5 -- ping -s 8193 -f 192.168.86.1
Memory events are enabled on a subset of CPUs: 16-27
PING 192.168.86.1 (192.168.86.1) 8193(8221) bytes of data.
.^C
--- 192.168.86.1 ping statistics ---
13881 packets transmitted, 13880 received, 0.00720409% packet loss, time 8664ms
rtt min/avg/max/mdev = 0.510/0.599/7.768/0.115 ms, ipg/ewma 0.624/0.593 ms
[ perf record: Woken up 8 times to write data ]
[ perf record: Captured and wrote 14.877 MB perf.data (46785 samples) ]
root@number:~#
root@number:~# perf evlist
cpu_atom/mem-loads,ldlat=5/P
cpu_atom/mem-stores/P
dummy:u
root@number:~# perf evlist -v
cpu_atom/mem-loads,ldlat=5/P: type: 10 (cpu_atom), size: 136, config: 0x5d0 (mem-loads), { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT_STRUCT, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1, { bp_addr, config1 }: 0x7
cpu_atom/mem-stores/P: type: 10 (cpu_atom), size: 136, config: 0x6d0 (mem-stores), { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT_STRUCT, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1
dummy:u: type: 1 (software), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ADDR|CPU|IDENTIFIER|DATA_SRC|WEIGHT_STRUCT, read_format: ID|LOST, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
root@number:~#
Ok, now lets see what changes from before this patch to after it:
root@number:~# perf annotate --data-type > /tmp/before
Apply the patch, build:
root@number:~# perf annotate --data-type > /tmp/after
The first hunk of the diff, for a glib data structure, in userspace,
look at those bitfields:
root@number:~# diff -u10 /tmp/before /tmp/after | head -20
--- /tmp/before 2024-08-20 17:29:58.306765780 -0300
+++ /tmp/after 2024-08-20 17:33:13.210582596 -0300
@@ -163,22 +163,22 @@
Annotate type: 'GHashTable' in /usr/lib64/libglib-2.0.so.0.8000.3 (1 samples):
============================================================================
Percent offset size field
100.00 0 96 GHashTable {
0.00 0 8 gsize size;
0.00 8 4 gint mod;
100.00 12 4 guint mask;
0.00 16 4 guint nnodes;
0.00 20 4 guint noccupied;
- 0.00 0 4 guint have_big_keys;
- 0.00 0 4 guint have_big_values;
+ 0.00 24 1 guint have_big_keys:1;
+ 0.00 24 1 guint have_big_values:1;
0.00 32 8 gpointer keys;
0.00 40 8 guint* hashes;
0.00 48 8 gpointer values;
root@number:~#
As advertised :-)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240815223823.2402285-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
"Check for RCH dport before accessing pci_host_bridge and a fix to
address a KASAN warning for the cxl regression test suite cxl-test"
* tag 'cxl-fixes-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/test: Skip cxl_setup_parent_dport() for emulated dports
cxl/pci: Get AER capability address from RCRB only for RCH dport
|
|
Integrity Policy Enforcement (IPE) is an LSM that provides an
complimentary approach to Mandatory Access Control than existing LSMs
today.
Existing LSMs have centered around the concept of access to a resource
should be controlled by the current user's credentials. IPE's approach,
is that access to a resource should be controlled by the system's trust
of a current resource.
The basis of this approach is defining a global policy to specify which
resource can be trusted.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The previous attempt fixed the build on debian:experimental-x-mipsel,
but when building on a larger set of containers I noticed it broke the
build on some other 32-bit architectures such as:
42 7.87 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)
builtin-daemon.c: In function 'cmd_session_list':
builtin-daemon.c:692:16: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Werror=format=]
fprintf(out, "%c%" PRIu64,
^~~~~
builtin-daemon.c:694:13:
csv_sep, (curr - daemon->start) / 60);
~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from builtin-daemon.c:3:0:
/usr/arm-linux-gnueabihf/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
So lets cast that time_t (32-bit/64-bit) to uint64_t to make sure it
builds everywhere.
Fixes: 4bbe6002931954bb ("perf daemon: Fix the build on 32-bit architectures")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZsPmldtJ0D9Cua9_@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rewrite function to have (unneeded) socket descriptors automatically
close()d when leaving the scope. Make sure the "ownership" of fds is
correctly passed via take_fd(); i.e. descriptor returned to caller will
remain valid.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-6-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Constants got switched reducing the test's coverage. Replace SOCK_DGRAM
with SOCK_STREAM in one of unix_inet_skb_redir_to_connected() tests.
Fixes: 51354f700d40 ("bpf, sockmap: Add af_unix test with both sockets in map")
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-5-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Do actually test the sotype as specified by the caller.
This picks up after commit 75e0e27db6cf ("selftest/bpf: Change udp to inet
in some function names").
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-4-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Replace implementation with a call to a generic function.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-3-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Following create_pair() changes, remove unused function argument in
create_socket_pairs() and adapt its callers, i.e. drop the open-coded
loopback socket creation.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-2-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Extend the function to allow creating socket pairs of SOCK_STREAM,
SOCK_DGRAM and SOCK_SEQPACKET.
Adapt direct callers and leave further cleanups for the following patch.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-1-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
GCC errors when compiling tailcall_bpf2bpf_hierarchy2.c and
tailcall_bpf2bpf_hierarchy3.c with the following error:
progs/tailcall_bpf2bpf_hierarchy2.c: In function 'tailcall_bpf2bpf_hierarchy_2':
progs/tailcall_bpf2bpf_hierarchy2.c:66:9: error: input operand constraint contains '+'
66 | asm volatile (""::"r+"(ret));
| ^~~
Changed implementation to make use of __sink macro that abstracts the
desired behaviour.
The proposed change seems valid for both GCC and CLANG.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-4-cupertino.miranda@oracle.com
|
|
verfifier_nocsr.c fails to compile in GCC. The reason behind it was
initially explained in commit 27a90b14b93d3b2e1efd10764e456af7e2a42991.
"A few BPF selftests perform type punning and they may break strict
aliasing rules, which are exploited by both GCC and clang by default
while optimizing. This can lead to broken compiled programs."
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-2-cupertino.miranda@oracle.com
|
|
Add it to the record.sh shell test to verify if it tracks cgroup
information correctly. It records with --all-cgroups option can check
if it has PERF_RECORD_CGROUP and the names are not "unknown".
$ sudo ./perf test -vv 95
95: perf record tests:
--- start ---
test child forked, pid 2871922
169c90-169cd0 g test_loop
perf does have symbol 'test_loop'
Basic --per-thread mode test
Basic --per-thread mode test [Success]
Register capture test
Register capture test [Success]
Basic --system-wide mode test
Basic --system-wide mode test [Success]
Basic target workload test
Basic target workload test [Success]
Branch counter test
branch counter feature not supported on all core PMUs (/sys/bus/event_source/devices/cpu) [Skipped]
Cgroup sampling test
Cgroup sampling test [Success]
---- end(0) ----
95: perf record tests : Ok
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240818212948.2873156-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The recent change in 'struct perf_tool' constification broke the cgroup
and/or namespace tracking by resetting tool fields. It should set the
values after perf_tool__init().
Fixes: cecb1cf154b301c6 ("perf record: Use perf_tool__init()")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240818212948.2873156-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The handling of mmap and mmap2 events is near identical. Add a common
helper function and call that by the two event handling functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are repipe, build ID and JIT dump variants of the mmap and mmap2
repipe functions. The organization doesn't allow JIT dump to work with
build ID injection and the structure is less than clear. Combine the
function and enable the different behaviors based on ifs.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It is clearer to have a single enum that determines how build ids are
injected, it also allows for future extension.
Set the header build ID feature whether lazy or all are generated,
previously only the lazy case would set it.
Allow parsing of known build IDs for either the lazy or all cases.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Test recording of call-graphs and injecting --build-all. Add/expand
trap handler.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allows evsel__id_hdr_size() to be used when the evsel is const.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The passed dso_id is copied and so is never an out argument. Remove
its mutability.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make it clearer the argument is just being used as a string.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
