| Age | Commit message (Collapse) | Author |
|---|
|
Add tests for FIB rules that match on source and destination ports with
a mask. Test both good and bad flows.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: sport and dport redirect to table [ OK ]
TEST: rule6 check: sport and dport no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport redirect to table [ OK ]
TEST: rule6 check: sport and dport range redirect to table [ OK ]
TEST: rule6 check: sport and dport range no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport range redirect to table [ OK ]
TEST: rule6 check: sport and dport masked redirect to table [ OK ]
TEST: rule6 check: sport and dport masked no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport masked redirect to table [ OK ]
[...]
Tests passed: 292
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, only matching on specific ports is tested. Add port range
testing to make sure this use case does not regress.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds tests for both the happy path and the
error path (with and without the BPF_F_PAD_ZEROS flag).
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250213152125.1837400-3-linux@jordanrome.com
|
|
The kprobe_multi feature was disabled on ARM64 due to the lack of fprobe
support.
The fprobe rewrite on function_graph has been recently merged and thus
brought support for fprobes on arm64. This then enables kprobe_multi
support on arm64, and so the corresponding tests can now be run on this
architecture.
Remove the tests depending on kprobe_multi from DENYLIST.aarch64 to
allow those to run in CI. CONFIG_FPROBE is already correctly set in
tools/testing/selftests/bpf/config
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250219-enable_kprobe_multi_tests-v1-1-faeec99240c8@bootlin.com
|
|
Just wrap the direct err with libbpf_err, keep consistency
with other APIs.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250219153711.29651-1-chen.dylane@linux.dev
|
|
When testing perf trace on NixOS, I noticed significant startup delays:
- `ls`: ~2ms
- `strace ls`: ~10ms
- `perf trace ls`: ~550ms
Profiling showed that 51% of the time is spent reading files,
26% in loading BPF programs, and 11% in `newfstatat`.
This patch optimizes module path exploration by avoiding `stat()` calls
unless necessary. For filesystems that do not implement `d_type`
(DT_UNKNOWN), it falls back to the old behavior.
See `readdir(3)` for details.
This reduces `perf trace ls` time to ~500ms.
A more thorough startup optimization based on command parameters would
be ideal, but that is a larger effort.
Signed-off-by: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Acked-by: Howard Chu <howardchu95@gmail.com>
Link: https://lore.kernel.org/r/20250206113314.335376-2-krzysztof.m.lopatowski@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Currently the code checks that there is no "ipc" in the sort order
and add an ipc string. This will always error out on the second pass
after input reload/switch, since the sort order already contains "ipc".
Do the ipc check/fixup only on the first pass.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20250108063628.215577-1-dvyukov@google.com
Fixes: ec6ae74fe8f0 ("perf report: Display average IPC and IPC coverage per symbol")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The symbol_conf.use_callchain should be reset when switching to new data
file, otherwise report__setup_sample_type() will show an error message
that it enabled callchains but no callchain data. The function also
will turn on the callchains if the data has PERF_SAMPLE_CALLCHAIN so I
think it's ok to reset symbol_conf.use_callchain here.
Link: https://lore.kernel.org/r/20250211060745.294289-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The 's' key is to switch to a new data file and load the data in the
same window. The switch_data_file() will show a popup menu to select
which data file user wants and update the 'input_name' global variable.
But in the cmd_report(), it didn't update the data.path using the new
'input_name' and keep usng the old file. This is fairly an old bug and
I assume people don't use this feature much. :)
Link: https://lore.kernel.org/r/20250211060745.294289-1-namhyung@kernel.org
Closes: https://lore.kernel.org/linux-perf-users/89e678bc-f0af-4929-a8a6-a2666f1294a4@linaro.org
Fixes: f5fc14124c5cefdd ("perf tools: Add data object to handle perf data file")
Reported-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In sysfs, the perf events are all located in
/sys/bus/event_source/devices/ but some places ended up hard-coding the
location to be at the root of /sys/devices/ which could be very risky as
you do not exactly know what type of device you are accessing in sysfs
at that location.
So fix this all up by properly pointing everything at the bus device
list instead of the root of the sysfs devices/ tree.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/2025021955-implant-excavator-179d@gregkh
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When listing in verbose mode, the long description is used but the PMU
name isn't appended. There doesn't seem to be a reason to exclude it
when asking for more information, so use the same print block for both
long and short descriptions.
Before:
$ perf list -v
...
inst_retired
[Instruction architecturally executed]
After:
$ perf list -v
...
inst_retired
[Instruction architecturally executed. Unit: armv8_cortex_a57]
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250219151622.1097289-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Some existing metrics for Neoverse N3 and V3 expressions use CPU_CYCLE
to represent the number of cycles, but this is incorrect. The correct
event to use is CPU_CYCLES.
I encountered this issue while working on a patch to add pmu events for
Cortex A720 and A520 by reusing the existing patch for Neoverse N3 and
V3 by James Clark [1] and my check script [2] reported this issue.
[1] https://lore.kernel.org/lkml/20250122163504.2061472-1-james.clark@linaro.org/
[2] https://github.com/cyyself/arm-pmu-check
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/tencent_D4ED18476ADCE818E31084C60E3E72C14907@qq.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If malloc returns NULL due to low memory, 'config' pointer can be NULL.
Add a check to prevent NULL dereference.
Link: https://lore.kernel.org/r/20250219122715.3892223-1-quic_zhonhan@quicinc.com
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Test the TCP_RTO_MAX_MS optname in the existing setget_sockopt test.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250219081333.56378-3-kerneljasonxing@gmail.com
|
|
Two subtests use the test_in_netns() function to run the test in a
dedicated network namespace. This can now be done directly through the
test_progs framework with a test name starting with 'ns_'.
Replace the use of test_in_netns() by test_ns_* calls.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-4-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Tests are serialized because they all use the loopback interface.
Replace the 'serial_test_' prefixes with 'test_ns_' to benefit from the
new test_prog feature which creates a dedicated namespace for each test,
allowing them to run in parallel.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-3-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some tests are serialized to prevent interference with others.
Open a dedicated network namespace when a test name starts with 'ns_' to
allow more test parallelization. Use the test name as namespace name to
avoid conflict between namespaces.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-2-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Next patch will add a new feature to test_prog to run tests in a
dedicated namespace if the test name starts with 'ns_'. Here the test
name already starts with 'ns_' and creates some namespaces which would
conflict with the new feature.
Rename the test to avoid this conflict.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-1-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a simple test to verify that the new "override_creds" option works.
Link: https://lore.kernel.org/r/20250219-work-overlayfs-v3-4-46af55e4ceda@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a simple test to verify that the new "override_creds" option works.
Link: https://lore.kernel.org/r/20250219-work-overlayfs-v3-3-46af55e4ceda@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a new set of helpers that will be used in follow-up patches.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a simple test to verify that the new "override_creds" option works.
Link: https://lore.kernel.org/r/20250219-work-overlayfs-v3-2-46af55e4ceda@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A test case with ridiculously deep bpf_for() nesting and
a conditional update of a stack location.
Consider the innermost loop structure:
1: bpf_for(o, 0, 10)
2: if (unlikely(bpf_get_prandom_u32()))
3: buf[0] = 42;
4: <exit>
Assuming that verifier.c:clean_live_states() operates w/o change from
the previous patch (e.g. as on current master) verification would
proceed as follows:
- at (1) state {buf[0]=?,o=drained}:
- checkpoint
- push visit to (2) for later
- at (4) {buf[0]=?,o=drained}
- pop (2) {buf[0]=?,o=active}, push visit to (3) for later
- at (1) {buf[0]=?,o=active}
- checkpoint
- push visit to (2) for later
- at (4) {buf[0]=?,o=drained}
- pop (2) {buf[0]=?,o=active}, push visit to (3) for later
- at (1) {buf[0]=?,o=active}:
- checkpoint reached, checkpoint's branch count becomes 0
- checkpoint is processed by clean_live_states() and
becomes {o=active}
- pop (3) {buf[0]=42,o=active}
- at (1), {buf[0]=42,o=active}
- checkpoint
- push visit to (2) for later
- at (4) {buf[0]=42,o=drained}
- pop (2) {buf[0]=42,o=active}, push visit to (3) for later
- at (1) {buf[0]=42,o=active}, checkpoint reached
- pop (3) {buf[0]=42,o=active}
- at (1) {buf[0]=42,o=active}:
- checkpoint reached, checkpoint's branch count becomes 0
- checkpoint is processed by clean_live_states() and
becomes {o=active}
- ...
Note how clean_live_states() converted the checkpoint
{buf[0]=42,o=active} to {o=active} and it can no longer be matched
against {buf[0]=<any>,o=active}, because iterator based states
are compared using stacksafe(... RANGE_WITHIN), that requires
stack slots to have same types. At the same time there are
still states {buf[0]=42,o=active} pushed to DFS stack.
This behaviour becomes exacerbated with multiple nesting levels,
here are veristat results:
- nesting level 1: 69 insns
- nesting level 2: 258 insns
- nesting level 3: 900 insns
- nesting level 4: 4754 insns
- nesting level 5: 35944 insns
- nesting level 6: 312558 insns
- nesting level 7: 1M limit
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A somewhat cumbersome test case sensitive to correct copying of
bpf_verifier_state->loop_entry fields in
verifier.c:copy_verifier_state().
W/o the fix from a previous commit the program is accepted as safe.
1: /* poison block */
2: if (random() != 24) { // assume false branch is placed first
3: i = iter_new();
4: while (iter_next(i));
5: iter_destroy(i);
6: return;
7: }
8:
9: /* dfs_depth block */
10: for (i = 10; i > 0; i--);
11:
12: /* main block */
13: i = iter_new(); // fp[-16]
14: b = -24; // r8
15: for (;;) {
16: if (iter_next(i))
17: break;
18: if (random() == 77) { // assume false branch is placed first
19: *(u64 *)(r10 + b) = 7; // this is not safe when b == -25
20: iter_destroy(i);
21: return;
22: }
23: if (random() == 42) { // assume false branch is placed first
24: b = -25;
25: }
26: }
27: iter_destroy(i);
The goal of this example is to:
(a) poison env->cur_state->loop_entry with a state S,
such that S->branches == 0;
(b) set state S as a loop_entry for all checkpoints in
/* main block */, thus forcing NOT_EXACT states comparisons;
(c) exploit incorrect loop_entry set for checkpoint at line 18
by first creating a checkpoint with b == -24 and then
pruning the state with b == -25 using that checkpoint.
The /* poison block */ is responsible for goal (a).
It forces verifier to first validate some unrelated iterator based
loop, which leads to an update_loop_entry() call in is_state_visited(),
which places checkpoint created at line 4 as env->cur_state->loop_entry.
Starting from line 8, the branch count for that checkpoint is 0.
The /* dfs_depth block */ is responsible for goal (b).
It abuses the fact that update_loop_entry(cur, hdr) only updates
cur->loop_entry when hdr->dfs_depth <= cur->dfs_depth.
After line 12 every state has dfs_depth bigger then dfs_depth of
poisoned env->cur_state->loop_entry. Thus the above condition is never
true for lines 12-27.
The /* main block */ is responsible for goal (c).
Verification proceeds as follows:
- checkpoint {b=-24,i=active} created at line 16;
- jump 18->23 is verified first, jump to 19 pushed to stack;
- jump 23->26 is verified first, jump to 24 pushed to stack;
- checkpoint {b=-24,i=active} created at line 15;
- current state is pruned by checkpoint created at line 16,
this sets branches count for checkpoint at line 15 to 0;
- jump to 24 is popped from stack;
- line 16 is reached in state {b=-25,i=active};
- this is pruned by a previous checkpoint {b=-24,i=active}:
- checkpoint's loop_entry is poisoned and has branch count of 0,
hence states are compared using NOT_EXACT rules;
- b is not marked precise yet.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix few spelling mistakes in net selftests
Signed-off-by: Chandra Mohan Sundar <chandru.dav@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250217141520.81033-1-chandru.dav@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Iterating through array of maps may encounter non existing keys. The
batch operation should not fail on when this happens.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/9007237b9606dc2ee44465a4447fe46e13f3bea6.1739171594.git.yan@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A recent change in the flamegraph script fixed an issue with live mode
but it created another for offline mode. It needs to pass "-" to -i
option to read from stdin in the live mode. Actually there's a logic
to pass the option in the perf script code, but the script was written
with "-- $@" which prevented the option to go to the perf script. So
the previous commit added the hard-coded "-i -" to the report command.
But it's a problem for the offline mode which expects input from a file
and now it's stuck on reading from stdin. Let's remove the "-i - --"
part and let it pass the options properly to perf script.
Closes: https://lore.kernel.org/linux-perf-users/c41e4b04-e1fd-45ab-80b0-ec2ac6e94310@linux.ibm.com
Fixes: 23e0a63c6dd3f69c ("perf script: force stdin for flamegraph in live mode")
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Reorder the struct fields by size to reduce paddings and reduce
struct simd_flags size from 8 to 1 byte.
This reduces struct hist_entry size by 8 bytes (592->584),
and leaves a single more usable 6 byte padding hole.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/7c1cb1c8f9901e945162701ba7269d0f9c70be89.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Ensure basic operation of latency/parallelism profiling and that
main latency/parallelism record/report invocations don't fail/crash.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/c129c8f02f328f68e1e9ef2cdc582f8a9786a97d.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Describe latency and parallelism profiling, related flags, and differences
with the currently only supported CPU-consumption-centric profiling.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/a13f270ed33cedb03ce9ebf9ddbd064854ca0f19.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add record/report --latency flag that allows to capture and show
latency-centric profiles rather than the default CPU-consumption-centric
profiles. For latency profiles record captures context switch events,
and report shows Latency as the first column.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/e9640464bcbc47dde2cb557003f421052ebc9eec.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Latency output field is similar to overhead, but represents overhead for
latency rather than CPU consumption. It's re-scaled from overhead by dividing
weight by the current parallelism level at the time of the sample.
It effectively models profiling with 1 sample taken per unit of wall-clock
time rather than unit of CPU time.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/b6269518758c2166e6ffdc2f0e24cfdecc8ef9c1.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add parallelism filter that can be used to look at specific parallelism
levels only. The format is the same as cpu lists. For example:
Only single-threaded samples: --parallelism=1
Low parallelism only: --parallelism=1-4
High parallelism only: --parallelism=64-128
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/e61348985ff0a6a14b07c39e880edbd60a8f8635.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
We already have all u8 bits taken, adding one more filter leads to unpleasant
failure mode, where code compiles w/o warnings, but the last filters silently
don't work. Add a typedef and switch to u16.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/32b4ce1731126c88a2d9e191dc87e39ae4651cb7.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The tests done by test_xdp_redirect_multi.sh are now fully covered by
the CI through test_xdp_veth.c.
Remove test_xdp_redirect_multi.sh
Remove xdp_redirect_multi.c that was used by the script to load and
attach the BPF programs.
Remove their entries in the Makefile
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-6-fd0d39fca6e6@bootlin.com
|
|
XDP programs loaded on egress is tested by test_xdp_redirect_multi.sh
but not by the test_progs framework.
Add a test case in test_xdp_veth.c to test the XDP program on egress.
Use the same BPF program than test_xdp_redirect_multi.sh that replaces
the source MAC address by one provided through a BPF map.
Use a BPF program that stores the source MAC of received packets in a
map to check the test results.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-5-fd0d39fca6e6@bootlin.com
|
|
XDP redirections with BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS flags
are tested by test_xdp_redirect_multi.sh but not within the test_progs
framework.
Add a broadcast test case in test_xdp_veth.c to test them.
Use the same BPF programs than the one used by
test_xdp_redirect_multi.sh.
Use a BPF map to select the broadcast flags.
Use a BPF map with an entry per veth to check whether packets are
received or not
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-4-fd0d39fca6e6@bootlin.com
|
|
Broadcasting flags are hardcoded for each kind for protocol.
Create a redirect_flags map that allows to select the broadcasting flags
to use in the bpf_redirect_map(). The protocol ID is used as a key.
Set the old hardcoded values as default if the map isn't filled by the
BPF caller.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-3-fd0d39fca6e6@bootlin.com
|
|
Tests use the root network namespace, so they aren't fully independent
of each other. For instance, the index of the created veth interfaces
is incremented every time a new test is launched.
Wrap the network topology in a network namespace to ensure full
isolation. Use the append_tid() helper to ensure the uniqueness of this
namespace's name during parallel runs.
Remove the use of the append_tid() on the veth names as they now belong
to an already unique namespace.
Simplify cleanup_network() by directly deleting the namespaces
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-2-fd0d39fca6e6@bootlin.com
|
|
The network configuration is defined by a table of struct
veth_configuration. This isn't convenient if we want to add a network
configuration that isn't linked to a veth pair.
Create a struct net_configuration that holds the veth_configuration
table to ease adding new configuration attributes in upcoming patch.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-1-fd0d39fca6e6@bootlin.com
|
|
Following a similar rationale as commit e4835f1da425f ("kunit: tool:
Build compile_commands.json"), make a common developer tool available by
default for KUnit users.
Compared to compile_commands.json, there is a little more work to be
done to build the GDB scripts. Is it enough to affect development cycle
duration? Unscientific evaluation:
rm -rf .kunit; time tools/testing/kunit/kunit.py build --kunitconfig ./lib/kunit/.kunitconfig --jobs 96
Without this patch it took 14.77s, with this patch it took 14.83. So,
although `make scripts_gdb` is pretty slow, presumably most of that is
just the overhead of running Kbuild at all, actually building the
scripts is approximately free.
Note also, to actually get the GDB scripts the user needs to enable
CONFIG_SCRIPTS_GDB, but building the scripts_gdb target without that is
still harmless.
Link: https://lore.kernel.org/r/20250121-kunit-gdb-v1-1-faedfd0653ef@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Q is exported from Makefile.include so it is not necessary to manually
set it.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mykola Lysenko <mykolal@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-2-07de4482a581@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce a new kfunc to retrieve the node associated to a CPU:
int scx_bpf_cpu_node(s32 cpu)
Add the following kfuncs to provide BPF schedulers direct access to
per-node idle cpumasks information:
const struct cpumask *scx_bpf_get_idle_cpumask_node(int node)
const struct cpumask *scx_bpf_get_idle_smtmask_node(int node)
s32 scx_bpf_pick_idle_cpu_node(const cpumask_t *cpus_allowed,
int node, u64 flags)
s32 scx_bpf_pick_any_cpu_node(const cpumask_t *cpus_allowed,
int node, u64 flags)
Moreover, trigger an scx error when any of the non-node aware idle CPU
kfuncs are used when SCX_OPS_BUILTIN_IDLE_PER_NODE is enabled.
Cc: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Commit f2868b1a66d4f40f ("perf tools: Expose quiet/verbose variables in
Makefile.perf") moved the quiet infrastructure out of
tools/build/Makefile.build and into the top-level Makefile.perf file so
that the quiet infrastructure could be used throughout perf and not just
in Makefile.build.
Extract out the quiet infrastructure into Makefile.include so that it
can be leveraged outside of perf.
Fixes: f2868b1a66d4f40f ("perf tools: Expose quiet/verbose variables in Makefile.perf")
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mykola Lysenko <mykolal@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <qmo@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-1-07de4482a581@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Changes to MC remote need to be reflected in actual group memberships.
Add a test to verify that it is the case.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of inlining equivalents, use lib.sh-provided primitives.
Use defer to manage vx lifetime.
This will make it easier to extend the test in the next patch.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This helper could be useful to more than just forwarding tests.
Move it upstairs and port over to log_test_skip().
Split the function into two parts: the bit that actually checks and
reports skip, which is in a new function check_command(). And a bit
that exits the test script if the check fails. This allows users
consistent checking behavior while giving an option to bail out from
a single test without bailing out of the whole script.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Verify that for a connectible AF_VSOCK socket, merely having a transport
assigned is insufficient; socket must be connected for the sockmap to
accept.
This does not test datagram vsocks. Even though it hardly matters. VMCI is
the only transport that features VSOCK_TRANSPORT_F_DGRAM, but it has an
unimplemented vsock_transport::readskb() callback, making it unsupported by
BPF/sockmap.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 515745445e92 ("selftest/bpf: Add test for vsock removal from sockmap
on close()") added test that checked if proto::close() callback was invoked
on AF_VSOCK socket release. I.e. it verified that a close()d vsock does
indeed get removed from the sockmap.
It was done simply by creating a socket pair and attempting to replace a
close()d one with its peer. Since, due to a recent change, sockmap does not
allow updating index with a non-established connectible vsock, redo it with
a freshly established one.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pick up upstream x86 fixes before applying new patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
