| Age | Commit message (Collapse) | Author |
|---|
|
There are a couple of statements with two following semicolons,
replace these with just one semicolon.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240802113436.448939-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A single fix to the conditional in ksft.py script which incorrectly
flags a test suite failed when there are skipped tests in the mix.
The logic is fixed to take skipped tests into account and report the
test as passed"
* tag 'linux_kselftest-fixes-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: ksft: Fix finished() helper exit code on skipped tests
|
|
Add new test cases to test_cpuset_prs.sh to cover corner cases reported
in previous fix commits.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Like in 'perf report', we want to hide empty events in the 'perf annotate'
output. This is consistent when the option is set in perf report.
For example, the following command would use 3 events including dummy.
$ perf mem record -a -- perf test -w noploop
$ perf evlist
cpu/mem-loads,ldlat=30/P
cpu/mem-stores/P
dummy:u
Just using perf annotate with --group will show the all 3 events.
$ perf annotate --group --stdio | head
Percent | Source code & Disassembly of ...
--------------------------------------------------------------
: 0 0xe060 <_dl_relocate_object>:
0.00 0.00 0.00 : e060: pushq %rbp
0.00 0.00 0.00 : e061: movq %rsp, %rbp
0.00 0.00 0.00 : e064: pushq %r15
0.00 0.00 0.00 : e066: movq %rdi, %r15
0.00 0.00 0.00 : e069: pushq %r14
0.00 0.00 0.00 : e06b: pushq %r13
0.00 0.00 0.00 : e06d: movl %edx, %r13d
Now with --skip-empty, it'll hide the last dummy event.
$ perf annotate --group --stdio --skip-empty | head
Percent | Source code & Disassembly of ...
------------------------------------------------------
: 0 0xe060 <_dl_relocate_object>:
0.00 0.00 : e060: pushq %rbp
0.00 0.00 : e061: movq %rsp, %rbp
0.00 0.00 : e064: pushq %r15
0.00 0.00 : e066: movq %rdi, %r15
0.00 0.00 : e069: pushq %r14
0.00 0.00 : e06b: pushq %r13
0.00 0.00 : e06d: movl %edx, %r13d
Committer testing:
root@x1:~# perf evlist
cpu_atom/mem-loads,ldlat=30/P
cpu_atom/mem-stores/P
dummy:u
root@x1:~#
Before:
root@x1:~# perf annotate --group --stdio2 do_lookup_x | head -25
Samples: 20 of events 'cpu_atom/mem-loads,ldlat=30/P, cpu_atom/mem-stores/P, dummy:u', 4000 Hz, Event count (approx.): 769079, [percent: local period]
do_lookup_x() /usr/lib64/ld-linux-x86-64.so.2
Percent 0x9900 <do_lookup_x>:
pushq %rbp
movq %rsp,%rbp
pushq %r15
pushq %r14
pushq %r13
pushq %r12
pushq %rbx
subq $0x88,%rsp
movq %rdi,-0x50(%rbp)
movl 8(%r9),%edi
movq 0x10(%rbp),%r12
movq 0x28(%rbp),%r10
movq %rdx,-0x70(%rbp)
movq %rcx,-0x58(%rbp)
movq %rdi,%r11
0.00 5.73 0.00 movq %r8,-0x68(%rbp)
movq (%r9),%r8
movl %esi,%eax
8.30 0.00 0.00 movl 0x30(%rbp),%r9d
movl %esi,%r15d
shrl $6, %eax
movq %r8,%r13
root@x1:~#
After:
root@x1:~# perf annotate --group --skip-empty --stdio2 do_lookup_x | head -25
Samples: 20 of events 'cpu_atom/mem-loads,ldlat=30/P, cpu_atom/mem-stores/P', 4000 Hz, Event count (approx.): 769079, [percent: local period]
do_lookup_x() /usr/lib64/ld-linux-x86-64.so.2
Percent 0x9900 <do_lookup_x>:
pushq %rbp
movq %rsp,%rbp
pushq %r15
pushq %r14
pushq %r13
pushq %r12
pushq %rbx
subq $0x88,%rsp
movq %rdi,-0x50(%rbp)
movl 8(%r9),%edi
movq 0x10(%rbp),%r12
movq 0x28(%rbp),%r10
movq %rdx,-0x70(%rbp)
movq %rcx,-0x58(%rbp)
movq %rdi,%r11
0.00 5.73 movq %r8,-0x68(%rbp)
movq (%r9),%r8
movl %esi,%eax
8.30 0.00 movl 0x30(%rbp),%r9d
movl %esi,%r15d
shrl $6, %eax
movq %r8,%r13
root@x1:~#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240803211332.1107222-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a preparation to support skipping empty events.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240803211332.1107222-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The annotation__pcnt_width() calculates the screen width for the
overhead (percent) area considering event groups properly. Use this
function consistently so that we can make sure it has similar output
in different modes. But there's a difference in stdio and tui output:
stdio uses 8 and tui uses 7 for a percent.
Let's use 8 and adjust the print width in __annotation_line__write()
properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240803211332.1107222-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We want to use it in different places so make sure it sets properly
in symbol__annotate() before creating the disasm lines.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240803211332.1107222-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The data_nr keeps the number of entries in al->data[] so it should use
it when it iterates the array. The notes->src->nr_events should have
the same number but it'd be natural to use al->data_nr.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240803211332.1107222-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dependencies in tools/lib/bpf/Makefile are incorrect. Before we
recurse to build $(BPF_IN_STATIC), we need to build its 'fixdep'
executable.
I can't use the usual shortcut from Makefile.include:
<target>: <sources> fixdep
because its 'fixdep' target relies on $(OUTPUT), and $(OUTPUT) differs
in the parent 'make' versus the child 'make' -- so I imitate it via
open-coding.
I tweak a few $(MAKE) invocations while I'm at it, because
1. I'm adding a new recursive make; and
2. these recursive 'make's print spurious lines about files that are "up
to date" (which isn't normally a feature in Kbuild subtargets) or
"jobserver not available" (see [1])
I also need to tweak the assignment of the OUTPUT variable, so that
relative path builds work. For example, for 'make tools/lib/bpf', OUTPUT
is unset, and is usually treated as "cwd" -- but recursive make will
change cwd and so OUTPUT has a new meaning. For consistency, I ensure
OUTPUT is always an absolute path.
And $(Q) gets a backup definition in tools/build/Makefile.include,
because Makefile.include is sometimes included without
tools/build/Makefile, so the "quiet command" stuff doesn't actually work
consistently without it.
After this change, top-level builds result in an empty grep result from:
$ grep 'cannot find fixdep' $(find tools/ -name '*.cmd')
[1] https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html
If we're not using $(MAKE) directly, then we need to use more '+'.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240715203325.3832977-4-briannorris@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'fixdep' tool is used to post-process dependency files for various
reasons, and it runs after every object file generation command. This
even includes 'fixdep' itself.
In Kbuild, this isn't actually a problem, because it uses a single
command to generate fixdep (a compile-and-link command on fixdep.c), and
afterward runs the fixdep command on the accompanying .fixdep.cmd file.
In tools/ builds (which notably is maintained separately from Kbuild),
fixdep is generated in several phases:
1. fixdep.c -> fixdep-in.o
2. fixdep-in.o -> fixdep
Thus, fixdep is not available in the post-processing for step 1, and
instead, we generate .cmd files that look like:
## from tools/objtool/libsubcmd/.fixdep.o.cmd
# cannot find fixdep (/path/to/linux/tools/objtool/libsubcmd//fixdep)
[...]
These invalid .cmd files are benign in some respects, but cause problems
in others (such as the linked reports).
Because the tools/ build system is rather complicated in its own right
(and pointedly different than Kbuild), I choose to simply open-code the
rule for building fixdep, and avoid the recursive-make indirection that
produces the problem in the first place.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/all/Zk-C5Eg84yt6_nml@google.com/
Link: https://lore.kernel.org/r/20240715203325.3832977-3-briannorris@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
All built targets need fixdep to be built first, before handling object
dependencies [1]. We're missing one such dependency before the libsubcmd
target.
This resolves .cmd file generation issues such that the following
sequence produces many fewer results:
$ git clean -xfd tools/
$ make tools/objtool
$ grep "cannot find fixdep" $(find tools/objtool -name '*.cmd')
In particular, only a buggy tools/objtool/libsubcmd/.fixdep.o.cmd
remains, due to circular dependencies of fixdep on itself.
Such incomplete .cmd files don't usually cause a direct problem, since
they're designed to fail "open", but they can cause some subtle problems
that would otherwise be handled by proper fixdep'd dependency files. [2]
[1] This problem is better described in commit abb26210a395 ("perf
tools: Force fixdep compilation at the start of the build"). I don't
apply its solution here, because additional recursive make can be a bit
of overkill.
[2] Example failure case:
cp -arl linux-src linux-src2
cd linux-src2
make O=/path/to/out
cd ../linux-src
rm -rf ../linux-src2
make O=/path/to/out
Previously, we'd see errors like:
make[6]: *** No rule to make target
'/path/to/linux-src2/tools/include/linux/compiler.h', needed by
'/path/to/out/tools/bpf/resolve_btfids/libsubcmd/exec-cmd.o'. Stop.
Now, the properly-fixdep'd .cmd files will ignore a missing
/path/to/linux-src2/...
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/all/ZGVi9HbI43R5trN8@bhelgaas/
Link: https://lore.kernel.org/all/Zk-C5Eg84yt6_nml@google.com/
Link: https://lore.kernel.org/r/20240715203325.3832977-2-briannorris@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a common options section and move some items to the section. Also
add description of new options to report options.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/lkml/20240802180913.1023886-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In many modern Linux distros, running `lsvmbus` returns the error:
```
/usr/bin/env: 'python': No such file or directory
```
because 'python' doesn't point anywhere.
Now that python2 has reached EOL as of January 1, 2020 and is no longer
maintained[1], these distros have python3 instead.
Also, the script isn't executable by default because the permissions are
set to mode 644.
Fix this by updating the shebang in the `lsvmbus` to use python3 instead
of python. Also fix the permissions to be 755 so that is executable by
default, which matches other similar scripts in `tools/hv`.
The script is also tested and verified that is compatible with
python3.
[1] https://www.python.org/doc/sunset-python-2/
Signed-off-by: Anthony Nandaa <profnandaa@gmail.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240702102250.13935-1-profnandaa@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240702102250.13935-1-profnandaa@gmail.com>
|
|
Print more stack frames and the failing line when check fails.
This helps when tests use helpers to do the checks.
Before:
# At ./ksft/drivers/net/hw/rss_ctx.py line 92:
# Check failed 1037698 >= 396893.0 traffic on other queues:[344612, 462380, 233020, 449174, 342298]
not ok 8 rss_ctx.test_rss_context_queue_reconfigure
After:
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 387, in test_rss_context_queue_reconfigure:
# Check| test_rss_queue_reconfigure(cfg, main_ctx=False)
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 230, in test_rss_queue_reconfigure:
# Check| _send_traffic_check(cfg, port, ctx_ref, { 'target': (0, 3),
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 92, in _send_traffic_check:
# Check| ksft_lt(sum(cnts[i] for i in params['noise']), directed / 2,
# Check failed 1045235 >= 405823.5 traffic on other queues (context 1)':[460068, 351995, 565970, 351579, 127270]
not ok 8 rss_ctx.test_rss_context_queue_reconfigure
Link: https://patch.msgid.link/20240801232317.545577-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr suggested to use errno.EOPNOTSUPP instead of hard-coded 95
in the new test case. Adjust existing ones to match this style.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new @ksft_disruptive decorator to mark the tests that might
be disruptive to the system. Depending on how well the previous
test works in the CI we might want to disable disruptive tests
by default and only let the developers run them manually.
KSFT framework runs disruptive tests by default. DISRUPTIVE=False
environment (or config file) can be used to disable these tests.
ksft_setup should be called by the test cases that want to use
new decorator (ksft_setup is only called via NetDrvEnv/NetDrvEpEnv for now).
In the future we can add similar decorators to, for example, avoid
running slow tests all the time. And/or have some option to run
only 'fast' tests for some sort of smoke test scenario.
$ DISRUPTIVE=False ./stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down # SKIP marked as disruptive
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:1 error:0
v3:
- parse yes and properly treat non-zero nums as true (Petr)
v2:
- convert from cli argument to env variable (Jakub)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Verify that total device stats don't decrease after it has been turned down.
Also make sure the device doesn't crash when we access per-queue stats
when it's down (in case it tries to access some pointers that are NULL).
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
v3:
- use errno.EOPNOTSUPP (Petr)
- move qstat[0] under try (Petr)
v2:
- KTAP output formatting (Jakub)
- defer instead of try/finally (Jakub)
- disappearing stats is an error (Jakub)
- ksft_ge instead of open coding (Jakub)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub reported bpf selftest "btf_dump" failure after forwarding to
v6.11-rc1 with netdev.
Error: #33 btf_dump
Error: #33/15 btf_dump/btf_dump: var_data
btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0
The reason for the failure is due to
commit 94ede2a3e913 ("profiling: remove stale percpu flip buffer variables")
where percpu static variable "cpu_profile_flip" is removed.
Let us replace "cpu_profile_flip" with a variable in bpf subsystem
so whenever that variable gets deleted or renamed, we can detect the
failure immediately. In this case, I picked a static percpu variable
"bpf_cgrp_storage_busy" which is defined in kernel/bpf/bpf_cgrp_storage.c.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240802185434.1749056-1-yonghong.song@linux.dev
|
|
Pull kvm updates from Paolo Bonzini:
"The bulk of the changes here is a largish change to guest_memfd,
delaying the clearing and encryption of guest-private pages until they
are actually added to guest page tables. This started as "let's make
it impossible to misuse the API" for SEV-SNP; but then it ballooned a
bit.
The new logic is generally simpler and more ready for hugepage support
in guest_memfd.
Summary:
- fix latent bug in how usage of large pages is determined for
confidential VMs
- fix "underline too short" in docs
- eliminate log spam from limited APIC timer periods
- disallow pre-faulting of memory before SEV-SNP VMs are initialized
- delay clearing and encrypting private memory until it is added to
guest page tables
- this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages can
now be moved in the common kvm_gmem_populate() function
- fix compilation error that the RISC-V merge introduced in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
KVM: riscv: selftests: Fix compile error
KVM: guest_memfd: abstract how prepared folios are recorded
KVM: guest_memfd: let kvm_gmem_populate() operate only on private gfns
KVM: extend kvm_range_has_memory_attributes() to check subset of attributes
KVM: cleanup and add shortcuts to kvm_range_has_memory_attributes()
KVM: guest_memfd: move check for already-populated page to common code
KVM: remove kvm_arch_gmem_prepare_needed()
KVM: guest_memfd: make kvm_gmem_prepare_folio() operate on a single struct kvm
KVM: guest_memfd: delay kvm_gmem_prepare_folio() until the memory is passed to the guest
KVM: guest_memfd: return locked folio from __kvm_gmem_get_pfn
KVM: rename CONFIG_HAVE_KVM_GMEM_* to CONFIG_HAVE_KVM_ARCH_GMEM_*
KVM: guest_memfd: do not go through struct page
KVM: guest_memfd: delay folio_mark_uptodate() until after successful preparation
KVM: guest_memfd: return folio from __kvm_gmem_get_pfn()
KVM: x86: disallow pre-fault for SNP VMs before initialization
KVM: Documentation: Fix title underline too short warning
KVM: x86: Eliminate log spam from limited APIC timer periods
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid dropping some of the internal pseudo-extensions, which
breaks *envcfg dependency parsing
- The kernel entry address is now aligned in purgatory, which avoids a
misaligned load that can lead to crash on systems that don't support
misaligned accesses early in boot
- The FW_SFENCE_VMA_RECEIVED perf event was duplicated in a handful of
perf JSON configurations, one of them been updated to
FW_SFENCE_VMA_ASID_SENT
- The starfive cache driver is now restricted to 64-bit systems, as it
isn't 32-bit clean
- A fix for to avoid aliasing legacy-mode perf counters with software
perf counters
- VM_FAULT_SIGSEGV is now handled in the page fault code
- A fix for stalls during CPU hotplug due to IPIs being disabled
- A fix for memblock bounds checking. This manifests as a crash on
systems with discontinuous memory maps that have regions that don't
fit in the linear map
* tag 'riscv-for-linus-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix linear mapping checks for non-contiguous memory regions
RISC-V: Enable the IPI before workqueue_online_cpu()
riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()
perf: riscv: Fix selecting counters in legacy mode
cache: StarFive: Require a 64-bit system
perf arch events: Fix duplicate RISC-V SBI firmware event name
riscv/purgatory: align riscv_kernel_entry
riscv: cpufeature: Do not drop Linux-internal extensions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be on
alpha"
* tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
alpha: fix ioread64be()/iowrite64be() helpers
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes. This is a bit larger than usual but doesn't seem
too crazy.
Most of it is vmwgfx changes that fix a bunch of issues with wayland
userspaces with dma-buf/external buffers and modesetting fixes.
Otherwise it's kinda spread out, v3d fixes some new ioctls, nouveau
has regression revert and fixes, amdgpu, i915 and ast have some small
fixes, and some core fixes spread about.
client:
- fix error code
atomic:
- allow damage clips with async flips
- allow explicit sync with async flips
kselftests:
- fix dmabuf-heaps test
panic:
- fix schedule_work in panic paths
panel:
- fix OrangePi Neo orientation
gpuvm:
- fix missing dependency
amdgpu:
- SMU 14.x update
- Fix contiguous VRAM handling for IB parsing
- GFX 12 fix
- Regression fix for old APUs
i915:
- Static analysis fix for int overflow
- Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12
nouveau:
- revert busy wait change that caused a resume regression
- fix buffer placement fault on dynamic pm s/r
- fix refcount underflow
ast:
- fix black screen on resume
- wake during connector status detect
v3d:
- fix issues with perf/timestamp ioctls
vmwgfx:
- fix deadlock in dma-buf fence polling
- fix screen surface refcounting
- fix dumb buffer handling
- fix support for external buffers
- fix overlay with screen targets
- trigger modeset on screen moves"
* tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
Revert "nouveau: rip out busy fence waits"
nouveau: set placement to original placement on uvmm validate.
drm/atomic: Allow userspace to use damage clips with async flips
drm/atomic: Allow userspace to use explicit sync with atomic async flips
drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()
drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macro
drm/ast: astdp: Wake up during connector status detection
i915/perf: Remove code to update PWR_CLK_STATE for gen12
kselftests: dmabuf-heaps: Ensure the driver name is null-terminated
drm/client: Fix error code in drm_client_buffer_vmap_local()
drm/amdgpu: Fix APU handling in amdgpu_pm_load_smu_firmware()
drm/amdgpu: increase mes log buffer size for gfx12
drm/amdgpu: fix contiguous handling for IB parsing v2
drm/amdgpu/pm: support gpu_metrics sysfs interface for smu v14.0.2/3
drm/vmwgfx: Trigger a modeset when the screen moves
drm/vmwgfx: Fix overlay when using Screen Targets
drm/vmwgfx: Add basic support for external buffers
drm/vmwgfx: Fix handling of dumb buffers
drm/vmwgfx: Make sure the screen surface is ref counted
drm/vmwgfx: Fix a deadlock in dma buf fence polling
...
|
|
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a34 ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df4a ("uprobe: Wire up uretprobe system call")
Fixes: 63ded110979b ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a few new tests to exercise the signal handler flow, especially with
PKEY 0 disabled:
- Verify that the SIGSEGV handler is invoked when pkey 0 is disabled.
- Verify that a thread which disables PKEY 0 segfaults with PKUERR when
accessing the stack.
- Verify that the SIGSEGV handler that uses an alternate signal stack is
correctly invoked when the thread disabled PKEY 0
- Verify that the PKRU value set by the application is correctly restored
upon return from signal handling.
- Verify that sigreturn() is able to restore the altstack even if the
thread had PKEY 0 disabled
[ Aruna: Adapted to upstream ]
[ tglx: Made it actually compile. Restored protection_keys compile. Added
useful info to the changelog instead of bare function names. ]
Signed-off-by: Keith Lucas <keith.lucas@oracle.com>
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240802061318.2140081-6-aruna.ramakrishna@oracle.com
|
|
This way uprobe_unregister() and uprobe_apply() can use "struct uprobe *"
rather than inode + offset. This simplifies the code and allows to avoid
the unnecessary find_uprobe() + put_uprobe() in these functions.
TODO: uprobe_unregister() still needs get_uprobe/put_uprobe to ensure that
this uprobe can't be freed before up_write(&uprobe->register_rwsem).
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240801132734.GA8803@redhat.com
|
|
It doesn't make any sense to have 2 versions of _register(). Note that
trace_uprobe_enable(), the only user of uprobe_register(), doesn't need
to check tu->ref_ctr_offset to decide which one should be used, it could
safely pass ref_ctr_offset == 0 to uprobe_register_refctr().
Add this argument to uprobe_register(), update the callers, and kill
uprobe_register_refctr().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240801132728.GA8800@redhat.com
|
|
testmod_unregister_uprobe() forgets to path_put(&uprobe.path).
Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240801132724.GA8791@redhat.com
|
|
Introduce two tests, one for SOCK_STREAM and one for SOCK_SEQPACKET,
which use SIOCOUTQ ioctl to check that the number of unsent bytes is
zero after delivering a packet.
vsock_connect and vsock_accept are no longer static: this is to
create more generic tests, allowing code to be reused for SEQPACKET
and STREAM.
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For parsing the cpuid bitfields, kcpuid uses an incomplete CSV file with
300+ bitfields.
Use an auto-generated CSV file from the x86-cpuid.org project instead.
It provides complete bitfields coverage: 830+ bitfields, all with proper
descriptions.
The auto-generated file has the following blurb automatically added:
# SPDX-License-Identifier: CC0-1.0
# Generator: x86-cpuid-db v1.0
The generator tag includes the project's workspace "git describe"
version string. It is intended for projects like KernelCI, to aid in
verifying that the auto-generated files have not been tampered with.
The file also has the blurb:
# Auto-generated file.
# Please submit all updates and bugfixes to https://x86-cpuid.org
It's thus kindly requested that the Linux kernel's x86 tree maintainers
enforce sending all updates to x86-cpuid.org's upstream database first,
thus benefiting the whole ecosystem.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://gitlab.com/x86-cpuid.org/x86-cpuid-db/-/blob/v1.0/LICENSE.rst
Link: https://gitlab.com/x86-cpuid.org/x86-cpuid-db
Link: https://lore.kernel.org/all/20240718134755.378115-9-darwi@linutronix.de
|
|
It's a common pattern in cpuid leaves to have the same bitfields format
repeated across a number of subleaves. Typically, this is used for
enumerating hierarchial structures like cache and TLB levels, CPU
topology levels, etc.
Modify kcpuid.c to handle subleaf ranges in the CSV file subleaves
column. For example, make it able to parse lines in the form:
# LEAF, SUBLEAVES, reg, bits, short_name , ...
0xb, 1:0, eax, 4:0, x2apic_id_shift , ...
0xb, 1:0, ebx, 15:0, domain_lcpus_count , ...
0xb, 1:0, ecx, 7:0, domain_nr , ...
This way, full output can be printed to the user.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-8-darwi@linutronix.de
|
|
cpuid.csv will be extended in further commits with all-publicly-known
CPUID leaves and bitfields. Thus, modify has_subleafs() to identify all
known leaves with subleaves.
Remove the redundant "is_amd" check since all x86 vendors already report
the maxium supported extended leaf at leaf 0x80000000 EAX register.
The extra mentioned leaves are:
- Leaf 0x12, Intel Software Guard Extensions (SGX) enumeration
- Leaf 0x14, Intel process trace (PT) enumeration
- Leaf 0x17, Intel SoC vendor attributes enumeration
- Leaf 0x1b, Intel PCONFIG (Platform configuration) enumeration
- Leaf 0x1d, Intel AMX (Advanced Matrix Extensions) tile information
- Leaf 0x1f, Intel v2 extended topology enumeration
- Leaf 0x23, Intel ArchPerfmonExt (Architectural PMU ext) enumeration
- Leaf 0x80000020, AMD Platform QoS extended features enumeration
- Leaf 0x80000026, AMD v2 extended topology enumeration
Set the 'max_subleaf' variable for all the newly marked leaves with extra
subleaves. Ideally, this should be fetched from the CSV file instead,
but the current kcpuid code architecture has two runs: one run to
serially invoke the cpuid instructions and save all the output in-memory,
and one run to parse this in-memory output through the CSV specification.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-7-darwi@linutronix.de
|
|
While parsing and saving bitfield names from the CSV file, an extra
leading space is copied verbatim. That extra space is not a big issue
now, but further commits will add a new CSV file with much more padding
for the bitfield's name column.
Strip leading/trailing whitespaces while saving bitfield names.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-6-darwi@linutronix.de
|
|
Protect against the kcpuid code parsing faulty max subleaf numbers
through a min() expression. Thus, ensuring that max_subleaf will always
be ≤ MAX_SUBLEAF_NUM.
Use "u32" for the subleaf numbers since kcpuid is compiled with -Wextra,
which includes signed/unsigned comparisons warnings.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-5-darwi@linutronix.de
|
|
cpuid.csv will be extended in further commits with all-publicly-known
CPUID leaves and bitfields. One of the new leaves is 0xd for extended
CPU state enumeration. Depending on XCR0 dword bits, it can export up to
64 subleaves.
Set kcpuid.c MAX_SUBLEAF_NUM to 64.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-4-darwi@linutronix.de
|
|
When kcpuid is invoked with "--all --details", the detailed description
column is not properly aligned for all bitfield rows:
CPUID_0x4_ECX[0x0]:
cache_level : 0x1 - Cache Level ...
cache_self_init - Cache Self Initialization
This is due to differences in output handling between boolean single-bit
"bitflags" and multi-bit bitfields. For the former, the bitfield's value
is not outputted as it is implied to be true by just outputting the
bitflag's name in its respective line.
If long descriptions were requested through the --all parameter, properly
align the bitflag's description columns through extra tabs. With that,
the sample output above becomes:
CPUID_0x4_ECX[0x0]:
cache_level : 0x1 - Cache Level ...
cache_self_init - Cache Self Initialization
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-3-darwi@linutronix.de
|
|
Global variable "num_leafs" is set in multiple places but is never read
anywhere. Remove it.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-2-darwi@linutronix.de
|
|
It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.
But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.
While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the following commit, the client will initiate the ADD_ADDR, instead
of the server. We need to way to verify the ADD_ADDR have been correctly
sent.
Note: the default expected counters for when the port number is given
are never changed by the caller, no need to accept them as parameter
then.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is just a shortcut to have 'type' in the sort key and use more
compact output format like below.
$ perf mem report -T
...
#
# Overhead Samples Memory access Snoop TLB access Data Type
# ........ ............ ....................................... ............ ...................... .........
#
14.84% 22 L1 hit None L1 or L2 hit (unknown)
7.68% 8 LFB/MAB hit None L1 or L2 hit (unknown)
7.17% 3 RAM hit Hit L2 miss (unknown)
6.29% 12 L1 hit None L1 or L2 hit (stack operation)
4.85% 5 RAM hit Hit L1 or L2 hit (unknown)
3.97% 5 LFB/MAB hit None L1 or L2 hit struct psi_group_cpu
3.18% 3 LFB/MAB hit None L1 or L2 hit (stack operation)
2.58% 3 L1 hit None L1 or L2 hit unsigned int
2.36% 2 L1 hit None L1 or L2 hit struct
2.31% 2 L1 hit None L1 or L2 hit struct psi_group_cpu
...
Users also can use their own sort keys and -T option makes sure it has
the 'type' sort key at the end.
$ perf mem report -T -s mem
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240731235505.710436-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So that users can set the sort key manually as they want.
$ perf mem report -s
Error: switch `s' requires a value
Usage: perf mem report [<options>]
-s, --sort <key[,key2...]>
sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys
overhead_guest_us overhead_children sample period
weight1 weight2 weight3 ins_lat retire_lat p_stage_cyc
pid comm dso symbol parent cpu socket srcline srcfile
local_weight weight transaction trace symbol_size
dso_size cgroup cgroup_id ipc_null time code_page_size
local_ins_lat ins_lat local_p_stage_cyc p_stage_cyc
addr local_retire_lat retire_lat simd type typeoff
symoff symbol_daddr dso_daddr locked tlb mem snoop
dcacheline symbol_iaddr phys_daddr data_page_size
blocked
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240731235505.710436-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some sort keys are meaningful only in a specific mode - like branch
stack and memory (data-src). Add the mode to skip unnecessary ones.
This will be used for 'perf mem report' later.
While at it, change the prefix for the -F/--fields option to remove
the duplicate part.
Before:
$ perf report -F
Error: switch `F' requires a value
Usage: perf report [<options>]
-F, --fields <key[,keys...]>
output field(s): overhead period sample overhead overhead_sys
overhead_us overhead_guest_sys overhead_guest_us overhead_children
sample period weight1 weight2 weight3 ins_lat retire_lat
...
After:
$ perf report -F
Error: switch `F' requires a value
Usage: perf report [<options>]
-F, --fields <key[,keys...]>
output field(s): overhead overhead_sys overhead_us
overhead_guest_sys overhead_guest_us overhead_children
sample period weight1 weight2 weight3 ins_lat retire_lat
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240731235505.710436-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Split the common option and ones for record or report. Otherwise -U in
the record option cannot be used because it clashes with in the common
(or report) option. Also rename report_events() to __cmd_report() to
follow the convention and to be sync with the record part.
Also set the flag PARSE_OPT_STOP_AT_NON_OPTION for the common option so
that it can show the help message in the subcommand like below:
$ perf mem record -h
Usage: perf mem record [<options>] [<command>]
or: perf mem record [<options>] -- <command> [<options>]
-C, --cpu <cpu> list of cpus to profile
-e, --event <event> event selector. use 'perf mem record -e list' to list available events
-f, --force don't complain, do it
-K, --all-kernel collect only kernel level data
-p, --phys-data Record/Report sample physical addresses
-t, --type <type> memory operations(load,store) Default load,store
-U, --all-user collect only user level data
-v, --verbose be more verbose (show counter open errors, etc)
--data-page-size Record/Report sample data address page size
--ldlat <n> mem-loads latency
Cc: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240731235505.710436-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The get_sort_order() returns either a new string (from strdup) or NULL
but it never gets freed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 2e7f545096f954a9 ("perf mem: Factor out a function to generate sort order")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240731235505.710436-3-namhyung@kernel.org
[ Added Fixes tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'struct mem_info' is created by iter_prepare_mem_entry() at the
beginning and destroyed by iter_finish_mem_entry() at the end.
So if it's used in a new hist_entry, it should be cloned.
Simplify (hopefully) the logic by adding some helper functions and by
not holding the refcount in the temporary entry.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240731235505.710436-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When perf code was compiled one way for the binary and another for the
python module, the PYTHON_PERF ifdef was used to remove some code from
the python module.
Since switching to building the perf code as a series of libraries, with
the same libraries being used for the python module, the ifdefs became
unused as PYTHON_PERF is never defined. As such remove the ifdefs.
Fixes: 9dabf4003423c8d3 ("perf python: Switch module to linking libraries from building source")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240731230005.12295-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
empty-pmu-events.c exists so that builds may occur without python
being installed on a system. Manually updating empty-pmu-events.c to
be in sync with jevents.py is a pain, let's use jevents.py to generate
empty-pmu-events.c.
1) change jevents.py so that an arch and model of none cause
generation of a pmu-events.c without any json. Add a SPDX and
autogenerated warning to the start of the file.
2) change Build so that if a generated pmu-events.c for arch none and
model none doesn't match empty-pmu-events.c the build fails with a
cat of the differences. Update Makefile.perf to clean up the files
used for this.
3) update empty-pmu-events.c to match the output of jevents.py with
arch and mode of none.
Committer notes:
The firtst paragraph is confusing, so I asked and Ian further clarified:
---
The requirement for python hasn't changed.
Case 1: no python or NO_JEVENTS=1
Build happens using empty-pmu-events.c that is checked in, no python
is required.
Case 2: python
pmu-events.c is created by jevents.py (requiring python) and then built.
This change adds a step where the empty-pmu-events.c is created using
jevents.py and that file is diffed against the checked in version.
This stops the checked in empty-pmu-events.c diverging if changes are
made to jevents.py. If the diff causes the build to fail then you just
copy the diff empty-pmu-events.c over the checked in one.
---
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Sang <oliver.sang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philip Li <philip.li@intel.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240730191744.3097329-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
capstone bpf headers
There is a clash of the libbpf and capstone libraries, that ends up
with:
In file included from /usr/include/capstone/capstone.h:325,
from util/disasm.c:1513:
/usr/include/capstone/bpf.h:94:14: error: ‘bpf_insn’ defined as wrong kind of tag
94 | typedef enum bpf_insn {
So far we're just trying to avoid this by not having both headers
included in the same .c or .h file, do it one more time by moving the
BPF diassembly routines from util/disasm.c to util/disasm_bpf.c.
This is only being hit when building with BUILD_NONDISTRO=1, i.e.
building with binutils-devel, that isn't the in the default build due to
a licencing clash. We need to reimplement what is now isolated in
util/disasm_bpf.c using some other library to have BPF annotation
feature that now only is available with BUILD_NONDISTRO=1.
Fixes: 6d17edc113de1e21 ("perf annotate: Use libcapstone to disassemble")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZqpUSKPxMwaQKORr@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The acct() system call enables or disables process accounting.
If accounting is turned on, records for each terminating process
are appended to a specified filename as it terminates. An argument of NULL
causes accounting to be turned off.
This patch will add a test for the acct() syscall.
Signed-off-by: Abdulrasaq Lawani <abdulrasaqolawani@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The strscpy test loads test_strscpy module for testing. But test_strscpy
was converted to Kunit (see fixes). Hence remove strscpy.
Fixes: 41eefc46a3a4 ("string: Convert strscpy() self-test to KUnit")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
