| Age | Commit message (Collapse) | Author |
|---|
|
LoongArch architecture changes for 6.15 depend on the objtool-core
changes to work well for UNWINDER_ORC, so merge them to create a base.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bluetooth and ipsec.
This contains a last minute revert of a recent GRE patch, mostly to
allow me stating there are no known regressions outstanding.
Current release - regressions:
- revert "gre: Fix IPv6 link-local address generation."
- eth: ti: am65-cpsw: fix NAPI registration sequence
Previous releases - regressions:
- ipv6: fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
- mptcp: fix data stream corruption in the address announcement
- bluetooth: fix connection regression between LE and non-LE adapters
- can:
- flexcan: only change CAN state when link up in system PM
- ucan: fix out of bound read in strscpy() source
Previous releases - always broken:
- lwtunnel: fix reentry loops
- ipv6: fix TCP GSO segmentation with NAT
- xfrm: force software GSO only in tunnel mode
- eth: ti: icssg-prueth: add lock to stats
Misc:
- add Andrea Mayer as a maintainer of SRv6"
* tag 'net-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
MAINTAINERS: Add Andrea Mayer as a maintainer of SRv6
Revert "gre: Fix IPv6 link-local address generation."
Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."
net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES
tools headers: Sync uapi/asm-generic/socket.h with the kernel sources
mptcp: Fix data stream corruption in the address announcement
selftests: net: test for lwtunnel dst ref loops
net: ipv6: ioam6: fix lwtunnel_output() loop
net: lwtunnel: fix recursion loops
net: ti: icssg-prueth: Add lock to stats
net: atm: fix use after free in lec_send()
xsk: fix an integer overflow in xp_create_and_assign_umem()
net: stmmac: dwc-qos-eth: use devm_kzalloc() for AXI data
selftests: drv-net: use defer in the ping test
phy: fix xa_alloc_cyclic() error handling
dpll: fix xa_alloc_cyclic() error handling
devlink: fix xa_alloc_cyclic() error handling
ipv6: Set errno after ip_fib_metrics_init() in ip6_route_info_create().
ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
net: ipv6: fix TCP GSO segmentation with NAT
...
|
|
devices."
This reverts commit 6f50175ccad4278ed3a9394c00b797b75441bd6e.
Commit 183185a18ff9 ("gre: Fix IPv6 link-local address generation.") is
going to be reverted. So let's revert the corresponding kselftest
first.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/259a9e98f7f1be7ce02b53d0b4afb7c18a8ff747.1742418408.git.gnault@redhat.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This also fixes a wrong definitions for SCM_TS_OPT_ID & SO_RCVPRIORITY.
Accidentally found while working on another patchset.
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Fixes: a89568e9be75 ("selftests: txtimestamp: add SCM_TS_OPT_ID test")
Fixes: e45469e594b2 ("sock: Introduce SO_RCVPRIORITY socket option")
Link: https://lore.kernel.org/netdev/20250314195257.34854-1-kuniyu@amazon.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250314214155.16046-1-aleksandr.mikhalitsyn@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As recently specified by commit 0ea09cbf8350 ("docs: netdev: add a note
on selftest posting") in net-next, the selftest is therefore shipped in
this series. However, this selftest does not really test this series. It
needs this series to avoid crashing the kernel. What it really tests,
thanks to kmemleak, is what was fixed by the following commits:
- commit c71a192976de ("net: ipv6: fix dst refleaks in rpl, seg6 and
ioam6 lwtunnels")
- commit 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and
ioam6 lwtunnels")
- commit c64a0727f9b1 ("net: ipv6: fix dst ref loop on input in seg6
lwt")
- commit 13e55fbaec17 ("net: ipv6: fix dst ref loop on input in rpl
lwt")
- commit 0e7633d7b95b ("net: ipv6: fix dst ref loop in ila lwtunnel")
- commit 5da15a9c11c1 ("net: ipv6: fix missing dst ref drop in ila
lwtunnel")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-4-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make sure the test cleans up after itself. The XDP off statements
at the end of the test may not be reached.
Fixes: 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312131040.660386-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"15 hotfixes. 7 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
13 are for MM and the other two are for squashfs and procfs.
All are singletons. Please see the individual changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page_alloc: fix memory accept before watermarks gets initialized
mm: decline to manipulate the refcount on a slab page
memcg: drain obj stock on cpu hotplug teardown
mm/huge_memory: drop beyond-EOF folios with the right number of refs
selftests/mm: run_vmtests.sh: fix half_ufd_size_MB calculation
mm: fix error handling in __filemap_get_folio() with FGP_NOWAIT
mm: memcontrol: fix swap counter leak from offline cgroup
mm/vma: do not register private-anon mappings with khugepaged during mmap
squashfs: fix invalid pointer dereference in squashfs_cache_delete
mm/migrate: fix shmem xarray update during migration
mm/hugetlb: fix surplus pages in dissolve_free_huge_page()
mm/damon/core: initialize damos->walk_completed in damon_new_scheme()
mm/damon: respect core layer filters' allowance decision on ops layer
filemap: move prefaulting out of hot write path
proc: fix UAF in proc_get_inode()
|
|
Recent Ubuntu enforces 3-argument open() with O_CREAT:
CC /home/mingo/tip/tools/objtool/builtin-check.o
In file included from /usr/include/fcntl.h:341,
from builtin-check.c:9:
In function ‘open’,
inlined from ‘copy_file’ at builtin-check.c:201:11:
/usr/include/x86_64-linux-gnu/bits/fcntl2.h:52:11: error: call to ‘__open_missing_mode’ declared with attribute error: open with O_CREAT or O_TMPFILE in second argument needs 3 arguments
52 | __open_missing_mode ();
| ^~~~~~~~~~~~~~~~~~~~~~
Use 0400 as the most restrictive mode for the new file.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
|
|
Recreating objtool errors can be a manual process. Kbuild removes the
object, so it has to be compiled or linked again before running objtool.
Then the objtool args need to be reversed engineered.
Make that all easier by automatically making a backup of the object file
on error, and print a modified version of the args which can be used to
recreate.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/7571e30636359b3e173ce6e122419452bb31882f.1741975349.git.jpoimboe@kernel.org
|
|
This is similar to GCC's behavior and makes it more obvious why the
build failed.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/56f0565b15b4b4caa9a08953fa9c679dfa973514.1741975349.git.jpoimboe@kernel.org
|
|
Any objtool warning has the potential of reflecting (or triggering) a
major bug in the kernel or compiler which could result in crashing the
kernel or breaking the livepatch consistency model.
In preparation for failing the build on objtool errors/warnings, add a
new --Werror option.
[ jpoimboe: commit log, comments, error out on fatal errors too ]
Co-developed-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/e423ea4ec297f510a108aa6c78b52b9fe30fa8c1.1741975349.git.jpoimboe@kernel.org
|
|
Add option to allow writing the changed binary to a separate file rather
than changing it in place.
Libelf makes this suprisingly hard, so take the easy way out and just
copy the file before editing it.
Also steal the -o short option from --orc. Nobody will notice ;-)
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/0da308d42d82b3bbed16a31a72d6bde52afcd6bd.1741975349.git.jpoimboe@kernel.org
|
|
Force the user to fix their cmdline if they forget the '--link' option.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/8380bbf3a0fa86e03fd63f60568ae06a48146bc1.1741975349.git.jpoimboe@kernel.org
|
|
The option validations are a bit scattered, consolidate them.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/8f886502fda1d15f39d7351b70d4ebe5903da627.1741975349.git.jpoimboe@kernel.org
|
|
With unret validation enabled and IBT/LTO disabled, objtool runs on TUs
with --rethunk and on vmlinux.o with --unret. So this dependency isn't
valid as they don't always run on the same object.
This error never triggered before because --unret is always coupled with
--noinstr, so the first conditional in opts_valid() returns early due to
opts.noinstr being true.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/c6f5635784a28ed4b10ac4307b1858e015e6eff0.1741975349.git.jpoimboe@kernel.org
|
|
Increase the per-function WARN_FUNC() rate limit from 1 to 2. If the
number of warnings for a given function goes beyond 2, print "skipping
duplicate warning(s)". This helps root out additional warnings in a
function that might be hiding behind the first one.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/aec318d66c037a51c9f376d6fb0e8ff32812a037.1741975349.git.jpoimboe@kernel.org
|
|
Fix some outdated information in the objtool doc.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/2552ee8b48631127bf269359647a7389edf5f002.1741975349.git.jpoimboe@kernel.org
|
|
Clarify what needs to be done to resolve the missing __noreturn warning.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/ab835a35d00bacf8aff0b56257df93f14fdd8224.1741975349.git.jpoimboe@kernel.org
|
|
Make sure all fatal errors are funneled through the 'out' label with a
negative ret.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/0f49d6a27a080b4012e84e6df1e23097f44cc082.1741975349.git.jpoimboe@kernel.org
|
|
The CONFIG_X86_ESPFIX64 version of exc_double_fault() can return to its
caller, but the !CONFIG_X86_ESPFIX64 version never does. In the latter
case the compiler and/or objtool may consider it to be implicitly
noreturn.
However, due to the currently inflexible way objtool detects noreturns,
a function's noreturn status needs to be consistent across configs.
The current workaround for this issue is to suppress unreachable
warnings for exc_double_fault()'s callers. Unfortunately that can
result in ORC coverage gaps and potentially worse issues like inert
static calls and silently disabled CPU mitigations.
Instead, prevent exc_double_fault() from ever being implicitly marked
noreturn by forcing a return behind a never-taken conditional.
Until a more integrated noreturn detection method exists, this is likely
the least objectionable workaround.
Fixes: 55eeab2a8a11 ("objtool: Ignore exc_double_fault() __noreturn warnings")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/d1f4026f8dc35d0de6cc61f2684e0cb6484009d1.1741975349.git.jpoimboe@kernel.org
|
|
We noticed that uffd-stress test was always failing to run when invoked
for the hugetlb profiles on x86_64 systems with a processor count of 64 or
bigger:
...
# ------------------------------------
# running ./uffd-stress hugetlb 128 32
# ------------------------------------
# ERROR: invalid MiB (errno=9, @uffd-stress.c:459)
...
# [FAIL]
not ok 3 uffd-stress hugetlb 128 32 # exit=1
...
The problem boils down to how run_vmtests.sh (mis)calculates the size of
the region it feeds to uffd-stress. The latter expects to see an amount
of MiB while the former is just giving out the number of free hugepages
halved down. This measurement discrepancy ends up violating uffd-stress'
assertion on number of hugetlb pages allocated per CPU, causing it to bail
out with the error above.
This commit fixes that issue by adjusting run_vmtests.sh's
half_ufd_size_MB calculation so it properly renders the region size in
MiB, as expected, while maintaining all of its original constraints in
place.
Link: https://lkml.kernel.org/r/20250218192251.53243-1-aquini@redhat.com
Fixes: 2e47a445d7b3 ("selftests/mm: run_vmtests.sh: fix hugetlb mem size calculation")
Signed-off-by: Rafael Aquini <raquini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, bluetooth and wireless.
No known regressions outstanding.
Current release - regressions:
- wifi: nl80211: fix assoc link handling
- eth: lan78xx: sanitize return values of register read/write
functions
Current release - new code bugs:
- ethtool: tsinfo: fix dump command
- bluetooth: btusb: configure altsetting for HCI_USER_CHANNEL
- eth: mlx5: DR, use the right action structs for STEv3
Previous releases - regressions:
- netfilter: nf_tables: make destruction work queue pernet
- gre: fix IPv6 link-local address generation.
- wifi: iwlwifi: fix TSO preparation
- bluetooth: revert "bluetooth: hci_core: fix sleeping function
called from invalid context"
- ovs: revert "openvswitch: switch to per-action label counting in
conntrack"
- eth:
- ice: fix switchdev slow-path in LAG
- bonding: fix incorrect MAC address setting to receive NS
messages
Previous releases - always broken:
- core: prevent TX of unreadable skbs
- sched: prevent creation of classes with TC_H_ROOT
- netfilter: nft_exthdr: fix offset with ipv4_find_option()
- wifi: cfg80211: cancel wiphy_work before freeing wiphy
- mctp: copy headers if cloned
- phy: nxp-c45-tja11xx: add errata for TJA112XA/B
- eth:
- bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}
- mlx5: bridge, fix the crash caused by LAG state check"
* tag 'net-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
net: mana: cleanup mana struct after debugfs_remove()
net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices
net/mlx5: Bridge, fix the crash caused by LAG state check
net/mlx5: Lag, Check shared fdb before creating MultiPort E-Switch
net/mlx5: Fix incorrect IRQ pool usage when releasing IRQs
net/mlx5: HWS, Rightsize bwc matcher priority
net/mlx5: DR, use the right action structs for STEv3
Revert "openvswitch: switch to per-action label counting in conntrack"
net: openvswitch: remove misbehaving actions length check
selftests: Add IPv6 link-local address generation tests for GRE devices.
gre: Fix IPv6 link-local address generation.
netfilter: nft_exthdr: fix offset with ipv4_find_option()
selftests/tc-testing: Add a test case for DRR class with TC_H_ROOT
net_sched: Prevent creation of classes with TC_H_ROOT
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
selftests: netfilter: skip br_netfilter queue tests if kernel is tainted
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
wifi: mac80211: fix MPDU length parsing for EHT 5/6 GHz
qlcnic: fix memory leak issues in qlcnic_sriov_common.c
rtase: Fix improper release of ring list entries in rtase_sw_reset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Missing initialization of cpu and jiffies32 fields in conncount,
from Kohei Enju.
2) Skip several tests in case kernel is tainted, otherwise tests bogusly
report failure too as they also check for tainted kernel,
from Florian Westphal.
3) Fix a hyphothetical integer overflow in do_ip_vs_get_ctl() leading
to bogus error logs, from Dan Carpenter.
4) Fix incorrect offset in ipv4 option match in nft_exthdr, from
Alexey Kashavkin.
netfilter pull request 25-03-13
* tag 'nf-25-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_exthdr: fix offset with ipv4_find_option()
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
selftests: netfilter: skip br_netfilter queue tests if kernel is tainted
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
====================
Link: https://patch.msgid.link/20250313095636.2186-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
GRE devices have their special code for IPv6 link-local address
generation that has been the source of several regressions in the past.
Add selftest to check that all gre, ip6gre, gretap and ip6gretap get an
IPv6 link-link local address in accordance with the
net.ipv6.conf.<dev>.addr_gen_mode sysctl.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/2d6772af8e1da9016b2180ec3f8d9ee99f470c77.1741375285.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The objtool program need to analysis the control flow of each object file
generated by compiler toolchain, it needs to know all the locations that
a branch instruction may jump into, if a jump table is used, objtool has
to correlate the jump instruction with the table.
On x86 (which is the only port supported by objtool before LoongArch),
there is a relocation type on the jump instruction and directly points
to the table. But on LoongArch, the relocation is on another kind of
instruction prior to the jump instruction, and also with scheduling it
is not very easy to tell the offset of that instruction from the jump
instruction. Furthermore, because LoongArch has -fsection-anchors (often
enabled at -O1 or above) the relocation may actually points to a section
anchor instead of the table itself.
For the jump table of switch cases, a GCC patch "LoongArch: Add support
to annotate tablejump" and a Clang patch "[LoongArch] Add options for
annotate tablejump" have been merged into the upstream mainline, it can
parse the additional section ".discard.tablejump_annotate" which stores
the jump info as pairs of addresses, each pair contains the address of
jump instruction and the address of jump table.
For the jump table of computed gotos, it is indeed not easy to implement
in the compiler, especially if there is more than one computed goto in a
function such as ___bpf_prog_run(). objdump kernel/bpf/core.o shows that
there are many table jump instructions in ___bpf_prog_run(), but there are
no relocations on the table jump instructions and to the table directly on
LoongArch.
Without the help of compiler, in order to figure out the address of goto
table for the special case of ___bpf_prog_run(), since the instruction
sequence is relatively single and stable, it makes sense to add a helper
find_reloc_of_rodata_c_jump_table() to find the relocation which points
to the section ".rodata..c_jump_table".
If find_reloc_by_table_annotate() failed, it means there is no relocation
info of switch table address in ".rela.discard.tablejump_annotate", then
objtool may find the relocation info of goto table ".rodata..c_jump_table"
with find_reloc_of_rodata_c_jump_table().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-6-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The objtool program need to analysis the control flow of each object file
generated by compiler toolchain, it needs to know all the locations that
a branch instruction may jump into, if a jump table is used, objtool has
to correlate the jump instruction with the table.
On x86 (which is the only port supported by objtool before LoongArch),
there is a relocation type on the jump instruction and directly points
to the table. But on LoongArch, the relocation is on another kind of
instruction prior to the jump instruction, and also with scheduling it
is not very easy to tell the offset of that instruction from the jump
instruction. Furthermore, because LoongArch has -fsection-anchors (often
enabled at -O1 or above) the relocation may actually points to a section
anchor instead of the table itself.
The good news is that after continuous analysis and discussion, at last
a GCC patch "LoongArch: Add support to annotate tablejump" and a Clang
patch "[LoongArch] Add options for annotate tablejump" have been merged
into the upstream mainline, the compiler changes make life much easier
for switch table support of objtool on LoongArch.
By now, there is an additional section ".discard.tablejump_annotate" to
store the jump info as pairs of addresses, each pair contains the address
of jump instruction and the address of jump table.
In order to find switch table, it is easy to parse the relocation section
".rela.discard.tablejump_annotate" to get table_sec and table_offset, the
rest process is somehow like x86.
Additionally, it needs to get each table size. When compiling on LoongArch,
there are unsorted table offsets of rodata if there exist many jump tables,
it will get the wrong table end and find the wrong table jump destination
instructions in add_jump_table().
Sort the rodata table offset by parsing ".rela.discard.tablejump_annotate"
and then get each table size of rodata corresponded with each table jump
instruction, it is used to check the table end and will break the process
when parsing ".rela.rodata" to avoid getting the wrong jump destination
instructions.
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=0ee028f55640
Link: https://github.com/llvm/llvm-project/commit/4c2c17756739
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-5-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
For the most part, an absolute relocation type is used for rodata.
In the case of STT_SECTION, reloc->sym->offset is always zero, for
the other symbol types, reloc_addend(reloc) is always zero, thus it
can use a simple statement "reloc->sym->offset + reloc_addend(reloc)"
to obtain the symbol offset for various symbol types.
When compiling on LoongArch, there exist PC relative relocation types
for rodata, it needs to calculate the symbol offset with "S + A - PC"
according to the spec of "ELF for the LoongArch Architecture".
If there is only one jump table in the rodata, the "PC" is the entry
address which is equal with the value of reloc_offset(reloc), at this
time, reloc_offset(table) is 0.
If there are many jump tables in the rodata, the "PC" is the offset
of the jump table's base address which is equal with the value of
reloc_offset(reloc) - reloc_offset(table).
So for LoongArch, if the relocation type is PC relative, it can use a
statement "reloc_offset(reloc) - reloc_offset(table)" to get the "PC"
value when calculating the symbol offset with "S + A - PC" for one or
many jump tables in the rodata.
Add an arch-specific function arch_jump_table_sym_offset() to assign
the symbol offset, for the most part that is an absolute relocation,
the default value is "reloc->sym->offset + reloc_addend(reloc)" in
the weak definition, it can be overridden by each architecture that
has different requirements.
Link: https://github.com/loongson/la-abi-specs/blob/release/laelf.adoc
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-4-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In the most cases, the entry size of rodata is 8 bytes because the
relocation type is 64 bit. There are also 32 bit relocation types,
the entry size of rodata should be 4 bytes in this case.
Add an arch-specific function arch_reloc_size() to assign the entry
size of rodata for x86, powerpc and LoongArch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-3-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In the relocation section ".rela.rodata" of each .o file compiled with
LoongArch toolchain, there are various symbol types such as STT_NOTYPE,
STT_OBJECT, STT_FUNC in addition to the usual STT_SECTION, it needs to
use reloc symbol offset instead of reloc addend to find the destination
instruction in find_jump_table() and add_jump_table().
For the most part, an absolute relocation type is used for rodata. In the
case of STT_SECTION, reloc->sym->offset is always zero, and for the other
symbol types, reloc_addend(reloc) is always zero, thus it can use a simple
statement "reloc->sym->offset + reloc_addend(reloc)" to obtain the symbol
offset for various symbol types.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-2-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The check for using old libelf prints an error message when libelf.h is
not available but does not abort. This may confuse so hide the compiler
error message.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Link: https://lore.kernel.org/r/20250203073610.206000-1-david.engraf@sysgo.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Integrate the reproduer from Mingi to TDC.
All test results:
1..4
ok 1 0385 - Create DRR with default setting
ok 2 2375 - Delete DRR with handle
ok 3 3092 - Show DRR class
ok 4 4009 - Reject creation of DRR class with classid TC_H_ROOT
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306232355.93864-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These scripts fail if the kernel is tainted which leads to wrong test
failure reports in CI environments when an unrelated test triggers some
splat.
Check taint state at start of script and SKIP if its already dodgy.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The correct mac address for NS target 2001:db8::254 is 33:33:ff:00:02:54,
not 33:33:00:00:02:54. The same with client maddress.
Fixes: 86fb6173d11e ("selftests: bonding: add ns multicast group testing")
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306023923.38777-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ping.py has 3 cases, test_v4, test_v6 and test_tcp.
But these cases are not executed on the XDP environment.
So, it adds XDP environment, existing tests(test_v4, test_v6, and
test_tcp) are executed too on the below XDP environment.
So, it adds XDP cases.
1. xdp-generic + single-buffer
2. xdp-generic + multi-buffer
3. xdp-native + single-buffer
4. xdp-native + multi-buffer
5. xdp-offload
It also makes test_{v4 | v6 | tcp} sending large size packets. this may
help to check whether multi-buffer is working or not.
Note that the physical interface may be down and then up when xdp is
attached or detached.
This takes some period to activate traffic. So sleep(10) is
added if the test interface is the physical interface.
netdevsim and veth type interfaces skip sleep.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250309134219.91670-9-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
|
|
into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390
by introducing a dedicated GNU hash bucket pointer with correct
32-bit entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ftrace: Fix return address recovery of traced function
selftests/vDSO: Fix GNU hash table entry size for s390x
s390/traps: Fix test_monitor_call() inline assembly
|
|
with min/max boundaries
damon_nr_regions.py starts DAMON, periodically collect number of regions
in snapshots, and see if it is in the requested range. The check code
assumes the numbers are sorted on the collection list, but there is no
such guarantee. Hence this can result in false positive test success.
Sort the list before doing the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-4-sj@kernel.org
Fixes: 781497347d1b ("selftests/damon: implement test for min/max_nr_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
100ms
damon_nr_regions.py updates max_nr_regions to a number smaller than
expected number of real regions and confirms DAMON respect the harsh
limit. To give time for DAMON to make changes for the regions, 3
aggregation intervals (300 milliseconds) are given.
The internal mechanism works with not only the max_nr_regions, but also
sz_limit, though. It avoids merging region if that casn make region of
size larger than sz_limit. In the test, sz_limit is set too small to
achive the new max_nr_regions, unless it is updated for the new
min_nr_regions. But the update is done only once per operations set
update interval, which is one second by default.
Hence, the test randomly incurs false positive failures. Fix it by
setting the ops interval same to aggregation interval, to make sure
sz_limit is updated by the time of the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-3-sj@kernel.org
Fixes: 8bf890c81612 ("selftests/damon/damon_nr_regions: test online-tuned max_nr_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: three fixes for false results".
Fix three DAMON selftest bugs that cause two and one false positive
failures and successes.
This patch (of 3):
damos_quota.py assumes the quota will always exceeded. But whether quota
will be exceeded or not depend on the monitoring results. Actually the
monitored workload has chaning access pattern and hence sometimes the
quota may not really be exceeded. As a result, false positive test
failures happen. Expect how much time the quota will be exceeded by
checking the monitoring results, and use it instead of the naive
assumption.
Link: https://lkml.kernel.org/r/20250225222333.505646-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250225222333.505646-2-sj@kernel.org
Fixes: 51f58c9da14b ("selftests/damon: add a test for DAMOS quota")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
further reduced
damos_quota_goal.py selftest see if DAMOS quota goals tuning feature
increases or reduces the effective size quota for given score as expected.
The tuning feature sets the minimum quota size as one byte, so if the
effective size quota is already one, we cannot expect it further be
reduced. However the test is not aware of the edge case, and fails since
it shown no expected change of the effective quota. Handle the case by
updating the failure logic for no change to see if it was the case, and
simply skips to next test input.
Link: https://lkml.kernel.org/r/20250217182304.45215-1-sj@kernel.org
Fixes: f1c07c0a1662 ("selftests/damon: add a test for DAMOS quota goal")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171423.b28a918d-lkp@intel.com
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org> [6.10.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit a5c6bc590094a1a73cf6fa3f505e1945d2bf2461.
The general approach described in commit e076eaca5906 ("selftests: break
the dependency upon local header files") was taken one step too far here:
it should not have been extended to include the syscall numbers. This is
because doing so would require per-arch support in tools/include/uapi, and
no such support exists.
This revert fixes two separate reports of test failures, from Dave
Hansen[1], and Li Wang[2]. An excerpt of Dave's report:
Before this commit (a5c6bc590094a1a73cf6fa3f505e1945d2bf2461) things are
fine. But after, I get:
running PKEY tests for unsupported CPU/OS
An excerpt of Li's report:
I just found that mlock2_() return a wrong value in mlock2-test
[1] https://lore.kernel.org/dc585017-6740-4cab-a536-b12b37a7582d@intel.com
[2] https://lore.kernel.org/CAEemH2eW=UMu9+turT2jRie7+6ewUazXmA6kL+VBo3cGDGU6RA@mail.gmail.com
Link: https://lkml.kernel.org/r/20250214033850.235171-1-jhubbard@nvidia.com
Fixes: a5c6bc590094 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Li Wang <liwang@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 14be4e6f3522 ("selftests: vDSO: fix ELF hash table entry size for s390x")
changed the type of the ELF hash table entries to 64bit on s390x.
However the *GNU* hash tables entries are always 32bit.
The "bucket" pointer is shared between both hash algorithms.
On s390, this caused the GNU hash algorithm to access its 32-bit entries as if they
were 64-bit, triggering compiler warnings (assignment between "Elf64_Xword *" and
"Elf64_Word *") and runtime crashes.
Introduce a new dedicated "gnu_bucket" pointer which is used by the GNU hash.
Fixes: e0746bde6f82 ("selftests/vDSO: support DT_GNU_HASH")
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250217-selftests-vdso-s390-gnu-hash-v2-1-f6c2532ffe2a@linutronix.de
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Print out the index of mismatching XSAVE bytes using unsigned decimal
format. Some versions of clang complain about trying to print an integer
as an unsigned char.
x86/sev_smoke_test.c:55:51: error: format specifies type 'unsigned char'
but the argument has type 'int' [-Werror,-Wformat]
Fixes: 8c53183dbaa2 ("selftests: kvm: add test for transferring FPU state into VMSA")
Link: https://lore.kernel.org/r/20250228233852.3855676-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
During the initial mprotect(RO) stage of mmu_stress_test, keep vCPUs
spinning until all vCPUs have hit -EFAULT, i.e. until all vCPUs have tried
to write to a read-only page. If a vCPU manages to complete an entire
iteration of the loop without hitting a read-only page, *and* the vCPU
observes mprotect_ro_done before starting a second iteration, then the
vCPU will prematurely fall through to GUEST_SYNC(3) (on x86 and arm64) and
get out of sequence.
Replace the "do-while (!r)" loop around the associated _vcpu_run() with
a single invocation, as barring a KVM bug, the vCPU is guaranteed to hit
-EFAULT, and retrying on success is super confusion, hides KVM bugs, and
complicates this fix. The do-while loop was semi-unintentionally added
specifically to fudge around a KVM x86 bug, and said bug is unhittable
without modifying the test to force x86 down the !(x86||arm64) path.
On x86, if forced emulation is enabled, vcpu_arch_put_guest() may trigger
emulation of the store to memory. Due a (very, very) longstanding bug in
KVM x86's emulator, emulate writes to guest memory that fail during
__kvm_write_guest_page() unconditionally return KVM_EXIT_MMIO. While that
is desirable in the !memslot case, it's wrong in this case as the failure
happens due to __copy_to_user() hitting a read-only page, not an emulated
MMIO region.
But as above, x86 only uses vcpu_arch_put_guest() if the __x86_64__ guards
are clobbered to force x86 down the common path, and of course the
unexpected MMIO is a KVM bug, i.e. *should* cause a test failure.
Fixes: b6c304aec648 ("KVM: selftests: Verify KVM correctly handles mprotect(PROT_READ)")
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Closes: https://lore.kernel.org/all/20250208105318.16861-1-yan.y.zhao@intel.com
Debugged-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250228230804.3845860-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix an objtool false positive, and objtool related build warnings that
happens on PIE-enabled architectures such as LoongArch"
* tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
objtool: Fix C jump table annotations for Clang
vmlinux.lds: Ensure that const vars with relocations are mapped R/O
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
|
|
Add an L1 (guest) assert to the nested exceptions test to verify that KVM
doesn't put VMRUN in an STI shadow (AMD CPUs bleed the shadow into the
guest's int_state if a #VMEXIT occurs before VMRUN fully completes).
Add a similar assert to the VMX side as well, because why not.
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com
Fixes: e85c5e9792b9 ("selftests/ftrace: Update fprobe test to check enabled_functions file")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
