summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-11-27perf tests lib: Add perf_has_symbol.shAdrian Hunter
Some shell tests depend on finding symbols for perf itself, and fail if perf has been stripped and no debug object is available. Add helper functions to check if perf has a needed symbol. This is preparation for amending the tests themselves to be skipped if a needed symbol is not found. The functions make use of the "Symbols" test which reads and checks symbols from a dso, perf itself by default. Note the "Symbols" test will find symbols using the same method as other perf tests, including, for example, looking in the buildid cache. An alternative would be to prevent the needed symbols from being stripped, which seems to work with gcc's externally_visible attribute, but that attribute is not supported by clang. Another alternative would be to use option -Wl,-E (which is already used when perf is built with perl support) which causes the linker to add all (global) symbols to the dynamic symbol table. Then the required symbols need only be made global in scope to avoid being strippable. However that goes beyond what is needed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231123075848.9652-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf header: Fix segfault on build_mem_topology() error pathAdrian Hunter
Do not increase the node count unless a node has been successfully read, because it can lead to a segfault if an error occurs. For example, if perf exceeds the open file limit in memory_node__read(), which, on a test system, could be made to happen by setting the file limit to exactly 32: Before: $ ulimit -n 32 $ perf mem record --all-user -- sleep 1 [ perf record: Woken up 1 times to write data ] failed: can't open memory sysfs data perf: Segmentation fault Obtained 14 stack frames. perf(sighandler_dump_stack+0x48) [0x55f4b1f59558] /lib/x86_64-linux-gnu/libc.so.6(+0x42520) [0x7f4ba1c42520] /lib/x86_64-linux-gnu/libc.so.6(free+0x1e) [0x7f4ba1ca53fe] perf(+0x178ff4) [0x55f4b1f48ff4] perf(+0x179a70) [0x55f4b1f49a70] perf(+0x17ef5d) [0x55f4b1f4ef5d] perf(+0x85c0b) [0x55f4b1e55c0b] perf(cmd_record+0xe1d) [0x55f4b1e5920d] perf(cmd_mem+0xc96) [0x55f4b1e80e56] perf(+0x130460) [0x55f4b1f00460] perf(main+0x689) [0x55f4b1e427d9] /lib/x86_64-linux-gnu/libc.so.6(+0x29d90) [0x7f4ba1c29d90] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x80) [0x7f4ba1c29e40] perf(_start+0x25) [0x55f4b1e42a25] Segmentation fault (core dumped) $ After: $ ulimit -n 32 $ perf mem record --all-user -- sleep 1 [ perf record: Woken up 1 times to write data ] failed: can't open memory sysfs data [ perf record: Captured and wrote 0.005 MB perf.data (11 samples) ] $ Fixes: f8e502b9d1b3b197 ("perf header: Ensure bitmaps are freed") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231123075848.9652-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf report: Remove warning on missing raw data for s390Thomas Richter
Command # ./perf report -i /tmp/111 -D > /dev/null emits an error message when a sample for event CRYPTO_ALL in the perf.data file does not contain any raw data. This is ok. Do not trigger this warning when the sample in the perf.data files does not contain any raw data at all. Check for availability of raw data for all events and return if none is available. Output before: # ./perf report -i /tmp/111 -D > /dev/null Invalid CRYPTO_ALL raw data encountered Invalid CRYPTO_ALL raw data encountered Invalid CRYPTO_ALL raw data encountered # Output after: # ./perf report -i /tmp/111 -D > /dev/null # Fixes: b539deafbadb2fc6 ("perf report: Add s390 raw data interpretation for PAI counters") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/r/20231122092703.3163191-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27ndtest: fix typo class_regster -> class_registerYi Zhang
Fixes: dd6cad2dcb58 ("testing: nvdimm: make struct class structures constant") Signed-off-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20231127040026.362729-1-yi.zhang@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-27ALSA: pcm: Introduce MSBITS subformat interfaceJaroslav Kysela
Improve granularity of format selection for S32/U32 formats by adding constants representing 20, 24 and MAX most significant bits. The MAX means the maximum number of significant bits which can the physical format hold. For 32-bit formats, MAX is related to 32 bits. For 8-bit formats, MAX is related to 8 bits etc. As there is only one user currently (format S32_LE), subformat is represented by a simple u32 and stores flags only for that one user alone. The approach of subformat being part of struct snd_pcm_hardware is a compromise between ALSA and ASoC allowing for hw_params-intersection code to be alloc/free-less while not adding any new responsibilities to ASoC runtime structures. Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Co-developed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20231117120610.1755254-2-cezary.rojewski@intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-11-27KVM: selftests: arm64: Support P52V48 4K and 16K guest_modesRyan Roberts
Add support for VM_MODE_P52V48_4K and VM_MODE_P52V48_16K guest modes by using the FEAT_LPA2 pte format for stage1, when FEAT_LPA2 is available. Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231127111737.1897081-13-ryan.roberts@arm.com
2023-11-27KVM: selftests: arm64: Determine max ipa size per-page sizeRyan Roberts
We are about to add 52 bit PA guest modes for 4K and 16K pages when the system supports LPA2. In preparation beef up the logic that parses mmfr0 to also tell us what the maximum supported PA size is for each page size. Max PA size = 0 implies the page size is not supported at all. Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231127111737.1897081-12-ryan.roberts@arm.com
2023-11-27perf tools: Add perf binary dependent rule for shellcheck log in Makefile.perfAthira Rajeev
Add rule in new Makefile "tests/Makefile.tests" for running shellcheck on shell test scripts. This automates below shellcheck into the build. $ for F in $(find tests/shell/ -perm -o=x -name '*.sh'); do shellcheck -S warning $F; done Condition for shellcheck is added in Makefile.perf to avoid build breakage in the absence of shellcheck binary. Update Makefile.perf to contain new rule for "SHELLCHECK_TEST" which is for making shellcheck test as a dependency on perf binary. Added "tests/Makefile.tests" to run shellcheck on shellscripts in tests/shell. The make rule "SHLLCHECK_RUN" ensures that, every time during make, shellcheck will be run only on modified files during subsequent invocations. By this, if any newly added shell scripts or fixes in existing scripts breaks coding/formatting style, it will get captured during the perf build. Example build failure by modifying probe_vfs_getname.sh in tests/shell: In tests/shell/probe_vfs_getname.sh line 8: . $(dirname $0)/lib/probe.sh ^-----------^ SC2046 (warning): Quote this to prevent word splitting. For more information: https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt... make[3]: *** [/root/athira/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.probe_vfs_getname.sh.shellcheck_log] Error 1 make[2]: *** [Makefile.perf:686: SHELLCHECK_TEST] Error 2 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [Makefile.perf:244: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 Here, like other files which gets created during compilation (ex: .builtin-bench.o.cmd or .perf.o.cmd ), create .shellcheck_log also as a hidden file. Example: tests/shell/.probe_vfs_getname.sh.shellcheck_log shellcheck is re-run if any of the script gets modified based on its dependency of this log file. After this, for testing, changed "tests/shell/trace+probe_vfs_getname.sh" to break shellcheck format. In the next make run, it is also captured: In tests/shell/probe_vfs_getname.sh line 8: . $(dirname $0)/lib/probe.sh ^-----------^ SC2046 (warning): Quote this to prevent word splitting. For more information: https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt... make[3]: *** [/root/athira/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.probe_vfs_getname.sh.shellcheck_log] Error 1 make[3]: *** Waiting for unfinished jobs.... In tests/shell/trace+probe_vfs_getname.sh line 14: . $(dirname $0)/lib/probe.sh ^-----------^ SC2046 (warning): Quote this to prevent word splitting. For more information: https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt... make[3]: *** [/root/athira/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.trace+probe_vfs_getname.sh.shellcheck_log] Error 1 make[2]: *** [Makefile.perf:686: SHELLCHECK_TEST] Error 2 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [Makefile.perf:244: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 Failure log can be found in the stdout of make itself. This is reported at build time. To be able to go ahead with the build or disable shellcheck even though it is known that some test is broken, add a "NO_SHELLCHECK" option. Example: make NO_SHELLCHECK=1 INSTALL libsubcmd_headers INSTALL libsymbol_headers INSTALL libapi_headers INSTALL libperf_headers INSTALL libbpf_headers LINK perf Note: This is tested on RHEL and also SLES. Use below check: "$(shell which shellcheck 2> /dev/null)" to look for presence of shellcheck binary. The approach "shell command -v" is not used here. In some of the distros(RHEL), command is available as executable file (/usr/bin/command). But in some distros(SLES), it is a shell builtin and not available as executable file. Committer testing: $ type shellcheck shellcheck is hashed (/usr/bin/shellcheck) $ rpm -qf /usr/bin/shellcheck ShellCheck-0.9.0-2.fc38.x86_64 $ $ alias m $ git diff diff --git a/tools/perf/tests/shell/probe_vfs_getname.sh b/tools/perf/tests/shell/probe_vfs_getname.sh index 554e12e83c55fd56..dbc14634678e2bf6 100755 --- a/tools/perf/tests/shell/probe_vfs_getname.sh +++ b/tools/perf/tests/shell/probe_vfs_getname.sh @@ -5,7 +5,7 @@ # Arnaldo Carvalho de Melo <acme@kernel.org>, 2017 # shellcheck source=lib/probe.sh -. "$(dirname $0)"/lib/probe.sh +. $(dirname $0)/lib/probe.sh skip_if_no_perf_probe || exit 2 alias m='rm -rf ~/libexec/perf-core/ ; make -k CORESIGHT=1 O=/tmp/build/$(basename $PWD) -C tools/perf install-bin && perf test python' $ m make: Entering directory '/home/acme/git/perf-tools-next/tools/perf' BUILD: Doing 'make -j32' parallel build <SNIP> INSTALL libbpf_headers In tests/shell/probe_vfs_getname.sh line 8: . $(dirname $0)/lib/probe.sh ^-----------^ SC2046 (warning): Quote this to prevent word splitting. For more information: https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt... make[3]: *** [/home/acme/git/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.probe_vfs_getname.sh.shellcheck_log] Error 1 make[2]: *** [Makefile.perf:686: SHELLCHECK_TEST] Error 2 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [Makefile.perf:244: sub-make] Error 2 make: *** [Makefile:113: install-bin] Error 2 make: Leaving directory '/home/acme/git/perf-tools-next/tools/perf' $ Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20231123160232.94253-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf vendor events riscv: Add StarFive Dubhe-90 JSON fileJi Sheng Teoh
Similar to StarFive's Dubhe-80, Dubhe-90 supports raw event id 0x00 - 0x22. Reuse Dubhe-80 firmware and common json file. The raw events are enabled through PMU node of DT binding. Besides raw event, add standard RISC-V firmware events to support monitoring of firmware event. Example of PMU DT node: pmu { compatible = "riscv,pmu"; riscv,raw-event-to-mhpmcounters = /* Event ID 1-31 */ <0x00 0x00 0xFFFFFFFF 0xFFFFFFE0 0x00007FF8>, /* Event ID 32-33 */ <0x00 0x20 0xFFFFFFFF 0xFFFFFFFE 0x00007FF8>, /* Event ID 34 */ <0x00 0x22 0xFFFFFFFF 0xFFFFFF22 0x00007FF8>; }; 'perf stat' output: [root@user]# perf stat -a \ -e access_mmu_stlb \ -e miss_mmu_stlb \ -e access_mmu_pte_c \ -e rob_flush \ -e btb_prediction_miss \ -e itlb_miss \ -e sync_del_fetch_g \ -e icache_miss \ -e bpu_br_retire \ -e bpu_br_miss \ -e ret_ins_retire \ -e ret_ins_miss \ -- openssl speed rsa2048 Doing 2048 bits private rsa's for 10s: 39 2048 bits private RSA's in 10.03s Doing 2048 bits public rsa's for 10s: 1469 2048 bits public RSA's in 9.47s version: 3.0.10 built on: Tue Aug 1 13:47:24 2023 UTC options: bn(64,64) CPUINFO: N/A sign verify sign/s verify/s rsa 2048 bits 0.257179s 0.006447s 3.9 155.1 Performance counter stats for 'system wide': 3112882 access_mmu_stlb 10550 miss_mmu_stlb 18251 access_mmu_pte_c 274765 rob_flush 22470560 btb_prediction_miss 3035839 itlb_miss 643549060 sync_del_fetch_g 133013 icache_miss 62982796 bpu_br_retire 287548 bpu_br_miss 8935910 ret_ins_retire 8308 ret_ins_miss 20.656182600 seconds time elapsed Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com> Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nikita Shubin <n.shubin@yadro.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-riscv@lists.infradead.org Link: https://lore.kernel.org/r/20231122030908.2981502-1-jisheng.teoh@starfivetech.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf tests coresight: Remove unused variableszhujun2
These variables are never referenced in the code, just remove them. Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20231115064255.11057-1-zhujun2@cmss.chinamobile.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27bpf: Fix a few selftest failures due to llvm18 changeYonghong Song
With latest upstream llvm18, the following test cases failed: $ ./test_progs -j #13/2 bpf_cookie/multi_kprobe_link_api:FAIL #13/3 bpf_cookie/multi_kprobe_attach_api:FAIL #13 bpf_cookie:FAIL #77 fentry_fexit:FAIL #78/1 fentry_test/fentry:FAIL #78 fentry_test:FAIL #82/1 fexit_test/fexit:FAIL #82 fexit_test:FAIL #112/1 kprobe_multi_test/skel_api:FAIL #112/2 kprobe_multi_test/link_api_addrs:FAIL [...] #112 kprobe_multi_test:FAIL #356/17 test_global_funcs/global_func17:FAIL #356 test_global_funcs:FAIL Further analysis shows llvm upstream patch [1] is responsible for the above failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c, without [1], the asm code is: 0000000000000400 <bpf_fentry_test7>: 400: f3 0f 1e fa endbr64 404: e8 00 00 00 00 callq 0x409 <bpf_fentry_test7+0x9> 409: 48 89 f8 movq %rdi, %rax 40c: c3 retq 40d: 0f 1f 00 nopl (%rax) ... and with [1], the asm code is: 0000000000005d20 <bpf_fentry_test7.specialized.1>: 5d20: e8 00 00 00 00 callq 0x5d25 <bpf_fentry_test7.specialized.1+0x5> 5d25: c3 retq ... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7> and this caused test failures for #13/#77 etc. except #356. For test case #356/17, with [1] (progs/test_global_func17.c)), the main prog looks like: 0000000000000000 <global_func17>: 0: b4 00 00 00 2a 00 00 00 w0 = 0x2a 1: 95 00 00 00 00 00 00 00 exit ... which passed verification while the test itself expects a verification failure. Let us add 'barrier_var' style asm code in both places to prevent function specialization which caused selftests failure. [1] https://github.com/llvm/llvm-project/pull/72903 Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231127050342.1945270-1-yonghong.song@linux.dev
2023-11-27perf lock: Fix a memory leak on an error pathzhaimingbing
if a strdup-ed string is NULL,the allocated memory needs freeing. Signed-off-by: zhaimingbing <zhaimingbing@cmss.chinamobile.com> Acked-by: Ingo Molnar <mingo@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20231124092657.10392-1-zhaimingbing@cmss.chinamobile.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf parse-events: Make legacy events lower priority than sysfs/JSONIan Rogers
The perf tool has previously made legacy events the priority so with or without a PMU the legacy event would be opened: $ perf stat -e cpu-cycles,cpu/cpu-cycles/ true Using CPUID GenuineIntel-6-8D-1 intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch Attempting to add event pmu 'cpu' with 'cpu-cycles,' that may result in non-fatal errors After aliases, add event pmu 'cpu' with 'cpu-cycles,' that may result in non-fatal errors Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) size 136 config 0 (PERF_COUNT_HW_CPU_CYCLES) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 enable_on_exec 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid 833967 cpu -1 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) size 136 config 0 (PERF_COUNT_HW_CPU_CYCLES) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 enable_on_exec 1 exclude_guest 1 ------------------------------------------------------------ ... Fixes to make hybrid/BIG.little PMUs behave correctly, ie as core PMUs capable of opening legacy events on each, removing hard coded "cpu_core" and "cpu_atom" Intel PMU names, etc. caused a behavioral difference on Apple/ARM due to latent issues in the PMU driver reported in: https://lore.kernel.org/lkml/08f1f185-e259-4014-9ca4-6411d5c1bc65@marcan.st/ As part of that report Mark Rutland <mark.rutland@arm.com> requested that legacy events not be higher in priority when a PMU is specified reversing what has until this change been perf's default behavior. With this change the above becomes: $ perf stat -e cpu-cycles,cpu/cpu-cycles/ true Using CPUID GenuineIntel-6-8D-1 Attempt to add: cpu/cpu-cycles=0/ ..after resolving event: cpu/event=0x3c/ Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) size 136 config 0 (PERF_COUNT_HW_CPU_CYCLES) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 enable_on_exec 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid 827628 cpu -1 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ perf_event_attr: type 4 (PERF_TYPE_RAW) size 136 config 0x3c sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 enable_on_exec 1 exclude_guest 1 ------------------------------------------------------------ ... So the second event has become a raw event as /sys/devices/cpu/events/cpu-cycles exists. A fix was necessary to config_term_pmu in parse-events.c as check_alias expansion needs to happen after config_term_pmu, and config_term_pmu may need calling a second time because of this. config_term_pmu is updated to not use the legacy event when the PMU has such a named event (either from JSON or sysfs). The bulk of this change is updating all of the parse-events test expectations so that if a sysfs/JSON event exists for a PMU the test doesn't fail - a further sign, if it were needed, that the legacy event priority was a known and tested behavior of the perf tool. Reported-by: Hector Martin <marcan@marcan.st> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Hector Martin <marcan@marcan.st> Tested-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231123042922.834425-1-irogers@google.com [ Initialize the 'alias_rewrote_terms' variable to false to address a clang warning ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf cs-etm: Enable itrace option 'T'Leo Yan
Prior to Armv8.4, the feature FEAT_TRF is not supported by Arm CPUs. Consequently, the sysfs node 'ts_source' will not be set as 1 by the CoreSight ETM driver. On the other hand, the perf tool relies on the 'ts_source' node to determine whether the kernel timestamp is traced. Since the 'ts_source' is not set for Arm CPUs prior to Armv8.4, platforms in this case cannot utilize the traced timestamp as the kernel time. This patch enables the 'T' itrace option, which forcibly utilizes the traced timestamp as the kernel time. If users are aware that their working platform's Arm CoreSight shares the same counter with the kernel time, they can specify 'T' option to decode the traced timestamp as the kernel time. An usage example is: # perf record -e cs_etm// -- test_program # perf script --itrace=i10ibT # perf report --itrace=i10ibT Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20231014074513.1668000-3-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf auxtrace: Add 'T' itrace option for timestamp traceLeo Yan
An AUX trace can contain timestamp, but in some situations, the hardware trace module (e.g. Arm CoreSight) cannot decide the traced timestamp is the same source with CPU's time, thus the decoder can not use the timestamp trace for samples. This patch introduces 'T' itrace option. If users know the platforms they are working on have the same time counter with CPUs, users can use this new option to tell a decoder for using timestamp trace as kernel time. Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20231014074513.1668000-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf cs-etm: Bump minimum OpenCSD version to ensure a bugfix is presentJames Clark
Since commit d927ef5004ef ("perf cs-etm: Add exception level consistency check"), the exception that was added to Perf will be triggered unless the following bugfix from OpenCSD is present: - _Version 1.2.1_: - __Bugfix__: ETM4x / ETE - output of context elements to client can in some circumstances be delayed until after subsequent atoms have been processed leading to incorrect memory decode access via the client callbacks. Fixed to flush context elements immediately they are committed. Rather than remove the assert and silently fail, just increase the minimum version requirement to avoid hard to debug issues and regressions. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: James Clark <james.clark@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230901133716.677499-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf test: Basic branch counter supportKan Liang
Add a basic test for the branch counter feature. The test verifies that - The new filter can be successfully applied on the supported platforms. - The counter value can be outputted via the perf report -D Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tinghao Zhang <tinghao.zhang@intel.com> Link: https://lore.kernel.org/r/20231107184020.1497571-1-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf script perl: Fail check on dynamic allocationzhaimingbing
Return ENOMEM when dynamic allocation failed. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: zhaimingbing <zhaimingbing@cmss.chinamobile.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20231120112356.8652-1-zhaimingbing@cmss.chinamobile.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf script python: Fail check on dynamic allocationParan Lee
Add PyList_New() Fail check in get_field_numeric_entry() function and dynamic allocation checking for set_regs_in_dict(), python_start_script(). Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: MichelleJin <shjy180909@gmail.com> Signed-off-by: Paran Lee <p4ranlee@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Austin Kim <austindh.kim@gmail.com> Cc: Honggyu Kim <honggyu.kp@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20231120223218.9036-1-p4ranlee@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-27perf test: Remove atomics from test_loop to avoid test failuresNick Forrington
The current use of atomics can lead to test failures, as tests (such as tests/shell/record.sh) search for samples with "test_loop" as the top-most stack frame, but find frames related to the atomic operation (e.g. __aarch64_ldadd4_relax). This change simply removes the "count" variable, as it is not necessary. Fixes: 1962ab6f6e0b39e4 ("perf test workload thloop: Make count increments atomic") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Nick Forrington <nick.forrington@arm.com> Acked-by: Leo Yan <leo.yan@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231102162225.50028-1-nick.forrington@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-26Merge tag 'parisc-for-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "This patchset fixes and enforces correct section alignments for the ex_table, altinstructions, parisc_unwind, jump_table and bug_table which are created by inline assembly. Due to not being correctly aligned at link & load time they can trigger unnecessarily the kernel unaligned exception handler at runtime. While at it, I switched the bug table to use relative addresses which reduces the size of the table by half on 64-bit. We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs from HP-UX, which now trigger build-issues with glibc. We can simply remove them. Most of the patches are tagged for stable kernel series. Summary: - Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc build issues - Fix section alignments for ex_table, altinstructions, parisc unwind table, jump_table and bug_table - Reduce size of bug_table on 64-bit kernel by using relative pointers" * tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Reduce size of the bug_table on 64-bit kernel by half parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes parisc: Use natural CPU alignment for bug_table parisc: Ensure 32-bit alignment on parisc unwind section parisc: Mark lock_aligned variables 16-byte aligned on SMP parisc: Mark jump_table naturally aligned parisc: Mark altinstructions read-only and 32-bit aligned parisc: Mark ex_table entries 32-bit aligned in uaccess.h parisc: Mark ex_table entries 32-bit aligned in assembly.h
2023-11-25Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix "rodata=on" not disabling "rodata=full" on arm64 - Add arm64 make dependency between vmlinuz.efi and Image, leading to occasional build failures previously (with parallel building) - Add newline to the output formatting of the za-fork kselftest * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: add dependency between vmlinuz.efi and Image kselftest/arm64: Fix output formatting for za-fork arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
2023-11-25parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codesHelge Deller
Those return codes are only defined for the parisc architecture and are leftovers from when we wanted to be HP-UX compatible. They are not returned by any Linux kernel syscall but do trigger problems with the glibc strerrorname_np() and strerror() functions as reported in glibc issue #31080. There is no need to keep them, so simply remove them. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: Bruno Haible <bruno@clisp.org> Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080 Cc: stable@vger.kernel.org
2023-11-24Merge tag 'pm-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a syntax error in the sleepgraph utility which causes it to exit early on every invocation (David Woodhouse)" * tag 'pm-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: tools: Fix sleepgraph syntax error
2023-11-24tools: ynl-gen: use enum name from the specJakub Kicinski
The enum name used for id-to-str table does not handle the enum-name override in the spec correctly. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24tools: ynl-get: use family c-nameJakub Kicinski
If a new family is ever added with a dash in the name the C codegen will break. Make sure we use the "safe" form of the name consistently. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24tools: ynl-gen: always append ULL/LL to range typesJakub Kicinski
32bit builds generate the following warning when we use a u32-max in range validation: warning: decimal constant 4294967295 is between LONG_MAX and ULONG_MAX. For C99 that means long long, C90 compilers are very likely to produce unsigned long (and a warning) here The range values are u64, slap ULL/LL on all of them just to avoid such noise. There's currently no code using full range validation, but it will matter in the upcoming page-pool introspection. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24selftests/bpf: Add lazy global subprog validation testsAndrii Nakryiko
Add a few test that validate BPF verifier's lazy approach to validating global subprogs. We check that global subprogs that are called transitively through another global subprog is validated. We also check that invalid global subprog is not validated, if it's not called from the main program. And we also check that main program is always validated first, before any of the subprogs. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231124035937.403208-4-andrii@kernel.org
2023-11-24bpf: Validate global subprogs lazilyAndrii Nakryiko
Slightly change BPF verifier logic around eagerness and order of global subprog validation. Instead of going over every global subprog eagerly and validating it before main (entry) BPF program is verified, turn it around. Validate main program first, mark subprogs that were called from main program for later verification, but otherwise assume it is valid. Afterwards, go over marked global subprogs and validate those, potentially marking some more global functions as being called. Continue this process until all (transitively) callable global subprogs are validated. It's a BFS traversal at its heart and will always converge. This is an important change because it allows to feature-gate some subprograms that might not be verifiable on some older kernel, depending on supported set of features. E.g., at some point, global functions were allowed to accept a pointer to memory, which size is identified by user-provided type. Unfortunately, older kernels don't support this feature. With BPF CO-RE approach, the natural way would be to still compile BPF object file once and guard calls to this global subprog with some CO-RE check or using .rodata variables. That's what people do to guard usage of new helpers or kfuncs, and any other new BPF-side feature that might be missing on old kernels. That's currently impossible to do with global subprogs, unfortunately, because they are eagerly and unconditionally validated. This patch set aims to change this, so that in the future when global funcs gain new features, those can be guarded using BPF CO-RE techniques in the same fashion as any other new kernel feature. Two selftests had to be adjusted in sync with these changes. test_global_func12 relied on eager global subprog validation failing before main program failure is detected (unknown return value). Fix by making sure that main program is always valid. verifier_subprog_precision's parent_stack_slot_precise subtest relied on verifier checkpointing heuristic to do a checkpoint at instruction #5, but that's no longer true because we don't have enough jumps validated before reaching insn #5 due to global subprogs being validated later. Other than that, no changes, as one would expect. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231124035937.403208-3-andrii@kernel.org
2023-11-24Documentation: Document each netlink familyBreno Leitao
This is a simple script that parses the Netlink YAML spec files (Documentation/netlink/specs/), and generates RST files to be rendered in the Network -> Netlink Specification documentation page. Create a python script that is invoked during 'make htmldocs', reads the YAML specs input file and generate the correspondent RST file. Create a new Documentation/networking/netlink_spec index page, and reference each Netlink RST file that was processed above in this main index.rst file. In case of any exception during the parsing, dump the error and skip the file. Do not regenerate the RST files if the input files (YAML) were not changed in-between invocations. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> ---- Changelog: V3: * Do not regenerate the RST files if the input files were not changed. In order to do it, a few things changed: - Rely on Makefile more to find what changed, and trigger individual file processing - The script parses file by file now (instead of batches) - Create a new option to generate the index file V2: * Moved the logic from a sphinx extension to a external script * Adjust some formatting as suggested by Donald Hunter and Jakub * Auto generating all the rsts instead of having stubs * Handling error gracefully Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-23libbpf: Start v1.4 development cycleEduard Zingerman
Bump libbpf.map to v1.4.0 to start a new libbpf version cycle. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231123000439.12025-1-eddyz87@gmail.com
2023-11-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/ice/ice_main.c c9663f79cd82 ("ice: adjust switchdev rebuild path") 7758017911a4 ("ice: restore timestamp configuration after device reset") https://lore.kernel.org/all/20231121211259.3348630-1-anthony.l.nguyen@intel.com/ Adjacent changes: kernel/bpf/verifier.c bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations") 5f99f312bd3b ("bpf: add register bounds sanity checks and sanitization") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23Merge tag 'net-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" - kselftest: rtnetlink: fix ip route command typo Current release - new code bugs: - s390/ism: make sure ism driver implies smc protocol in kconfig - two build fixes for tools/net Previous releases - regressions: - rxrpc: couple of ACK/PING/RTT handling fixes Previous releases - always broken: - bpf: verify bpf_loop() callbacks as if they are called unknown number of times - improve stability of auto-bonding with Hyper-V - account BPF-neigh-redirected traffic in interface statistics Misc: - net: fill in some more MODULE_DESCRIPTION()s" * tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) tools: ynl: fix duplicate op name in devlink tools: ynl: fix header path for nfsd net: ipa: fix one GSI register field width tls: fix NULL deref on tls_sw_splice_eof() with empty record net: axienet: Fix check for partial TX checksum vsock/test: fix SEQPACKET message bounds test i40e: Fix adding unsupported cloud filters ice: restore timestamp configuration after device reset ice: unify logic for programming PFINT_TSYN_MSK ice: remove ptp_tx ring parameter flag amd-xgbe: propagate the correct speed and duplex status amd-xgbe: handle the corner-case during tx completion amd-xgbe: handle corner-case during sfp hotplug net: veth: fix ethtool stats reporting octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF net: usb: qmi_wwan: claim interface 4 for ZTE MF290 Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" net/smc: avoid data corruption caused by decline nfc: virtual_ncidev: Add variable to check if ndev is running dpll: Fix potential msg memleak when genlmsg_put_reply failed ...
2023-11-23tools: ynl: fix duplicate op name in devlinkJakub Kicinski
We don't support CRUD-inspired message types in YNL too well. One aspect that currently trips us up is the fact that single message ID can be used in multiple commands (as the response). This leads to duplicate entries in the id-to-string tables: devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init] 19 | [DEVLINK_CMD_PORT_NEW] = "port-new", | ^~~~~~~~~~ devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’) Fixes tag points at where the code was generated, the "real" problem is that the code generator does not support CRUD. Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23tools: ynl: fix header path for nfsdJakub Kicinski
The makefile dependency is trying to include the wrong header: <command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory The guard also looks wrong. Fixes: f14122b2c2ac ("tools: ynl: Add source files for nfsd netlink protocol") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23vsock/test: fix SEQPACKET message bounds testArseniy Krasnov
Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23kselftest/arm64: Fix output formatting for za-forkMark Brown
The za-fork test does not output a newline when reporting the result of the one test it runs, causing the counts printed by kselftest to be included in the test name. Add the newline. Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h") Cc: <stable@vger.kernel.org> # 6.4.x Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-11-23perf tools: Address python 3.6 DeprecationWarning for string scapesBenjamin Gray
Python 3.6 introduced a DeprecationWarning for invalid escape sequences. This is upgraded to a SyntaxWarning in Python 3.12, and will eventually be a syntax error. Fix these now to get ahead of it before it's an error. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mykola Lysenko <mykolal@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Todd E Brandt <todd.e.brandt@linux.intel.com> Cc: Tom Rix <trix@redhat.com> Cc: linux-doc@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/20230912060801.95533-6-bgray@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-23rcutorture: Add mid-sized stall to TREE07Paul E. McKenney
There is code in rcu_implicit_dynticks_qs() that checks for the current grace period being halfway to the RCU CPU stall timeout, but rcutorture currently does not test this code. This commit therefore adds a 14-second stall to the TREE07 scenario in order to test this code given the default RCU CPU stall warning timeout of 21 seconds. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
2023-11-23rcutorture: add nolibc init support for mips, ppc and rv64Thomas Weißschuh
Use nolibc for all support architectures. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
2023-11-22tools: Disable __packed attribute compiler warning due to -Werror=attributesArnaldo Carvalho de Melo
Noticed on several perf tools cross build test containers: [perfbuilder@five ~]$ grep FAIL ~/dm.log/summary 19 10.18 debian:experimental-x-mips : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 20 11.21 debian:experimental-x-mips64 : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 21 11.30 debian:experimental-x-mipsel : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 37 12.07 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 42 11.91 ubuntu:18.04-x-riscv64 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) 44 13.17 ubuntu:18.04-x-sh4 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) 45 12.09 ubuntu:18.04-x-sparc64 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) [perfbuilder@five ~]$ In file included from util/intel-pt-decoder/intel-pt-pkt-decoder.c:10: /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h: In function 'get_unaligned_le16': /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h:13:29: error: packed attribute causes inefficient alignment for 'x' [-Werror=attributes] 13 | const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr); \ | ^ /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h:27:28: note: in expansion of macro '__get_unaligned_t' 27 | return le16_to_cpu(__get_unaligned_t(__le16, p)); | ^~~~~~~~~~~~~~~~~ This comes from the kernel, where the -Wattributes and -Wpacked isn't used, -Wpacked is already disabled, do it for the attributes as well. Fixes: a91c987254651443 ("perf tools: Add get_unaligned_leNN()") Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/7c5b626c-1de9-4c12-a781-e44985b4a797@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-22perf build: Ensure sysreg-defs Makefile respects output dirOliver Upton
Currently the sysreg-defs are written out to the source tree unconditionally, ignoring the specified output directory. Correct the build rule to emit the header to the output directory. Opportunistically reorganize the rules to avoid interleaving with the set of beauty make rules. Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20231121192956.919380-3-oliver.upton@linux.dev Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-22tools perf: Add arm64 sysreg files to MANIFESTOliver Upton
Ian pointed out that source tarballs are incomplete as of commit e2bdd172e665 ("perf build: Generate arm64's sysreg-defs.h and add to include path"), since the source files needed from the kernel tree do not appear in the manifest. Add them. Reported-by: Ian Rogers <irogers@google.com> Fixes: e2bdd172e665 ("perf build: Generate arm64's sysreg-defs.h and add to include path") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20231121192956.919380-2-oliver.upton@linux.dev Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-22tools/perf: Update tools's copy of mips syscall tableNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-14-namhyung@kernel.org
2023-11-22tools/perf: Update tools's copy of s390 syscall tableNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-13-namhyung@kernel.org
2023-11-22tools/perf: Update tools's copy of powerpc syscall tableNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-12-namhyung@kernel.org
2023-11-22tools/perf: Update tools's copy of x86 syscall tableNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-11-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of s390/asm headersNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-10-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of arm64/asm headersNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-9-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of x86/asm headersNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-8-namhyung@kernel.org
generated by cgit (git 2.34.1) at 2025-09-13 04:40:28 +0000