| Age | Commit message (Collapse) | Author |
|---|
|
Let's add various THP variants that we'll run with our existing test
cases.
Link: https://lkml.kernel.org/r/20220927110120.106906-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We'll reuse it in the anon_cow test next.
Link: https://lkml.kernel.org/r/20220927110120.106906-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/vm: test COW handling of anonymous memory".
This is my current set of tests for testing COW handling of anonymous
memory, especially when interacting with GUP. I developed these tests
while working on PageAnonExclusive and managed to clean them up just now.
On current upstream Linux, all tests pass except the hugetlb tests that
rely on vmsplice -- these tests should pass as soon as vmsplice properly
uses FOLL_PIN instead of FOLL_GET.
I'm working on additional tests for COW handling in private mappings,
focusing on long-term R/O pinning e.g., of the shared zeropage, pagecache
pages and KSM pages. These tests, however, will go into a different file.
So this is everything I have regarding tests for anonymous memory.
This patch (of 7):
Let's start adding tests for our COW handling of anonymous memory. We'll
focus on basic tests that we can achieve without additional libraries or
gup_test extensions.
We'll add THP and hugetlb tests separately.
[david@redhat.com: s/size_t/ssize_t/ on `cur', `total', `transferred';]
Link: https://lkml.kernel.org/r/51302b9e-dc69-d709-3214-f23868028555@redhat.com
Link: https://lkml.kernel.org/r/20220927110120.106906-1-david@redhat.com
Link: https://lkml.kernel.org/r/20220927110120.106906-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After converting all the three relevant testcases (uffd, madvise, mremap)
to use memfd, no test will need the hugetlb mount point anymore. Drop the
code.
Link: https://lkml.kernel.org/r/20221014144015.94039-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For dropping the hugetlb mountpoint in run_vmtests.sh. Cleaned it up a
little bit around the changed codes.
Link: https://lkml.kernel.org/r/20221014144013.94027-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For dropping the hugetlb mountpoint in run_vmtests.sh. Since no parameter
is needed, drop USAGE too.
Link: https://lkml.kernel.org/r/20221014143921.93887-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/vm: Drop hugetlb mntpoint in run_vmtests.sh", v2.
Clean the code up so we can use the same memfd for both hugetlb and shmem
which is cleaner.
This patch (of 4):
We already used memfd for shmem test, move it forward with hugetlb too so
that we don't need user to specify the hugetlb file path explicitly when
running hugetlb shared tests.
Link: https://lkml.kernel.org/r/20221014143921.93887-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221014143921.93887-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DWARF version 5 standard Sec 2.14 says that
Any debugging information entry representing the declaration of an object,
module, subprogram or type may have DW_AT_decl_file, DW_AT_decl_line and
DW_AT_decl_column attributes, each of whose value is an unsigned integer
constant.
So it should be an unsigned integer data. Also, even though the standard
doesn't clearly say the DW_AT_call_file is signed or unsigned, the
elfutils (eu-readelf) interprets it as unsigned integer data and it is
natural to handle it as unsigned integer data as same as DW_AT_decl_file.
This changes the DW_AT_call_file as unsigned integer data too.
Fixes: 3f4460a28fb2f73d ("perf probe: Filter out redundant inline-instances")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166761727445.480106.3738447577082071942.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Along the development cycle, the testing code support for module/in-kernel
compiles was removed. Restore this functionality by moving any internal
API tests to the userspace side, as well as threading tests. Fix the
lockdep issues and add a way to reduce memory usage so the tests can
complete with KASAN + memleak detection. Make the tests work on 32 bit
hosts where possible and detect 32 bit hosts in the radix test suite.
[akpm@linux-foundation.org: fix module export]
[akpm@linux-foundation.org: fix it some more]
[liam.howlett@oracle.com: fix compile warnings on 32bit build in check_find()]
Link: https://lkml.kernel.org/r/20221107203816.1260327-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20221028180415.3074673-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 3af1dfdd51e06697 ("perf build: Move perf_dlfilters.h in the
source tree") moved perf_dlfilters.h to the include/perf/ directory
while include/perf is ignored because it has 'perf' in the name. Newly
created files in the include/perf/ directory will be ignored.
Testing:
Before:
$ touch tools/perf/include/perf/junk
$ git status | grep junk
$ git check-ignore -v tools/perf/include/perf/junk
tools/perf/.gitignore:6:perf tools/perf/include/perf/junk
After:
$ git status | grep junk
tools/perf/include/perf/junk
$ git check-ignore -v tools/perf/include/perf/junk
Add !include/perf/ to perf's .gitignore file.
Fixes: 3af1dfdd51e06697 ("perf build: Move perf_dlfilters.h in the source tree")
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221103092704.173391-1-dolinux.peng@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit f4a2aade6809c657 ("perf tests powerpc: Fix branch stack sampling
test to include sanity check for branch filter") added a skip if certain
branch options aren't available.
But the change added both -b (--branch-any) and --branch-filter options
at the same time, which will always result in a failure on any platform
because the arguments can't be used together.
Fix this by removing -b (--branch-any) and leaving --branch-filter which
already specifies 'any'. Also add warning messages to the test and perf
tool.
Output on x86 before this fix:
$ sudo ./perf test branch
108: Check branch stack sampling : Skip
After:
$ sudo ./perf test branch
108: Check branch stack sampling : Ok
Fixes: f4a2aade6809c657 ("perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman.Khandual@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221028121913.745307-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf stat' with CSV output option prints an extra empty string as first
field in metrics output line. Sample output below:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,1.78,msec,cpu-clock,1785146,100.00,0.973,CPUs utilized
S0,1,26,,context-switches,1781750,100.00,0.015,M/sec
S0,1,1,,cpu-migrations,1780526,100.00,0.561,K/sec
S0,1,1,,page-faults,1779060,100.00,0.561,K/sec
S0,1,875807,,cycles,1769826,100.00,0.491,GHz
S0,1,85281,,stalled-cycles-frontend,1767512,100.00,9.74,frontend cycles idle
S0,1,576839,,stalled-cycles-backend,1766260,100.00,65.86,backend cycles idle
S0,1,288430,,instructions,1762246,100.00,0.33,insn per cycle
====> ,S0,1,,,,,,,2.00,stalled cycles per insn
The above command line uses field separator as "," via "-x," option and
per-socket option displays socket value as first field. But here the
last line for "stalled cycles per insn" has "," in the beginning.
Sample output using interval mode:
# ./perf stat -I 1000 -x, --per-socket -a -C 1 ls
0.001813453,S0,1,1.87,msec,cpu-clock,1872052,100.00,0.002,CPUs utilized
0.001813453,S0,1,2,,context-switches,1868028,100.00,1.070,K/sec
------
0.001813453,S0,1,85379,,instructions,1856754,100.00,0.32,insn per cycle
====> 0.001813453,,S0,1,,,,,,,1.34,stalled cycles per insn
Above result also has an extra CSV separator after
the timestamp. Patch addresses extra field separator
in the beginning of the metric output line.
The counter stats are displayed by function
"perf_stat__print_shadow_stats" in code
"util/stat-shadow.c". While printing the stats info
for "stalled cycles per insn", function "new_line_csv"
is used as new_line callback.
The new_line_csv function has check for "os->prefix"
and if prefix is not null, it will be printed along
with cvs separator.
Snippet from "new_line_csv":
if (os->prefix)
fprintf(os->fh, "%s%s", os->prefix, config->csv_sep);
Here os->prefix gets printed followed by ","
which is the cvs separator. The os->prefix is
used in interval mode option ( -I ), to print
time stamp on every new line. But prefix is
already set to contain CSV separator when used
in interval mode for CSV option.
Reference: Function "static void print_interval"
Snippet:
sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
Also if prefix is not assigned (if not used with
-I option), it gets set to empty string.
Reference: function printout() in util/stat-display.c
Snippet:
.prefix = prefix ? prefix : "",
Since prefix already set to contain cvs_sep in interval
option, patch removes printing config->csv_sep in
new_line_csv function to avoid printing extra field.
After the patch:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,2.04,msec,cpu-clock,2045202,100.00,1.013,CPUs utilized
S0,1,2,,context-switches,2041444,100.00,979.289,/sec
S0,1,0,,cpu-migrations,2040820,100.00,0.000,/sec
S0,1,2,,page-faults,2040288,100.00,979.289,/sec
S0,1,254589,,cycles,2036066,100.00,0.125,GHz
S0,1,82481,,stalled-cycles-frontend,2032420,100.00,32.40,frontend cycles idle
S0,1,113170,,stalled-cycles-backend,2031722,100.00,44.45,backend cycles idle
S0,1,88766,,instructions,2030942,100.00,0.35,insn per cycle
S0,1,,,,,,,1.27,stalled cycles per insn
Fixes: 92a61f6412d3a09d ("perf stat: Implement CSV metrics output")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-By: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221018085605.63834-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The following command will get segfault due to missing aggr_header_csv
for AGGR_NODE:
$ sudo perf stat -a --per-node -x, --metric-only true
Committer testing:
Before this patch:
# perf stat -a --per-node -x, --metric-only true
Segmentation fault (core dumped)
#
After:
# gdb perf
-bash: gdb: command not found
# perf stat -a --per-node -x, --metric-only true
node,Ghz,frontend cycles idle,backend cycles idle,insn per cycle,branch-misses of all branches,
N0,32,0.335,2.10,0.65,0.69,0.03,1.92,
#
Fixes: 86895b480a2f10c7 ("perf stat: Add --per-node agregation support")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221107213314.3239159-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use ARRAY_SIZE to fix the following coccicheck warnings:
tools/testing/selftests/arm64/mte/check_buffer_fill.c:341:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:35:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:168:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:72:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:369:25-26:
WARNING: Use ARRAY_SIZE
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20221105073143.78521-1-tegongkang@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The signal magic values are supposed to be allocated as somewhat meaningful
ASCII so if we encounter a bad magic value print the any alphanumeric
characters we find in it as well as the hex value to aid debuggability.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221102140543.98193-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When fixing up support for extra_context in the signal handling tests I
didn't notice that there is a TODO file in the directory which lists this
as a thing to be done. Since it's been done remove it from the list.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221027110324.33802-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Especially when the test is configured to run for a longer time it can be
reassuring to users to see that the supervising program is running OK so
provide a message every second when the output timer expires.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221017144553.773176-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently we don't have an explicit check that when it's been a second
since we have seen output produced from the test programs starting up that
means all of them are running and we should start both sending signals and
timing out. This is not reliable, especially on very heavily loaded systems
where the test programs might take longer than a second to run.
We do skip sending signals to children that have not produced output yet
so we won't cause them to exit unexpectedly by sending a signal but this
can create confusion when interpreting output, for example appearing to
show the tests running for less time than expected or appearing to show
missed signal deliveries. Avoid issues by explicitly checking that we have
seen output from all the child processes before we start sending signals
or counting test run time.
This is especially likely on virtual platforms with large numbers of vector
lengths supported since the platforms are slow and there will be a lot of
tasks per CPU.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221017144553.773176-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Two selftests drivers exist under the copyleft-next license.
These drivers were added prior to SPDX practice taking full swing
in the kernel. Now that we have an SPDX tag for copyleft-next-0.3.1
documented, embrace it and remove the boiler plate.
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Kuno Woudt <kuno@frob.nl>
Cc: Richard Fontana <fontana@sharpeleven.org>
Cc: copyleft-next@lists.fedorahosted.org
Cc: Ciaran Farrell <Ciaran.Farrell@suse.com>
Cc: Christopher De Nicolo <Christopher.DeNicolo@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 51aad1a6723b ("ACPICA: Finish support for the CDAT table")
did not add utcksum.o to the acpidump Makefile by mistake.
Do that now.
Fixes: 51aad1a6723b ("ACPICA: Finish support for the CDAT table")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove completed item from TODO list.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/f2263abe45613b28f1583fbf04a4bffcf735bcf6.1667802195.git.remckee0@gmail.com
|
|
Add tests for memblock_alloc_exact_nid_raw() where the simulated physical
memory is set up with multiple NUMA nodes. Additionally, all but one of
these tests set nid != NUMA_NO_NODE. All tests are run for both top-down
and bottom-up allocation directions.
The tested scenarios are:
Range unrestricted:
- region cannot be allocated:
+ there are no previously reserved regions, but requested node is
too small
+ the requested node is fully reserved
+ the requested node is partially reserved and does not have
enough space
+ none of the nodes have enough memory to allocate the region
Range restricted:
- region can be allocated in the specific node requested without
dropping min_addr:
+ the range fully overlaps with the node, and there are adjacent
reserved regions
- region cannot be allocated:
+ range partially overlaps with two different nodes, where the
second node is the requested node
+ range overlaps with multiple nodes along node boundaries, and
the requested node starts after max_addr
+ nid is set to NUMA_NO_NODE and the total range can fit the
region, but the range is split between two nodes and everything
else is reserved
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/51b14da46e6591428df3aefc5acc7dca9341a541.1667802195.git.remckee0@gmail.com
|
|
Add tests for memblock_alloc_exact_nid_raw() where the simulated physical
memory is set up with multiple NUMA nodes. Additionally, all of these
tests set nid != NUMA_NO_NODE. These tests are run with a bottom-up
allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the
first node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and
the requested node ends before min_addr
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/935f0eed5e06fd44dc67d9f49b277923d7896bd3.1667802195.git.remckee0@gmail.com
|
|
Add tests for memblock_alloc_exact_nid_raw() where the simulated physical
memory is set up with multiple NUMA nodes. Additionally, all of these
tests set nid != NUMA_NO_NODE. These tests are run with a top-down
allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the
first node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and
the requested node ends before min_addr
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/2cc0883243d68ddc3faf833d2d9e86f48534c1d7.1667802195.git.remckee0@gmail.com
|
|
Add TEST_F_EXACT flag, which specifies that tests should run
memblock_alloc_exact_nid_raw(). Introduce range tests for
memblock_alloc_exact_nid_raw() by using the TEST_F_EXACT flag to run the
range tests in alloc_nid_api.c, since memblock_alloc_exact_nid_raw() and
memblock_alloc_try_nid_raw() behave the same way when nid = NUMA_NO_NODE.
Rename tests and other functions in alloc_nid_api.c by removing "_try".
Since the test names will be displayed in verbose output, they need to
be general enough to refer to any of the memblock functions that the
tests may run.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5a4b6d1b6130ab7375314e1c45a6d5813dfdabbd.1667802195.git.remckee0@gmail.com
|
|
Variable ret is compared with less than zero even though it was set as u32.
So u32 to int conversion is needed.
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20221105183656.86077-1-tegongkang@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
perf_event_attr' arg
Using BPF for that, doing a cleverish reuse of perf_event_attr__fprintf(),
that really needs to be turned into __snprintf(), etc.
But since the plan is to go the BTF way probably use libbpf's
btf_dump__dump_type_data().
Example:
[root@quaco ~]# perf trace -e ~acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c,perf_event_open --max-events 10 perf stat --quiet sleep 0.001
fg
0.000 perf_event_open(attr_uptr: { type: 1, size: 128, config: 0x1, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
0.067 perf_event_open(attr_uptr: { type: 1, size: 128, config: 0x3, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
0.120 perf_event_open(attr_uptr: { type: 1, size: 128, config: 0x4, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 5
0.172 perf_event_open(attr_uptr: { type: 1, size: 128, config: 0x2, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 7
0.190 perf_event_open(attr_uptr: { size: 128, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 8
0.199 perf_event_open(attr_uptr: { size: 128, config: 0x1, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 9
0.204 perf_event_open(attr_uptr: { size: 128, config: 0x4, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 10
0.210 perf_event_open(attr_uptr: { size: 128, config: 0x5, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 11
[root@quaco ~]#
Suggested-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Y2V2Tpu+2vzJyon2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.
This is mainly fallout from the original implementation of dynamic CXL
region creation (instantiate new physical memory pools) that arrived
in v6.0-rc1.
Given the theme of "failures in the presence of pass-through decoders"
this also includes new regression test infrastructure for that case.
Summary:
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream
of a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases"
* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Recycle region ids
cxl/region: Fix 'distance' calculation with passthrough ports
tools/testing/cxl: Add a single-port host-bridge regression config
tools/testing/cxl: Fix some error exits
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
cxl/region: Fix cxl_region leak, cleanup targets at region delete
cxl/region: Fix region HPA ordering validation
cxl/pmem: Use size_add() against integer overflow
cxl/region: Fix decoder allocation crash
ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
cxl/region: Fix null pointer dereference due to pass through decoder commit
cxl/mbox: Add a check on input payload size
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
"2nd set of IIO fixes for 6.1
Another mixed bag of driver fixes.
* atmel,at91-sama5d2
- Drop a 5 degree offset as not needed for production devices.
- Missing iio_trigger_free() in error path.
* bosch,bma400
- Turn power on before trying to read chip ID.
* bosch,bno055
- Avoid uninitialized variable warning (no actual impact)
* meas,ms5611
- Fix multiple instances of driver sharing single prom array.
- Stop forcing SPI speed to max devices supports
* mps,mp2629
- Wrong structure field used to match channel.
- Missing NULL terminator.
* sysfs-trigger
- Fix memory leak in error path.
* tools
- Fix wrong read size when calling with noevents."
* tag 'iio-fixes-for-6.1b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
tools: iio: iio_generic_buffer: Fix read size
iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()
iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
iio: adc: mp2629: fix potential array out of bound access
iio: adc: mp2629: fix wrong comparison of channel
iio: pressure: ms5611: changed hardcoded SPI speed to value limited
iio: pressure: ms5611: fixed value compensation bug
iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.
iio: adc: at91-sama5d2_adc: get rid of 5 degrees Celsius adjustment
iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()
|
|
Boris (and the robot) reported that objtool grew a new complaint about
unreachable instructions. Upon inspection it was immediately clear
the __weak zombie instructions struck again.
For the unweary, the linker will simply remove the symbol for
overriden __weak symbols but leave the instructions in place, creating
unreachable instructions -- and objtool likes to report these.
Commit 4adb23686795 ("objtool: Ignore extra-symbol code") was supposed
to have dealt with that, but the new commit 9f2899fe36a6 ("objtool:
Add option to generate prefix symbols") subtly broke that logic by
created unvisited symbols.
Fixes: 9f2899fe36a6 ("objtool: Add option to generate prefix symbols")
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
When moving a symbol in the symtab its index changes and any reloc
referring that symtol-table-index will need to be rewritten too.
In order to facilitate this, objtool simply marks the whole reloc
section 'changed' which will cause the whole section to be
re-generated.
However, finding the relocs that use any given symbol is implemented
rather crudely -- a fully iteration of all sections and their relocs.
Given that some builds have over 20k sections (kallsyms etc..)
iterating all that for *each* symbol moved takes a bit of time.
Instead have each symbol keep a list of relocs that reference it.
This *vastly* improves build times for certain configs.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Y2LlRA7x+8UsE1xf@hirez.programming.kicks-ass.net
|
|
Jonathan reports that region creation fails when a single-port
host-bridge connects to a multi-port switch. Mock up that configuration
so a fix can be tested and regression tested going forward.
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752184838.947915.2167957540894293891.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Fix a few typos where 'goto err_port' was used rather than the object
specific cleanup.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752184255.947915.16163477849330181425.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
lld produces "fast" style build-ids by default, which is inconsistent
with ld's "sha1" style. Explicitly specify build-id style to be "sha1"
when linking liburandom_read.so the same way it is already done for
urandom_read.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20221104094016.102049-1-asavkov@redhat.com
|
|
Copy libbpf_strlcpy() from libbpf_internal.h to bpf_util.h, and rename it
to bpf_strlcpy(), then replace selftests strncpy()/libbpf_strlcpy() with
bpf_strlcpy(), fix compile warning.
The libbpf_internal.h header cannot be used directly here, because
references to cgroup_helpers.c in samples/bpf will generate compilation
errors. We also can't add libbpf_strlcpy() directly to bpf_util.h,
because the definition of libbpf_strlcpy() in libbpf_internal.h is
duplicated. In order not to modify the libbpf code, add a new function
bpf_strlcpy() to selftests bpf_util.h.
How to reproduce this compilation warning:
$ make -C samples/bpf
cgroup_helpers.c: In function ‘__enable_controllers’:
cgroup_helpers.c:80:17: warning: ‘strncpy’ specified bound 4097 equals destination size [-Wstringop-truncation]
80 | strncpy(enable, controllers, sizeof(enable));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_469D8AF32BD56816A29981BED06E96D22506@qq.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Fix the test build for some distros"
* tag 'landlock-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Build without static libraries
|
|
A set of test cases to verify enum fwd resolution logic:
- verify that enum fwd can be resolved as full enum64;
- verify that enum64 fwd can be resolved as full enum;
- verify that enum size is considered when enums are compared for
equivalence.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221101235413.1824260-2-eddyz87@gmail.com
|
|
Changes de-duplication logic for enums in the following way:
- update btf_hash_enum to ignore size and kind fields to get
ENUM and ENUM64 types in a same hash bucket;
- update btf_compat_enum to consider enum fwd to be compatible with
full enum64 (and vice versa);
This allows BTF de-duplication in the following case:
// CU #1
enum foo;
struct s {
enum foo *a;
} *x;
// CU #2
enum foo {
x = 0xfffffffff // big enough to force enum64
};
struct s {
enum foo *a;
} *y;
De-duplicated BTF prior to this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
[6] STRUCT 's' size=8 vlen=1
'a' type_id=8 bits_offset=0
[7] ENUM 'foo' encoding=UNSIGNED size=4 vlen=0
[8] PTR '(anon)' type_id=7
[9] PTR '(anon)' type_id=6
De-duplicated BTF after this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
Enum forward declarations in C do not provide information about
enumeration values range. Thus the `btf_type->size` field is
meaningless for forward enum declarations. In fact, GCC does not
encode size in DWARF for forward enum declarations
(but dwarves sets enumeration size to a default value of `sizeof(int) * 8`
when size is not specified see dwarf_loader.c:die__create_new_enumeration).
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221101235413.1824260-1-eddyz87@gmail.com
|
|
test_align selftest relies on BPF verifier log emitting register states
for specific instructions in expected format. Unfortunately, BPF
verifier precision backtracking log interferes with such expectations.
And instruction on which precision propagation happens sometimes don't
output full expected register states. This does indeed look like
something to be improved in BPF verifier, but is beyond the scope of
this patch set.
So to make test_align a bit more robust, inject few dummy R4 = R5
instructions which capture desired state of R5 and won't have precision
tracking logs on them. This fixes tests until we can improve BPF
verifier output in the presence of precision tracking.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As this is where we expect to find bpf/bpf_helpers.h, etc.
This needs more work to make it follow LIBBPF_DYNAMIC=1 usage, i.e. when
not using the system libbpf it should use the headers in the in-kernel
sources libbpf in tools/lib/bpf.
We need to do that anyway to avoid this mixup system libbpf and
in-kernel files, so we'll get this sorted out that way.
And this also may become moot as we move to using BPF skels for this
feature.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
be used instead
The attempt at using BPF to copy syscall pointer arguments to show them
like strace does started with sys_{enter,exit}_SYSCALL_NAME tracepoints,
in tools/perf/examples/bpf/augmented_syscalls.c, but then achieving this
result using raw_syscalls:{enter,exit} and BPF tail calls was deemed
more flexible.
The 'perf trace' codebase was adapted to using it while trying to
continue supporting the old style per-syscall tracepoints, which at some
point became too unwieldly and now isn't working properly.
So lets scale back and concentrate on the augmented_raw_syscalls.c
model on the way to using BPF skeletons.
For the same reason remove the etcsnoop.c example, that used the
old style per-tp syscalls just for the 'open' and 'openat' syscalls,
looking at the pathnames starting with "/etc/", we should be able
to do this later using filters, after we move to BPF skels.
The augmented_raw_syscalls.c one continues to work, now with libbpf 1.0,
after Ian work on using the libbpf map style:
# perf trace -e ~acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c,open* --max-events 4
0.000 ping/194815 openat(dfd: CWD, filename: "/etc/hosts", flags: RDONLY|CLOEXEC) = 5
20.225 systemd-oomd/972 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12
20.285 abrt-dump-jour/1371 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 21
20.301 abrt-dump-jour/1370 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 21
#
This is using this:
# cat ~/.perfconfig
[trace]
show_zeros = yes
show_duration = no
no_inherit = yes
args_alignment = 40
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Example code has migrated to use standard BPF header files, remove
unnecessary perf equivalents. Update install step to not try to copy
these.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221103045437.163510-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Avoid use of tools/perf/include/bpf/bpf.h and use the more regular BPF
headers.
Committer testing:
# perf trace -e ~acme/git/perf/tools/perf/examples/bpf/5sec.c sleep 5
0.000 perf_bpf_probe:hrtimer_nanosleep(__probe_ip: -1474734416, rqtp: 5000000000)
# perf trace -e ~acme/git/perf/tools/perf/examples/bpf/5sec.c/max-stack=7/ sleep 5
0.000 perf_bpf_probe:hrtimer_nanosleep(__probe_ip: -1474734416, rqtp: 5000000000)
hrtimer_nanosleep ([kernel.kallsyms])
common_nsleep ([kernel.kallsyms])
__x64_sys_clock_nanosleep ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__GI___clock_nanosleep (/usr/lib64/libc.so.6)
[0] ([unknown])
#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221103045437.163510-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Avoid use of tools/perf/include/bpf/bpf.h and use the more regular BPF
headers. Add raw_syscalls:sys_enter to avoid the evlist being empty.
Committer testing:
# time perf trace -e ~acme/git/perf/tools/perf/examples/bpf/empty.c sleep 5
real 0m5.697s
user 0m0.217s
sys 0m0.453s
#
I.e. it sets up everything successfully (use -v to see the details) and
filters out all syscalls, then exits when the workload (sleep 5)
finishes.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221103045437.163510-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Don't use deprecated and now broken map style. Avoid use of
tools/perf/include/bpf/bpf.h and use the more regular BPF headers.
Switch to raw_syscalls:sys_enter to avoid the evlist being empty and
fixing generating output.
Committer testing:
# perf trace -e ~acme/git/perf/tools/perf/examples/bpf/hello.c --call-graph=dwarf --max-events 5
0.000 perf/206852 __bpf_stdout__(Hello, world)
syscall_trace_enter.constprop.0 ([kernel.kallsyms])
syscall_trace_enter.constprop.0 ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__GI___sched_setaffinity_new (/usr/lib64/libc.so.6)
8.561 pipewire/2290 __bpf_stdout__(Hello, world)
syscall_trace_enter.constprop.0 ([kernel.kallsyms])
syscall_trace_enter.constprop.0 ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__libc_read (/usr/lib64/libc.so.6)
8.571 pipewire/2290 __bpf_stdout__(Hello, world)
syscall_trace_enter.constprop.0 ([kernel.kallsyms])
syscall_trace_enter.constprop.0 ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__GI___ioctl (/usr/lib64/libc.so.6)
8.586 pipewire/2290 __bpf_stdout__(Hello, world)
syscall_trace_enter.constprop.0 ([kernel.kallsyms])
syscall_trace_enter.constprop.0 ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__GI___write (/usr/lib64/libc.so.6)
8.592 pipewire/2290 __bpf_stdout__(Hello, world)
syscall_trace_enter.constprop.0 ([kernel.kallsyms])
syscall_trace_enter.constprop.0 ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__timerfd_settime (/usr/lib64/libc.so.6)
#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221103045437.163510-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Don't use deprecated and now broken map style. Avoid use of
tools/perf/include/bpf/bpf.h and use the more regular BPF headers.
Committer notes:
Add /usr/include to the include path so that bpf/bpf_helpers.h can be
found, remove sys/socket.h, adding the sockaddr_storage definition, also
remove stdbool.h, both were preventing building the
augmented_raw_syscalls.c file with clang, revisit later.
Testing it:
Asking for syscalls that have string arguments:
# perf trace -e ~acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c,string --max-events 10
0.000 thermald/1144 openat(dfd: CWD, filename: "/sys/class/powercap/intel-rapl/intel-rapl:0/intel-rapl:0:2/energy_uj", flags: RDONLY) = 13
0.158 thermald/1144 openat(dfd: CWD, filename: "/sys/class/powercap/intel-rapl/intel-rapl:0/energy_uj", flags: RDONLY) = 13
0.215 thermald/1144 openat(dfd: CWD, filename: "/sys/class/thermal/thermal_zone3/temp", flags: RDONLY) = 13
16.448 cgroupify/36478 openat(dfd: 4, filename: ".", flags: RDONLY|CLOEXEC|DIRECTORY|NONBLOCK) = 5
16.468 cgroupify/36478 newfstatat(dfd: 5, filename: "", statbuf: 0x7fffca5b4130, flag: 4096) = 0
16.473 systemd-oomd/972 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12
16.499 systemd-oomd/972 newfstatat(dfd: 12, filename: "", statbuf: 0x7ffd2bc73cc0, flag: 4096) = 0
16.516 abrt-dump-jour/1370 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 21
16.538 abrt-dump-jour/1370 newfstatat(dfd: 21, filename: "", statbuf: 0x7ffc651b8980, flag: 4096) = 0
16.540 abrt-dump-jour/1371 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 21
#
Networking syscalls:
# perf trace -e ~acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c,sendto*,connect* --max-events 10
0.000 isc-net-0005/1206 connect(fd: 512, uservaddr: { .family: INET, port: 53, addr: 23.211.132.65 }, addrlen: 16) = 0
0.070 isc-net-0002/1203 connect(fd: 515, uservaddr: { .family: INET6, port: 53, addr: 2600:1401:2::43 }, addrlen: 28) = -1 ENETUNREACH (Network is unreachable)
0.031 isc-net-0006/1207 connect(fd: 513, uservaddr: { .family: INET6, port: 53, addr: 2600:1401:2::43 }, addrlen: 28) = -1 ENETUNREACH (Network is unreachable)
0.079 isc-net-0006/1207 sendto(fd: 3, buff: 0x7f73a40611b0, len: 106, flags: NOSIGNAL, addr: { .family: UNSPEC }, addr_len: NULL) = 106
0.180 isc-net-0006/1207 connect(fd: 519, uservaddr: { .family: INET6, port: 53, addr: 2600:1401:1::43 }, addrlen: 28) = -1 ENETUNREACH (Network is unreachable)
0.211 isc-net-0006/1207 sendto(fd: 3, buff: 0x7f73a4061230, len: 106, flags: NOSIGNAL, addr: { .family: UNSPEC }, addr_len: NULL) = 106
0.298 isc-net-0006/1207 connect(fd: 515, uservaddr: { .family: INET, port: 53, addr: 96.7.49.67 }, addrlen: 16) = 0
0.109 isc-net-0004/1205 connect(fd: 518, uservaddr: { .family: INET6, port: 53, addr: 2600:1401:2::43 }, addrlen: 28) = -1 ENETUNREACH (Network is unreachable)
0.164 isc-net-0002/1203 sendto(fd: 3, buff: 0x7f73ac064300, len: 107, flags: NOSIGNAL, addr: { .family: UNSPEC }, addr_len: NULL) = 107
0.247 isc-net-0002/1203 connect(fd: 522, uservaddr: { .family: INET6, port: 53, addr: 2600:1401:1::43 }, addrlen: 28) = -1 ENETUNREACH (Network is unreachable)
#
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221103045437.163510-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In some conditions, background processes in udpgro don't have enough
time to set up the sockets. When foreground processes start, this
results in the test failing with "./udpgso_bench_tx: sendmsg: Connection
refused". For instance, this happens from time to time on a Qualcomm
SA8540P SoC running CentOS Stream 9.
To fix this, increase the time given to background processes to
complete the startup before foreground processes start.
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Finally add support for filtering stats values, similar to
non-comparison mode filtering. For comparison mode 4 variants of stats
are important for filtering, as they allow to filter either A or B side,
but even more importantly they allow to filter based on value
difference, and for verdict stat value difference is MATCH/MISMATCH
classification. So with these changes it's finally possible to easily
check if there were any mismatches between failure/success outcomes on
two separate data sets. Like in an example below:
$ ./veristat -e file,prog,verdict,insns -C ~/baseline-results.csv ~/shortest-results.csv -f verdict_diff=mismatch
File Program Verdict (A) Verdict (B) Verdict (DIFF) Insns (A) Insns (B) Insns (DIFF)
------------------------------------- --------------------- ----------- ----------- -------------- --------- --------- -------------------
dynptr_success.bpf.linked1.o test_data_slice success failure MISMATCH 85 0 -85 (-100.00%)
dynptr_success.bpf.linked1.o test_read_write success failure MISMATCH 1992 0 -1992 (-100.00%)
dynptr_success.bpf.linked1.o test_ringbuf success failure MISMATCH 74 0 -74 (-100.00%)
kprobe_multi.bpf.linked1.o test_kprobe failure success MISMATCH 0 246 +246 (+100.00%)
kprobe_multi.bpf.linked1.o test_kprobe_manual failure success MISMATCH 0 246 +246 (+100.00%)
kprobe_multi.bpf.linked1.o test_kretprobe failure success MISMATCH 0 248 +248 (+100.00%)
kprobe_multi.bpf.linked1.o test_kretprobe_manual failure success MISMATCH 0 248 +248 (+100.00%)
kprobe_multi.bpf.linked1.o trigger failure success MISMATCH 0 2 +2 (+100.00%)
netcnt_prog.bpf.linked1.o bpf_nextcnt failure success MISMATCH 0 56 +56 (+100.00%)
pyperf600_nounroll.bpf.linked1.o on_event success failure MISMATCH 568128 1000001 +431873 (+76.02%)
ringbuf_bench.bpf.linked1.o bench_ringbuf success failure MISMATCH 8 0 -8 (-100.00%)
strobemeta.bpf.linked1.o on_event success failure MISMATCH 557149 1000001 +442852 (+79.49%)
strobemeta_nounroll1.bpf.linked1.o on_event success failure MISMATCH 57240 1000001 +942761 (+1647.03%)
strobemeta_nounroll2.bpf.linked1.o on_event success failure MISMATCH 501725 1000001 +498276 (+99.31%)
strobemeta_subprogs.bpf.linked1.o on_event success failure MISMATCH 65420 1000001 +934581 (+1428.59%)
test_map_in_map_invalid.bpf.linked1.o xdp_noop0 success failure MISMATCH 2 0 -2 (-100.00%)
test_mmap.bpf.linked1.o test_mmap success failure MISMATCH 46 0 -46 (-100.00%)
test_verif_scale3.bpf.linked1.o balancer_ingress success failure MISMATCH 845499 1000001 +154502 (+18.27%)
------------------------------------- --------------------- ----------- ----------- -------------- --------- --------- -------------------
Note that by filtering on verdict_diff=mismatch, it's now extremely easy and
fast to see any changes in verdict. Example above showcases both failure ->
success transitions (which are generally surprising) and success -> failure
transitions (which are expected if bugs are present).
Given veristat allows to query relative percent difference values, internal
logic for comparison mode is based on floating point numbers, so requires a bit
of epsilon precision logic, deviating from typical integer simple handling
rules.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce the concept of "stat variant", by which it's possible to
specify whether to use the value from A (baseline) side, B (comparison
or control) side, the absolute difference value or relative (percentage)
difference value.
To support specifying this, veristat recognizes `_a`, `_b`, `_diff`,
`_pct` suffixes, which can be appended to stat name(s). In
non-comparison mode variants are ignored (there is only `_a` variant
effectively), if no variant suffix is provided, `_b` is assumed, as
control group is of primary interest in comparison mode.
These stat variants can be flexibly combined with asc/desc orders.
Here's an example of ordering results first by verdict match/mismatch (or n/a
if one of the sides is missing; n/a is always considered to be the lowest
value), and within each match/mismatch/n/a group further sort by number of
instructions in B side. In this case we don't have MISMATCH cases, but N/A are
split from MATCH, demonstrating this custom ordering.
$ ./veristat -e file,prog,verdict,insns -s verdict_diff,insns_b_ -C ~/base.csv ~/comp.csv
File Program Verdict (A) Verdict (B) Verdict (DIFF) Insns (A) Insns (B) Insns (DIFF)
------------------ ------------------------------ ----------- ----------- -------------- --------- --------- --------------
bpf_xdp.o tail_lb_ipv6 N/A success N/A N/A 151895 N/A
bpf_xdp.o tail_nodeport_nat_egress_ipv4 N/A success N/A N/A 15619 N/A
bpf_xdp.o tail_nodeport_ipv6_dsr N/A success N/A N/A 1206 N/A
bpf_xdp.o tail_nodeport_ipv4_dsr N/A success N/A N/A 1162 N/A
bpf_alignchecker.o tail_icmp6_send_echo_reply N/A failure N/A N/A 74 N/A
bpf_alignchecker.o __send_drop_notify success N/A N/A 53 N/A N/A
bpf_host.o __send_drop_notify success N/A N/A 53 N/A N/A
bpf_host.o cil_from_host success N/A N/A 762 N/A N/A
bpf_xdp.o tail_lb_ipv4 success success MATCH 71736 73430 +1694 (+2.36%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 success success MATCH 21547 20920 -627 (-2.91%)
bpf_xdp.o tail_rev_nodeport_lb6 success success MATCH 17954 17905 -49 (-0.27%)
bpf_xdp.o tail_handle_nat_fwd_ipv6 success success MATCH 16974 17039 +65 (+0.38%)
bpf_xdp.o tail_nodeport_nat_ingress_ipv4 success success MATCH 7658 7713 +55 (+0.72%)
bpf_xdp.o tail_rev_nodeport_lb4 success success MATCH 7126 6934 -192 (-2.69%)
bpf_xdp.o tail_nodeport_nat_ingress_ipv6 success success MATCH 6405 6397 -8 (-0.12%)
bpf_xdp.o tail_nodeport_nat_ipv6_egress failure failure MATCH 752 752 +0 (+0.00%)
bpf_xdp.o cil_xdp_entry success success MATCH 423 423 +0 (+0.00%)
bpf_xdp.o __send_drop_notify success success MATCH 151 151 +0 (+0.00%)
bpf_alignchecker.o tail_icmp6_handle_ns failure failure MATCH 33 33 +0 (+0.00%)
------------------ ------------------------------ ----------- ----------- -------------- --------- --------- --------------
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When comparing two datasets, if either side is missing corresponding
record with the same file and prog name, currently veristat emits
misleading zeros/failures, and even tried to calculate a difference,
even though there is no data to compare against.
This patch improves internal logic of handling such situations. Now
we'll emit "N/A" in places where data is missing and comparison is
non-sensical.
As an example, in an artificially truncated and mismatched Cilium
results, the output looks like below:
$ ./veristat -e file,prog,verdict,insns -C ~/base.csv ~/comp.csv
File Program Verdict (A) Verdict (B) Verdict (DIFF) Insns (A) Insns (B) Insns (DIFF)
------------------ ------------------------------ ----------- ----------- -------------- --------- --------- --------------
bpf_alignchecker.o __send_drop_notify success N/A N/A 53 N/A N/A
bpf_alignchecker.o tail_icmp6_handle_ns failure failure MATCH 33 33 +0 (+0.00%)
bpf_alignchecker.o tail_icmp6_send_echo_reply N/A failure N/A N/A 74 N/A
bpf_host.o __send_drop_notify success N/A N/A 53 N/A N/A
bpf_host.o cil_from_host success N/A N/A 762 N/A N/A
bpf_xdp.o __send_drop_notify success success MATCH 151 151 +0 (+0.00%)
bpf_xdp.o cil_xdp_entry success success MATCH 423 423 +0 (+0.00%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 success success MATCH 21547 20920 -627 (-2.91%)
bpf_xdp.o tail_handle_nat_fwd_ipv6 success success MATCH 16974 17039 +65 (+0.38%)
bpf_xdp.o tail_lb_ipv4 success success MATCH 71736 73430 +1694 (+2.36%)
bpf_xdp.o tail_lb_ipv6 N/A success N/A N/A 151895 N/A
bpf_xdp.o tail_nodeport_ipv4_dsr N/A success N/A N/A 1162 N/A
bpf_xdp.o tail_nodeport_ipv6_dsr N/A success N/A N/A 1206 N/A
bpf_xdp.o tail_nodeport_nat_egress_ipv4 N/A success N/A N/A 15619 N/A
bpf_xdp.o tail_nodeport_nat_ingress_ipv4 success success MATCH 7658 7713 +55 (+0.72%)
bpf_xdp.o tail_nodeport_nat_ingress_ipv6 success success MATCH 6405 6397 -8 (-0.12%)
bpf_xdp.o tail_nodeport_nat_ipv6_egress failure failure MATCH 752 752 +0 (+0.00%)
bpf_xdp.o tail_rev_nodeport_lb4 success success MATCH 7126 6934 -192 (-2.69%)
bpf_xdp.o tail_rev_nodeport_lb6 success success MATCH 17954 17905 -49 (-0.27%)
------------------ ------------------------------ ----------- ----------- -------------- --------- --------- --------------
Internally veristat now separates joining two datasets and remembering the
join, and actually emitting a comparison view. This will come handy when we add
support for filtering and custom ordering in comparison mode.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
