| Age | Commit message (Collapse) | Author |
|---|
|
The tests done by test_xdp_redirect_multi.sh are now fully covered by
the CI through test_xdp_veth.c.
Remove test_xdp_redirect_multi.sh
Remove xdp_redirect_multi.c that was used by the script to load and
attach the BPF programs.
Remove their entries in the Makefile
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-6-fd0d39fca6e6@bootlin.com
|
|
XDP programs loaded on egress is tested by test_xdp_redirect_multi.sh
but not by the test_progs framework.
Add a test case in test_xdp_veth.c to test the XDP program on egress.
Use the same BPF program than test_xdp_redirect_multi.sh that replaces
the source MAC address by one provided through a BPF map.
Use a BPF program that stores the source MAC of received packets in a
map to check the test results.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-5-fd0d39fca6e6@bootlin.com
|
|
XDP redirections with BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS flags
are tested by test_xdp_redirect_multi.sh but not within the test_progs
framework.
Add a broadcast test case in test_xdp_veth.c to test them.
Use the same BPF programs than the one used by
test_xdp_redirect_multi.sh.
Use a BPF map to select the broadcast flags.
Use a BPF map with an entry per veth to check whether packets are
received or not
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-4-fd0d39fca6e6@bootlin.com
|
|
Broadcasting flags are hardcoded for each kind for protocol.
Create a redirect_flags map that allows to select the broadcasting flags
to use in the bpf_redirect_map(). The protocol ID is used as a key.
Set the old hardcoded values as default if the map isn't filled by the
BPF caller.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-3-fd0d39fca6e6@bootlin.com
|
|
Tests use the root network namespace, so they aren't fully independent
of each other. For instance, the index of the created veth interfaces
is incremented every time a new test is launched.
Wrap the network topology in a network namespace to ensure full
isolation. Use the append_tid() helper to ensure the uniqueness of this
namespace's name during parallel runs.
Remove the use of the append_tid() on the veth names as they now belong
to an already unique namespace.
Simplify cleanup_network() by directly deleting the namespaces
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-2-fd0d39fca6e6@bootlin.com
|
|
The network configuration is defined by a table of struct
veth_configuration. This isn't convenient if we want to add a network
configuration that isn't linked to a veth pair.
Create a struct net_configuration that holds the veth_configuration
table to ease adding new configuration attributes in upcoming patch.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-1-fd0d39fca6e6@bootlin.com
|
|
Following a similar rationale as commit e4835f1da425f ("kunit: tool:
Build compile_commands.json"), make a common developer tool available by
default for KUnit users.
Compared to compile_commands.json, there is a little more work to be
done to build the GDB scripts. Is it enough to affect development cycle
duration? Unscientific evaluation:
rm -rf .kunit; time tools/testing/kunit/kunit.py build --kunitconfig ./lib/kunit/.kunitconfig --jobs 96
Without this patch it took 14.77s, with this patch it took 14.83. So,
although `make scripts_gdb` is pretty slow, presumably most of that is
just the overhead of running Kbuild at all, actually building the
scripts is approximately free.
Note also, to actually get the GDB scripts the user needs to enable
CONFIG_SCRIPTS_GDB, but building the scripts_gdb target without that is
still harmless.
Link: https://lore.kernel.org/r/20250121-kunit-gdb-v1-1-faedfd0653ef@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Q is exported from Makefile.include so it is not necessary to manually
set it.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mykola Lysenko <mykolal@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-2-07de4482a581@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce a new kfunc to retrieve the node associated to a CPU:
int scx_bpf_cpu_node(s32 cpu)
Add the following kfuncs to provide BPF schedulers direct access to
per-node idle cpumasks information:
const struct cpumask *scx_bpf_get_idle_cpumask_node(int node)
const struct cpumask *scx_bpf_get_idle_smtmask_node(int node)
s32 scx_bpf_pick_idle_cpu_node(const cpumask_t *cpus_allowed,
int node, u64 flags)
s32 scx_bpf_pick_any_cpu_node(const cpumask_t *cpus_allowed,
int node, u64 flags)
Moreover, trigger an scx error when any of the non-node aware idle CPU
kfuncs are used when SCX_OPS_BUILTIN_IDLE_PER_NODE is enabled.
Cc: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Commit f2868b1a66d4f40f ("perf tools: Expose quiet/verbose variables in
Makefile.perf") moved the quiet infrastructure out of
tools/build/Makefile.build and into the top-level Makefile.perf file so
that the quiet infrastructure could be used throughout perf and not just
in Makefile.build.
Extract out the quiet infrastructure into Makefile.include so that it
can be leveraged outside of perf.
Fixes: f2868b1a66d4f40f ("perf tools: Expose quiet/verbose variables in Makefile.perf")
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mykola Lysenko <mykolal@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <qmo@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-1-07de4482a581@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Changes to MC remote need to be reflected in actual group memberships.
Add a test to verify that it is the case.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of inlining equivalents, use lib.sh-provided primitives.
Use defer to manage vx lifetime.
This will make it easier to extend the test in the next patch.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This helper could be useful to more than just forwarding tests.
Move it upstairs and port over to log_test_skip().
Split the function into two parts: the bit that actually checks and
reports skip, which is in a new function check_command(). And a bit
that exits the test script if the check fails. This allows users
consistent checking behavior while giving an option to bail out from
a single test without bailing out of the whole script.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Verify that for a connectible AF_VSOCK socket, merely having a transport
assigned is insufficient; socket must be connected for the sockmap to
accept.
This does not test datagram vsocks. Even though it hardly matters. VMCI is
the only transport that features VSOCK_TRANSPORT_F_DGRAM, but it has an
unimplemented vsock_transport::readskb() callback, making it unsupported by
BPF/sockmap.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 515745445e92 ("selftest/bpf: Add test for vsock removal from sockmap
on close()") added test that checked if proto::close() callback was invoked
on AF_VSOCK socket release. I.e. it verified that a close()d vsock does
indeed get removed from the sockmap.
It was done simply by creating a socket pair and attempting to replace a
close()d one with its peer. Since, due to a recent change, sockmap does not
allow updating index with a non-established connectible vsock, redo it with
a freshly established one.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pick up upstream x86 fixes before applying new patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When testing if we should try to compact memory or drop caches before we
run the THP or HugeTLB tests we use | as an or operator. This doesn't
work since run_vmtests.sh is written in shell where this is used to pipe
the output of the first argument into the second. Instead use the shell's
-o operator.
Link: https://lkml.kernel.org/r/20250212-kselftest-mm-no-hugepages-v1-1-44702f538522@kernel.org
Fixes: b433ffa8dbac ("selftests: mm: perform some system cleanup before using hugepages")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
getdelays had a compilation issue because the format string was not
updated when the "delay min" was added. For example, after adding the
"delay min" in printf, there were 7 strings but only 6 "%s" format
specifiers. Similarly, after adding the 't->cpu_delay_total', there were
7 variables but only 6 format characters specifiers, causing compilation
issues as follows. This commit fixes these issues to ensure that
getdelays compiles correctly.
root@xx:~/linux-next/tools/accounting$ make
getdelays.c:199:9: warning: format `%llu' expects argument of type
`long long unsigned int', but argument 8 has type `char *' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
216 | "delay total", "delay average", "delay max", "delay min",
| ~~~~~~~~~~~
| |
| char *
getdelays.c:200:21: note: format string is defined here
200 | " %15llu%15llu%15llu%15llu%15.3fms%13.6fms\n"
| ~~~~~^
| |
| long long unsigned int
| %15s
getdelays.c:199:9: warning: format `%f' expects argument of type
`double', but argument 12 has type `long long unsigned int' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
220 | (unsigned long long)t->cpu_delay_total,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long long unsigned int
.....
Link: https://lkml.kernel.org/r/20250208144400544RduNRhwIpT3m2JyRBqskZ@zte.com.cn
Fixes: f65c64f311ee ("delayacct: add delay min to record delay peak")
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: Qiang Tu <tu.qiang35@zte.com.cn>
Cc: wangyong <wang.yong12@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
musl-libc warns about the following:
/home/florian/dev/buildroot/output/arm64/rpi4-b/host/aarch64-buildroot-linux-musl/sysroot/usr/include/sys/errno.h:1:2: attention: #warning redirecting incorrect #include <sys/errno.h> to <errno.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/errno.h> to <errno.h>
| ^~~~~~~
/home/florian/dev/buildroot/output/arm64/rpi4-b/host/aarch64-buildroot-linux-musl/sysroot/usr/include/sys/fcntl.h:1:2: attention: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
| ^~~~~~~
include errno.h and fcntl.h directly.
Link: https://lkml.kernel.org/r/20250210200518.1137295-1-florian.fainelli@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Show parallelism level in profiles if requested by user.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/7f7bb87cbaa51bf1fb008a0d68b687423ce4bad4.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add calculation of the current parallelism level (number of threads actively
running on CPUs). The parallelism level can be shown in reports on its own,
and to calculate latency overheads.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/0f8c1b8eb12619029e31b3d5c0346f4616a5aeda.1739437531.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Test struct_ops programs returning referenced kptr. When the return type
of a struct_ops operator is pointer to struct, the verifier should
only allow programs that return a scalar NULL or a non-local kptr with the
correct type in its unmodified form.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250217190640.1748177-6-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test referenced kptr acquired through struct_ops argument tagged with
"__ref". The success case checks whether 1) a reference to the correct
type is acquired, and 2) the referenced kptr argument can be accessed in
multiple paths as long as it hasn't been released. In the fail cases,
we first confirm that a referenced kptr acquried through a struct_ops
argument is not allowed to be leaked. Then, we make sure this new
referenced kptr acquiring mechanism does not accidentally allow referenced
kptrs to flow into global subprograms through their arguments.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250217190640.1748177-4-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test that queues which are used for AF_XDP have the xsk nest attribute.
The attribute is currently empty, but its existence means the AF_XDP is
being used for the queue. Enable CONFIG_XDP_SOCKETS for
selftests/drivers/net tests, as well.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, the nest will not be present.
In the future, this attribute can be extended to include more data about
XSK as it is needed.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce tests to verify the correct functionality of the SO_RCVMARK and
SO_RCVPRIORITY socket options.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250214205828.48503-1-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes a grammatical error in a test log message
in reuseaddr_ports_exhausted.c for better clarity.
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250213152612.4434-1-pranav.tyagi03@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace literal 0 with macro PKEY_UNRESTRICTED where pkey_*() functions
are used in mm selftests for memory protection keys for ppc target.
Signed-off-by: Yury Khrustalev <yury.khrustalev@arm.com>
Suggested-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20250113170619.484698-4-yury.khrustalev@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Replace literal 0 with macro PKEY_UNRESTRICTED where pkey_*() functions
are used in mm selftests for memory protection keys.
Signed-off-by: Yury Khrustalev <yury.khrustalev@arm.com>
Suggested-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250113170619.484698-3-yury.khrustalev@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Sync load latency related bit fields into the tool's header copy
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250205060547.1337-4-ravi.bangoria@amd.com
|
|
Add a selftest for io_uring zero copy Rx. This test cannot run locally
and requires a remote host to be configured in net.config. The remote
host must have hardware support for zero copy Rx as listed in the
documentation page. The test will restore the NIC config back to before
the test and is idempotent.
liburing is required to compile the test and be installed on the remote
host running the test.
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20250215000947.789731-12-dw@davidwei.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next into for-6.15/io_uring-rx-zc
Merge networking zerocopy receive tree, to get the prep patches for
the io_uring rx zc support.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (63 commits)
net: add helpers for setting a memory provider on an rx queue
net: page_pool: add memory provider helpers
net: prepare for non devmem TCP memory providers
net: page_pool: add a mp hook to unregister_netdevice*
net: page_pool: add callback for mp info printing
netdev: add io_uring memory provider info
net: page_pool: create hooks for custom memory providers
net: generalise net_iov chunk owners
net: prefix devmem specific helpers
net: page_pool: don't cast mp param to devmem
tools: ynl: add all headers to makefile deps
eth: fbnic: set IFF_UNICAST_FLT to avoid enabling promiscuous mode when adding unicast addrs
eth: fbnic: add MAC address TCAM to debugfs
tools: ynl-gen: support limits using definitions
tools: ynl-gen: don't output external constants
net/mlx5e: Avoid WARN_ON when configuring MQPRIO with HTB offload enabled
net/mlx5e: Remove unused mlx5e_tc_flow_action struct
net/mlx5: Remove stray semicolon in LAG port selection table creation
net/mlx5e: Support FEC settings for 200G per lane link modes
net/mlx5: Add support for 200Gbps per lane link modes
...
|
|
We need the faux_device changes in here for future work.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Move a warning about a lld.ld breakage into the verbose setting as
said breakage has been fixed in the meantime
- Teach objtool to ignore dangling jump table entries added by Clang
* tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Move dodgy linker warn to verbose
objtool: Ignore dangling jump table entries
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
|
|
Using a single global idle mask can lead to inefficiencies and a lot of
stress on the cache coherency protocol on large systems with multiple
NUMA nodes, since all the CPUs can create a really intense read/write
activity on the single global cpumask.
Therefore, split the global cpumask into multiple per-NUMA node cpumasks
to improve scalability and performance on large systems.
The concept is that each cpumask will track only the idle CPUs within
its corresponding NUMA node, treating CPUs in other NUMA nodes as busy.
In this way concurrent access to the idle cpumask will be restricted
within each NUMA node.
The split of multiple per-node idle cpumasks can be controlled using the
SCX_OPS_BUILTIN_IDLE_PER_NODE flag.
By default SCX_OPS_BUILTIN_IDLE_PER_NODE is not enabled and a global
host-wide idle cpumask is used, maintaining the previous behavior.
NOTE: if a scheduler explicitly enables the per-node idle cpumasks (via
SCX_OPS_BUILTIN_IDLE_PER_NODE), scx_bpf_get_idle_cpu/smtmask() will
trigger an scx error, since there are no system-wide cpumasks.
= Test =
Hardware:
- System: DGX B200
- CPUs: 224 SMT threads (112 physical cores)
- Processor: INTEL(R) XEON(R) PLATINUM 8570
- 2 NUMA nodes
Scheduler:
- scx_simple [1] (so that we can focus at the built-in idle selection
policy and not at the scheduling policy itself)
Test:
- Run a parallel kernel build `make -j $(nproc)` and measure the average
elapsed time over 10 runs:
avg time | stdev
---------+------
before: 52.431s | 2.895
after: 50.342s | 2.895
= Conclusion =
Splitting the global cpumask into multiple per-NUMA cpumasks helped to
achieve a speedup of approximately +4% with this particular architecture
and test case.
The same test on a DGX-1 (40 physical cores, Intel Xeon E5-2698 v4 @
2.20GHz, 2 NUMA nodes) shows a speedup of around 1.5-3%.
On smaller systems, I haven't noticed any measurable regressions or
improvements with the same test (parallel kernel build) and scheduler
(scx_simple).
Moreover, with a modified scx_bpfland that uses the new NUMA-aware APIs
I observed an additional +2-2.5% performance improvement with the same
test.
[1] https://github.com/sched-ext/scx/blob/main/scheds/c/scx_simple.bpf.c
Cc: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add the new scheduler flag SCX_OPS_BUILTIN_IDLE_PER_NODE, which allows
BPF schedulers to select between using a global flat idle cpumask or
multiple per-node cpumasks.
This only introduces the flag and the mechanism to enable/disable this
feature without affecting any scheduling behavior.
Cc: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The driver for the 8250 console is not used, as no port is found.
Instead the prom0 bootconsole is used the whole time.
The prom driver translates '\n' to '\r\n' before handing of the message
off to the firmware. The firmware performs the same translation again.
In the final output produced by QEMU each line ends with '\r\r\n'.
This breaks the kunit parser, which can only handle '\r\n' and '\n'.
Use the Zilog console instead. It works correctly, is the one documented
by the QEMU manual and also saves a bit of codesize:
Before=4051011, After=4023326, chg -0.68%
Observed on QEMU 9.2.0.
Link: https://lore.kernel.org/r/20250214-kunit-qemu-sparc-console-v1-1-ba1dfdf8f0b1@linutronix.de
Fixes: 87c9c1631788 ("kunit: tool: add support for QEMU")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
As noted in [0], SeaBIOS (QEMU default) makes a mess of the terminal,
qboot does not.
It turns out this is actually useful with kunit.py, since the user is
exposed to this issue if they set --raw_output=all.
qboot is also faster than SeaBIOS, but it's is marginal for this
usecase.
[0] https://lore.kernel.org/all/CA+i-1C0wYb-gZ8Mwh3WSVpbk-LF-Uo+njVbASJPe1WXDURoV7A@mail.gmail.com/
Both SeaBIOS and qboot are x86-specific.
Link: https://lore.kernel.org/r/20250124-kunit-qboot-v1-1-815e4d4c6f7c@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Fix objtool warning due to future Rust 1.85.0 (to be released in a
few days)
- Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning
* tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: rbtree: fix overindented list item
objtool/rust: add one more `noreturn` Rust function
|
|
kernfs_rename_lock is used to obtain stable kernfs_node::{name|parent}
pointer. This is a preparation to access kernfs_node::parent under RCU
and ensure that the pointer remains stable under the RCU lifetime
guarantees.
For a complete path, as it is done in kernfs_path_from_node(), the
kernfs_rename_lock is still required in order to obtain a stable parent
relationship while computing the relevant node depth. This must not
change while the nodes are inspected in order to build the path.
If the kernfs user never moves the nodes (changes the parent) then the
kernfs_rename_lock is not required and the RCU guarantees are
sufficient. This "restriction" can be set with
KERNFS_ROOT_INVARIANT_PARENT. Otherwise the lock is required.
Rename kernfs_node::parent to kernfs_node::__parent to denote the RCU
access and use RCU accessor while accessing the node.
Make cgroup use KERNFS_ROOT_INVARIANT_PARENT since the parent here can
not change.
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-6-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a simple repro for the issue of miscalculating LDX/STX/ST CO-RE
relocation size adjustment when the CO-RE relocation target type is an
ARRAY.
We need to make sure that compiler generates LDX/STX/ST instruction with
CO-RE relocation against entire ARRAY type, not ARRAY's element. With
the code pattern in selftest, we get this:
59: 61 71 00 00 00 00 00 00 w1 = *(u32 *)(r7 + 0x0)
00000000000001d8: CO-RE <byte_off> [5] struct core_reloc_arrays::a (0:0)
Where offset of `int a[5]` is embedded (through CO-RE relocation) into memory
load instruction itself.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250207014809.1573841-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Libbpf has a somewhat obscure feature of automatically adjusting the
"size" of LDX/STX/ST instruction (memory store and load instructions),
based on originally recorded access size (u8, u16, u32, or u64) and the
actual size of the field on target kernel. This is meant to facilitate
using BPF CO-RE on 32-bit architectures (pointers are always 64-bit in
BPF, but host kernel's BTF will have it as 32-bit type), as well as
generally supporting safe type changes (unsigned integer type changes
can be transparently "relocated").
One issue that surfaced only now, 5 years after this logic was
implemented, is how this all works when dealing with fields that are
arrays. This isn't all that easy and straightforward to hit (see
selftests that reproduce this condition), but one of sched_ext BPF
programs did hit it with innocent looking loop.
Long story short, libbpf used to calculate entire array size, instead of
making sure to only calculate array's element size. But it's the element
that is loaded by LDX/STX/ST instructions (1, 2, 4, or 8 bytes), so
that's what libbpf should check. This patch adjusts the logic for
arrays and fixed the issue.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250207014809.1573841-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Added test cases to ensure that programs with stack sizes exceeding 512
bytes are restricted in non-JITed mode, and can be executed normally in
JITed mode, even with stack sizes exceeding 512 bytes due to the presence
of may_goto instructions.
Test result:
echo "0" > /proc/sys/net/core/bpf_jit_enable
./test_progs -t verifier_stack_ptr
...
stack size 512 with may_goto with jit:SKIP
stack size 512 with may_goto without jit:OK
...
Summary: 1/27 PASSED, 25 SKIPPED, 0 FAILED
echo "1" > /proc/sys/net/core/bpf_jit_enable
./test_progs -t verifier_stack_ptr
...
stack size 512 with may_goto with jit:OK
stack size 512 with may_goto without jit:SKIP
...
Summary: 1/27 PASSED, 25 SKIPPED, 0 FAILED
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Link: https://lore.kernel.org/r/20250214091823.46042-4-mrpre@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In some cases, the verification logic under the interpreter and JIT
differs, such as may_goto, and the test program behaves differently under
different runtime modes, requiring separate verification logic for each
result.
Introduce __load_if_JITed and __load_if_no_JITed annotation for tests.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Link: https://lore.kernel.org/r/20250214091823.46042-3-mrpre@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When working on OpenRISC support for restartable sequences I noticed
and fixed these two issues with the riscv support bits.
1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly
passed to the macro. Fix this by adding 'inc' to the list of macro
arguments.
2 The inline asm input constraints for 'inc' and 'off' use "er", The
riscv gcc port does not have an "e" constraint, this looks to be
copied from the x86 port. Fix this by just using an "r" constraint.
I have compile tested this only for riscv. However, the same fixes I
use in the OpenRISC rseq selftests and everything passes with no issues.
Fixes: 171586a6ab66 ("selftests/rseq: riscv: Template memory ordering and percpu access mode")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250114170721.3613280-1-shorne@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
It's recently changed to allocate dynamically but misses to update some
arch-dependent codes to use perf_sample__user_regs().
Fixes: dc6d2bc2d893a878 ("perf sample: Make user_regs and intr_regs optional")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250214191641.756664-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix lock imbalance in a corner case of dispatch_to_local_dsq()
- Migration disabled tasks were confusing some BPF schedulers and its
handling had a bug. Fix it and simplify the default behavior by
dispatching them automatically
- ops.tick(), ops.disable() and ops.exit_task() were incorrectly
disallowing kfuncs that require the task argument to be the rq
operation is currently operating on and thus is rq-locked.
Allow them.
- Fix autogroup migration handling bug which was occasionally
triggering a warning in the cgroup migration path
- tools/sched_ext, selftest and other misc updates
* tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
sched_ext: selftests: Fix grammar in tests description
sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq()
sched_ext: Fix migration disabled handling in targeted dispatches
sched_ext: Implement auto local dispatching of migration disabled tasks
sched_ext: Fix incorrect time delta calculation in time_delta()
sched_ext: Fix lock imbalance in dispatch_to_local_dsq()
sched_ext: selftests/dsp_local_on: Fix selftest on UP systems
tools/sched_ext: Add helper to check task migration state
sched_ext: Fix incorrect autogroup migration detection
sched_ext: selftests/dsp_local_on: Fix sporadic failures
selftests/sched_ext: Fix enum resolution
sched_ext: Include task weight in the error state dump
sched_ext: Fixes typos in comments
|
|
Since the commit dc6d2bc2d893 ("perf sample: Make user_regs and
intr_regs optional"), the building for Arm64 reports error:
arch/arm64/util/unwind-libdw.c: In function ‘libdw__arch_set_initial_registers’:
arch/arm64/util/unwind-libdw.c:11:32: error: initialization of ‘struct regs_dump *’ from incompatible pointer type ‘struct regs_dump **’ [-Werror=incompatible-pointer-types]
11 | struct regs_dump *user_regs = &ui->sample->user_regs;
| ^
cc1: all warnings being treated as errors
make[6]: *** [/home/niayan01/linux/tools/build/Makefile.build:85: arch/arm64/util/unwind-libdw.o] Error 1
make[5]: *** [/home/niayan01/linux/tools/build/Makefile.build:138: util] Error 2
arch/arm64/tests/dwarf-unwind.c: In function ‘test__arch_unwind_sample’:
arch/arm64/tests/dwarf-unwind.c:48:27: error: initialization of ‘struct regs_dump *’ from incompatible pointer type ‘struct regs_dump **’ [-Werror=incompatible-pointer-types]
48 | struct regs_dump *regs = &sample->user_regs;
| ^
To fix the issue, use the helper perf_sample__user_regs() to retrieve
the user_regs.
Fixes: dc6d2bc2d893 ("perf sample: Make user_regs and intr_regs optional")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250214111025.14478-1-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
|
