| Age | Commit message (Collapse) | Author |
|---|
|
Since the notion of versions was introduced for bpftool, it has been
following the version number of the kernel (using the version number
corresponding to the tree in which bpftool's sources are located). The
rationale was that bpftool's features are loosely tied to BPF features
in the kernel, and that we could defer versioning to the kernel
repository itself.
But this versioning scheme is confusing today, because a bpftool binary
should be able to work with both older and newer kernels, even if some
of its recent features won't be available on older systems. Furthermore,
if bpftool is ported to other systems in the future, keeping a
Linux-based version number is not a good option.
Looking at other options, we could either have a totally independent
scheme for bpftool, or we could align it on libbpf's version number
(with an offset on the major version number, to avoid going backwards).
The latter comes with a few drawbacks:
- We may want bpftool releases in-between two libbpf versions. We can
always append pre-release numbers to distinguish versions, although
those won't look as "official" as something with a proper release
number. But at the same time, having bpftool with version numbers that
look "official" hasn't really been an issue so far.
- If no new feature lands in bpftool for some time, we may move from
e.g. 6.7.0 to 6.8.0 when libbpf levels up and have two different
versions which are in fact the same.
- Following libbpf's versioning scheme sounds better than kernel's, but
ultimately it doesn't make too much sense either, because even though
bpftool uses the lib a lot, its behaviour is not that much conditioned
by the internal evolution of the library (or by new APIs that it may
not use).
Having an independent versioning scheme solves the above, but at the
cost of heavier maintenance. Developers will likely forget to increase
the numbers when adding features or bug fixes, and we would take the
risk of having to send occasional "catch-up" patches just to update the
version number.
Based on these considerations, this patch aligns bpftool's version
number on libbpf's. This is not a perfect solution, but 1) it's
certainly an improvement over the current scheme, 2) the issues raised
above are all minor at the moment, and 3) we can still move to an
independent scheme in the future if we realise we need it.
Given that libbpf is currently at version 0.7.0, and bpftool, before
this patch, was at 5.16, we use an offset of 6 for the major version,
bumping bpftool to 6.7.0. Libbpf does not export its patch number;
leave bpftool's patch number at 0 for now.
It remains possible to manually override the version number by setting
BPFTOOL_VERSION when calling make.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220210104237.11649-3-quentin@isovalent.com
|
|
To help users check what version of libbpf is being used with bpftool,
print the number along with bpftool's own version number.
Output:
$ ./bpftool version
./bpftool v5.16.0
using libbpf v0.7
features: libbfd, libbpf_strict, skeletons
$ ./bpftool version --json --pretty
{
"version": "5.16.0",
"libbpf_version": "0.7",
"features": {
"libbfd": true,
"libbpf_strict": true,
"skeletons": true
}
}
Note that libbpf does not expose its patch number.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220210104237.11649-2-quentin@isovalent.com
|
|
Tests to ensure validator boundary cases are working correctly within
close and far bounds. Ensures __data_loc and __rel_loc strings are
null terminated and within range. Ensures min size checks work as
expected.
Link: https://lkml.kernel.org/r/20220118204326.2169-11-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Tests perf can be attached to and written out correctly. Ensures attach
updates status bits in user programs.
Link: https://lkml.kernel.org/r/20220118204326.2169-10-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Tests matching deletes, creation of basic and complex types. Ensures
common patterns work correctly when interacting with dynamic_events
file.
Link: https://lkml.kernel.org/r/20220118204326.2169-9-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Tests basic functionality of registering/deregistering, status and
writing data out via ftrace mechanisms within user_events.
Link: https://lkml.kernel.org/r/20220118204326.2169-8-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Update test_xdp_update_frags adding a test for a buffer size
set to (MAX_SKB_FRAGS + 2) * PAGE_SIZE. The kernel is supposed
to return -ENOMEM.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/3e4afa0ee4976854b2f0296998fe6754a80b62e5.1644366736.git.lorenzo@kernel.org
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- sparx5: fix get_stat64 out-of-bound access and crash
- smc: fix netdev ref tracker misuse
Previous releases - regressions:
- eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid
overflows
- eth: ocelot: fix all IP traffic getting trapped to CPU with PTP
over IP
- bonding: fix rare link activation misses in 802.3ad mode
Previous releases - always broken:
- tcp: fix tcp sock mem accounting in zero-copy corner cases
- remove the cached dst when uncloning an skb dst and its metadata,
since we only have one ref it'd lead to an UaF
- netfilter:
- conntrack: don't refresh sctp entries in closed state
- conntrack: re-init state for retransmitted syn-ack, avoid
connection establishment getting stuck with strange stacks
- ctnetlink: disable helper autoassign, avoid it getting lost
- nft_payload: don't allow transport header access for fragments
- dsa: fix use of devres for mdio throughout drivers
- eth: amd-xgbe: disable interrupts during pci removal
- eth: dpaa2-eth: unregister netdev before disconnecting the PHY
- eth: ice: fix IPIP and SIT TSO offload"
* tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister
net: mscc: ocelot: fix mutex lock error during ethtool stats read
ice: Avoid RTNL lock when re-creating auxiliary device
ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
ice: fix IPIP and SIT TSO offload
ice: fix an error code in ice_cfg_phy_fec()
net: mpls: Fix GCC 12 warning
dpaa2-eth: unregister the netdev before disconnecting from the PHY
skbuff: cleanup double word in comment
net: macb: Align the dma and coherent dma masks
mptcp: netlink: process IPv6 addrs in creating listening sockets
selftests: mptcp: add missing join check
net: usb: qmi_wwan: Add support for Dell DW5829e
vlan: move dev_put into vlan_dev_uninit
vlan: introduce vlan_dev_free_egress_priority
ax25: fix UAF bugs of net_device caused by rebinding operation
net: dsa: fix panic when DSA master device unbinds on shutdown
net: amd-xgbe: disable interrupts during pci removal
tipc: rate limit warning for received illegal binding update
net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Build and run-time fixes to pidfd, clone3, and ir tests"
* tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ir: fix build with ancient kernel headers
selftests: fixup build warnings in pidfd / clone3 tests
pidfd: fix test failure due to stack overflow on some arches
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Fixes to the test and usage documentation"
* tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Fix usage bug
kunit: fix missing f in f-string in run_checks.py
|
|
Some distros may enable rp_filter by default. After ns1 change addr to
10.0.2.99 and set default router to 10.0.2.1, while the connected router
address is still 10.0.1.1. The router will not reply the arp request
from ns1. Fix it by setting the router's veth0 rp_filter to 0.
Before the fix:
# ./nft_fib.sh
PASS: fib expression did not cause unwanted packet drops
Netns nsrouter-HQkDORO2 fib counter doesn't match expected packet count of 1 for 1.1.1.1
table inet filter {
chain prerouting {
type filter hook prerouting priority filter; policy accept;
ip daddr 1.1.1.1 fib saddr . iif oif missing counter packets 0 bytes 0 drop
ip6 daddr 1c3::c01d fib saddr . iif oif missing counter packets 0 bytes 0 drop
}
}
After the fix:
# ./nft_fib.sh
PASS: fib expression did not cause unwanted packet drops
PASS: fib expression did drop packets for 1.1.1.1
PASS: fib expression did drop packets for 1c3::c01d
Fixes: 82944421243e ("selftests: netfilter: add fib test case")
Signed-off-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Generealize light skeleton by hiding mmap details in skel_internal.h
In this form generated lskel.h is usable both by user space and by the kernel.
Note that previously #include <bpf/bpf.h> was in *.lskel.h file.
To avoid #ifdef-s in a generated lskel.h the include of bpf.h is moved
to skel_internal.h, but skel_internal.h is also used by gen_loader.c
which is part of libbpf. Therefore skel_internal.h does #include "bpf.h"
in case of user space, so gen_loader.c and lskel.h have necessary definitions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209232001.27490-4-alexei.starovoitov@gmail.com
|
|
Prepare light skeleton to be used in the kernel module and in the user space.
The look and feel of lskel.h is mostly the same with the difference that for
user space the skel->rodata is the same pointer before and after skel_load
operation, while in the kernel the skel->rodata after skel_open and the
skel->rodata after skel_load are different pointers.
Typical usage of skeleton remains the same for kernel and user space:
skel = my_bpf__open();
skel->rodata->my_global_var = init_val;
err = my_bpf__load(skel);
err = my_bpf__attach(skel);
// access skel->rodata->my_global_var;
// access skel->bss->another_var;
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209232001.27490-3-alexei.starovoitov@gmail.com
|
|
Print path and name of a data file into raw dump (-D)
<file_offset>@<path/file>:
0x2226a@perf.data [0x30]: event: 9
or
0x15cc36@perf.data/data.7 [0x30]: event: 9
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/e8378fd4910c10751b001be880705653989283c2.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Load data directory files and provide basic raw dump and aggregated
analysis support of data directories in report mode, still with no
memory consumption optimizations.
READER_MAX_SIZE is chosen based on the results of measurements on
different machines on perf.data directory sizes >1GB. On machines
with big core count (192 cores) the difference between 1MB and 2MB
is about 4%. Other sizes (>2MB) are quite equal to 2MB.
On machines with small core count (4-24) there is no differences
between 1-16 MB sizes. So this constant is 2MB.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/3f10c13a226c0ceb53e88a082f847b91c1ae2c25.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Implement compatibility checks for other modes and related command line
options: asynchronous (--aio) trace streaming and affinity (--affinity)
modes, pipe mode, AUX area tracing --snapshot and --aux-sample options,
--switch-output, --switch-output-event, --switch-max-files and
--timestamp-filename options. Parallel data streaming is compatible with
Zstd compression (--compression-level) and external control commands
(--control). CPU mask provided via -C option filters --threads
specification masks.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/fadc1cf74057af4d5766248fcfe5cdde40732aa9.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Extend --threads option in perf record command line interface.
The option can have a value in the form of masks that specify
CPUs to be monitored with data streaming threads and its layout
in system topology. The masks can be filtered using CPU mask
provided via -C option.
The specification value can be user defined list of masks. Masks
separated by colon define CPUs to be monitored by one thread and
affinity mask of that thread is separated by slash. For example:
<cpus mask 1>/<affinity mask 1>:<cpu mask 2>/<affinity mask 2>
specifies parallel threads layout that consists of two threads
with corresponding assigned CPUs to be monitored.
The specification value can be a string e.g. "cpu", "core" or
"package" meaning creation of data streaming thread for every
CPU or core or package to monitor distinct CPUs or CPUs grouped
by core or package.
The option provided with no or empty value defaults to per-cpu
parallel threads layout creating data streaming thread for every
CPU being monitored.
Document --threads option syntax and parallel data streaming modes
in Documentation/perf-record.txt.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/079e2619be70c465317cf7c9fdaf5fa069728c32.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Provide --threads option in perf record command line interface.
The option creates a data streaming thread for each CPU in the system.
Document --threads option in Documentation/perf-record.txt.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/01aeae43b047f428596c4ef9f9342ab94865cedd.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce bytes_transferred and bytes_compressed stats so they
would capture statistics for the related data buffer transfers.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/b5d598034c507dfb7544d2125500280b7d434764.1642440724.git.alexey.v.bayduraev@linux.intel.com
[ Use PRiu64 to print u64 values, fixing the build on 32-bit architectures ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce compressor object into mmap object so it could be used to
pack the data stream from the corresponding kernel data buffer.
Initialize and make use of the introduced per mmap compressor.
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/r/80edc286cf6543139a7d5a91217605123aa0b50d.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce a function to calculate the total amount of data written
and use it to support the --max-size option.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/3e2c69186641446f8ab003ec209bccc762b3394d.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce data file objects into mmap object so it could be used to
process and store data stream from the corresponding kernel data buffer.
Initialize data files located at mmap buffer objects so trace data
can be written into several data file located at data directory.
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/r/177077f7734b63e5c999ccd75ac6dc3c694f0d0d.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Start thread in detached state because its management is implemented
via messaging to avoid any scaling issues. Block signals prior thread
start so only main tool thread would be notified on external async
signals during data collection. Thread affinity mask is used to assign
eligible CPUs for the thread to run. Wait and sync on thread start using
thread ack pipe.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/95784dd9f7c81ee408eab27b50b4c09ad4cf7be6.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signal thread to terminate by closing write fd of msg pipe.
Receive THREAD_MSG__READY message as the confirmation of the
thread's termination. Stop threads created for parallel trace
streaming prior their stats processing.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/55ef8cc5ec3a96360660d9dc1763573225325f8c.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce thread local variable and use it for threaded trace streaming.
Use thread affinity mask instead of record affinity mask in affinity
modes. Use evlist__ctlfd_update() to propagate control commands from
thread object to global evlist object to enable evlist__ctlfd_*
functionality. Move waking and sample statistic to struct record_thread
and introduce record__waking function to calculate the total number of
wakes.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/0d127555219991c1dcd6c6bb76b24fa6b78d2932.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce evlist__ctlfd_update() function to propagate external control
commands to global evlist object.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/7df52c9816b13c74897b9e518128b29a391462fe.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce thread specific data object and array of such objects
to store and manage thread local data. Implement functions to
allocate, initialize, finalize and release thread specific data.
Thread local maps and overwrite_maps arrays keep pointers to
mmap buffer objects to serve according to maps thread mask.
Thread local pollfd array keeps event fds connected to mmaps
buffers according to maps thread mask.
Thread control commands are delivered via thread local comm pipes
and ctlfd_pos fd. External control commands (--control option)
are delivered via evlist ctlfd_pos fd and handled by the main
tool thread.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/fc9f74af6f822d9c0fa0e145c3564a760dbe3d4b.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce a function to duplicate an existing file descriptor in
the fdarray structure. The function returns the position of the duplicated
file descriptor.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/2891f1def287d5863cc82683a4d5879195c8d90c.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce affinity and mmap thread masks. Thread affinity mask
defines CPUs that a thread is allowed to run on. Thread maps
mask defines mmap data buffers the thread serves to stream
profiling data from.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/9042bf7daf988e17e17e6acbf5d29590bde869cd.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce a new test for Hyper-V nSVM extensions (Hyper-V on KVM) and add
a test for enlightened MSR-Bitmap feature:
- Intercept access to MSR_FS_BASE in L1 and check that this works
with enlightened MSR-Bitmap disabled.
- Enabled enlightened MSR-Bitmap and check that the intercept still works
as expected.
- Intercept access to MSR_GS_BASE but don't clear the corresponding bit
from clean fields mask, KVM is supposed to skip updating MSR-Bitmap02 and
thus the consequent access to the MSR from L2 will not get intercepted.
- Finally, clear the corresponding bit from clean fields mask and check
that access to MSR_GS_BASE is now intercepted.
The test works with the assumption, that access to MSR_FS_BASE/MSR_GS_BASE
is not intercepted for L1. If this ever becomes not true the test will
fail as nested_svm_exit_handled_msr() always checks L1's MSR-Bitmap for
L2 irrespective of clean fields. The behavior is correct as enlightened
MSR-Bitmap feature is just an optimization, KVM is not obliged to ignore
updates when the corresponding bit in clean fields stays clear.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There's a copy of 'struct vmcb_control_area' definition in KVM selftests,
update it to allow testing of the newly introduced features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Similar to VMX, allocate memory for MSR-Bitmap and fill in 'msrpm_base_pa'
in VMCB. To use it, tests will need to set INTERCEPT_MSR_PROT interception
along with the required bits in the MSR-Bitmap.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce a test for enlightened MSR-Bitmap feature (Hyper-V on KVM):
- Intercept access to MSR_FS_BASE in L1 and check that this works
with enlightened MSR-Bitmap disabled.
- Enabled enlightened MSR-Bitmap and check that the intercept still works
as expected.
- Intercept access to MSR_GS_BASE but don't clear the corresponding bit
from 'hv_clean_fields', KVM is supposed to skip updating MSR-Bitmap02 and
thus the consequent access to the MSR from L2 will not get intercepted.
- Finally, clear the corresponding bit from 'hv_clean_fields' and check
that access to MSR_GS_BASE is now intercepted.
The test works with the assumption, that access to MSR_FS_BASE/MSR_GS_BASE
is not intercepted for L1. If this ever becomes not true the test will
fail as nested_vmx_exit_handled_msr() always checks L1's MSR-Bitmap for
L2 irrespective of 'hv_clean_fields'. The behavior is correct as
enlightened MSR-Bitmap feature is just an optimization, KVM is not obliged
to ignore updates when the corresponding bit in 'hv_clean_fields' stays
clear.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Instead of just resetting 'hv_clean_fields' to 0 on every enlightened
vmresume, do the expected cleaning of the corresponding bit on enlightened
vmwrite. Avoid direct access to 'current_evmcs' from evmcs_test to support
the change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
MSR-Bitmap
CPUID 0x40000000.EAX is now always present as it has Enlightened
MSR-Bitmap feature bit set. Adapt the test accordingly. Opportunistically
add a check for the supported eVMCS version range.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add an option to dirty_log_perf_test.c to disable
KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE and KVM_DIRTY_LOG_INITIALLY_SET so
the legacy dirty logging code path can be tested.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-19-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Stats from discarded entries should be omitted.
But a lock class may have both good and bad entries.
If the first entry was bad, we can zero-fill the stats and only add good
stats if any.
The entry can remove the discard state if it finds a good entry later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127000050.3011493-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -c or --combine-locks option is to merge lock instances in the
same class into a single entry. It compares the name of the locks
and marks duplicated entries using lock_stat->combined.
# perf lock report
Name acquired contended avg wait (ns) total wait (ns) max wait (ns) min wait (ns)
rcu_read_lock 251225 0 0 0 0 0
&(ei->i_block_re... 8731 0 0 0 0 0
&sb->s_type->i_l... 8731 0 0 0 0 0
hrtimer_bases.lock 5261 0 0 0 0 0
hrtimer_bases.lock 2626 0 0 0 0 0
hrtimer_bases.lock 1953 0 0 0 0 0
hrtimer_bases.lock 1382 0 0 0 0 0
cpu_hotplug_lock 1350 0 0 0 0 0
hrtimer_bases.lock 1273 0 0 0 0 0
hrtimer_bases.lock 1269 0 0 0 0 0
# perf lock report -c
Name acquired contended avg wait (ns) total wait (ns) max wait (ns) min wait (ns)
rcu_read_lock 251225 0 0 0 0 0
hrtimer_bases.lock 39450 0 0 0 0 0
&sb->s_type->i_l... 10301 1 662 662 662 662
ptlock_ptr(page) 10173 2 701 1402 760 642
&(ei->i_block_re... 8732 0 0 0 0 0
&xa->xa_lock 8088 0 0 0 0 0
&base->lock 6705 0 0 0 0 0
&p->pi_lock 5549 0 0 0 0 0
&dentry->d_lockr... 5010 4 1274 5097 1844 789
&ep->lock 3958 0 0 0 0 0
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127000050.3011493-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It has 20 character spaces for name so lock names shorter than 20
should be printed without ellipsis.
Before:
# perf lock report
Name acquired contended avg wait (ns) total wait (ns) max wait (ns) min wait (ns)
rcu_read_lock 251225 0 0 0 0 0
&(ei->i_block_re... 8731 0 0 0 0 0
&sb->s_type->i_l... 8731 0 0 0 0 0
hrtimer_bases.lo... 5261 0 0 0 0 0
hrtimer_bases.lo... 2626 0 0 0 0 0
hrtimer_bases.lo... 1953 0 0 0 0 0
hrtimer_bases.lo... 1382 0 0 0 0 0
cpu_hotplug_lock... 1350 0 0 0 0 0
After:
# perf lock report
Name acquired contended avg wait (ns) total wait (ns) max wait (ns) min wait (ns)
rcu_read_lock 251225 0 0 0 0 0
&(ei->i_block_re... 8731 0 0 0 0 0
&sb->s_type->i_l... 8731 0 0 0 0 0
hrtimer_bases.lock 5261 0 0 0 0 0
hrtimer_bases.lock 2626 0 0 0 0 0
hrtimer_bases.lock 1953 0 0 0 0 0
hrtimer_bases.lock 1382 0 0 0 0 0
cpu_hotplug_lock 1350 0 0 0 0 0
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127000050.3011493-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Instead of the random order, sort it by lock class name.
Before:
# perf lock info -m
Address of instance: name of class
0xffffa0d940ac5310: &dentry->d_lockref.lock
0xffffa0c20b0e1cb0: &dentry->d_lockref.lock
0xffffa0d8e051cc48: &base->lock
0xffffa0d94f992110: &anon_vma->rwsem
0xffffa0d947a4f278: (null)
0xffffa0c208f6e108: &map->lock
0xffffa0c213ad32c8: &cfs_rq->removed.lock
0xffffa0c20d695888: &parent->list_lock
0xffffa0c278775278: (null)
0xffffa0c212ad4690: &dentry->d_lockref.lock
After:
# perf lock info -m
Address of instance: name of class
0xffffa0c20d538800: &(&sig->stats_lock)->lock
0xffffa0c216d4ec40: &(&sig->stats_lock)->lock
0xffffa1fe4cb04610: &(__futex_data.queues)[i].lock
0xffffa1fe4cb07750: &(__futex_data.queues)[i].lock
0xffffa1fe4cb07b50: &(__futex_data.queues)[i].lock
0xffffa1fe4cb0b850: &(__futex_data.queues)[i].lock
0xffffa1fe4cb0bcd0: &(__futex_data.queues)[i].lock
0xffffa1fe4cb0e5d0: &(__futex_data.queues)[i].lock
0xffffa1fe4cb11ad0: &(__futex_data.queues)[i].lock
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127000050.3011493-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As evsel__intval() returns u64, we can just use it as is.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127000050.3011493-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The hlist_head has a single entry so we can save some memory.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127000050.3011493-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Likewise, it should use a proper name in case the task runs under
chroot.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When reading build-id from a DSO, it should consider if it's from a
chroot task. In that case, the path is different so it needs to prepend
the root directory to access the file correctly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently it doesn't handle tasks in chroot properly. As filenames in
MMAP records base on their root directory, it's different than what perf
tool can see from outside.
Add filename_with_chroot() helper to deal with those cases. The
function returns a new filename only if it's in a different root
directory. Since it needs to access /proc for the process, it only
works until the task exits.
With this change, I can see symbols in my program like below.
# perf record -o- chroot myroot myprog 3 | perf report -i-
...
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .............................
#
99.83% myprog myprog [.] loop
0.04% chroot [kernel.kallsyms] [k] fxregs_fixup
0.04% chroot [kernel.kallsyms] [k] rsm_load_seg_32
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Otherwise, this test does not find the sysctl entry in place:
sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_tcp_loose: No such file or directory
iperf3: error - unable to send control message: Bad file descriptor
FAIL: iperf3 returned an error
Fixes: 7152303cbec4 ("selftests: netfilter: add synproxy test")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Test TIMESTAMPING and TXTIME across UDP / ICMP and IP versions.
Before ICMPv6 support:
# ./tools/testing/selftests/net/cmsg_time.sh
Case ICMPv6 - ts cnt returned '0', expected '2'
Case ICMPv6 - ts0 SCHED returned '', expected 'OK'
Case ICMPv6 - ts0 SND returned '', expected 'OK'
Case ICMPv6 - TXTIME abs returned '', expected 'OK'
Case ICMPv6 - TXTIME rel returned '', expected 'OK'
FAIL - 5/36 cases failed
After:
# ./tools/testing/selftests/net/cmsg_time.sh
OK
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support requesting Tx timestamps:
$ ./cmsg_sender -p i -t -4 $tgt 123 -d 1000
SCHED ts0 61us
SND ts0 1071us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ability to send delayed packets.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
