| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
auxtrace:
Adrian Hunter:
- Fix endless record after being terminated on arm-spe.
Wei Li:
- Fix endless record after being terminated on Intel PT and BTS and
on ARM's cs-etm.
perf test:
Thomas Richter
- Fix test trace+probe_vfs_getname.sh on s390
PowerPC:
Arnaldo Carvalho de Melo:
- Sync powerpc syscall.tbl with the kernel sources.
BPF:
Arnaldo Carvalho de Melo:
- Remove extraneous bpf/ subdir from bpf.h headers used to build bpf events.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add a specific test for the crash reported by Phil Sutter and addressed
in the previous patch. The test cases that, in my intention, should
have covered these cases, that is, the ones from the 'concurrency'
section, don't run these sequences tightly enough and spectacularly
failed to catch this.
While at it, define a convenient way to add these kind of tests, by
adding a "reported issues" test section.
It's more convenient, for this particular test, to execute the set
setup in its own function. However, future test cases like this one
might need to call setup functions, and will typically need no tools
other than nft, so allow for this in check_tools().
The original form of the reproducer used here was provided by Phil.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Due to various bugs in tests clean up code (usually), if host system is
misconfigured, it happens that test_progs will just crash in the middle of
running a test with little to no indication of where and why the crash
happened. For cases where coredump is not readily available (e.g., inside
a CI), it's very helpful to have a stack trace, which lead to crash, to be
printed out. This change adds a signal handler that will capture and print out
symbolized backtrace:
$ sudo ./test_progs -t mmap
test_mmap:PASS:skel_open_and_load 0 nsec
test_mmap:PASS:bss_mmap 0 nsec
test_mmap:PASS:data_mmap 0 nsec
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x18)[0x42a888]
/lib64/libpthread.so.0(+0xf5d0)[0x7f2aab5175d0]
./test_progs(test_mmap+0x3c0)[0x41f0a0]
./test_progs(main+0x160)[0x407d10]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x7f2aab15d3d5]
./test_progs[0x407ebc]
[1] 1988412 segmentation fault (core dumped) sudo ./test_progs -t mmap
Unfortunately, glibc's symbolization support is unable to symbolize static
functions, only global ones will be present in stack trace. But it's still a
step forward without adding extra libraries to get a better symbolization.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225000847.3965188-1-andriin@fb.com
|
|
Extend existing devlink trap test to include metadata type for flow
action cookie.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before nftables commit fb9cea50e8b3 ("main: enforce options before
commands"), 'nft list ruleset -a' happened to work, but it's wrong
and won't work anymore. Replace it by 'nft -a list ruleset'.
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently we run SYN cookies test for all socket types and mark the test as
skipped if socket type is not compatible. This causes confusion because
skipped test might indicate a problem with the testing environment.
Instead, run the test only for the socket type which supports SYN cookies.
Also, switch to using designated initializers when setting up tests, so
that we can tweak only some test parameters, leaving the rest initialized
to default values.
Fixes: eecd618b4516 ("selftests/bpf: Mark SYN cookie test skipped for UDP sockets")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200224135327.121542-2-jakub@cloudflare.com
|
|
SOCKMAP and SOCKHASH map types can be used with reuseport BPF programs but
don't support yet storing UDP sockets. Instead of marking UDP tests with
SOCK{MAP,HASH} as skipped, don't run them at all.
Skipped test might signal that the test environment is not suitable for
running the test, while in reality the functionality is not implemented in
the kernel yet.
Before:
sh# ./test_progs -t select_reuseport
…
#40 select_reuseport:OK
Summary: 1/126 PASSED, 30 SKIPPED, 0 FAILED
After:
sh# ./test_progs -t select_reuseport
…
#40 select_reuseport:OK
Summary: 1/98 PASSED, 2 SKIPPED, 0 FAILED
The remaining two skipped tests are SYN cookies tests, which will be
addressed in the subsequent patch.
Fixes: 11318ba8cafd ("selftests/bpf: Extend SK_REUSEPORT tests to cover SOCKMAP/SOCKHASH")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200224135327.121542-1-jakub@cloudflare.com
|
|
Add a test to check functionality of ACL traps.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the helpers assume pref 1 and handle 101. Make that explicit
and pass the values from callers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include test of forbidding to have drop rule on mixed-bound
shared block.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While userfaultfd, KVM's demand paging implementation, is not specific
to KVM, having a benchmark for its performance will be useful for
guiding performance improvements to KVM. As a first step towards creating
a userfaultfd demand paging test, create a simple memory access test,
based on dirty_log_test.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Guests and hosts don't have to have the same page size. This means
calculations are necessary when selecting the number of guest pages
to allocate in order to ensure the number is compatible with the
host. Provide utilities to help with those calculations and apply
them where appropriate.
We also revert commit bffed38d4fb5 ("kvm: selftests: aarch64:
dirty_log_test: fix unaligned memslot size") and then use
vm_adjust_num_guest_pages() there instead.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This array will allow us to easily translate modes to their parameter
values.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We're going to want this name in the library code, so use a shorter
name in the tests.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
BITS_PER_LONG and friends are provided by linux/bitops.h
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
I'm not sure how we ended up using printf instead of fprintf in
virt_dump(). Fix it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-02-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 25 non-merge commits during the last 4 day(s) which contain
a total of 33 files changed, 2433 insertions(+), 161 deletions(-).
The main changes are:
1) Allow for adding TCP listen sockets into sock_map/hash so they can be used
with reuseport BPF programs, from Jakub Sitnicki.
2) Add a new bpf_program__set_attach_target() helper for adding libbpf support
to specify the tracepoint/function dynamically, from Eelco Chaudron.
3) Add bpf_read_branch_records() BPF helper which helps use cases like profile
guided optimizations, from Daniel Xu.
4) Enable bpf_perf_event_read_value() in all tracing programs, from Song Liu.
5) Relax BTF mandatory check if only used for libbpf itself e.g. to process
BTF defined maps, from Andrii Nakryiko.
6) Move BPF selftests -mcpu compilation attribute from 'probe' to 'v3' as it has
been observed that former fails in envs with low memlock, from Yonghong Song.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflict resolution of ice_virtchnl_pf.c based upon work by
Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that SOCKMAP and SOCKHASH map types can store listening sockets,
user-space and BPF API is open to a new set of potential pitfalls.
Exercise the map operations, with extra attention to code paths susceptible
to races between map ops and socket cloning, and BPF helpers that work with
SOCKMAP/SOCKHASH to gain confidence that all works as expected.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200218171023.844439-12-jakub@cloudflare.com
|
|
Parametrize the SK_REUSEPORT tests so that the map type for storing sockets
is not hard-coded in the test setup routine.
This, together with careful state cleaning after the tests, lets us run the
test cases for REUSEPORT_ARRAY, SOCKMAP, and SOCKHASH to have test coverage
for all supported map types. The last two support only TCP sockets at the
moment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200218171023.844439-11-jakub@cloudflare.com
|
|
In order for sockmap/sockhash types to become generic collections for
storing TCP sockets we need to loosen the checks during map update, while
tightening the checks in redirect helpers.
Currently sock{map,hash} require the TCP socket to be in established state,
which prevents inserting listening sockets.
Change the update pre-checks so the socket can also be in listening state.
Since it doesn't make sense to redirect with sock{map,hash} to listening
sockets, add appropriate socket state checks to BPF redirect helpers too.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200218171023.844439-5-jakub@cloudflare.com
|
|
Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
|
|
The commits introducing 'mlock-random-test'[1], 'map_fiex_noreplace'[2],
and 'thuge-gen'[3] have not added those in the 'run_vmtests' script and
thus the 'run_tests' command of kselftests doesn't run those. This
commit adds those in the script.
'gup_benchmark' and 'transhuge-stress' are also not included in the
'run_vmtests', but this commit does not add those because those are for
performance measurement rather than pass/fail tests.
[1] commit 26b4224d9961 ("selftests: expanding more mlock selftest")
[2] commit 91cbacc34512 ("tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE")
[3] commit fcc1f2d5dd34 ("selftests: add a test program for variable huge page sizes in mmap/shmget")
Link: http://lkml.kernel.org/r/20200206085144.29126-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add append value operator "+=" support to bootconfig syntax.
With this operator, user can add new value to the key as
an entry of array instead of overwriting.
For example,
foo = bar
...
foo += baz
Then the key "foo" has "bar" and "baz" values as an array.
Link: http://lkml.kernel.org/r/158227283195.12842.8310503105963275584.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Currently, bootconfig adds a new value on the existing key to the tail of an
array. But this looks a bit confusing because an admin can easily rewrite
the original value in the same config file.
This rejects the following value re-definition.
key = value1
...
key = value2
You should rewrite value1 to value2 in this case.
Link: http://lkml.kernel.org/r/158227282199.12842.10110929876059658601.stgit@devnote2
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Fixed spelling of arraies to arrays ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
A recent clang change, combined with a binutils bug, can trigger a
situation where a ".Lprintk$local" STT_NOTYPE symbol gets created at the
same offset as the "printk" STT_FUNC symbol. This confuses objtool:
kernel/printk/printk.o: warning: objtool: ignore_loglevel_setup()+0x10: can't find call dest symbol at .text+0xc67
Improve the call destination detection by looking specifically for an
STT_FUNC symbol.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/872
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25551
Link: https://lkml.kernel.org/r/0a7ee320bc0ea4469bd3dc450a7b4725669e0ea9.1581997059.git.jpoimboe@redhat.com
|
|
Clang has the ability to create a switch table which is not a jump
table, but is rather a table of string pointers. This confuses objtool,
because it sees the relocations for the string pointers and assumes
they're part of a jump table:
drivers/ata/sata_dwc_460ex.o: warning: objtool: sata_dwc_bmdma_start_by_tag()+0x3a2: can't find switch jump table
net/ceph/messenger.o: warning: objtool: ceph_con_workfn()+0x47c: can't find switch jump table
Make objtool's find_jump_table() smart enough to distinguish between a
switch jump table (which has relocations to text addresses in the same
function as the original instruction) and other anonymous rodata (which
may have relocations to elsewhere).
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/485
Link: https://lkml.kernel.org/r/263f6aae46d33da0b86d7030ced878cb5cab1788.1581997059.git.jpoimboe@redhat.com
|
|
Libbpf's Travis CI tests caught this issue. Ensure bpf_link and bpf_object
clean up is performed correctly.
Fixes: d633d57902a5 ("selftest/bpf: Add test for allowed trampolines count")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20200220230546.769250-1-andriin@fb.com
|
|
Use the new bpf_program__set_attach_target() API in the xdp_bpf2bpf
selftest so it can be referenced as an example on how to use it.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/158220520562.127661.14289388017034825841.stgit@xdp-tutorial
|
|
Currently when you want to attach a trace program to a bpf program
the section name needs to match the tracepoint/function semantics.
However the addition of the bpf_program__set_attach_target() API
allows you to specify the tracepoint/function dynamically.
The call flow would look something like this:
xdp_fd = bpf_prog_get_fd_by_id(id);
trace_obj = bpf_object__open_file("func.o", NULL);
prog = bpf_object__find_program_by_title(trace_obj,
"fentry/myfunc");
bpf_program__set_expected_attach_type(prog, BPF_TRACE_FENTRY);
bpf_program__set_attach_target(prog, xdp_fd,
"xdpfilt_blk_all");
bpf_object__load(trace_obj)
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158220519486.127661.7964708960649051384.stgit@xdp-tutorial
|
|
New development cycles starts, bump to v0.0.8.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158220518424.127661.8278643006567775528.stgit@xdp-tutorial
|
|
This commit enables the KCSAN Kconfig options that (1) detect data
races between reads and writes even when the writes do not change the
variable's value and (2) detect data races involving plain C-language
writes. These changes only affect scripted rcutorture runs and can be
overridden using the kvm.sh --kconfig argument.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, kvm-find-errors.sh gives a usage prompt when given a bad
directory, but then soldiers on, giving a series of confusing error
messages. This commit therefore prints an error message and exits when
given a bad directory, hopefully reducing confusion.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When running the default list of tests, the run summary of a successful
(that is, failed to find any errors) run fits easily on a 24-line screen.
But a run with something like "--configs '5*CFLIST'" will be 80 lines long,
and it is all too easy to miss a failure message when scrolling back.
This commit therefore prints out the number of runs with failing builds
or runtime failures, but only if there are any such failures.
For example, a run with a single build error and a single runtime error
would print two lines like this:
1 runs with build errors.
1 runs with runtime errors.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The small-system rcutorture configurations have served us well for a great
many years, but it is now time to add a larger one. This commit does
just that, but does not add it to the defaults in CFLIST. This allows
the kvm.sh argument '--configs "4*CFLIST TREE10" to run four instances
of each of the default configurations concurrently with one instance of
the large configuration.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The names of the per-test results directories are of the form
2019.11.29-20:42:19. This works, but the ":" characters make
tab-based shell name completion a bit onerous because the user must
remember to include a quote character somewhere before the first ":".
This commit therefore changes the ":" characters to periods, as in
2019.12.01-20.48.01", which allows tab-based completion to work more
naturally.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The bootparam_hotplug_cpu() bash function was checking for CPU-hotplug
kernel-boot parameters from --bootargs, but that check was specific to
rcutorture ("rcutorture\.onoff_"). This commit therefore makes this
check also work for locktorture ("torture\.onoff_").
Note that rcuperf does not do CPU-hotplug operations, so it is not
necessary to make a similar change for rcuperf.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Reject if a value node is mixed with subkey node on same
parent key node.
A value node can not co-exist with subkey node under some key
node, e.g.
key = value
key.subkey = another-value
This is not be allowed because bootconfig API is not designed
to handle such case.
Link: http://lkml.kernel.org/r/158220115232.26565.7792340045009731803.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Remove error message silent knob, we don't need it anymore
because we can check if there is a bootconfig by checking
the magic word.
If there is a magic word, but failed to load a bootconfig
from initrd, there is a real problem.
Link: http://lkml.kernel.org/r/158220113256.26565.14264598654427773104.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add bootconfig magic word to the end of bootconfig on initrd
image for indicating explicitly the bootconfig is there.
Also tools/bootconfig treats wrong size or wrong checksum or
parse error as an error, because if there is a bootconfig magic
word, there must be a bootconfig.
The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word.
Thus the block image of the initrd file with bootconfig is
as follows.
[Initrd][bootconfig][size][csum][#BOOTCONFIG\n]
Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If BPF program is using BTF-defined maps, BTF is required only for
libbpf itself to process map definitions. If after that BTF fails to
be loaded into kernel (e.g., if it doesn't support BTF at all), this
shouldn't prevent valid BPF program from loading. Existing
retry-without-BTF logic for creating maps will succeed to create such
maps without any problems. So, presence of .maps section shouldn't make
BTF required for kernel. Update the check accordingly.
Validated by ensuring simple BPF program with BTF-defined maps is still
loaded on old kernel without BTF support and map is correctly parsed and
created.
Fixes: abd29c931459 ("libbpf: allow specifying map definitions using BTF")
Reported-by: Julia Kartseva <hex@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200220062635.1497872-1-andriin@fb.com
|
|
Currently if you build with O=... the rseq tests don't build:
$ make O=$PWD/output -C tools/testing/selftests/ TARGETS=rseq
make: Entering directory '/linux/tools/testing/selftests'
...
make[1]: Entering directory '/linux/tools/testing/selftests/rseq'
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -shared -fPIC rseq.c -lpthread -o /linux/output/rseq/librseq.so
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_test.c -lpthread -lrseq -o /linux/output/rseq/basic_test
/usr/bin/ld: cannot find -lrseq
collect2: error: ld returned 1 exit status
This is because the library search path points to the source
directory, not the output.
We can fix it by changing the library search path to $(OUTPUT).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") added a 45 second timeout for tests, and also added
a way for tests to customise the timeout via a settings file.
For example the ftrace tests take multiple minutes to run, so they
were given longer in commit b43e78f65b1d ("tracing/selftests: Turn off
timeout setting").
This works when the tests are run from the source tree. However if the
tests are installed with "make -C tools/testing/selftests install",
the settings files are not copied into the install directory. When the
tests are then run from the install directory the longer timeouts are
not applied and the tests timeout incorrectly.
So add the settings files to TEST_FILES of the appropriate Makefiles
to cause the settings files to be installed using the existing install
logic.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to build failures and other test bugs"
* tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: openat2: fix build error on newer glibc
selftests: use LDLIBS for libraries instead of LDFLAGS
selftests: fix too long argument
selftests: allow detection of build failures
Kernel selftests: tpm2: check for tpm support
selftests/ftrace: Have pid filter test use instance flag
selftests: fix spelling mistaked "chaigned" -> "chained"
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-02-19
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 93 insertions(+), 31 deletions(-).
The main changes are:
1) batched bpf hashtab fixes from Brian and Yonghong.
2) various selftests and libbpf fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added tests for 'u32' extended match rules for u8 alignment.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The selftests fails to build with:
tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c: In function ‘test_sockmap_ktls_disconnect_after_delete’:
tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c:72:37: error: ‘TCP_ULP’ undeclared (first use in this function)
72 | err = setsockopt(cli, IPPROTO_TCP, TCP_ULP, "tls", strlen("tls"));
| ^~~~~~~
Similar to commit that fixes build of sockmap_basic.c on systems with old
/usr/include fix the build of sockmap_ktls.c
Fixes: d1ba1204f2ee ("selftests/bpf: Test unhashing kTLS socket after removing from map")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200219205514.3353788-1-ast@kernel.org
|
