| Age | Commit message (Collapse) | Author |
|---|
|
Prepare for bucket resume tests for established TCP sockets by creating
established sockets. Collect socket fds from connect() and accept()
sides and pass them to test cases.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
|
|
Prepare for bucket resume tests for established TCP sockets by making
the number of ehash buckets configurable. Subsequent patches force all
established sockets into the same bucket by setting ehash_buckets to
one.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
|
|
Starting with Rust 1.89.0 (expected 2025-08-07), under
`CONFIG_RUST_DEBUG_ASSERTIONS=y`, `objtool` may report:
rust/kernel.o: warning: objtool: _R..._6kernel4pageNtB5_4Page8read_raw()
falls through to next function _R..._6kernel4pageNtB5_4Page9write_raw()
(and many others) due to calls to the `noreturn` symbol:
core::panicking::panic_nounwind_fmt
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250712160103.1244945-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add parentheses around loopback address check to fix up logic and make
the socket state filter configurable for the TCP socket iterators.
Iterators can skip the socket state check by setting ss to 0.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
|
|
Prepare to test TCP socket iteration over both listening and established
sockets by allowing the BPF iterator programs to skip the port check.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
|
|
Replicate the set of test cases used for UDP socket iterators to test
similar scenarios for TCP listening sockets.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
|
|
Avoid merge conflicts
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
The selftest doesn't cover this error path:
scratch = *raw_cpu_ptr(m->scratch);
if (unlikely(!scratch)) { // here
cover this too.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Previous patch added a new clash resolution test case.
Also use this during conntrack resize stress test in addition
to icmp ping flood.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a dedicated test to exercise conntrack clash resolution path.
Test program emits 128 identical udp packets in parallel, then reads
back replies from socat echo server.
Also check (via conntrack -S) that the clash path was hit at least once.
Due to the racy nature of the test its possible that despite the
threaded program all packets were processed in-order or on same cpu,
emit a SKIP warning in this case.
Two tests are added:
- one to test the simpler, non-nat case
- one to exercise clash resolution where packets
might have different nat transformations attached to them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Extend the resize test:
- continuously dump table both via /proc and ctnetlink interfaces while
table is resized in a loop.
- if socat is available, send udp packets in additon to ping requests.
- increase/decrease the icmp and udp timeouts while resizes are happening.
This makes sure we also exercise the 'ct has expired' check that happens
on conntrack lookup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
dl_rq bandwidth accounting information is crucial for the correct
functioning of SCHED_DEADLINE.
Add a drgn script for accessing that information at runtime, so that
it's easier to check and debug issues related to it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b
Link: https://lore.kernel.org/r/20250627115118.438797-6-juri.lelli@redhat.com
|
|
Root domains information is somewhat hard to access at runtime. Even
with sched_debug and sched_verbose, such information is only printed
on kernel console when domains are modified.
Add a simple drgn script to more easily retrieve root domains
information at runtime.
Since tools/sched is a new directory, add it to MAINTAINERS as well.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b
Link: https://lore.kernel.org/r/20250627115118.438797-5-juri.lelli@redhat.com
|
|
There are many same pattern of 8 + BOOTCONFIG_MAGIC_LEN for calculating
the size of bootconfig footer. Use BOOTCONFIG_FOOTER_SIZE macro to
clean up those magic numbers.
Link: https://lore.kernel.org/all/175211425693.2591046.16029516706923643510.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Since echo is not portable, use printf instead. This fixes a wrong
test result formatting in some environment. (showing "\t\t[OK]")
Also this uses printf command for generating test data instead of
echo.
Link: https://lore.kernel.org/all/175211424942.2591046.5439447789303314213.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Since 'stat' command and 'truncate' command are GNU extension,
use 'wc' and 'dd' commands instead.
Link: https://lore.kernel.org/all/175211424184.2591046.3523297993175066026.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
As suggested, changed the square brackets escaping to quote the whole Regex
class.
Link: https://lore.kernel.org/all/20250709030141.27483-1-unixbhaskar@gmail.com/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Assert that mremap() behaviour is as expected when moving around unfaulted
VMAs immediately adjacent to faulted ones, as well as moving around
faulted VMAs and placing them back immediately adjacent to the VMA from
which they were moved.
This also introduces a shared helper for the syscall version of mremap()
so we don't encounter any issues with libc filtering parameters.
Link: https://lkml.kernel.org/r/20250702084717.21360-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add DAMON sysfs interface functionality tests for basic DAMOS schemes
parameters setup.
Link: https://lkml.kernel.org/r/20250628160428.53115-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add DAMON sysfs interface functionality tests for setup of basic adaptive
targets parameters.
Link: https://lkml.kernel.org/r/20250628160428.53115-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add DAMON sysfs interface functionality tests for DAMON monitoring
attribute parameters, including intervals, intervals tuning goals, and
min/max number of regions.
Link: https://lkml.kernel.org/r/20250628160428.53115-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a python-written DAMON sysfs functionality selftest. It sets DAMON
parameters using Python module _damon_sysfs, reads updated kernel internal
DAMON status and parameters using a 'drgn' script, namely
drgn_dump_damon_status.py, and compare if the resulted DAMON internal
status is as expected. The test is very minimum at the moment.
Link: https://lkml.kernel.org/r/20250628160428.53115-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
_damon_sysfs.py is a Python module for reading and writing DAMON sysfs for
testing. It is not reading resulting kdamond pids. Read and update those
when starting kdamonds.
Link: https://lkml.kernel.org/r/20250628160428.53115-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: add python and drgn based DAMON sysfs
functionality tests".
DAMON sysfs interface is the bridge between the user space and the kernel
space for DAMON parameters. There is no good and simple test to see if
the parameters are set as expected. Existing DAMON selftests therefore
test end-to-end features. For example, damos_quota_goal.py runs a DAMOS
scheme with quota goal set against a test program running an artificial
access pattern, and see if the result is as expected. Such tests cover
only a few part of DAMON. Adding more tests is also complicated.
Finally, the reliability of the test itself on different systems is bad.
'drgn' is a tool that can extract kernel internal data structures like
DAMON parameters. Add a test that passes specific DAMON parameters via
DAMON sysfs reusing _damon_sysfs.py, extract resulting DAMON parameters
via 'drgn', and compare those. Note that this test is not adding
exhaustive tests of all DAMON parameters and input combinations but very
basic things. Advancing the test infrastructure and adding more tests are
future works.
This patch (of 6):
'drgn' is a useful tool for extracting kernel internal data structures
such as DAMON's parameter and running status. Add a 'drgn' script that
extracts such DAMON internal data at runtime, for using it as a tool for
seeing if a test input has made expected results in the kernel.
The script saves or prints out the DAMON internal data as a json file or
string. This is for making use of it not very depends on 'drgn'. If
'drgn' is not available on a test setup and we find alternative tools for
doing that, the json-based tests can be updated to use an alternative tool
in future.
Note that the script is tested with 'drgn v0.0.22'.
Link: https://lkml.kernel.org/r/20250628160428.53115-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250628160428.53115-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We default to raising an exception when unknown attrs are found
to make sure those are noticed during development.
When YNL CLI is "installed" and used by sysadmins erroring out
is not going to be helpful. It's far more likely the user space
is older than the kernel in that case, than that some attr is
misdefined or missing.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Update Kirill's email address
- Allow hugetlb PMD sharing only on 64-bit as it doesn't make a whole
lotta sense on 32-bit
- Add fixes for a misconfigured AMD Zen2 client which wasn't even
supposed to run Linux
* tag 'x86_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Update Kirill Shutemov's email address for TDX
x86/mm: Disable hugetlb page table sharing on 32-bit
x86/CPU/AMD: Disable INVLPGB on Zen2
x86/rdrand: Disable RDSEED on AMD Cyan Skillfish
|
|
Nolibc supports the x32 ABI on x86.
Add a testcase to make sure the support stays functional.
QEMU user does not have support for x32, so skip the test there.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250712-nolibc-x32-v1-2-6d81cb798710@weissschuh.net
|
|
Nolibc assumes that the kernel ABI is using a time values that are as
large as a long integer. For most ABIs this holds true.
But for x32 this is not correct, as it uses 32bit longs but 64bit times.
Also the 'struct stat' implementation of nolibc relies on timespec::tv_sec
and time_t being the same type. While timespec::tv_sec comes from the
kernel and is of type __kernel_old_time_t, time_t is defined within nolibc.
Switch to the __kernel_old_time_t to always get the correct type.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250712-nolibc-x32-v1-1-6d81cb798710@weissschuh.net
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
Extend the process_unknown handing to enum values and flags.
Tested by removing entries from rt-link.yaml and rt-neigh.yaml:
./tools/net/ynl/pyynl/cli.py --family rt-link --dump getlink \
--process-unknown --output-json | jq '.[0] | ."ifi-flags"'
[
"up",
"Unknown(6)",
"loopback",
"Unknown(16)"
]
./tools/net/ynl/pyynl/cli.py --family rt-neigh --dump getneigh \
--process-unknown --output-json | jq '.[] | ."ndm-type"'
"unicast"
"Unknown(5)"
"Unknown(5)"
"unicast"
"Unknown(5)"
"unicast"
"broadcast"
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzbot found a buffer underflow in __hid_request(). Add a related test
case for it.
It's not perfect, but it allows to catch a corner case when a report
descriptor is crafted so that it has a size of 0.
Link: https://patch.msgid.link/20250710-report-size-null-v2-4-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
are required for a merge of the series "mm: folio_pte_batch()
improvements".
|
|
Fixes malformed test output due to missing newline
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The test_kmem_dead_cgroups test currently assumes that RCU and
memory reclaim will complete within 5 seconds. In some environments
this timeout may be insufficient, leading to spurious test failures.
This patch introduces max_time set to 20 which is then used in the
test. After 5th sec the debug message is printed to indicate the
cleanup is still ongoing.
In the system under test with 16 CPUs the original test was failing
most of the time and the cleanup time took usually approx. 6sec.
Further tests were conducted with and without do_rcu_barrier and the
results (respectively) are as follow:
quantiles 0 0.25 0.5 0.75 1
1 2 3 8 20 (mean = 4.7667)
3 5 8 8 20 (mean = 7.6667)
Acked-by: Michal Koutny <mkoutny@suse.com>
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
|
|
Three tests are cooking GSO packets but do not provide
gso_size information to the kernel, triggering this message:
TCP: tun0: Driver has suspect GRO implementation, TCP performance may be compromised.
Add --mss option to avoid this warning.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250710155641.3028726-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new test script to the network selftests which tests getting and
setting of layer 2 addresses through netlink, including the newly added
support for setting a permaddr on netdevsim devices.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250710-netdevsim-perm_addr-v4-2-c9db2fecf3bf@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The iou-zcrx selftest currently runs the server on the remote host
and the client on the local host. This commit flips the endpoints
such that server runs on localhost and client on remote.
This change brings the iou-zcrx selftest in convention with other
selftests.
Drive-by fix for a missing import exception that happens when the
network interface has less than 2 combined channels.
Test plan: ran iou-zcrx.py selftest between 2 physical machines
Signed-off-by: Vishwanath Seshagiri <vishs@fb.com>
Link: https://patch.msgid.link/20250710165337.614159-1-vishs@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that a duplicating netem cannot exist in a tree with other netems
in both qdisc addition and change. This is meant to prevent the soft
lockup and OOM loop scenario discussed in [1]. Also adjust a HFSC's
re-entrancy test case with netem for this new restriction - KASAN
still triggers upon its failure.
[1] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250708164219.875521-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Returning NULL for out of bound CPU or thread map items causes
internal errors. Fix by correctly setting the error to be an index
error.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-14-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The struct pyrf_evlist embeds the evlist requiring the copying from
things like parsed events. The copying logic handles the leader being
the event itself, but if the leader group event is a different in the
list it will cause an evsel to point to the evsel in the list that was
copied from which is bad. Fix this by adding another pass over the
evlist rewriting leaders, simplified by the introductin of two evlist
helpers.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-13-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Tool PMUs assume that stat's process_counter_values is being used to
read the counters. Specifically they hold onto old values in
evsel->prev_raw_counts and give the cumulative count based off of this
value. Update pyrf_evsel__read to allocate counts and prev_raw_counts,
use evsel__read_counter rather than perf_evsel__read so tool PMUs are
read from not just perf_event_open events, make the returned
pyrf_counts_values contain the delta value rather than the cumulative
value.
Fixes: 739621f65702 ("perf python: Add evsel read method")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-12-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The CPU index is incorrectly checked rather than the thread index.
Fixes: 739621f65702 ("perf python: Add evsel read method")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The evsel__pmu_name helper will internally use evsel__find_pmu that
handles legacy events, extended types, etc. in determining a PMU and
will provide a better value than just trying to access the PMU's name
directly as the PMU may not have been computed.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If the short and long descriptions are the same then save space and
don't store both of them. When storing the desc in the perf_pmu_alias,
don't duplicate the desc into the long_desc.
By avoiding storing the duplicate the size of the events string in the
binary on x86 is reduced by 29,840 bytes.
Fix tests that expect a duplicated description.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Metrics will fill in the context to have mappings from an event to a
count. When counts are added they replace existing mappings which
generally shouldn't exist with aggregation. Switch to accumulating to
better support cases where perf stat's aggregation isn't used and we
may see a counter more than once.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The rblist of metric_event that then have a list of associated
metric_expr is moved out of the stat_config and into the evlist. This
is done as part of refactoring things for python, having the state
split in two places complicates that implementation. The evlist is
doing the harder work of enabling and disabling events, the metrics
are needed to compute a value and it doesn't seem unreasonable to hang
them from the evlist.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Factor metricgroup__for_each_metric into its own function handling
regular and sys metrics. Make the metric adding and printing code use
it, move the printing code into print-events files.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If sysfs isn't mounted then we may fail to read a PMU's type. In this
situation resort to lookup of wellknown types. Only applies to
software, tracepoint and breakpoint PMUs.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
scnprintf is declared in linux/kernel.h, directly depend upon it.
Add missing SPDX comments.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add missing breakpoint and raw types. Avoid a switch, just use a
lookup array. Switch the type to unsigned to avoid checking negative
values.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
