| Age | Commit message (Collapse) | Author |
|---|
|
It needs callstacks for two reasons:
* for stack aggregation mode, the map key is the stack id and it can
also show the full stack traces when -v is used
* for other aggregation modes, the stack filter can be used to limit
lock contentions from known call paths
The -v option is meaningful (in terms of stack trace) only for stack
aggregation mode, so it should not set the save_callstack for other
mode like with -t or -l options.
I've noticed this with the following command line:
$ sudo ./perf lock con -ablv -E 3 -M 16 -- ./perf bench sched messaging
...
contended total wait max wait avg wait address symbol
88 4.59 ms 108.07 us 52.13 us ffff935757f46ec0 (spinlock)
33 905.22 us 73.67 us 27.43 us ffff935757f41700 (spinlock)
28 703.69 us 79.28 us 25.13 us ffff938a3d9b0c80 rq_lock (spinlock)
=== output for debug ===
bad: 12272, total: 12421
bad rate: 98.80 %
histogram of failure reasons
task: 8285
stack: 3987 <---------- here
time: 0
data: 0
It should not have any failure on stacks since it doesn't use it.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230406210611.1622492-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When -E option is used, it only prints the given number of entries but
the event stat at the end should have the numbers for entire entries.
Likewise, -S option will hide entries that don't have the named
function in the callstack. Also update event stat for them.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230406210611.1622492-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's possible to fail to update the data when the lock_stat map is full.
We should check that case and show the number at the end.
$ sudo ./perf lock con -ablv -E3 -- ./perf bench sched messaging
...
contended total wait max wait avg wait address symbol
6157 208.48 ms 69.29 us 33.86 us ffff934c001c1f00 (spinlock)
4030 72.04 ms 61.84 us 17.88 us ffff934c000415c0 (spinlock)
3201 50.30 ms 47.73 us 15.71 us ffff934c2eead850 (spinlock)
=== output for debug ===
bad: 0, total: 13388
bad rate: 0.00 %
histogram of failure reasons
task: 0
stack: 0
time: 0
data: 0 <----- added
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230406210611.1622492-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The BPF hash map will align the map size to a power of 2. So 10k would
be 16k anyway. Let's have the actual size to avoid confusions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230406210611.1622492-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Users often want to change the map size, let's add a short option (-M)
for that.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230406210611.1622492-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The get_type_flag() should check both str and name fields in the
lock_type_table so that it can find the appropriate flag without retrying
with ':R' or ':W' suffix from the caller.
Also fix a typo in the rt-mutex.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230406210611.1622492-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename the fallthrough attribute to better align with the kernel
version. Copy the definition from include/linux/compiler_attributes.h
including the #else clause. Adding the #else clause allows the tools
compiler.h header to drop the check for a definition entirely and keeps
both definitions together.
Change any __fallthrough statements to fallthrough anywhere it was used
within perf.
This allows other tools to use the same key word as the kernel.
Committer notes:
Did some missing conversions to:
builtin-list.c
Also included gtk.h before the 'fallthrough' definition in:
tools/perf/ui/gtk/hists.c
tools/perf/ui/gtk/helpline.c
tools/perf/ui/gtk/browser.c
As it is the arg name for a macro in glib.h:
/var/home/acme/git/perf-tools-next/tools/include/linux/compiler-gcc.h:16:55: error: missing binary operator before token "("
16 | # define fallthrough __attribute__((__fallthrough__))
| ^
/usr/include/glib-2.0/glib/gmacros.h:637:28: note: in expansion of macro ‘fallthrough’
637 | #if g_macro__has_attribute(fallthrough)
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tom Rix <trix@redhat.com>
Cc: linux-sparse@vger.kernel.org <linux-sparse@vger.kernel.org>
Cc: llvm@lists.linux.dev <llvm@lists.linux.dev>
Link: https://lore.kernel.org/r/20221125154947.2163498-1-Liam.Howlett@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ensure fd is closed on error paths.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230406065224.2553640-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By default bison uses global state for compatibility with yacc. Make
the parser reentrant so that it may be used in asynchronous and
multithreaded situations.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230406065224.2553640-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
<non_const>'
Add various tests for code pattern '<const> <cond_op> <non_const>' to
exercise the previous verifier patch.
The following are veristat changed number of processed insns stat
comparing the previous patch vs. this patch:
File Program Insns (A) Insns (B) Insns (DIFF)
----------------------------------------------------- ---------------------------------------------------- --------- --------- -------------
test_seg6_loop.bpf.linked3.o __add_egr_x 12423 12314 -109 (-0.88%)
Only one program is affected with minor change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164510.1047757-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, the verifier does not handle '<const> <cond_op> <non_const>' well.
For example,
...
10: (79) r1 = *(u64 *)(r10 -16) ; R1_w=scalar() R10=fp0
11: (b7) r2 = 0 ; R2_w=0
12: (2d) if r2 > r1 goto pc+2
13: (b7) r0 = 0
14: (95) exit
15: (65) if r1 s> 0x1 goto pc+3
16: (0f) r0 += r1
...
At insn 12, verifier decides both true and false branch are possible, but
actually only false branch is possible.
Currently, the verifier already supports patterns '<non_const> <cond_op> <const>.
Add support for patterns '<const> <cond_op> <non_const>' in a similar way.
Also fix selftest 'verifier_bounds_mix_sign_unsign/bounds checks mixing signed and unsigned, variant 10'
due to this change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164505.1046801-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add various tests for code pattern '<non-const> NE/EQ <const>' implemented
in the previous verifier patch. Without the verifier patch, these new
tests will fail.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164500.1045715-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Verify that disabling the guest's vPMU via CPUID also disables LBRs.
KVM has had at least one bug where LBRs would remain enabled even though
the intent was to disable everything PMU related.
Link: https://lore.kernel.org/r/20230311004618.920745-22-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Expand the immutable features sub-test for PERF_CAPABILITIES to verify
KVM rejects any attempt to use a PEBS format other than the host's.
Link: https://lore.kernel.org/r/20230311004618.920745-21-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework the LBR format test to use the bitfield instead of a separate
mask macro, mainly so that adding a nearly-identical PEBS format test
doesn't have to copy-paste-tweak the macro too.
No functional change intended.
Link: https://lore.kernel.org/r/20230311004618.920745-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the arbitrary "done" message from the VMX PMU caps test, it's pretty
obvious the test is done when the process exits.
Link: https://lore.kernel.org/r/20230311004618.920745-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM disallows changing PERF_CAPABILITIES after KVM_RUN, expand
the host side checks to verify KVM rejects any attempts to change bits
from userspace.
Link: https://lore.kernel.org/r/20230311004618.920745-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Test that the guest can't write 0 to PERF_CAPABILITIES, can't write the
current value, and can't toggle _any_ bits. There is no reason to special
case the LBR format.
Link: https://lore.kernel.org/r/20230311004618.920745-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add negative testing of all immutable bits in PERF_CAPABILITIES, i.e.
single bits that are reserved-0 or are effectively reserved-1 by KVM.
Omit LBR and PEBS format bits from the test as it's easier to test them
manually than it is to add safeguards to the comment path, e.g. toggling
a single bit can yield a format of '0', which is legal as a "disable"
value.
Link: https://lore.kernel.org/r/20230311004618.920745-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Verify that userspace can set all fungible features in PERF_CAPABILITIES.
Drop the now unused #define of the "full-width writes" flag.
Link: https://lore.kernel.org/r/20230311004618.920745-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that vcpu_set_msr() verifies the expected "read what was wrote"
semantics of all durable MSRs, including PERF_CAPABILITIES, drop the
now-redundant manual checks in the VMX PMU caps test.
Link: https://lore.kernel.org/r/20230311004618.920745-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Assert that KVM provides "read what you wrote" semantics for all "durable"
MSRs (for lack of a better name). The extra coverage is cheap from a
runtime performance perspective, and verifying the behavior in the common
helper avoids gratuitous copy+paste in individual tests.
Note, this affects all tests that set MSRs from userspace!
Link: https://lore.kernel.org/r/20230311004618.920745-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Reimplement vcpu_set_msr() as a macro and pretty print the failing MSR
(when possible) and the value if KVM_SET_MSRS fails instead of using the
using the standard KVM_IOCTL_ERROR(). KVM_SET_MSRS is somewhat odd in
that it returns the index of the last successful write, i.e. will be
'0' on failure barring an entirely different KVM bug. And for writing
MSRs, the MSR being written and the value being written are almost always
relevant to the failure, i.e. just saying "failed!" doesn't help debug.
Place the string goo in a separate macro in anticipation of using it to
further expand MSR testing.
Link: https://lore.kernel.org/r/20230311004618.920745-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM emulates full-width PMC writes in software, assert that KVM reports
full-width writes as supported if PERF_CAPABILITIES is supported.
Link: https://lore.kernel.org/r/20230311004618.920745-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use a separate sub-test to verify userspace can clear PERF_CAPABILITIES
and restore it to the KVM-supported value, as the testcase isn't unique
to the LBR format.
Link: https://lore.kernel.org/r/20230311004618.920745-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Split the PERF_CAPABILITIES subtests into two parts so that the LBR format
testcases don't execute after KVM_RUN. Similar to the guest CPUID model,
KVM will soon disallow changing PERF_CAPABILITIES after KVM_RUN, at which
point attempting to set the MSR after KVM_RUN will yield false positives
and/or false negatives depending on what the test is trying to do.
Land the LBR format test in a more generic "immutable features" test in
anticipation of expanding its scope to other immutable features.
Link: https://lore.kernel.org/r/20230311004618.920745-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Conflicts:
drivers/net/ethernet/google/gve/gve.h
3ce934558097 ("gve: Secure enough bytes in the first TX desc for all TCP pkts")
75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format")
https://lore.kernel.org/all/20230406104927.45d176f5@canb.auug.org.au/
https://lore.kernel.org/all/c5872985-1a95-0bc8-9dcc-b6f23b439e9d@tessares.net/
Adjacent changes:
net/can/isotp.c
051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()")
96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and can.
Current release - regressions:
- wifi: mac80211:
- fix potential null pointer dereference
- fix receiving mesh packets in forwarding=0 networks
- fix mesh forwarding
Current release - new code bugs:
- virtio/vsock: fix leaks due to missing skb owner
Previous releases - regressions:
- raw: fix NULL deref in raw_get_next().
- sctp: check send stream number after wait_for_sndbuf
- qrtr:
- fix a refcount bug in qrtr_recvmsg()
- do not do DEL_SERVER broadcast after DEL_CLIENT
- wifi: brcmfmac: fix SDIO suspend/resume regression
- wifi: mt76: fix use-after-free in fw features query.
- can: fix race between isotp_sendsmg() and isotp_release()
- eth: mtk_eth_soc: fix remaining throughput regression
- eth: ice: reset FDIR counter in FDIR init stage
Previous releases - always broken:
- core: don't let netpoll invoke NAPI if in xmit context
- icmp: guard against too small mtu
- ipv6: fix an uninit variable access bug in __ip6_make_skb()
- wifi: mac80211: fix the size calculation of
ieee80211_ie_len_eht_cap()
- can: fix poll() to not report false EPOLLOUT events
- eth: gve: secure enough bytes in the first TX desc for all TCP
pkts"
* tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: stmmac: check fwnode for phy device before scanning for phy
net: stmmac: Add queue reset into stmmac_xdp_open() function
selftests: net: rps_default_mask.sh: delete veth link specifically
net: fec: make use of MDIO C45 quirk
can: isotp: fix race between isotp_sendsmg() and isotp_release()
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
gve: Secure enough bytes in the first TX desc for all TCP pkts
netlink: annotate lockless accesses to nlk->max_recvmsg_len
ethtool: reset #lanes when lanes is omitted
ping: Fix potentail NULL deref for /proc/net/icmp.
raw: Fix NULL deref in raw_get_next().
ice: Reset FDIR counter in FDIR init stage
ice: fix wrong fallback logic for FDIR
net: stmmac: fix up RX flow hash indirection table when setting channels
net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe
wifi: mt76: ignore key disable commands
wifi: ath11k: reduce the MHI timeout to 20s
ipv6: Fix an uninit variable access bug in __ip6_make_skb()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"One single fix to mount_setattr_test build failure"
* tag 'linux-kselftest-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests mount: Fix mount_setattr_test builds failed
|
|
ACPICA commit 44f1af0664599e87bebc3a1260692baa27b2f264
Similar to "Replace one-element array with flexible-array", replace the
1-element array with a proper flexible array member as defined by C99.
This allows the code to operate without tripping compile-time and run-
time bounds checkers (e.g. via __builtin_object_size(), -fsanitize=bounds,
and/or -fstrict-flex-arrays=3).
The sizeof() uses with struct acpi_nfit_flush_address and struct
acpi_nfit_smbios have been adjusted to drop the open-coded subtraction
of the trailing single element. The result is no binary differences in
.text nor .data sections.
Link: https://github.com/acpica/acpica/commit/44f1af06
Signed-off-by: Bob Moore <robert.moore@intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 25bddd1824b1e450829468a64bbdcb38074ba3d2
Copyright updates to 2023.
Link: https://github.com/acpica/acpica/commit/25bddd18
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add unaligned descriptor test for frame size of 4001. Using an odd frame
size ensures that the end of the UMEM is not near a page boundary. This
allows testing descriptors that staddle the end of the UMEM but not a
page.
This test used to fail without the previous commit ("xsk: Fix unaligned
descriptor validation").
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405235920.7305-3-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
xdp-features supported by veth driver are no more static, but they
depends on veth configuration (e.g. if GRO is enabled/disabled or
TX/RX queue configuration). Take it into account in xdp_redirect
xdp-features selftest for veth driver.
Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/bc35455cfbb1d4f7f52536955ded81ad47d8dc54.1680777371.git.lorenzo@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
kernel test robot reported the following warning:
All warnings (new ones prefixed by >>):
tcp_mmap.c: In function 'child_thread':
>> tcp_mmap.c:211:61: warning: 'lu' may be used uninitialized in this function [-Wmaybe-uninitialized]
211 | zc.length = min(chunk_size, FILE_SZ - lu);
We want to read FILE_SZ bytes, so the correct expression
should be (FILE_SZ - total)
Fixes: 5c5945dc695c ("selftests/net: Add SHA256 computation over data sent in tcp_mmap")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304042104.UFIuevBp-lkp@intel.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xiaoyan Li <lixiaoyan@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230405071556.1019623-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 515bddf0ec41 ("selftests/clone3: test clone3 with CLONE_NEWTIME")
added an additional test, so the number passed to ksft_set_plan needs to
be bumped accordingly.
Also use ksft_finished() to print results and exit. This will catch future
mismatches between ksft_set_plan() and the number of tests being run.
Fixes: 515bddf0ec41 ("selftests/clone3: test clone3 with CLONE_NEWTIME")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In bpftool's bash completion file, function _bpftool_once_attr() is able
to process multiple arguments. There are a few locations where this
function is called multiple times in a row, each time for a single
argument; let's pass all arguments instead to minimize the number of
function calls required for the completion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-8-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support for displaying opcodes or/and file references (filepath,
line and column numbers) when dumping the control flow graphs of loaded
BPF programs with bpftool.
The filepaths in the records are absolute. To avoid blocks on the graph
to get too wide, we truncate them when they get too long (but we always
keep the entire file name). In the unlikely case where the resulting
file name is ambiguous, it remains possible to get the full path with a
regular dump (no CFG).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-7-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When dumping a program, the keywords "opcodes" (for printing the raw
opcodes), "linum" (for displaying the filename, line number, column
number along with the source code), and "visual" (for generating the
control flow graph for translated programs) are mutually exclusive. But
there's no reason why they should be. Let's make it possible to pass
several of them at once. The "file FILE" option, which makes bpftool
output a binary image to a file, remains incompatible with the others.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-6-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We do not support JSON output for control flow graphs of programs with
bpftool. So far, requiring both the CFG and JSON output would result in
producing a null JSON object. It makes more sense to raise an error
directly when parsing command line arguments and options, so that users
know they won't get any output they might expect.
If JSON is required for the graph, we leave it to Graphviz instead:
# bpftool prog dump xlated <REF> visual | dot -Tjson
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-5-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We support dumping the control flow graph of loaded programs to the DOT
format with bpftool, but so far this feature wouldn't display the source
code lines available through BTF along with the eBPF bytecode. Let's add
support for these annotations, to make it easier to read the graph.
In prog.c, we move the call to dump_xlated_cfg() in order to pass and
use the full struct dump_data, instead of creating a minimal one in
draw_bb_node().
We pass the pointer to this struct down to dump_xlated_for_graph() in
xlated_dumper.c, where most of the logics is added. We deal with BTF
mostly like we do for plain or JSON output, except that we cannot use a
"nr_skip" value to skip a given number of linfo records (we don't
process the BPF instructions linearly, and apart from the root of the
graph we don't know how many records we should skip, so we just store
the last linfo and make sure the new one we find is different before
printing it).
When printing the source instructions to the label of a DOT graph node,
there are a few subtleties to address. We want some special newline
markers, and there are some characters that we must escape. To deal with
them, we introduce a new dedicated function btf_dump_linfo_dotlabel() in
btf_dumper.c. We'll reuse this function in a later commit to format the
filepath, line, and column references as well.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-4-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes: efcef17a6d65 ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The documentation states that when line_info is available when dumping a
program, the source line will be displayed "by default". There is no
notion of "default" here: the line is always displayed if available,
there is no way currently to turn it off.
In the next sentence, the documentation states that if "linum" is used
on the command line, the relevant filename, line, and column will be
displayed "on top of the source line". This is incorrect, as they are
currently displayed on the right side of the source line (or on top of
the eBPF instruction, not the source).
This commit fixes the documentation to address these points.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-2-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The kernel's default behaviour is to obstruct the allocation of high
virtual address as it handles memory overcommit in a heuristic manner.
Setting the parameter as OVERCOMMIT_ALWAYS, ensures kernel isn't
susceptible to the availability of a platform's physical memory when
denying a memory allocation request.
Link: https://lkml.kernel.org/r/20230323060121.1175830-4-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Although there is a provision for 52 bit VA on arm64 platform, it remains
unutilised and higher addresses are not allocated. In order to
accommodate 4PB [2^52] virtual address space where supported,
NR_CHUNKS_HIGH is changed accordingly.
Array holding addresses is changed from static allocation to dynamic
allocation to accommodate its voluminous nature which otherwise might
overflow the stack.
Link: https://lkml.kernel.org/r/20230323060121.1175830-3-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests: Fix virtual address range for arm64", v2.
When the virtual address range selftest is run on arm64 and x86 platforms,
it is observed that both the low and high VA range iterations are skipped
when the MAP_CHUNK_SIZE is set to 16GB. The MAP_CHUNK_SIZE is changed to
1GB to resolve this issue, following which support for arm64 platform is
added by changing the NR_CHUNKS_HIGH for aarch64 to accommodate up to 4PB
of virtual address space allocation requests. Dynamic memory allocation
of array holding addresses is introduced to prevent overflow of the stack.
Finally, the overcommit_policy is set as OVERCOMMIT_ALWAYS to prevent the
kernel from denying a memory allocation request based on a platform's
physical memory availability.
This patch (of 3):
mmap() fails to allocate 16GB virtual space chunk, skipping both low and
high VA range iterations. Hence, reduce MAP_CHUNK_SIZE to 1GB and update
relevant macros as required.
Link: https://lkml.kernel.org/r/20230323060121.1175830-1-chaitanyas.prakash@arm.com
Link: https://lkml.kernel.org/r/20230323060121.1175830-2-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
UFFDIO_COPY already has UFFDIO_COPY_MODE_WP, so when installing a new PTE
to resolve a missing fault, one can install a write-protected one. This
is useful when using UFFDIO_REGISTER_MODE_{MISSING,WP} in combination.
This was motivated by testing HugeTLB HGM [1], and in particular its
interaction with userfaultfd features. Existing userfaultfd code supports
using WP and MINOR modes together (i.e. you can register an area with
both enabled), but without this CONTINUE flag the combination is in
practice unusable.
So, add an analogous UFFDIO_CONTINUE_MODE_WP, which does the same thing as
UFFDIO_COPY_MODE_WP, but for *minor* faults.
Update the selftest to do some very basic exercising of the new flag.
Update Documentation/ to describe how these flags are used (neither the
COPY nor the new CONTINUE versions of this mode flag were described there
before).
[1]: https://patchwork.kernel.org/project/linux-mm/cover/20230218002819.1486479-1-jthoughton@google.com/
Link: https://lkml.kernel.org/r/20230314221250.682452-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.
This definition is counter-intuitive and lead to number of bugs all over
the kernel.
Change the definition of MAX_ORDER to be inclusive: the range of orders
user can ask from buddy allocator is 0..MAX_ORDER now.
[kirill@shutemov.name: fix min() warning]
Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box
[akpm@linux-foundation.org: fix another min_t warning]
[kirill@shutemov.name: fixups per Zi Yan]
Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name
[akpm@linux-foundation.org: fix underlining in docs]
Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Enable it by default on the stress test, and add some smoke tests for the
pte markers on anonymous.
Link: https://lkml.kernel.org/r/20230309223711.823547-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When deleting the netns and recreating a new one while re-adding the
veth interface, there is a small window of time during which the old
veth interface has not yet been removed. This can cause the new addition
to fail. To resolve this issue, we can either wait for a short while to
ensure that the old veth interface is deleted, or we can specifically
remove the veth interface.
Before this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
RTNETLINK answers: File exists
changing rps_default_mask in child ns don't affect the main one[ ok ]
cat: /sys/class/net/vethC11an1/queues/rx-0/rps_cpus: No such file or directory
changing rps_default_mask in child ns affects new childns devices./rps_default_mask.sh: line 36: [: -eq: unary operator expected
[fail] expected 1 found
changing rps_default_mask in child ns don't affect existing devices[ ok ]
After this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
changing rps_default_mask in child ns don't affect the main one[ ok ]
changing rps_default_mask in child ns affects new childns devices[ ok ]
changing rps_default_mask in child ns don't affect existing devices[ ok ]
Fixes: 3a7d84eae03b ("self-tests: more rps self tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20230404072411.879476-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the development of the maple tree, the strategy of freeing multiple
nodes changed and, in the process, the pivots were reused to store
pointers to dead nodes. To ensure the readers see accurate pivots, the
writers need to mark the nodes as dead and call smp_wmb() to ensure any
readers can identify the node as dead before using the pivot values.
There were two places where the old method of marking the node as dead
without smp_wmb() were being used, which resulted in RCU readers seeing
the wrong pivot value before seeing the node was dead. Fix this race
condition by using mte_set_node_dead() which has the smp_wmb() call to
ensure the race is closed.
Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed
are marked as dead to ensure there are no other call paths besides the two
updated paths.
This is necessary for the RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-6-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
