| Age | Commit message (Collapse) | Author |
|---|
|
framework
In kselftest framework, if a sub test can not run by some reasons,
the test result should be marked as SKIP rather than FAIL.
Return KSFT_SKIP(4) instead of KSFT_FAIL(1) if resctrl_tests is not run
as root or it is run on a test environment which does not support resctrl.
- ksft_exit_fail_msg(): returns KSFT_FAIL(1)
- ksft_exit_skip(): returns KSFT_SKIP(4)
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When testing on a Intel(R) Xeon(R) Gold 6254 CPU @ 3.10GHz the resctrl
selftests fail due to timeout after exceeding the default time limit of
45 seconds. On this system the test takes about 68 seconds.
Since the failing test by default accesses a fixed size of memory, the
execution time should not vary significantly between different environment.
A new default of 120 seconds should be sufficient yet easy to customize
with the introduction of the "settings" file for reference.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
SIGTERM is received
In kselftest framework, a sub test is run using the timeout utility
and it will send SIGTERM to the test upon timeout.
In resctrl_tests, a child process is created by fork() to
run benchmark but SIGTERM is not set in sigaction().
If SIGTERM signal is received, the parent process will be killed,
but the child process still exists.
Kill child process before the parent process terminates
if SIGTERM signal is received.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
on Intel CPU
According to "Intel Resource Director Technology (Intel RDT) on
2nd Generation Intel Xeon Scalable Processors Reference Manual",
When the Intel Sub-NUMA Clustering(SNC) feature is enabled,
Intel CMT and MBM counters may not be accurate.
However, there does not seem to be an architectural way to detect
if SNC is enabled.
If the result of MBM&CMT test fails on Intel CPU,
print a message to let users know a possible cause of failure.
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, the resctrl_tests only has a function to detect AMD vendor.
Since when the Intel Sub-NUMA Clustering feature is enabled,
Intel CMT and MBM counters may not be accurate,
the resctrl_tests also need a function to detect Intel vendor.
And in the future, resctrl_tests will need a function to detect different
vendors, such as Arm.
Extend the function to detect Intel vendor as well. Also,
this function can be easily extended to detect other vendors.
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
musl does not like including sys/fcntl.h directly:
[...]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
[...]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220424051022.2619648-5-asmadeus@codewreck.org
|
|
musl nftw implementation does not support FTW_ACTIONRETVAL. There have been
multiple attempts at pushing the feature in musl upstream, but it has been
refused or ignored all the times:
https://www.openwall.com/lists/musl/2021/03/26/1
https://www.openwall.com/lists/musl/2022/01/22/1
In this case we only care about /proc/<pid>/fd/<fd>, so it's not too difficult
to reimplement directly instead, and the new implementation makes 'bpftool perf'
slightly faster because it doesn't needlessly stat/readdir unneeded directories
(54ms -> 13ms on my machine).
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220424051022.2619648-4-asmadeus@codewreck.org
|
|
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be supported with gcc v3.2,
the minimal required version for stable kernels.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be supported with gcc v3.2,
the minimal required version for stable kernels.
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from already included kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be compiled with gcc v3.2,
the minimal required version for stable kernels.
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: linux-mm@kvack.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Some selftests depend on information provided by the CPUID instruction.
To support this dependency the selftests implement private wrappers for
CPUID.
Duplication of the CPUID wrappers should be avoided.
Both gcc and clang/LLVM provide __cpuid_count() macros but neither
the macro nor its header file are available in all the compiler
versions that need to be supported by the selftests. __cpuid_count()
as provided by gcc is available starting with gcc v4.4, so it is
not available if the latest tests need to be run in all the
environments required to support kernels v4.9 and v4.14 that
have the minimal required gcc v3.2.
Duplicate gcc's __cpuid_count() macro to provide a centrally defined
macro for __cpuid_count() to help eliminate the duplicate CPUID wrappers
while continuing to compile in older environments.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently the damon selftests are not built with the rest of the
selftests. We add damon to the list of targets.
Fixes: b348eb7abd09 ("mm/damon: add user space selftests")
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Yuanchu Xie <yuanchu@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Most of the test suites in tools/testing/selftests contain a config file
that specifies which kernel config options need to be present in order for
the test suite to be able to run and perform meaningful validation. There
is no config file for the tools/testing/selftests/cgroup test suite, so
this patch adds one.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The cgroup cpu controller selftests have a test_cpucg_max() testcase
that validates the behavior of the cpu.max knob. Let's also add a
testcase that verifies that the behavior works correctly when set on a
nested cgroup.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The cgroup cpu controller test suite has a number of testcases that
validate the expected behavior of the cpu.weight knob, but none for
cpu.max. This testcase fixes that by adding a testcase for cpu.max as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The cgroup cpu controller test suite currently contains a testcase called
test_cpucg_nested_weight_underprovisioned() which verifies the expected
behavior of cpu.weight when applied to nested cgroups. That first testcase
validated the expected behavior when the processes in the leaf cgroups
overcommitted the system. This patch adds a complementary
test_cpucg_nested_weight_underprovisioned() testcase which validates
behavior when those leaf cgroups undercommit the system.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The cgroup cpu controller tests in
tools/testing/selftests/cgroup/test_cpu.c have some testcases that validate
the expected behavior of setting cpu.weight on cgroups, and then hogging
CPUs. What is still missing from the suite is a testcase that validates
nested cgroups. This patch adds test_cpucg_nested_weight_overprovisioned(),
which validates that a parent's cpu.weight will override its children if
they overcommit a host, and properly protect any sibling groups of that
parent.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Currently the binderfs test says what failure it encountered
without saying why it may occurred when it fails to mount
binderfs. So, Warn about enabling CONFIG_ANDROID_BINDERFS in the
running kernel.
Signed-off-by: Karthik Alapati <mail@karthek.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The link variable is already of type 'struct bpf_link *', casting it to
'struct bpf_link *' is redundant, drop it.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220424143420.457082-1-ytcoode@gmail.com
|
|
Once line card is activated, check the device FW version is exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Once line card is provisioned, check if HW revision and INI version
are exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Once line card is provisioned, check the count of devices on it and
print them out.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Not much of a test but we keep on getting problems with boolean controls
not being called Switches so let's add a few basic checks to help people
spot problems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220421115020.14118-1-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
To pick up fixes, such as the llvm one for ubuntu:22.04.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out perf_evsel__ioctl() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220422162402.147958-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since for cpu_core or cpu_atom, they have different topdown events
groups.
For cpu_core, --topdown equals to:
"{slots,cpu_core/topdown-retiring/,cpu_core/topdown-bad-spec/,
cpu_core/topdown-fe-bound/,cpu_core/topdown-be-bound/,
cpu_core/topdown-heavy-ops/,cpu_core/topdown-br-mispredict/,
cpu_core/topdown-fetch-lat/,cpu_core/topdown-mem-bound/}"
For cpu_atom, --topdown equals to:
"{cpu_atom/topdown-retiring/,cpu_atom/topdown-bad-spec/,
cpu_atom/topdown-fe-bound/,cpu_atom/topdown-be-bound/}"
To simplify the implementation, on hybrid, --topdown is used
together with --cputype. If without --cputype, it uses cpu_core
topdown events by default.
# ./perf stat --topdown -a sleep 1
WARNING: default to use cpu_core topdown events
Performance counter stats for 'system wide':
retiring bad speculation frontend bound backend bound heavy operations light operations branch mispredict machine clears fetch latency fetch bandwidth memory bound Core bound
4.1% 0.0% 5.1% 90.8% 2.3% 1.8% 0.0% 0.0% 4.2% 0.9% 9.9% 81.0%
1.002624229 seconds time elapsed
# ./perf stat --topdown -a --cputype atom sleep 1
Performance counter stats for 'system wide':
retiring bad speculation frontend bound backend bound
13.5% 0.1% 31.2% 55.2%
1.002366987 seconds time elapsed
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220422065635.767648-3-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix header include for LLVM >= 14 when building with libclang.
- Allow access to 'data_src' for auxtrace in 'perf script' with ARM SPE
perf.data files, fixing processing data with such attributes.
- Fix error message for test case 71 ("Convert perf time to TSC") on
s390, where it is not supported.
* tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test: Fix error message for test case 71 on s390, where it is not supported
perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event
perf script: Always allow field 'data_src' for auxtrace
perf clang: Fix header include for LLVM >= 14
|
|
This adds an initial subset of forwarding selftests which I considered
to be relevant for DSA drivers, along with a forwarding.config that
makes it easier to run them (disables veth pair creation, makes sure MAC
addresses are unique and stable).
The intention is to request driver writers to run these selftests during
review and make sure that the tests pass, or at least that the problems
are known.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This tests the capability of switch ports to filter out undesired
traffic. Different drivers are expected to have different capabilities
here (so some may fail and some may pass), yet the test still has some
value, for example to check for regressions.
There are 2 kinds of failures, one is when a packet which should have
been accepted isn't (and that should be fixed), and the other "failure"
(as reported by the test) is when a packet could have been filtered out
(for being unnecessary) yet it was received.
The bridge driver fares particularly badly at this test:
TEST: br0: Unicast IPv4 to primary MAC address [ OK ]
TEST: br0: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: br0: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to joined group [ OK ]
TEST: br0: Multicast IPv4 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: br0: Multicast IPv6 to joined group [ OK ]
TEST: br0: Multicast IPv6 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv6 to unknown group, allmulti [ OK ]
mainly because it does not implement IFF_UNICAST_FLT. Yet I still think
having the test (with the failures) is useful in case somebody wants to
tackle that problem in the future, to make an easy before-and-after
comparison.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bombard a standalone switch port with various kinds of traffic to ensure
it is really standalone and doesn't leak packets to other switch ports.
Also check for switch ports in different bridges, and switch ports in a
VLAN-aware bridge but having different pvids. No forwarding should take
place in either case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
interface
Pinging an IPv6 link-local multicast address selects the link-local
unicast address of the interface as source, and we'd like to monitor for
that in tcpdump.
Add a helper to the forwarding library which retrieves the link-local
IPv6 address of an interface, to make that task easier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the forwarding library with calls to some small C programs which
join an IP multicast group and send some packets to it. Both IPv4 and
IPv6 groups are supported. Use cases range from testing IGMP/MLD
snooping, to RX filtering, to multicast routing.
Testing multicast traffic using msend/mreceive is intended to be done
using tcpdump.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend tcpdump_start() & C:o to handle multiple instances. Useful when
observing bridge operation, e.g., unicast learning/flooding, and any
case of multicast distribution (to these ports but not that one ...).
This means the interface argument is now a mandatory argument to all
tcpdump_*() functions, hence the changes to the ocelot flower test.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For some use-cases we may want to change the tcpdump flags used in
tcpdump_start(). For instance, observing interfaces without the PROMISC
flag, e.g. to see what's really being forwarded to the bridge interface.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default, DSA switch ports inherit their MAC address from the DSA
master.
This works well for practical situations, but some selftests like
bridge_vlan_unaware.sh loop back 2 standalone DSA ports with 2 bridged
DSA ports, and require the bridge to forward packets between the
standalone ports.
Due to the bridge seeing that the MAC DA it needs to forward is present
as a local FDB entry (it coincides with the MAC address of the bridge
ports), the test packets are not forwarded, but terminated locally on
br0. In turn, this makes the ping and ping6 tests fail.
Address this by introducing an option to have stable MAC addresses.
When mac_addr_prepare is called, the current addresses of the netifs are
saved and replaced with 00:01:02:03:04:${netif number}. Then when
mac_addr_restore is called at the end of the test, the original MAC
addresses are restored. This ensures that the MAC addresses are unique,
which makes the test pass even for DSA ports.
The usage model is for the behavior to be opt-in via STABLE_MAC_ADDRS,
which DSA should set to true, all others behave as before. By hooking
the calls to mac_addr_prepare and mac_addr_restore within the forwarding
lib itself, we do not need to patch each individual selftest, the only
requirement is that pre_cleanup is called.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a function chk_infi_nr() to check the mibs for the
infinite mapping. Invoke it in chk_join_nr() when validate_checksum
is set.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"The main and larger change here is a workaround for AMD's lack of
cache coherency for encrypted-memory guests.
I have another patch pending, but it's waiting for review from the
architecture maintainers.
RISC-V:
- Remove 's' & 'u' as valid ISA extension
- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
- Fix NMI watchdog in guests on AMD
- Fix for SEV cache incoherency issues
- Don't re-acquire SRCU lock in complete_emulated_io()
- Avoid NULL pointer deref if VM creation fails
- Fix race conditions between APICv disabling and vCPU creation
- Bugfixes for disabling of APICv
- Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
- Do not use bitfields larger than 32-bits, they differ between GCC
and clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: introduce and use more page size-related constants
kvm: selftests: do not use bitfields larger than 32-bits for PTEs
KVM: SEV: add cache flush to solve SEV cache incoherency issues
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
KVM: selftests: Silence compiler warning in the kvm_page_table_test
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
KVM: SPDX style and spelling fixes
KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
RISC-V: KVM: Restrict the extensions that can be disabled
RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
|
|
It turns out that by having CONFIG_ACPI=n, we've been failing to boot
additional CPUs, and so these systems were functionally UP. The code
bloat is unfortunate for build times, but I don't see an alternative. So
this commit sets CONFIG_ACPI=y for x86_64 and i686 configs.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use bpf_link_create() API in fexit_stress test to attach FEXIT programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kui-Feng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-4-andrii@kernel.org
|
|
Teach bpf_link_create() to fallback to bpf_raw_tracepoint_open() on
older kernels for programs that are attachable through
BPF_RAW_TRACEPOINT_OPEN. This makes bpf_link_create() more unified and
convenient interface for creating bpf_link-based attachments.
With this approach end users can just use bpf_link_create() for
tp_btf/fentry/fexit/fmod_ret/lsm program attachments without needing to
care about kernel support, as libbpf will handle this transparently. On
the other hand, as newer features (like BPF cookie) are added to
LINK_CREATE interface, they will be readily usable though the same
bpf_link_create() API without any major refactoring from user's
standpoint.
bpf_program__attach_btf_id() is now using bpf_link_create() internally
as well and will take advantaged of this unified interface when BPF
cookie is added for fentry/fexit.
Doing proactive feature detection of LINK_CREATE support for
fentry/tp_btf/etc is quite involved. It requires parsing vmlinux BTF,
determining some stable and guaranteed to be in all kernels versions
target BTF type (either raw tracepoint or fentry target function),
actually attaching this program and thus potentially affecting the
performance of the host kernel briefly, etc. So instead we are taking
much simpler "lazy" approach of falling back to
bpf_raw_tracepoint_open() call only if initial LINK_CREATE command
fails. For modern kernels this will mean zero added overhead, while
older kernels will incur minimal overhead with a single fast-failing
LINK_CREATE call.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kui-Feng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-3-andrii@kernel.org
|
|
Test case 71 'Convert perf time to TSC' is not supported on s390.
Subtest 71.1 is skipped with the correct message, but subtest 71.2 is
not skipped and fails.
The root cause is function evlist__open() called from
test__perf_time_to_tsc(). evlist__open() returns -ENOENT because the
event cycles:u is not supported by the selected PMU, for example
platform s390 on z/VM or an x86_64 virtual machine.
The PMU driver returns -ENOENT in this case. This error is leads to the
failure.
Fix this by returning TEST_SKIP on -ENOENT.
Output before:
71: Convert perf time to TSC:
71.1: TSC support: Skip (This architecture does not support)
71.2: Perf time to TSC: FAILED!
Output after:
71: Convert perf time to TSC:
71.1: TSC support: Skip (This architecture does not support)
71.2: Perf time to TSC: Skip (perf_read_tsc_conversion is not supported)
This also happens on an x86_64 virtual machine:
# uname -m
x86_64
$ ./perf test -F 71
71: Convert perf time to TSC :
71.1: TSC support : Ok
71.2: Perf time to TSC : FAILED!
$
Committer testing:
Continues to work on x86_64:
$ perf test 71
71: Convert perf time to TSC :
71.1: TSC support : Ok
71.2: Perf time to TSC : Ok
$
Fixes: 290fa68bdc458863 ("perf test tsc: Fix error message when not supported")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chengdong Li <chengdongli@tencent.com>
Cc: chengdongli@tencent.com
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220420062921.1211825-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't report result if the PERF_SAMPLE_DATA_SRC bit is missed in sample
type.
The commit ffab487052054162 ("perf: arm-spe: Fix perf report
--mem-mode") partially fixes the issue. It adds PERF_SAMPLE_DATA_SRC
bit for Arm SPE event, this allows the perf data file generated by
kernel v5.18-rc1 or later version can be reported properly.
On the other hand, perf tool still fails to be backward compatibility
for a data file recorded by an older version's perf which contains Arm
SPE trace data. This patch is a workaround in reporting phase, when
detects ARM SPE PMU event and without PERF_SAMPLE_DATA_SRC bit, it will
force to set the bit in the sample type and give a warning info.
Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/20220414123201.842754-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If use command 'perf script -F,+data_src' to dump memory samples with
Arm SPE trace data, it reports error:
# perf script -F,+data_src
Samples for 'dummy:u' event do not have DATA_SRC attribute set. Cannot print 'data_src' field.
This is because the 'dummy:u' event is absent DATA_SRC bit in its sample
type, so if a file contains AUX area tracing data then always allow
field 'data_src' to be selected as an option for perf script.
Fixes: e55ed3423c1bb29f ("perf arm-spe: Synthesize memory event")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220417114837.839896-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The header TargetRegistry.h has moved in LLVM/clang 14.
Committer notes:
The problem as noticed when building in ubuntu:22.04:
90 98.61 ubuntu:22.04 : FAIL gcc version 11.2.0 (Ubuntu 11.2.0-19ubuntu1)
util/c++/clang.cpp:23:10: fatal error: llvm/Support/TargetRegistry.h: No such file or directory
23 | #include "llvm/Support/TargetRegistry.h"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Fixed after applying this patch.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://twitter.com/GuilhermeAmadio/status/1514970524232921088
Link: http://lore.kernel.org/lkml/Ylp0M/VYgHOxtcnF@gentoo.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_weight_underprovisioned()
that verifies that processes with different cpu.weight that are all running
on an underprovisioned system, still get roughly the same amount of cpu
time.
Because test_cpucg_weight_underprovisioned() is very similar to
test_cpucg_weight_overprovisioned(), this patch also pulls the common logic
into a separate helper function that is invoked from both testcases, and
which uses function pointers to invoke the unique portions of the
testcases.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_weight_overprovisioned()
that verifies the expected behavior of creating multiple processes with
different cpu.weight, on a system that is overprovisioned.
So as to avoid code duplication, this patch also updates cpu_hog_func_param
to take a new hog_clock_type enum which informs how time is counted in
hog_cpus_timed() (either process time or wall clock time).
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_stats() that verifies the
expected behavior of the cpu.stat interface. In doing so, we define a
new hog_cpus_timed() function which takes a cpu_hog_func_param struct
that configures how many CPUs it uses, and how long it runs. Future
patches will also spawn threads that hog CPUs, so this function will
eventually serve those use-cases as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The cgroup selftests suite currently contains tests that validate various
aspects of cgroup, such as validating the expected behavior for memory
controllers, the expected behavior of cgroup.procs, etc. There are no tests
that validate the expected behavior of the cgroup cpu controller.
This patch therefore adds a new test_cpu.c file that will contain cpu
controller testcases. The file currently only contains a single testcase
that validates creating nested cgroups with cgroup.subtree_control
including cpu. Future patches will add more sophisticated testcases that
validate functional aspects of the cpu controller.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Turn kmem_cache_alloc() into a wrapper around kmem_cache_alloc_lru().
Fixes: 9bbdc0f32409 ("xarray: use kmem_cache_alloc_lru to allocate xa_node")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Li Wang <liwang@redhat.com>
|
|
For hybrid events, by default stat aggregates and reports the event counts
per pmu.
# ./perf stat -e cycles -a sleep 1
Performance counter stats for 'system wide':
14,066,877,268 cpu_core/cycles/
6,814,443,147 cpu_atom/cycles/
1.002760625 seconds time elapsed
Sometimes, it's also useful to aggregate event counts from all PMUs.
Create a new option '--hybrid-merge' to enable that behavior and report
the counts without PMUs.
# ./perf stat -e cycles -a --hybrid-merge sleep 1
Performance counter stats for 'system wide':
20,732,982,512 cycles
1.002776793 seconds time elapsed
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220422065635.767648-2-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
