| Age | Commit message (Collapse) | Author |
|---|
|
This first happened with a gcc function, _cpp_lex_token, that has the
usual jumps:
│1159e6c: ↓ jne 115aa32 <_cpp_lex_token@@Base+0xf92>
I.e. jumps to a label inside that function (_cpp_lex_token), and those
works, but also this kind:
│1159e8b: ↓ jne c469be <cpp_named_operator2name@@Base+0xa72>
I.e. jumps to another function, outside _cpp_lex_token, which are not
being correctly handled generating as a side effect references to
ab->offset[] entries that are set to NULL, so to make this code more
robust, check that here.
A proper fix for will be put in place, looking at the function name
right after the '<' token and probably treating this like a 'call'
instruction.
For now just don't draw the arrow.
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: https://lkml.kernel.org/n/tip-5tzvb875ep2sel03aeefgmud@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
iproute2 print_skbmod() prints the configured ethertype using format 0x%X:
therefore, test 9aa8 systematically fails, because it configures action #4
using ethertype 0x0031, and expects 0x0031 when it reads it back. Changing
the expected value to 0x31 lets the test result 'not ok' become 'ok'.
tested with:
# ./tdc.py -e 9aa8
Test 9aa8: Get a single skbmod action from a list
All test results:
1..1
ok 1 9aa8 Get a single skbmod action from a list
Fixes: cf797ac49b94 ("tc-testing: Add test cases for police and skbmod")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes testns after test failure so that next test can
continue with clean ns
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/pti fixes from Thomas Gleixner:
"Three fixes related to melted spectrum:
- Sync the cpu_entry_area page table to initial_page_table on 32 bit.
Otherwise suspend/resume fails because resume uses
initial_page_table and triggers a triple fault when accessing the
cpu entry area.
- Zero the SPEC_CTL MRS on XEN before suspend to address a
shortcoming in the hypervisor.
- Fix another switch table detection issue in objtool"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
objtool: Fix another switch table detection issue
x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
|
|
Add a command line arg to suppress tap output. Handy in case
all the tap output is being supplied by the plugins.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IPv6 multipath test using L4 hashing. Created with inputs from
Ido Schimmel.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-03-03
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Extend bpftool to build up CFG information of eBPF programs and add an
option to dump this in DOT format such that this can later be used with
DOT graphic tools (xdot, graphviz, etc) to visualize it. Part of the
analysis performed is sub-program detection and basic-block partitioning,
from Jiong.
2) Multiple enhancements for bpftool's batch mode, more specifically the
parser now understands comments (#), continuation lines (\), and arguments
enclosed between quotes. Also, allow to read from stdin via '-' as input
file, all from Quentin.
3) Improve BPF kselftests by i) unifying the rlimit handling into a helper
that is then used by all tests, and ii) add support for testing tail calls
to test_verifier plus add tests covering all corner cases. The latter is
especially useful for testing JITs, from Daniel.
4) Remove x64 JIT's bpf_flush_icache() since flush_icache_range() is a noop
on x64, from Daniel.
5) Fix one more occasion in BPF samples where we do not detach the BPF program
from the cgroup after completion, from Prashant.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 16c513b13477
("selftests: memory-hotplug: silence test command echo")
introduced regression in emit_tests and results in the following
failure when selftests are installed and run. Fix it.
Running tests in memory-hotplug
========================================
./run_kselftest.sh: line 121: @./mem-on-off-test.sh: No such file or
directory
selftests: memory-hotplug [FAIL]
Fixes: 16c513b13477 (selftests: memory-hotplug: silence test command echo")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Improve argument parsing from batch input files in order to support
arguments enclosed between single (') or double quotes ("). For example,
this command can now be parsed in batch mode:
bpftool prog dump xlated id 1337 file "/tmp/my file with spaces"
The function responsible for parsing command arguments is copied from
its counterpart in lib/utils.c in iproute2 package.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Make bpftool read its command list from standard input when the name if
the input file is a single dash.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add support for continuation lines, such as in the following example:
prog show
prog dump xlated \
id 1337 opcodes
This patch is based after the code for support for continuation lines
from file lib/utils.c from package iproute2.
"Lines" in error messages are renamed as "commands", as we count the
number of commands (but we ignore empty lines, comments, and do not add
continuation lines to the count).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Replace '#' by '\0' in commands read from batch files in order to avoid
processing the remaining part of the line, thus allowing users to use
comments in the files.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-02-28
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Add schedule points and reduce the number of loop iterations
the test_bpf kernel module is performing in order to not hog
the CPU for too long, from Eric.
2) Fix an out of bounds access in tail calls in the ppc64 BPF
JIT compiler, from Daniel.
3) Fix a crash on arm64 on unaligned BPF xadd operations that
could be triggered via interpreter and JIT, from Daniel.
Please not that once you merge net into net-next at some point, there
is a minor merge conflict in test_verifier.c since test cases had
been added at the end in both trees. Resolution is trivial: keep all
the test cases from both trees.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add bash completion for the "visual" keyword used for dumping the CFG of
eBPF programs with bpftool. Make sure we only complete with this keyword
when we dump "xlated" (and not "jited") instructions.
Acked-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds new command-line option for visualizing the xlated eBPF
sequence.
Documentations are updated accordingly.
Usage:
bpftool prog dump xlated id 2 visual
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch let bpftool print .dot graph file into stdout.
This graph is generated by the following steps:
- iterate through the function list.
- generate basic-block(BB) definition for each BB in the function.
- draw out edges to connect BBs.
This patch is the initial support, the layout and decoration of the .dot
graph could be improved.
Also, it will be useful if we could visualize some performance data from
static analysis.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds out edges for each basic-block. We will need these out
edges to finish the .dot graph drawing.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch partition basic-block for each function in the CFG. The
algorithm is simple, we identify basic-block head in a first traversal,
then second traversal to identify the tail.
We could build extended basic-block (EBB) in next steps. EBB could make the
graph more readable when the eBPF sequence is big.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch detect all sub-programs from the eBPF sequence and keep the
information in the new CFG data structure.
The detection algorithm is basically the same as the one in verifier except
we need to use insn->off instead of insn->imm to get the pc-relative call
offset. Because verifier has modified insn->off/insn->imm during finishing
the verification.
Also, we don't need to do some sanity checks as verifier has done them.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch factors out those code of dumping xlated eBPF instructions into
xlated_dumper.[h|c].
They are quite independent dumper functions, so better to be kept
separately.
New dumper support will be added in later patches in this set.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It is obvious we could use 'else if' instead of start a new 'if' in the
touched code.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a better description to the summary for multipath tests. e.g.,
INFO: Running IPv6 multipath tests
TEST: ECMP [PASS]
INFO: Expected ratio 1.00 Measured ratio 1.02
TEST: Weighted MP 2:1 [PASS]
INFO: Expected ratio 2.00 Measured ratio 2.02
TEST: Weighted MP 11:45 [PASS]
INFO: Expected ratio 4.09 Measured ratio 4.03
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On Debian jessie ping can not handle IPv6 addresses so the command
fails. Use PING6 which is set to ping6.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the packet stats have a difference of 0, the test output shows:
INFO: Expected ratio 2.00 Measured ratio
Runtime error (func=(main), adr=9): Divide by zero
(standard_in) 2: syntax error
(standard_in) 1: syntax error
./router_multipath.sh: line 187: test: : integer expression expected
TEST: Multipath [FAIL]
Too large discrepancy between expected and measured ratios
Handle the 0 and display a cleaner message:
INFO: Running IPv6 multipath tests
TEST: Multipath [FAIL]
Packet difference is 0
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Capabilities of tc command are irrelevant for router tests:
$ ./router.sh
SKIP: iproute2 too old, missing shared block support
Add a CHECK_TC flag and only check tc capabilities if set. Add flag to
tc_common.sh and have it sourced before lib.sh
Also, if the command lacks some feature the test should exit non-0.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The subpage_prot syscall is only functional when the system is using
the Hash MMU. Since commit 5b2b80714796 ("powerpc/mm: Invalidate
subpage_prot() system call on radix platforms") it returns ENOENT when
the Radix MMU is active. Currently this just makes the test fail.
Additionally the syscall is not available if the kernel is built with
4K pages, or if CONFIG_PPC_SUBPAGE_PROT=n, in which case it returns
ENOSYS because the syscall is missing entirely.
So check explicitly for ENOENT and ENOSYS and skip if we see either of
those.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
PRIu64 is defined in user space to match libc's uint64_t definition.
However, gpioevent_data structure in the kernel is defined using the
kernel's own __u64 type.
gpio-event-mon.c: In function ‘monitor_device’:
gpio-event-mon.c:102:19: warning: format ‘%lu’ expects argument of type
‘long unsigned int’, but argument 3 has type ‘__u64 {aka long long
unsigned int}’ [-Wformat=]
fprintf(stdout, "GPIO EVENT %" PRIu64 ": ", event.timestamp);
^~~~~~~~~~~~~~
LD /tmp/kselftest/gpiogpio-event-mon-in.o
LINK /tmp/kselftest/gpiogpio-event-mon
Fix is to replace PRIu64 with llu, which we know is what the kernel uses
for __u64.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes for various problems in test output, compile errors, and missing
configs"
* tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: update .gitignore with new test
selftests: memory-hotplug: silence test command echo
selftests/futex: Fix line continuation in Makefile
selftests: memfd: add config fragment for fuse
selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
selftests/android: Fix line continuation in Makefile
selftest/vDSO: fix O=
selftests: sync: missing CFLAGS while compiling
|
|
Test shared block infrastructure. This is a basic test that shares TC
block in between 2 clsact qdiscs.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tests chains matching and goto chain action.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add first part of actions tests. This patch only contains tests of gact
ok/drop/trap and mirred redirect egress.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add first part of flower tests. This patch only contains dst/src ip/mac
matching.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Have one host generate 16K IPv6 echo requests with a random flow label
and check that they are distributed between both multipath links
according to the provided weights.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use different weights for the multipath route configured on the first
router and check that the different flows generated by the first host
are distributed according to the provided weights.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a topology with two hosts, each directly connected to a different
router. Both routers are connected using two links, enabling multipath
routing.
Test IPv4 and IPv6 ping using default MTU and large MTU.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Configure two hosts which are directly connected to the same router and
test IPv4 and IPv6 ping. Use a large MTU and check that ping is
unaffected.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add test cases for unknown unicast and unregistered multicast flooding.
For each traffic type, turn off flooding on one bridged port and inject
a packet of the specified type through the second bridged port. Make
sure the packet was not received by checking the ACL counters on the
other end. Later, turn on flooding and make sure the packet was
received.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Send a packet with a specific destination MAC, make sure it was learned
on the ingress port and then aged-out.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add initial framework to test packet forwarding functionality. The tests
can run on actual devices using loop-backed cables or using veth pairs.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Continue the switch table detection whack-a-mole. Add a check to
distinguish KASAN data reads from switch data reads. The switch jump
tables in .rodata have relocations associated with them.
This fixes the following warning:
crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com
|
|
The tm-resched-dscr test links against pmu/lib.o, but we don't have a
rule to clean pmu/lib.o. This can lead to a build break if you build
for big endian and then little, or vice versa.
Fix it by making tm-resched-dscr depend on pmu/lib.c, causing the code
to be built directly in, meaning no .o is generated.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
PF_RDS sockets pass up cookies for zerocopy completion as ancillary
data. Update msg_zerocopy to reap this information.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for optimized reception of zerocopy completion,
revert the Rx side changes introduced by Commit dfb8434b0a94
("selftests/net: add zerocopy support for PF_RDS test case")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes: 153e1b84f477 ("selftests: Add FIB onlink tests")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we execute 'perf stat --per-thread' with non-root account (even set
kernel.perf_event_paranoid = -1 yet), it reports the error:
jinyao@skl:~$ perf stat --per-thread
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
which controls use of the performance events system by
unprivileged users (without CAP_SYS_ADMIN).
The current value is 2:
-1: Allow use of (almost) all events by all users
Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
>= 0: Disallow ftrace function tracepoint by users without CAP_SYS_ADMIN
Disallow raw tracepoint access by users without CAP_SYS_ADMIN
>= 1: Disallow CPU event access by users without CAP_SYS_ADMIN
>= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN
To make this setting permanent, edit /etc/sysctl.conf too, e.g.:
kernel.perf_event_paranoid = -1
Perhaps the ptrace rule doesn't allow to trace some processes. But anyway
the global --per-thread mode had better ignore such errors and continue
working on other threads.
This patch will record the index of error thread in perf_evsel__open()
and remove this thread before retrying.
For example (run with non-root, kernel.perf_event_paranoid isn't set):
jinyao@skl:~$ perf stat --per-thread
^C
Performance counter stats for 'system wide':
vmstat-3458 6.171984 cpu-clock:u (msec) # 0.000 CPUs utilized
perf-3670 0.515599 cpu-clock:u (msec) # 0.000 CPUs utilized
vmstat-3458 1,163,643 cycles:u # 0.189 GHz
perf-3670 40,881 cycles:u # 0.079 GHz
vmstat-3458 1,410,238 instructions:u # 1.21 insn per cycle
perf-3670 3,536 instructions:u # 0.09 insn per cycle
vmstat-3458 288,937 branches:u # 46.814 M/sec
perf-3670 936 branches:u # 1.815 M/sec
vmstat-3458 15,195 branch-misses:u # 5.26% of all branches
perf-3670 76 branch-misses:u # 8.12% of all branches
12.651675247 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1516117388-10120-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
One of the downsides of the test_bpf module was that since being
in kernel space, it couldn't test-run tail calls. Now that the
test_verifier has the ability to perform run-time tests, populate
the prog array so we actually jump into other BPF programs and
can check all corner cases. Most useful in combination with JITs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Unify memlock handling into bpf_rlimit.h and replace all occurences
in BPF kselftests with it.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
