From 5e3465f63da80f825a2a8b51af5e28e0cc5e75f7 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 16 Jul 2017 16:11:45 +0200 Subject: ARM64: dts: meson-gx: consistently use the GIC_SPI and IRQ type macros the mailbox and ethmac nodes used the magic number "0" instead of the GIC_SPI preprocessor macro. Additionally the ethmac used the magic number "1" instead of IRQ_TYPE_EDGE_RISING. Fix this to make the .dtsi easier to read. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 35b8c88c3220..492e6a24349a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -437,9 +437,9 @@ mailbox: mailbox@404 { compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; reg = <0 0x404 0 0x4c>; - interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, - <0 209 IRQ_TYPE_EDGE_RISING>, - <0 210 IRQ_TYPE_EDGE_RISING>; + interrupts = , + , + ; #mbox-cells = <1>; }; }; @@ -448,7 +448,7 @@ compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x4>; - interrupts = <0 8 1>; + interrupts = ; interrupt-names = "macirq"; status = "disabled"; }; -- cgit From c9fe1cfe4e90a89c299ed0189355f1c24b69ce92 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 23 Jun 2017 10:28:17 +0200 Subject: ARM64: dts: meson-gx: Add SoC info register Add node for the Amlogic Meson GX SoC information register. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 492e6a24349a..edd31cf0648e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -374,6 +374,12 @@ #reset-cells = <1>; }; + sec_AO: ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; + }; + uart_AO: serial@4c0 { compatible = "amlogic,meson-uart"; reg = <0x0 0x004c0 0x0 0x14>; -- cgit From 7e8634e821e1867aa13c25853ade18b37bfb8740 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 28 Jun 2017 07:53:43 -0700 Subject: dt-bindings: amlogic: add unstable statement Due to the lack of documentation on this SoC family, discovery of new features, and correcting of previous misunderstandings is expected, so it's unrealistic to expect any form of stable bindings for this SoC family. Make that clear inthe binding documentation. Signed-off-by: Kevin Hilman Acked-by: Jerome Brunet Acked-by: Rob Herring Signed-off-by: Kevin Hilman --- Documentation/devicetree/bindings/arm/amlogic.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 0fff40a6330d..f3fa392a6d5e 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -1,6 +1,18 @@ Amlogic MesonX device tree bindings ------------------------------------------- +Work in progress statement: + +Device tree files and bindings applying to Amlogic SoCs and boards are +considered "unstable". Any Amlogic device tree binding may change at +any time. Be sure to use a device tree binary and a kernel image +generated from the same source tree. + +Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a +stable binding/ABI. + +--------------------------------------------------------------- + Boards with the Amlogic Meson6 SoC shall have the following properties: Required root node property: compatible: "amlogic,meson6" -- cgit From 5149616e7a4ef4eae19cdbfe5e21143d5052b51d Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 1 Aug 2017 17:22:24 +0200 Subject: ARM64: dts: meson-gxbb: p20x: add card regulator settle times Changing the card voltage on the p200 is not instantaneous, especially when switching from 3.3v to 1.8v. I take at least 70ms for the regulator to go from 3.3v to 1.8v. Add margin to that to make sure we don't upset the sdcard during the voltage switch Fixes: ef8d2ffedf18 ("ARM64: dts: meson-gxbb: add MMC support") Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index d904deb1018c..58b32f272a0e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -84,6 +84,9 @@ /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ states = <1800000 0 3300000 1>; + + regulator-settling-time-up-us = <10000>; + regulator-settling-time-down-us = <150000>; }; vddio_boot: regulator-vddio_boot { -- cgit From 60795933b7096930154f248425f0046bb587de7f Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 28 Jul 2017 15:54:43 +0200 Subject: ARM64: dts: meson-gxl-khadas-vim: Add GPIO lines names This patch describes the GPIO lines usage on the Khadas VIM board. This is useful in the debugfs gpio file and using the cdev gpio API. Signed-off-by: Neil Armstrong [khilman: minor whitespace fix] Signed-off-by: Kevin Hilman --- .../dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 56 ++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 72c5a9f64ca8..3fbaf79ce8b0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -105,6 +105,62 @@ linux,rc-map-name = "rc-geekbox"; }; +&pinctrl_aobus { + gpio-line-names = "UART TX", + "UART RX", + "Power Key In", + "J9 Header Pin35", + "J9 Header Pin16", + "J9 Header Pin15", + "J9 Header Pin33", + "IR In", + "HDMI CEC", + "SYS LED"; +}; + +&pinctrl_periphs { + gpio-line-names = /* Bank GPIOZ */ + "", "", "", "", "", "", "", + "", "", "", "", "", "", "", + "Power OFF", + "VCCK Enable", + /* Bank GPIOH */ + "HDMI HPD", "HDMI SDA", "HDMI SCL", + "HDMI_5V_EN", "SPDIF", + "J9 Header Pin37", + "J9 Header Pin30", + "J9 Header Pin29", + "J9 Header Pin32", + "J9 Header Pin31", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", + "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", + "eMMC Clk", "eMMC Reset", "eMMC CMD", + "", "BOOT_MODE", "", "", "eMMC Data Strobe", + /* Bank CARD */ + "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", + "SDCard D3", "SDCard D2", "SDCard Det", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", + "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK", + "VCCK Regulator", "VDDEE Regulator", + /* Bank GPIOX */ + "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2", + "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD", + "WIFI Power Enable", "WIFI WAKE HOST", + "Bluetooth PCM DOUT", "Bluetooth PCM DIN", + "Bluetooth PCM SYNC", "Bluetooth PCM CLK", + "Bluetooth UART TX", "Bluetooth UART RX", + "Bluetooth UART CTS", "Bluetooth UART RTS", + "WIFI 32K", "Bluetooth Enable", + "Bluetooth WAKE HOST", + /* Bank GPIOCLK */ + "", "J9 Header Pin39", + /* GPIO_TEST_N */ + ""; +}; + &pwm_AO_ab { status = "okay"; pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; -- cgit From 12ada0513d7a053e32265da1bb34fa1dc07f0414 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 28 Jul 2017 15:54:44 +0200 Subject: ARM64: dts: meson-gxbb-nanopi-k2: Add GPIO lines names This patch describes the GPIO lines usage on the Nanopi K2 board. This is useful in the debugfs gpio file and using the cdev gpio API. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 58 ++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index fa462831ccaf..9697a7a79464 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -175,6 +175,64 @@ pinctrl-names = "default"; }; +&pinctrl_aobus { + gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In", + "VCCK En", "CON1 Header Pin31", + "I2S Header Pin6", "IR In", "I2S Header Pin7", + "I2S Header Pin3", "I2S Header Pin4", + "I2S Header Pin5", "HDMI CEC", "SYS LED"; +}; + +&pinctrl_periphs { + gpio-line-names = /* Bank GPIOZ */ + "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", + "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", + "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En", + "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3", + "Eth PHY nRESET", "Eth PHY Intc", + /* Bank GPIOH */ + "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", + "CON1 Header Pin33", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4", + "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk", + "eMMC Reset", "eMMC CMD", + "", "", "", "", "eMMC DS", + "", "", + /* Bank CARD */ + "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", + "SDCard D3", "SDCard D2", "SDCard Det", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", + "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK", + "VDDEE Regulator", "VCCK Regulator", + /* Bank GPIOY */ + "CON1 Header Pin7", "CON1 Header Pin11", + "CON1 Header Pin13", "CON1 Header Pin15", + "CON1 Header Pin18", "CON1 Header Pin19", + "CON1 Header Pin22", "CON1 Header Pin21", + "CON1 Header Pin24", "CON1 Header Pin23", + "CON1 Header Pin26", "CON1 Header Pin29", + "CON1 Header Pin32", "CON1 Header Pin8", + "CON1 Header Pin10", "CON1 Header Pin16", + "CON1 Header Pin12", + /* Bank GPIOX */ + "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2", + "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD", + "WIFI Power Enable", "WIFI WAKE HOST", + "Bluetooth PCM DOUT", "Bluetooth PCM DIN", + "Bluetooth PCM SYNC", "Bluetooth PCM CLK", + "Bluetooth UART TX", "Bluetooth UART RX", + "Bluetooth UART CTS", "Bluetooth UART RTS", + "", "", "", "WIFI 32K", "Bluetooth Enable", + "Bluetooth WAKE HOST", + /* Bank GPIOCLK */ + "", "CON1 Header Pin35", "", "", + /* GPIO_TEST_N */ + ""; +}; + &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; -- cgit From f72d6f6037b7b07927f78e159e4949b8e0263258 Mon Sep 17 00:00:00 2001 From: Helmut Klein Date: Wed, 21 Jun 2017 16:42:11 +0200 Subject: ARM64: dts: meson-gx: use stable UART bindings with correct gate clock This patch switches to the stable UART bindings but also add the correct gate clock to the non-AO UART nodes for GXBB and GXL SoCs. Acked-by: Jerome Brunet Signed-off-by: Helmut Klein Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 12 +++++------- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 25 +++++++++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 25 +++++++++++++++++++++++++ 3 files changed, 55 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index edd31cf0648e..73132d685f2e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -225,7 +225,7 @@ }; uart_A: serial@84c0 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; reg = <0x0 0x84c0 0x0 0x14>; interrupts = ; clocks = <&xtal>; @@ -233,7 +233,7 @@ }; uart_B: serial@84dc { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; reg = <0x0 0x84dc 0x0 0x14>; interrupts = ; clocks = <&xtal>; @@ -279,7 +279,7 @@ }; uart_C: serial@8700 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; reg = <0x0 0x8700 0x0 0x14>; interrupts = ; clocks = <&xtal>; @@ -381,18 +381,16 @@ }; uart_AO: serial@4c0 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; reg = <0x0 0x004c0 0x0 0x14>; interrupts = ; - clocks = <&xtal>; status = "disabled"; }; uart_AO_B: serial@4e0 { - compatible = "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; reg = <0x0 0x004e0 0x0 0x14>; interrupts = ; - clocks = <&xtal>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 17d3efdf1469..ea53cc248ef4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -682,6 +682,31 @@ clocks = <&clkc CLKID_SPI>; }; +&uart_A { + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_AO { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_AO_B { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "core", "baud"; +}; + +&uart_C { + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "core", "baud"; +}; + &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 8d4f3160a0ee..9e674441fd90 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -623,6 +623,31 @@ clocks = <&clkc CLKID_SPI>; }; +&uart_A { + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "core", "baud"; +}; + +&uart_AO { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_AO_B { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "core", "baud"; +}; + +&uart_C { + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "core", "baud"; +}; + &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; }; -- cgit