From 1da53d23a41c5f77963984d8da5623ed56918ada Mon Sep 17 00:00:00 2001 From: Ivan Bornyakov Date: Fri, 30 Dec 2022 12:29:20 +0300 Subject: fpga: microchip-spi: move SPI I/O buffers out of stack As spi-summary doc says: > I/O buffers use the usual Linux rules, and must be DMA-safe. > You'd normally allocate them from the heap or free page pool. > Don't use the stack, or anything that's declared "static". Replace spi_write() with spi_write_then_read(), which is dma-safe for on-stack buffers. Use cacheline aligned buffers for transfers used in spi_sync_transfer(). Although everything works OK with stack-located I/O buffers, better follow the doc to be safe. Fixes: 5f8d4a900830 ("fpga: microchip-spi: add Microchip MPF FPGA manager") Signed-off-by: Ivan Bornyakov Acked-by: Conor Dooley Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20221230092922.18822-2-i.bornyakov@metrotek.ru Signed-off-by: Xu Yilun --- drivers/fpga/microchip-spi.c | 93 ++++++++++++++++++++++---------------------- 1 file changed, 47 insertions(+), 46 deletions(-) (limited to 'drivers/fpga/microchip-spi.c') diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c index 7436976ea904..bb69f5beefe7 100644 --- a/drivers/fpga/microchip-spi.c +++ b/drivers/fpga/microchip-spi.c @@ -42,46 +42,55 @@ struct mpf_priv { struct spi_device *spi; bool program_mode; + u8 tx __aligned(ARCH_KMALLOC_MINALIGN); + u8 rx; }; -static int mpf_read_status(struct spi_device *spi) +static int mpf_read_status(struct mpf_priv *priv) { - u8 status = 0, status_command = MPF_SPI_READ_STATUS; - struct spi_transfer xfers[2] = { 0 }; - int ret; - /* * HW status is returned on MISO in the first byte after CS went * active. However, first reading can be inadequate, so we submit * two identical SPI transfers and use result of the later one. */ - xfers[0].tx_buf = &status_command; - xfers[1].tx_buf = &status_command; - xfers[0].rx_buf = &status; - xfers[1].rx_buf = &status; - xfers[0].len = 1; - xfers[1].len = 1; - xfers[0].cs_change = 1; + struct spi_transfer xfers[2] = { + { + .tx_buf = &priv->tx, + .rx_buf = &priv->rx, + .len = 1, + .cs_change = 1, + }, { + .tx_buf = &priv->tx, + .rx_buf = &priv->rx, + .len = 1, + }, + }; + u8 status; + int ret; + + priv->tx = MPF_SPI_READ_STATUS; + + ret = spi_sync_transfer(priv->spi, xfers, 2); + if (ret) + return ret; - ret = spi_sync_transfer(spi, xfers, 2); + status = priv->rx; if ((status & MPF_STATUS_SPI_VIOLATION) || (status & MPF_STATUS_SPI_ERROR)) - ret = -EIO; + return -EIO; - return ret ? : status; + return status; } static enum fpga_mgr_states mpf_ops_state(struct fpga_manager *mgr) { struct mpf_priv *priv = mgr->priv; - struct spi_device *spi; bool program_mode; int status; - spi = priv->spi; program_mode = priv->program_mode; - status = mpf_read_status(spi); + status = mpf_read_status(priv); if (!program_mode && !status) return FPGA_MGR_STATE_OPERATING; @@ -186,12 +195,12 @@ static int mpf_ops_parse_header(struct fpga_manager *mgr, } /* Poll HW status until busy bit is cleared and mask bits are set. */ -static int mpf_poll_status(struct spi_device *spi, u8 mask) +static int mpf_poll_status(struct mpf_priv *priv, u8 mask) { int status, retries = MPF_STATUS_POLL_RETRIES; while (retries--) { - status = mpf_read_status(spi); + status = mpf_read_status(priv); if (status < 0) return status; @@ -205,32 +214,32 @@ static int mpf_poll_status(struct spi_device *spi, u8 mask) return -EBUSY; } -static int mpf_spi_write(struct spi_device *spi, const void *buf, size_t buf_size) +static int mpf_spi_write(struct mpf_priv *priv, const void *buf, size_t buf_size) { - int status = mpf_poll_status(spi, 0); + int status = mpf_poll_status(priv, 0); if (status < 0) return status; - return spi_write(spi, buf, buf_size); + return spi_write_then_read(priv->spi, buf, buf_size, NULL, 0); } -static int mpf_spi_write_then_read(struct spi_device *spi, +static int mpf_spi_write_then_read(struct mpf_priv *priv, const void *txbuf, size_t txbuf_size, void *rxbuf, size_t rxbuf_size) { const u8 read_command[] = { MPF_SPI_READ_DATA }; int ret; - ret = mpf_spi_write(spi, txbuf, txbuf_size); + ret = mpf_spi_write(priv, txbuf, txbuf_size); if (ret) return ret; - ret = mpf_poll_status(spi, MPF_STATUS_READY); + ret = mpf_poll_status(priv, MPF_STATUS_READY); if (ret < 0) return ret; - return spi_write_then_read(spi, read_command, sizeof(read_command), + return spi_write_then_read(priv->spi, read_command, sizeof(read_command), rxbuf, rxbuf_size); } @@ -242,7 +251,6 @@ static int mpf_ops_write_init(struct fpga_manager *mgr, const u8 isc_en_command[] = { MPF_SPI_ISC_ENABLE }; struct mpf_priv *priv = mgr->priv; struct device *dev = &mgr->dev; - struct spi_device *spi; u32 isc_ret = 0; int ret; @@ -251,9 +259,7 @@ static int mpf_ops_write_init(struct fpga_manager *mgr, return -EOPNOTSUPP; } - spi = priv->spi; - - ret = mpf_spi_write_then_read(spi, isc_en_command, sizeof(isc_en_command), + ret = mpf_spi_write_then_read(priv, isc_en_command, sizeof(isc_en_command), &isc_ret, sizeof(isc_ret)); if (ret || isc_ret) { dev_err(dev, "Failed to enable ISC: spi_ret %d, isc_ret %u\n", @@ -261,7 +267,7 @@ static int mpf_ops_write_init(struct fpga_manager *mgr, return -EFAULT; } - ret = mpf_spi_write(spi, program_mode, sizeof(program_mode)); + ret = mpf_spi_write(priv, program_mode, sizeof(program_mode)); if (ret) { dev_err(dev, "Failed to enter program mode: %d\n", ret); return ret; @@ -274,11 +280,9 @@ static int mpf_ops_write_init(struct fpga_manager *mgr, static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count) { - u8 spi_frame_command[] = { MPF_SPI_FRAME }; struct spi_transfer xfers[2] = { 0 }; struct mpf_priv *priv = mgr->priv; struct device *dev = &mgr->dev; - struct spi_device *spi; int ret, i; if (count % MPF_SPI_FRAME_SIZE) { @@ -287,18 +291,18 @@ static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count return -EINVAL; } - spi = priv->spi; - - xfers[0].tx_buf = spi_frame_command; - xfers[0].len = sizeof(spi_frame_command); + xfers[0].tx_buf = &priv->tx; + xfers[0].len = 1; for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) { xfers[1].tx_buf = buf + i * MPF_SPI_FRAME_SIZE; xfers[1].len = MPF_SPI_FRAME_SIZE; - ret = mpf_poll_status(spi, 0); - if (ret >= 0) - ret = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers)); + ret = mpf_poll_status(priv, 0); + if (ret >= 0) { + priv->tx = MPF_SPI_FRAME; + ret = spi_sync_transfer(priv->spi, xfers, ARRAY_SIZE(xfers)); + } if (ret) { dev_err(dev, "Failed to write bitstream frame %d/%zu\n", @@ -317,12 +321,9 @@ static int mpf_ops_write_complete(struct fpga_manager *mgr, const u8 release_command[] = { MPF_SPI_RELEASE }; struct mpf_priv *priv = mgr->priv; struct device *dev = &mgr->dev; - struct spi_device *spi; int ret; - spi = priv->spi; - - ret = mpf_spi_write(spi, isc_dis_command, sizeof(isc_dis_command)); + ret = mpf_spi_write(priv, isc_dis_command, sizeof(isc_dis_command)); if (ret) { dev_err(dev, "Failed to disable ISC: %d\n", ret); return ret; @@ -330,7 +331,7 @@ static int mpf_ops_write_complete(struct fpga_manager *mgr, usleep_range(1000, 2000); - ret = mpf_spi_write(spi, release_command, sizeof(release_command)); + ret = mpf_spi_write(priv, release_command, sizeof(release_command)); if (ret) { dev_err(dev, "Failed to exit program mode: %d\n", ret); return ret; -- cgit From 88e705697e801299a13ecaf2ba54599964fe711c Mon Sep 17 00:00:00 2001 From: Ivan Bornyakov Date: Fri, 30 Dec 2022 12:29:21 +0300 Subject: fpga: microchip-spi: rewrite status polling in a time measurable way MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Original busy loop with retries count in mpf_poll_status() is not too reliable, as it takes different times on different systems. Replace it with read_poll_timeout() macro. While at it, fix polling stop condition to met function's original intention declared in the comment. The issue with original polling stop condition is that it stops if any of mask bits is set, while intention was to stop if all mask bits is set. This was not noticible because only MPF_STATUS_READY is passed as mask argument and it is BIT(1). Fixes: 5f8d4a900830 ("fpga: microchip-spi: add Microchip MPF FPGA manager") Signed-off-by: Ivan Bornyakov Reviewed-by: Ilpo Järvinen Acked-by: Conor Dooley Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20221230092922.18822-3-i.bornyakov@metrotek.ru Signed-off-by: Xu Yilun --- drivers/fpga/microchip-spi.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) (limited to 'drivers/fpga/microchip-spi.c') diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c index bb69f5beefe7..137fafdf57a6 100644 --- a/drivers/fpga/microchip-spi.c +++ b/drivers/fpga/microchip-spi.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include @@ -33,7 +34,7 @@ #define MPF_BITS_PER_COMPONENT_SIZE 22 -#define MPF_STATUS_POLL_RETRIES 10000 +#define MPF_STATUS_POLL_TIMEOUT (2 * USEC_PER_SEC) #define MPF_STATUS_BUSY BIT(0) #define MPF_STATUS_READY BIT(1) #define MPF_STATUS_SPI_VIOLATION BIT(2) @@ -194,24 +195,25 @@ static int mpf_ops_parse_header(struct fpga_manager *mgr, return 0; } -/* Poll HW status until busy bit is cleared and mask bits are set. */ static int mpf_poll_status(struct mpf_priv *priv, u8 mask) { - int status, retries = MPF_STATUS_POLL_RETRIES; + int ret, status; - while (retries--) { - status = mpf_read_status(priv); - if (status < 0) - return status; - - if (status & MPF_STATUS_BUSY) - continue; - - if (!mask || (status & mask)) - return status; - } + /* + * Busy poll HW status. Polling stops if any of the following + * conditions are met: + * - timeout is reached + * - mpf_read_status() returns an error + * - busy bit is cleared AND mask bits are set + */ + ret = read_poll_timeout(mpf_read_status, status, + (status < 0) || + ((status & (MPF_STATUS_BUSY | mask)) == mask), + 0, MPF_STATUS_POLL_TIMEOUT, false, priv); + if (ret < 0) + return ret; - return -EBUSY; + return status; } static int mpf_spi_write(struct mpf_priv *priv, const void *buf, size_t buf_size) -- cgit From 9d94ec985702a454638d49816fa66718cb8b228a Mon Sep 17 00:00:00 2001 From: Ivan Bornyakov Date: Fri, 30 Dec 2022 12:29:22 +0300 Subject: fpga: microchip-spi: separate data frame write routine mpf_ops_write() function writes bitstream data to the FPGA by a smaller frames. Introduce mpf_spi_frame_write() function which is for writing a single data frame and use it in mpf_ops_write(). No functional changes intended. Signed-off-by: Ivan Bornyakov Acked-by: Conor Dooley Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20221230092922.18822-4-i.bornyakov@metrotek.ru Signed-off-by: Xu Yilun --- drivers/fpga/microchip-spi.c | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-) (limited to 'drivers/fpga/microchip-spi.c') diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c index 137fafdf57a6..d6070e7f5205 100644 --- a/drivers/fpga/microchip-spi.c +++ b/drivers/fpga/microchip-spi.c @@ -280,9 +280,30 @@ static int mpf_ops_write_init(struct fpga_manager *mgr, return 0; } +static int mpf_spi_frame_write(struct mpf_priv *priv, const char *buf) +{ + struct spi_transfer xfers[2] = { + { + .tx_buf = &priv->tx, + .len = 1, + }, { + .tx_buf = buf, + .len = MPF_SPI_FRAME_SIZE, + }, + }; + int ret; + + ret = mpf_poll_status(priv, 0); + if (ret < 0) + return ret; + + priv->tx = MPF_SPI_FRAME; + + return spi_sync_transfer(priv->spi, xfers, ARRAY_SIZE(xfers)); +} + static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count) { - struct spi_transfer xfers[2] = { 0 }; struct mpf_priv *priv = mgr->priv; struct device *dev = &mgr->dev; int ret, i; @@ -293,19 +314,8 @@ static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count return -EINVAL; } - xfers[0].tx_buf = &priv->tx; - xfers[0].len = 1; - for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) { - xfers[1].tx_buf = buf + i * MPF_SPI_FRAME_SIZE; - xfers[1].len = MPF_SPI_FRAME_SIZE; - - ret = mpf_poll_status(priv, 0); - if (ret >= 0) { - priv->tx = MPF_SPI_FRAME; - ret = spi_sync_transfer(priv->spi, xfers, ARRAY_SIZE(xfers)); - } - + ret = mpf_spi_frame_write(priv, buf + i * MPF_SPI_FRAME_SIZE); if (ret) { dev_err(dev, "Failed to write bitstream frame %d/%zu\n", i, count / MPF_SPI_FRAME_SIZE); -- cgit