From b2499518b5ad7e28bb3ed348fd3f370eeb1e36c0 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 29 Aug 2011 16:42:11 +0300 Subject: mmc: core: add eMMC hardware reset support eMMC's may have a hardware reset line. This patch provides a host controller operation to implement hardware reset and a function to reset and reinitialize the card. Also, for MMC, the reset is always performed before initialization. The host must set the new host capability MMC_CAP_HW_RESET to enable hardware reset. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- include/linux/mmc/mmc.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/mmc/mmc.h') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 5a794cb503ea..ed8fca890ee2 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -272,6 +272,7 @@ struct _mmc_csd { #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ +#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ #define EXT_CSD_WR_REL_PARAM 166 /* RO */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_PART_CONFIG 179 /* R/W */ @@ -328,6 +329,9 @@ struct _mmc_csd { #define EXT_CSD_SEC_BD_BLK_EN BIT(2) #define EXT_CSD_SEC_GB_CL_EN BIT(4) +#define EXT_CSD_RST_N_EN_MASK 0x3 +#define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */ + /* * MMC_SWITCH access modes */ -- cgit From b87d8dbf6c410b5f2d9b6893c85baa06aa131c7c Mon Sep 17 00:00:00 2001 From: Girish K S Date: Fri, 23 Sep 2011 20:41:47 +0530 Subject: mmc: core: eMMC 4.5 Power Class Selection Feature This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: Girish K S Signed-off-by: Chris Ball --- include/linux/mmc/mmc.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux/mmc/mmc.h') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index ed8fca890ee2..50af22730c74 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -279,10 +279,15 @@ struct _mmc_csd { #define EXT_CSD_ERASED_MEM_CONT 181 /* RO */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ #define EXT_CSD_HS_TIMING 185 /* R/W */ +#define EXT_CSD_POWER_CLASS 187 /* R/W */ #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_STRUCTURE 194 /* RO */ #define EXT_CSD_CARD_TYPE 196 /* RO */ #define EXT_CSD_PART_SWITCH_TIME 199 /* RO */ +#define EXT_CSD_PWR_CL_52_195 200 /* RO */ +#define EXT_CSD_PWR_CL_26_195 201 /* RO */ +#define EXT_CSD_PWR_CL_52_360 202 /* RO */ +#define EXT_CSD_PWR_CL_26_360 203 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ #define EXT_CSD_S_A_TIMEOUT 217 /* RO */ #define EXT_CSD_REL_WR_SEC_C 222 /* RO */ @@ -294,6 +299,11 @@ struct _mmc_csd { #define EXT_CSD_SEC_ERASE_MULT 230 /* RO */ #define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */ #define EXT_CSD_TRIM_MULT 232 /* RO */ +#define EXT_CSD_PWR_CL_200_195 236 /* RO */ +#define EXT_CSD_PWR_CL_200_360 237 /* RO */ +#define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */ +#define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */ +#define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ /* * EXT_CSD field definitions @@ -332,6 +342,10 @@ struct _mmc_csd { #define EXT_CSD_RST_N_EN_MASK 0x3 #define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */ +#define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */ +#define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */ +#define EXT_CSD_PWR_CL_8BIT_SHIFT 4 +#define EXT_CSD_PWR_CL_4BIT_SHIFT 0 /* * MMC_SWITCH access modes */ -- cgit From e0c368d571d946ff40f068344b5c2df90c93dd2e Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 6 Oct 2011 23:41:38 +0900 Subject: mmc: core: general purpose MMC partition support. It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon Acked-by: Andrei Warkentin Signed-off-by: Chris Ball --- include/linux/mmc/mmc.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux/mmc/mmc.h') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 50af22730c74..ea558eb44c79 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -270,6 +270,7 @@ struct _mmc_csd { * EXT_CSD fields */ +#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ @@ -313,7 +314,9 @@ struct _mmc_csd { #define EXT_CSD_PART_CONFIG_ACC_MASK (0x7) #define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1) -#define EXT_CSD_PART_CONFIG_ACC_BOOT1 (0x2) +#define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4) + +#define EXT_CSD_PART_SUPPORT_PART_EN (0x1) #define EXT_CSD_CMD_SET_NORMAL (1<<0) #define EXT_CSD_CMD_SET_SECURE (1<<1) -- cgit From b23cf0bd55b0c6b703982446f679e00d6d929524 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Fri, 23 Sep 2011 14:15:29 +0900 Subject: mmc: core: Add default timeout value for CMD6 EXT_CSD[248] includes the default maximum timeout for CMD6. This field is added at eMMC4.5 Spec. And it can be used for default timeout except for some operations which don't define the timeout (i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec. Signed-off-by: Seungwon Jeon Signed-off-by: Jaehoon Chung Signed-off-by: Chris Ball --- include/linux/mmc/mmc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/mmc/mmc.h') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index ea558eb44c79..cd63c2dc95cc 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -305,6 +305,7 @@ struct _mmc_csd { #define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */ #define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */ #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ +#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ /* * EXT_CSD field definitions -- cgit From bec8726abc72bf30d2743a722aa37cd69e7a0580 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Thu, 13 Oct 2011 12:04:16 +0530 Subject: mmc: core: Add Power Off Notify Feature eMMC 4.5 This patch adds support for the power off notify feature, available in eMMC 4.5 devices. If the host has support for this feature, then the mmc core will notify the device by setting the POWER_OFF_NOTIFICATION byte in the extended csd register with a value of 1 (POWER_ON). For suspend mode short timeout is used, whereas for the normal poweroff long timeout is used. Signed-off-by: Girish K S Signed-off-by: Jaehoon Chung Signed-off-by: Chris Ball --- include/linux/mmc/mmc.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/mmc/mmc.h') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index cd63c2dc95cc..02e9e3de9609 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -270,6 +270,7 @@ struct _mmc_csd { * EXT_CSD fields */ +#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ @@ -346,6 +347,11 @@ struct _mmc_csd { #define EXT_CSD_RST_N_EN_MASK 0x3 #define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */ +#define EXT_CSD_NO_POWER_NOTIFICATION 0 +#define EXT_CSD_POWER_ON 1 +#define EXT_CSD_POWER_OFF_SHORT 2 +#define EXT_CSD_POWER_OFF_LONG 3 + #define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */ #define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */ #define EXT_CSD_PWR_CL_8BIT_SHIFT 4 -- cgit From d9ddd62943ee07a75d0428ffcf52f1a747a28c39 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Fri, 14 Oct 2011 14:15:48 +0900 Subject: mmc: core: mmc sanitize feature support for v4.5 In the v4.5, there's no secure erase & trim support. Instead it supports the sanitize feature. Signed-off-by: Kyungmin Park Signed-off-by: Jaehoon Chung Signed-off-by: Chris Ball --- include/linux/mmc/mmc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/mmc/mmc.h') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 02e9e3de9609..8a05a21fc7c3 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -275,6 +275,7 @@ struct _mmc_csd { #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ +#define EXT_CSD_SANITIZE_START 165 /* W */ #define EXT_CSD_WR_REL_PARAM 166 /* RO */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_PART_CONFIG 179 /* R/W */ @@ -343,6 +344,7 @@ struct _mmc_csd { #define EXT_CSD_SEC_ER_EN BIT(0) #define EXT_CSD_SEC_BD_BLK_EN BIT(2) #define EXT_CSD_SEC_GB_CL_EN BIT(4) +#define EXT_CSD_SEC_SANITIZE BIT(6) /* v4.5 only */ #define EXT_CSD_RST_N_EN_MASK 0x3 #define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */ -- cgit From 881d1c25f765938a95def5afe39486ce39f9fc96 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Fri, 14 Oct 2011 14:03:21 +0900 Subject: mmc: core: Add cache control for eMMC4.5 device This patch adds cache feature of eMMC4.5 Spec. If device supports cache capability, host can utilize some specific operations. Signed-off-by: Seungwon Jeon Signed-off-by: Jaehoon Chung Signed-off-by: Chris Ball --- include/linux/mmc/mmc.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/mmc/mmc.h') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 8a05a21fc7c3..160e4c5bdae0 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -270,6 +270,8 @@ struct _mmc_csd { * EXT_CSD fields */ +#define EXT_CSD_FLUSH_CACHE 32 /* W */ +#define EXT_CSD_CACHE_CTRL 33 /* R/W */ #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ @@ -308,6 +310,7 @@ struct _mmc_csd { #define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */ #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ +#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ /* * EXT_CSD field definitions -- cgit From eb0d8f135b6730d6d0324a064664d121334290e7 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Tue, 18 Oct 2011 01:26:42 -0400 Subject: mmc: core: support HPI send command HPI command is defined in eMMC4.41. This feature is important for eMMC4.5 devices. Signed-off-by: Jaehoon Chung Signed-off-by: Chris Ball --- include/linux/mmc/mmc.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/mmc/mmc.h') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 160e4c5bdae0..0e7135697d11 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -276,6 +276,7 @@ struct _mmc_csd { #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ +#define EXT_CSD_HPI_MGMT 161 /* R/W */ #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ #define EXT_CSD_SANITIZE_START 165 /* W */ #define EXT_CSD_WR_REL_PARAM 166 /* RO */ @@ -288,6 +289,7 @@ struct _mmc_csd { #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_STRUCTURE 194 /* RO */ #define EXT_CSD_CARD_TYPE 196 /* RO */ +#define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */ #define EXT_CSD_PART_SWITCH_TIME 199 /* RO */ #define EXT_CSD_PWR_CL_52_195 200 /* RO */ #define EXT_CSD_PWR_CL_26_195 201 /* RO */ @@ -311,6 +313,7 @@ struct _mmc_csd { #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ +#define EXT_CSD_HPI_FEATURES 503 /* RO */ /* * EXT_CSD field definitions -- cgit