Merge tag 'samsung-dt64-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v6.3, part two

Big cleanup and rework towards achieving zero-warning of dtbs_check and
dtc W=1:
 - drop or correct incorrect properties in several boards,
 - add dummy regulator supplies when necessary to fullfil bindings
   requirements,
 - use lowercase hex,
 - move non-MMIO exynos-bus nodes out of soc node,
 - add unit address to USB DWC3 nodes.

* tag 'samsung-dt64-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos7
  arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos5433
  arm64: dts: exynos: move exynos-bus nodes out of soc in Exynos5433
  arm64: dts: exynos: use lowercase hex addresses
  arm64: dts: exynos: correct wlf,micd-dbtime on TM2
  arm64: dts: exynos: add interrupt-controller to WM5110 on TM2
  arm64: dts: exynos: add VPH_PWR regulator on TM2
  arm64: dts: exynos: correct Bluetooth LED triger on E850-96
  arm64: dts: exynos: add ADC supply on Exynos7 Espresso
  arm64: dts: exynos: disable non-working GPU on Exynos7 Espresso
  arm64: dts: exynos: drop unsupported UFS properties in ExynosAutov9 SADK

Link: https://lore.kernel.org/r/20230129143944.5104-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 files changed, 39 insertions, 30 deletions

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
index 72ccf18eb9d1..540b4d6c9067 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
@@ -6,7 +6,7 @@
  * Chanwoo Choi <cw00.choi@samsung.com>
  */
 
-&soc {
+/ {
 	bus_g2d_400: bus0 {
 		compatible = "samsung,exynos-bus";
 		clocks = <&cmu_top CLK_ACLK_G2D_400>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 6f701297a665..f54f30633417 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -99,11 +99,18 @@
 
 			DIOVDD-supply = <&ldo3_reg>;
 			DVDD-supply = <&ldo3_reg>;
-			/* PVDD-supply to VPH_PWR */
+			PVDD-supply = <&vph_pwr_regulator>;
 		};
 	};
 
-	irda_regulator: irda-regulator {
+	vph_pwr_regulator: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "VPH_PWR";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+	};
+
+	irda_regulator: regulator-irda {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
@@ -1278,11 +1285,13 @@
 
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		wlf,micd-detect-debounce = <300>;
 		wlf,micd-bias-start-time = <0x1>;
 		wlf,micd-rate = <0x7>;
-		wlf,micd-dbtime = <0x1>;
+		wlf,micd-dbtime = <0x2>;
 		wlf,micd-force-micbias;
 		wlf,micd-configs = <0x0 1 0>;
 		wlf,hpdet-channel = <1>;
@@ -1298,6 +1307,8 @@
 		CPVDD-supply = <&ldo18_reg>;
 		DBVDD2-supply = <&ldo18_reg>;
 		DBVDD3-supply = <&ldo18_reg>;
+		SPKVDDL-supply = <&vph_pwr_regulator>;
+		SPKVDDR-supply = <&vph_pwr_regulator>;
 
 		controller-data {
 			samsung,spi-feedback-delay = <0>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 47b5ac06f0d6..5519a80576c5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -351,7 +351,7 @@
 		compatible = "arm,psci";
 		method = "smc";
 		cpu_off = <0x84000002>;
-		cpu_on = <0xC4000003>;
+		cpu_on = <0xc4000003>;
 	};
 
 	soc: soc@0 {
@@ -1020,7 +1020,7 @@
 
 		dsi: dsi@13900000 {
 			compatible = "samsung,exynos5433-mipi-dsi";
-			reg = <0x13900000 0xC0>;
+			reg = <0x13900000 0xc0>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&mipi_phy 1>;
 			phy-names = "dsim";
@@ -1272,7 +1272,7 @@
 
 		mfc: codec@152e0000 {
 			compatible = "samsung,exynos5433-mfc";
-			reg = <0x152E0000 0x10000>;
+			reg = <0x152e0000 0x10000>;
 			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "pclk", "aclk", "aclk_xiu";
 			clocks = <&cmu_mfc CLK_PCLK_MFC>,
@@ -1329,7 +1329,7 @@
 
 		sysmmu_gscl0: sysmmu@13c80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C80000 0x1000>;
+			reg = <0x13c80000 0x1000>;
 			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
@@ -1340,7 +1340,7 @@
 
 		sysmmu_gscl1: sysmmu@13c90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C90000 0x1000>;
+			reg = <0x13c90000 0x1000>;
 			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
@@ -1351,7 +1351,7 @@
 
 		sysmmu_gscl2: sysmmu@13ca0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13CA0000 0x1000>;
+			reg = <0x13ca0000 0x1000>;
 			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
@@ -1742,7 +1742,7 @@
 			status = "disabled";
 		};
 
-		usbdrd30: usbdrd {
+		usbdrd30: usb@15400000 {
 			compatible = "samsung,exynos5433-dwusb3";
 			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
 				<&cmu_fsys CLK_SCLK_USBDRD30>,
@@ -1751,16 +1751,16 @@
 			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15400000 0x10000>;
 			status = "disabled";
 
-			usbdrd_dwc3: usb@15400000 {
+			usbdrd_dwc3: usb@0 {
 				compatible = "snps,dwc3";
 				clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
 					<&cmu_fsys CLK_ACLK_USBDRD30>,
 					<&cmu_fsys CLK_SCLK_USBDRD30>;
 				clock-names = "ref", "bus_early", "suspend";
-				reg = <0x15400000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -1795,7 +1795,7 @@
 			status = "disabled";
 		};
 
-		usbhost30: usbhost {
+		usbhost30: usb@15a00000 {
 			compatible = "samsung,exynos5433-dwusb3";
 			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
 				<&cmu_fsys CLK_SCLK_USBHOST30>,
@@ -1804,16 +1804,16 @@
 			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15a00000 0x10000>;
 			status = "disabled";
 
-			usbhost_dwc3: usb@15a00000 {
+			usbhost_dwc3: usb@0 {
 				compatible = "snps,dwc3";
 				clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
 					<&cmu_fsys CLK_ACLK_USBHOST30>,
 					<&cmu_fsys CLK_SCLK_USBHOST30>;
 				clock-names = "ref", "bus_early", "suspend";
-				reg = <0x15a00000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index b846c0be90e3..f3f4a6ab4b49 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -28,7 +28,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x0 0x40000000 0x0 0xC0000000>;
+		reg = <0x0 0x40000000 0x0 0xc0000000>;
 	};
 
 	usb30_vbus_reg: regulator-usb30 {
@@ -61,7 +61,6 @@
 
 &gpu {
 	mali-supply = <&buck6_reg>;
-	status = "okay";
 };
 
 &serial_2 {
@@ -79,6 +78,7 @@
 };
 
 &adc {
+	vdd-supply = <&ldo3_reg>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index f378d8629d88..b1fa68835b09 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -119,7 +119,7 @@
 		compatible = "arm,psci";
 		method = "smc";
 		cpu_off = <0x84000002>;
-		cpu_on = <0xC4000003>;
+		cpu_on = <0xc4000003>;
 	};
 
 	soc: soc@0 {
@@ -146,7 +146,7 @@
 
 		pdma0: dma-controller@10e10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10E10000 0x1000>;
+			reg = <0x10e10000 0x1000>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_fsys0 ACLK_PDMA0>;
 			clock-names = "apb_pclk";
@@ -155,7 +155,7 @@
 
 		pdma1: dma-controller@10eb0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10EB0000 0x1000>;
+			reg = <0x10eb0000 0x1000>;
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_fsys0 ACLK_PDMA1>;
 			clock-names = "apb_pclk";
@@ -690,7 +690,7 @@
 			#phy-cells = <1>;
 		};
 
-		usbdrd: usb {
+		usbdrd: usb@15400000 {
 			compatible = "samsung,exynos7-dwusb3";
 			clocks = <&clock_fsys0 ACLK_USBDRD300>,
 			       <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
@@ -699,11 +699,11 @@
 				"usbdrd30_axius_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15400000 0x10000>;
 
-			usb@15400000 {
+			usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x15400000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
index f52a55f644f7..6ed38912507f 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -106,7 +106,7 @@
 			gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_BLUETOOTH;
-			linux,default-trigger = "hci0rx";
+			linux,default-trigger = "hci0-power";
 			default-state = "off";
 		};
 	};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
index eec3192c0631..101f51bf565a 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -65,13 +65,11 @@
 &ufs_0 {
 	status = "okay";
 	vcc-supply = <&ufs_0_fixed_vcc_reg>;
-	vcc-fixed-regulator;
 };
 
 &ufs_1 {
 	status = "okay";
 	vcc-supply = <&ufs_1_fixed_vcc_reg>;
-	vcc-fixed-regulator;
 };
 
 &usi_0 {