diff options
| author | Konrad Dybcio <konrad.dybcio@somainline.org> | 2022-04-30 18:23:43 +0200 |
|---|---|---|
| committer | Bjorn Andersson <bjorn.andersson@linaro.org> | 2022-06-27 15:58:44 -0500 |
| commit | 6dad36ebe1cb219615ead56692cea816d144c645 (patch) | |
| tree | 735598f09cd7f4d14a933c34cf5d735520d275d9 | |
| parent | 4efbec42c050e9e59171822a3829c9a364e88611 (diff) | |
arm64: dts: qcom: msm8998-yoshino: Add USB extcon
While not strictly necessary, at least on maple, configure the USB extcon,
which requires two pins on Yoshino.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220430162353.607709-5-konrad.dybcio@somainline.org
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 878490f6dfa4..c016b4960edc 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -91,6 +91,14 @@ regulator-boot-on; }; + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_extcon_active &usb_vbus_active>; + }; + gpio-keys { compatible = "gpio-keys"; label = "Side buttons"; @@ -613,6 +621,13 @@ drive-strength = <2>; }; + usb_extcon_active: usb-extcon-active { + pins = "gpio38"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + hall_sensor0_default: acc-cover-open { pins = "gpio124"; function = "gpio"; @@ -628,6 +643,14 @@ bias-pull-up; }; + usb_vbus_active: usb-vbus-active { + pins = "gpio128"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + ts_vddio_en: ts-vddio-en-default { pins = "gpio133"; function = "gpio"; @@ -658,6 +681,7 @@ &usb3_dwc3 { /* Force to peripheral until we have Type-C hooked up */ dr_mode = "peripheral"; + extcon = <&extcon_usb>; }; &usb3phy { |