diff options
| author | Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> | 2022-06-13 13:54:05 +0530 |
|---|---|---|
| committer | Bjorn Andersson <bjorn.andersson@linaro.org> | 2022-06-25 14:47:17 -0500 |
| commit | a4c1fc8cff056461b9bd0e07e775f93073b4d527 (patch) | |
| tree | 8ce6206326af0f111cd8c1e02375d014c34186eb | |
| parent | 32d4541abe0f981cbcc45e142543d5811fd07692 (diff) | |
arm64: dts: qcom: sc7280-herobrine: Add lpi pinmux properties for CRD 3.0/3.1
Add LPASS LPI pinctrl properties, which are required for Audio
functionality on herobrine based platforms of rev5+
(aka CRD 3.0/3.1) boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1655108645-1517-5-git-send-email-quic_srivasam@quicinc.com
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 61 |
1 files changed, 61 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index 53feaed4da3f..d92575e8ab03 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -144,6 +144,67 @@ ap_ts_pen_1v8: &i2c13 { * - If a pin is totally internal to Qcard then it gets Qcard name. * - If a pin is not hooked up on Qcard, it gets no name. */ +&lpass_dmic01_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic01_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic01_data { + bias-pull-down; +}; + +&lpass_dmic23_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic23_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic23_data { + bias-pull-down; +}; + +&lpass_rx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_rx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_rx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&lpass_rx_swr_data_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_tx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; &pm8350c_gpios { gpio-line-names = "FLASH_STROBE_1", /* 1 */ |