summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTomasz Figa <t.figa@samsung.com>2014-07-02 19:40:44 +0200
committerKukjin Kim <kgene.kim@samsung.com>2014-07-19 04:32:18 +0900
commitd78c16ccde96eddf42942c093b241b5e5135b777 (patch)
tree3bedb6c54ec937d57d8d9e3f473739a78c1ae5ad
parent09ee2dac4c07016c6bc7577152822996c9a7c122 (diff)
ARM: SAMSUNG: Remove remaining legacy code
After refactoring suspend/resume, which was last part with dependencies on legacy code, all Kconfig symbols related to Samsung ATAGS support can be deselected and more unused code removed. This includes most of s5p-* code as well, as s5pv210 was their last user. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-rw-r--r--arch/arm/mach-s5pv210/include/mach/dma.h26
-rw-r--r--arch/arm/mach-s5pv210/include/mach/gpio.h140
-rw-r--r--arch/arm/mach-s5pv210/include/mach/hardware.h18
-rw-r--r--arch/arm/mach-s5pv210/include/mach/irqs.h137
-rw-r--r--arch/arm/mach-s5pv210/include/mach/map.h158
-rw-r--r--arch/arm/mach-s5pv210/include/mach/memory.h27
-rw-r--r--arch/arm/mach-s5pv210/include/mach/pm-core.h46
-rw-r--r--arch/arm/mach-s5pv210/include/mach/regs-clock.h2
-rw-r--r--arch/arm/mach-s5pv210/include/mach/regs-gpio.h41
-rw-r--r--arch/arm/mach-s5pv210/include/mach/regs-irq.h18
-rw-r--r--arch/arm/mach-s5pv210/setup-i2c0.c30
-rw-r--r--arch/arm/plat-samsung/Kconfig125
-rw-r--r--arch/arm/plat-samsung/Makefile9
-rw-r--r--arch/arm/plat-samsung/cpu.c1
-rw-r--r--arch/arm/plat-samsung/devs.c330
-rw-r--r--arch/arm/plat-samsung/include/plat/camport.h28
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu.h12
-rw-r--r--arch/arm/plat-samsung/include/plat/devs.h42
-rw-r--r--arch/arm/plat-samsung/include/plat/fb-core.h15
-rw-r--r--arch/arm/plat-samsung/include/plat/fb.h22
-rw-r--r--arch/arm/plat-samsung/include/plat/fimc-core.h51
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-cfg.h64
-rw-r--r--arch/arm/plat-samsung/include/plat/hdmi.h16
-rw-r--r--arch/arm/plat-samsung/include/plat/irqs.h72
-rw-r--r--arch/arm/plat-samsung/include/plat/mfc.h35
-rw-r--r--arch/arm/plat-samsung/include/plat/sdhci.h47
-rw-r--r--arch/arm/plat-samsung/include/plat/tv-core.h44
-rw-r--r--arch/arm/plat-samsung/pm-gpio.c4
-rw-r--r--arch/arm/plat-samsung/s5p-dev-mfc.c81
-rw-r--r--arch/arm/plat-samsung/s5p-dev-uart.c88
-rw-r--r--arch/arm/plat-samsung/s5p-irq-eint.c221
-rw-r--r--arch/arm/plat-samsung/s5p-irq-gpioint.c218
-rw-r--r--arch/arm/plat-samsung/s5p-irq-pm.c92
-rw-r--r--arch/arm/plat-samsung/s5p-irq.c31
-rw-r--r--arch/arm/plat-samsung/s5p-pm.c40
-rw-r--r--arch/arm/plat-samsung/s5p-sleep.S45
36 files changed, 14 insertions, 2362 deletions
diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h
deleted file mode 100644
index 201842a3769e..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
deleted file mode 100644
index 6c8b903c02e4..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* Practically, GPIO banks up to MP03 are the configurable gpio banks */
-
-/* GPIO bank sizes */
-#define S5PV210_GPIO_A0_NR (8)
-#define S5PV210_GPIO_A1_NR (4)
-#define S5PV210_GPIO_B_NR (8)
-#define S5PV210_GPIO_C0_NR (5)
-#define S5PV210_GPIO_C1_NR (5)
-#define S5PV210_GPIO_D0_NR (4)
-#define S5PV210_GPIO_D1_NR (6)
-#define S5PV210_GPIO_E0_NR (8)
-#define S5PV210_GPIO_E1_NR (5)
-#define S5PV210_GPIO_F0_NR (8)
-#define S5PV210_GPIO_F1_NR (8)
-#define S5PV210_GPIO_F2_NR (8)
-#define S5PV210_GPIO_F3_NR (6)
-#define S5PV210_GPIO_G0_NR (7)
-#define S5PV210_GPIO_G1_NR (7)
-#define S5PV210_GPIO_G2_NR (7)
-#define S5PV210_GPIO_G3_NR (7)
-#define S5PV210_GPIO_H0_NR (8)
-#define S5PV210_GPIO_H1_NR (8)
-#define S5PV210_GPIO_H2_NR (8)
-#define S5PV210_GPIO_H3_NR (8)
-#define S5PV210_GPIO_I_NR (7)
-#define S5PV210_GPIO_J0_NR (8)
-#define S5PV210_GPIO_J1_NR (6)
-#define S5PV210_GPIO_J2_NR (8)
-#define S5PV210_GPIO_J3_NR (8)
-#define S5PV210_GPIO_J4_NR (5)
-
-#define S5PV210_GPIO_MP01_NR (8)
-#define S5PV210_GPIO_MP02_NR (4)
-#define S5PV210_GPIO_MP03_NR (8)
-#define S5PV210_GPIO_MP04_NR (8)
-#define S5PV210_GPIO_MP05_NR (8)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5PV210_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
- S5PV210_GPIO_A0_START = 0,
- S5PV210_GPIO_A1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A0),
- S5PV210_GPIO_B_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A1),
- S5PV210_GPIO_C0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_B),
- S5PV210_GPIO_C1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C0),
- S5PV210_GPIO_D0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C1),
- S5PV210_GPIO_D1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D0),
- S5PV210_GPIO_E0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D1),
- S5PV210_GPIO_E1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E0),
- S5PV210_GPIO_F0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E1),
- S5PV210_GPIO_F1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F0),
- S5PV210_GPIO_F2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F1),
- S5PV210_GPIO_F3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F2),
- S5PV210_GPIO_G0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F3),
- S5PV210_GPIO_G1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G0),
- S5PV210_GPIO_G2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G1),
- S5PV210_GPIO_G3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G2),
- S5PV210_GPIO_H0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G3),
- S5PV210_GPIO_H1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H0),
- S5PV210_GPIO_H2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H1),
- S5PV210_GPIO_H3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H2),
- S5PV210_GPIO_I_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H3),
- S5PV210_GPIO_J0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_I),
- S5PV210_GPIO_J1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J0),
- S5PV210_GPIO_J2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
- S5PV210_GPIO_J3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
- S5PV210_GPIO_J4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
- S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
- S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
- S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
- S5PV210_GPIO_MP04_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03),
- S5PV210_GPIO_MP05_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04),
-};
-
-/* S5PV210 GPIO number definitions */
-#define S5PV210_GPA0(_nr) (S5PV210_GPIO_A0_START + (_nr))
-#define S5PV210_GPA1(_nr) (S5PV210_GPIO_A1_START + (_nr))
-#define S5PV210_GPB(_nr) (S5PV210_GPIO_B_START + (_nr))
-#define S5PV210_GPC0(_nr) (S5PV210_GPIO_C0_START + (_nr))
-#define S5PV210_GPC1(_nr) (S5PV210_GPIO_C1_START + (_nr))
-#define S5PV210_GPD0(_nr) (S5PV210_GPIO_D0_START + (_nr))
-#define S5PV210_GPD1(_nr) (S5PV210_GPIO_D1_START + (_nr))
-#define S5PV210_GPE0(_nr) (S5PV210_GPIO_E0_START + (_nr))
-#define S5PV210_GPE1(_nr) (S5PV210_GPIO_E1_START + (_nr))
-#define S5PV210_GPF0(_nr) (S5PV210_GPIO_F0_START + (_nr))
-#define S5PV210_GPF1(_nr) (S5PV210_GPIO_F1_START + (_nr))
-#define S5PV210_GPF2(_nr) (S5PV210_GPIO_F2_START + (_nr))
-#define S5PV210_GPF3(_nr) (S5PV210_GPIO_F3_START + (_nr))
-#define S5PV210_GPG0(_nr) (S5PV210_GPIO_G0_START + (_nr))
-#define S5PV210_GPG1(_nr) (S5PV210_GPIO_G1_START + (_nr))
-#define S5PV210_GPG2(_nr) (S5PV210_GPIO_G2_START + (_nr))
-#define S5PV210_GPG3(_nr) (S5PV210_GPIO_G3_START + (_nr))
-#define S5PV210_GPH0(_nr) (S5PV210_GPIO_H0_START + (_nr))
-#define S5PV210_GPH1(_nr) (S5PV210_GPIO_H1_START + (_nr))
-#define S5PV210_GPH2(_nr) (S5PV210_GPIO_H2_START + (_nr))
-#define S5PV210_GPH3(_nr) (S5PV210_GPIO_H3_START + (_nr))
-#define S5PV210_GPI(_nr) (S5PV210_GPIO_I_START + (_nr))
-#define S5PV210_GPJ0(_nr) (S5PV210_GPIO_J0_START + (_nr))
-#define S5PV210_GPJ1(_nr) (S5PV210_GPIO_J1_START + (_nr))
-#define S5PV210_GPJ2(_nr) (S5PV210_GPIO_J2_START + (_nr))
-#define S5PV210_GPJ3(_nr) (S5PV210_GPIO_J3_START + (_nr))
-#define S5PV210_GPJ4(_nr) (S5PV210_GPIO_J4_START + (_nr))
-#define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr))
-#define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr))
-#define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr))
-#define S5PV210_MP04(_nr) (S5PV210_GPIO_MP04_START + (_nr))
-#define S5PV210_MP05(_nr) (S5PV210_GPIO_MP05_START + (_nr))
-
-/* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1)
-#define S3C_GPIO_END S5PV210_GPIO_END
-
-/* define the number of gpios we need to the one after the MP05() range */
-#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \
- CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/hardware.h b/arch/arm/mach-s5pv210/include/mach/hardware.h
deleted file mode 100644
index fada7a392d09..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/hardware.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
deleted file mode 100644
index 5e0de3a31f3d..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/irqs.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0: System, DMA, Timer */
-
-#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
-#define IRQ_BATF S5P_IRQ_VIC0(17)
-#define IRQ_MDMA S5P_IRQ_VIC0(18)
-#define IRQ_PDMA0 S5P_IRQ_VIC0(19)
-#define IRQ_PDMA1 S5P_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
-#define IRQ_WDT S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
-#define IRQ_FIMC3 S5P_IRQ_VIC0(31)
-
-/* VIC1: ARM, Power, Memory, Connectivity, Storage */
-
-#define IRQ_PMU S5P_IRQ_VIC1(0)
-#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
-#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
-#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
-#define IRQ_CORTEX4 S5P_IRQ_VIC1(4)
-#define IRQ_IEMAPC S5P_IRQ_VIC1(5)
-#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
-#define IRQ_ONENAND S5P_IRQ_VIC1(7)
-#define IRQ_NFC S5P_IRQ_VIC1(8)
-#define IRQ_CFCON S5P_IRQ_VIC1(9)
-#define IRQ_UART0 S5P_IRQ_VIC1(10)
-#define IRQ_UART1 S5P_IRQ_VIC1(11)
-#define IRQ_UART2 S5P_IRQ_VIC1(12)
-#define IRQ_UART3 S5P_IRQ_VIC1(13)
-#define IRQ_IIC S5P_IRQ_VIC1(14)
-#define IRQ_SPI0 S5P_IRQ_VIC1(15)
-#define IRQ_SPI1 S5P_IRQ_VIC1(16)
-#define IRQ_SPI2 S5P_IRQ_VIC1(17)
-#define IRQ_IRDA S5P_IRQ_VIC1(18)
-#define IRQ_IIC2 S5P_IRQ_VIC1(19)
-#define IRQ_IIC_HDMIPHY S5P_IRQ_VIC1(20)
-#define IRQ_HSIRX S5P_IRQ_VIC1(21)
-#define IRQ_HSITX S5P_IRQ_VIC1(22)
-#define IRQ_UHOST S5P_IRQ_VIC1(23)
-#define IRQ_OTG S5P_IRQ_VIC1(24)
-#define IRQ_MSM S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
-#define IRQ_MIPI_CSIS S5P_IRQ_VIC1(29)
-#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
-#define IRQ_ONENAND_AUDI S5P_IRQ_VIC1(31)
-
-/* VIC2: Multimedia, Audio, Security */
-
-#define IRQ_LCD0 S5P_IRQ_VIC2(0)
-#define IRQ_LCD1 S5P_IRQ_VIC2(1)
-#define IRQ_LCD2 S5P_IRQ_VIC2(2)
-#define IRQ_LCD3 S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
-#define IRQ_JPEG S5P_IRQ_VIC2(8)
-#define IRQ_2D S5P_IRQ_VIC2(9)
-#define IRQ_3D S5P_IRQ_VIC2(10)
-#define IRQ_MIXER S5P_IRQ_VIC2(11)
-#define IRQ_HDMI S5P_IRQ_VIC2(12)
-#define IRQ_IIC1 S5P_IRQ_VIC2(13)
-#define IRQ_MFC S5P_IRQ_VIC2(14)
-#define IRQ_SDO S5P_IRQ_VIC2(15)
-#define IRQ_I2S0 S5P_IRQ_VIC2(16)
-#define IRQ_I2S1 S5P_IRQ_VIC2(17)
-#define IRQ_I2S2 S5P_IRQ_VIC2(18)
-#define IRQ_AC97 S5P_IRQ_VIC2(19)
-#define IRQ_PCM0 S5P_IRQ_VIC2(20)
-#define IRQ_PCM1 S5P_IRQ_VIC2(21)
-#define IRQ_SPDIF S5P_IRQ_VIC2(22)
-#define IRQ_ADC S5P_IRQ_VIC2(23)
-#define IRQ_PENDN S5P_IRQ_VIC2(24)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
-#define IRQ_CG S5P_IRQ_VIC2(26)
-#define IRQ_SSS_INT S5P_IRQ_VIC2(27)
-#define IRQ_SSS_HASH S5P_IRQ_VIC2(28)
-#define IRQ_PCM2 S5P_IRQ_VIC2(29)
-#define IRQ_SDMIRQ S5P_IRQ_VIC2(30)
-#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
-
-/* VIC3: Etc */
-
-#define IRQ_IPC S5P_IRQ_VIC3(0)
-#define IRQ_HOSTIF S5P_IRQ_VIC3(1)
-#define IRQ_HSMMC3 S5P_IRQ_VIC3(2)
-#define IRQ_CEC S5P_IRQ_VIC3(3)
-#define IRQ_TSI S5P_IRQ_VIC3(4)
-#define IRQ_MDNIE0 S5P_IRQ_VIC3(5)
-#define IRQ_MDNIE1 S5P_IRQ_VIC3(6)
-#define IRQ_MDNIE2 S5P_IRQ_VIC3(7)
-#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)
-#define IRQ_VIC_END S5P_IRQ_VIC3(31)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
-
-/* GPIO interrupt */
-#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1)
-#define S5P_GPIOINT_GROUP_MAXNR 22
-
-/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
-
-/* Compatibility */
-#define IRQ_LCD_FIFO IRQ_LCD0
-#define IRQ_LCD_VSYNC IRQ_LCD1
-#define IRQ_LCD_SYSTEM IRQ_LCD2
-#define IRQ_MIPI_CSIS0 IRQ_MIPI_CSIS
-
-#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
deleted file mode 100644
index 763929aca52d..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/map.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5PV210_PA_SDRAM 0x20000000
-
-#define S5PV210_PA_SROM_BANK5 0xA8000000
-
-#define S5PC110_PA_ONENAND 0xB0000000
-#define S5PC110_PA_ONENAND_DMA 0xB0600000
-
-#define S5PV210_PA_CHIPID 0xE0000000
-
-#define S5PV210_PA_SYSCON 0xE0100000
-
-#define S5PV210_PA_GPIO 0xE0200000
-
-#define S5PV210_PA_SPDIF 0xE1100000
-
-#define S5PV210_PA_SPI0 0xE1300000
-#define S5PV210_PA_SPI1 0xE1400000
-
-#define S5PV210_PA_KEYPAD 0xE1600000
-
-#define S5PV210_PA_ADC 0xE1700000
-
-#define S5PV210_PA_IIC0 0xE1800000
-#define S5PV210_PA_IIC1 0xFAB00000
-#define S5PV210_PA_IIC2 0xE1A00000
-
-#define S5PV210_PA_AC97 0xE2200000
-
-#define S5PV210_PA_PCM0 0xE2300000
-#define S5PV210_PA_PCM1 0xE1200000
-#define S5PV210_PA_PCM2 0xE2B00000
-
-#define S5PV210_PA_TIMER 0xE2500000
-#define S5PV210_PA_SYSTIMER 0xE2600000
-#define S5PV210_PA_WATCHDOG 0xE2700000
-#define S5PV210_PA_RTC 0xE2800000
-
-#define S5PV210_PA_UART 0xE2900000
-
-#define S5PV210_PA_SROMC 0xE8000000
-
-#define S5PV210_PA_CFCON 0xE8200000
-
-#define S5PV210_PA_MFC 0xF1700000
-
-#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
-
-#define S5PV210_PA_HSOTG 0xEC000000
-#define S5PV210_PA_HSPHY 0xEC100000
-
-#define S5PV210_PA_IIS0 0xEEE30000
-#define S5PV210_PA_IIS1 0xE2100000
-#define S5PV210_PA_IIS2 0xE2A00000
-
-#define S5PV210_PA_DMC0 0xF0000000
-#define S5PV210_PA_DMC1 0xF1400000
-
-#define S5PV210_PA_VIC0 0xF2000000
-#define S5PV210_PA_VIC1 0xF2100000
-#define S5PV210_PA_VIC2 0xF2200000
-#define S5PV210_PA_VIC3 0xF2300000
-
-#define S5PV210_PA_FB 0xF8000000
-
-#define S5PV210_PA_MDMA 0xFA200000
-#define S5PV210_PA_PDMA0 0xE0900000
-#define S5PV210_PA_PDMA1 0xE0A00000
-
-#define S5PV210_PA_MIPI_CSIS 0xFA600000
-
-#define S5PV210_PA_FIMC0 0xFB200000
-#define S5PV210_PA_FIMC1 0xFB300000
-#define S5PV210_PA_FIMC2 0xFB400000
-
-#define S5PV210_PA_JPEG 0xFB600000
-
-#define S5PV210_PA_SDO 0xF9000000
-#define S5PV210_PA_VP 0xF9100000
-#define S5PV210_PA_MIXER 0xF9200000
-#define S5PV210_PA_HDMI 0xFA100000
-#define S5PV210_PA_IIC_HDMIPHY 0xFA900000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_FB S5PV210_PA_FB
-#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
-#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3)
-#define S3C_PA_IIC S5PV210_PA_IIC0
-#define S3C_PA_IIC1 S5PV210_PA_IIC1
-#define S3C_PA_IIC2 S5PV210_PA_IIC2
-#define S3C_PA_RTC S5PV210_PA_RTC
-#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
-#define S3C_PA_WDT S5PV210_PA_WATCHDOG
-#define S3C_PA_SPI0 S5PV210_PA_SPI0
-#define S3C_PA_SPI1 S5PV210_PA_SPI1
-
-#define S5P_PA_CHIPID S5PV210_PA_CHIPID
-#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
-#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
-#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
-#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
-#define S5P_PA_MFC S5PV210_PA_MFC
-#define S5P_PA_IIC_HDMIPHY S5PV210_PA_IIC_HDMIPHY
-
-#define S5P_PA_SDO S5PV210_PA_SDO
-#define S5P_PA_VP S5PV210_PA_VP
-#define S5P_PA_MIXER S5PV210_PA_MIXER
-#define S5P_PA_HDMI S5PV210_PA_HDMI
-
-#define S5P_PA_ONENAND S5PC110_PA_ONENAND
-#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
-#define S5P_PA_SDRAM S5PV210_PA_SDRAM
-#define S5P_PA_SROMC S5PV210_PA_SROMC
-#define S5P_PA_SYSCON S5PV210_PA_SYSCON
-#define S5P_PA_TIMER S5PV210_PA_TIMER
-
-#define S5P_PA_JPEG S5PV210_PA_JPEG
-
-#define SAMSUNG_PA_ADC S5PV210_PA_ADC
-#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
-#define SAMSUNG_PA_TIMER S5PV210_PA_TIMER
-
-/* UART */
-
-#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-
-#define S3C_PA_UART S5PV210_PA_UART
-
-#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-
-#define S5P_SZ_UART SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
deleted file mode 100644
index 2d3cfa221d5f..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/memory.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-
-/*
- * Sparsemem support
- * Physical memory can be located from 0x20000000 to 0x7fffffff,
- * so MAX_PHYSMEM_BITS is 31.
- */
-
-#define MAX_PHYSMEM_BITS 31
-#define SECTION_SIZE_BITS 28
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h
deleted file mode 100644
index eba8aea63ed8..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/pm-core.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-static inline void s3c_pm_debug_init_uart(void)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
- __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
- __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_restored_gpios(void) { }
-static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index e345584d4c34..b14ffcd7f6cc 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -13,7 +13,7 @@
#ifndef __ASM_ARCH_REGS_CLOCK_H
#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-#include <mach/map.h>
+#include <plat/map-base.h>
#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
deleted file mode 100644
index de0c89976078..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5PV210 - GPIO (including EINT) register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-#define S5PV210_EINT30CON (S5P_VA_GPIO + 0xE00)
-#define S5P_EINT_CON(x) (S5PV210_EINT30CON + ((x) * 0x4))
-
-#define S5PV210_EINT30FLTCON0 (S5P_VA_GPIO + 0xE80)
-#define S5P_EINT_FLTCON(x) (S5PV210_EINT30FLTCON0 + ((x) * 0x4))
-
-#define S5PV210_EINT30MASK (S5P_VA_GPIO + 0xF00)
-#define S5P_EINT_MASK(x) (S5PV210_EINT30MASK + ((x) * 0x4))
-
-#define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40)
-#define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4))
-
-#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE S3C_GPIO_SFN(0xf)
-
-#define EINT_GPIO_0(x) S5PV210_GPH0(x)
-#define EINT_GPIO_1(x) S5PV210_GPH1(x)
-#define EINT_GPIO_2(x) S5PV210_GPH2(x)
-#define EINT_GPIO_3(x) S5PV210_GPH3(x)
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
deleted file mode 100644
index d8bc1e6c7aaa..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/regs-irq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/regs-irq.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
deleted file mode 100644
index 3658416134ec..000000000000
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- /*
- * FIXME: Used only by legacy code that is not used anymore,
- * but still compiled in, until all dependencies are removed.
- */
-}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index f8185b542218..1091b0a3729a 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -6,29 +6,16 @@
config PLAT_SAMSUNG
bool
- depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS
+ depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_EXYNOS || ARCH_S5PV210
default y
select GENERIC_IRQ_CHIP
select NO_IOPORT_MAP
help
Base platform code for all Samsung SoC based systems
-config PLAT_S5P
- bool
- depends on ARCH_S5PV210
- default y
- select ARCH_REQUIRE_GPIOLIB
- select ARM_VIC
- select NO_IOPORT_MAP
- select PLAT_SAMSUNG
- select S3C_GPIO_TRACK
- select S5P_GPIO_DRVSTR
- help
- Base platform code for Samsung's S5P series SoC.
-
config SAMSUNG_PM
bool
- depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || S5P_PM)
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
default y
help
Base platform power management code for samsung code
@@ -64,31 +51,6 @@ config SAMSUNG_ATAGS
if SAMSUNG_ATAGS
-# options for IRQ support
-
-config S5P_IRQ
- def_bool ARCH_S5PV210
- help
- Support common interrupt part for ARCH_S5P SoCs
-
-config S5P_EXT_INT
- bool
- help
- Use the external interrupts (other than GPIO interrupts.)
-
-config S5P_GPIO_INT
- bool
- help
- Common code for the GPIO interrupts (other than external interrupts.)
-
-# options for gpio configuration support
-
-config S5P_GPIO_DRVSTR
- bool
- help
- Internal configuration to get and set correct GPIO driver strength
- helper
-
config SAMSUNG_GPIO_EXTRA
int "Number of additional GPIO pins"
default 128 if SAMSUNG_GPIO_EXTRA128
@@ -120,12 +82,6 @@ config S3C_GPIO_TRACK
Internal configuration option to enable the s3c specific gpio
chip tracking if the platform requires it.
-# uart options
-
-config S5P_DEV_UART
- def_bool y
- depends on ARCH_S5PV210
-
# ADC driver
config S3C_ADC
@@ -283,66 +239,6 @@ config SAMSUNG_DEV_BACKLIGHT
help
Compile in platform device definition LCD backlight with PWM Timer
-config S5P_DEV_CSIS0
- bool
- help
- Compile in platform device definitions for MIPI-CSIS channel 0
-
-config S5P_DEV_CSIS1
- bool
- help
- Compile in platform device definitions for MIPI-CSIS channel 1
-
-config S5P_DEV_FIMC0
- bool
- help
- Compile in platform device definitions for FIMC controller 0
-
-config S5P_DEV_FIMC1
- bool
- help
- Compile in platform device definitions for FIMC controller 1
-
-config S5P_DEV_FIMC2
- bool
- help
- Compile in platform device definitions for FIMC controller 2
-
-config S5P_DEV_FIMC3
- bool
- help
- Compile in platform device definitions for FIMC controller 3
-
-config S5P_DEV_FIMD0
- bool
- help
- Compile in platform device definitions for FIMD controller 0
-
-config S5P_DEV_G2D
- bool
- help
- Compile in platform device definitions for G2D device
-
-config S5P_DEV_I2C_HDMIPHY
- bool
- help
- Compile in platform device definitions for I2C HDMIPHY controller
-
-config S5P_DEV_JPEG
- bool
- help
- Compile in platform device definitions for JPEG codec
-
-config S5P_DEV_ONENAND
- bool
- help
- Compile in platform device definition for OneNAND controller
-
-config S5P_DEV_TV
- bool
- help
- Compile in platform device definition for TV interface
-
config S3C24XX_PWM
bool "PWM device support"
select PWM
@@ -363,12 +259,6 @@ config S3C_DMA
help
Internal configuration for S3C DMA core
-config S5P_IRQ_PM
- bool
- default y if S5P_PM
- help
- Legacy IRQ power management for S5P platforms
-
config SAMSUNG_PM_GPIO
bool
default y if GPIO_SAMSUNG && PM
@@ -451,17 +341,6 @@ config SAMSUNG_WDT_RESET
Compile support for system restart by triggering watchdog reset.
Used on SoCs that do not provide dedicated reset control.
-config S5P_PM
- bool
- help
- Common code for power management support on S5P and newer SoCs
-
-config S5P_SLEEP
- bool
- help
- Internal config node to apply common S5P sleep management code.
- Can be selected by S5P and newer SoCs with similar sleep procedure.
-
config DEBUG_S3C_UART
depends on PLAT_SAMSUNG
int
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 97fc15ecc4ae..5fe175017f07 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -15,10 +15,6 @@ obj- :=
obj-y += init.o cpu.o
-obj-$(CONFIG_S5P_IRQ) += s5p-irq.o
-obj-$(CONFIG_S5P_EXT_INT) += s5p-irq-eint.o
-obj-$(CONFIG_S5P_GPIO_INT) += s5p-irq-gpioint.o
-
# ADC
obj-$(CONFIG_S3C_ADC) += adc.o
@@ -30,7 +26,6 @@ obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o
obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o
obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o
obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
-obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o
obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o
@@ -52,7 +47,3 @@ obj-$(CONFIG_SAMSUNG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
obj-$(CONFIG_SAMSUNG_WDT_RESET) += watchdog-reset.o
-
-obj-$(CONFIG_S5P_PM) += s5p-pm.o
-obj-$(CONFIG_S5P_IRQ_PM) += s5p-irq-pm.o
-obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
index 945fc3f5b7a2..360618ee39e5 100644
--- a/arch/arm/plat-samsung/cpu.c
+++ b/arch/arm/plat-samsung/cpu.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/io.h>
-
#include <plat/map-base.h>
#include <plat/cpu.h>
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index ead4f1c94058..83c7d154bde0 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -53,7 +53,6 @@
#include <linux/platform_data/ata-samsung_cf.h>
#include <plat/fb.h>
#include <plat/fb-s3c2410.h>
-#include <plat/hdmi.h>
#include <linux/platform_data/hwmon-s3c.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
@@ -145,23 +144,6 @@ struct platform_device s3c_device_camif = {
};
#endif /* CONFIG_CPU_S3C2440 */
-/* ASOC DMA */
-
-#ifdef CONFIG_PLAT_S5P
-static struct resource samsung_asoc_idma_resource = DEFINE_RES_IRQ(IRQ_I2S0);
-
-struct platform_device samsung_asoc_idma = {
- .name = "samsung-idma",
- .id = -1,
- .num_resources = 1,
- .resource = &samsung_asoc_idma_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif
-
/* FB */
#ifdef CONFIG_S3C_DEV_FB
@@ -190,151 +172,6 @@ void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
}
#endif /* CONFIG_S3C_DEV_FB */
-/* FIMC */
-
-#ifdef CONFIG_S5P_DEV_FIMC0
-static struct resource s5p_fimc0_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_FIMC0, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_FIMC0),
-};
-
-struct platform_device s5p_device_fimc0 = {
- .name = "s5p-fimc",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p_fimc0_resource),
- .resource = s5p_fimc0_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-struct platform_device s5p_device_fimc_md = {
- .name = "s5p-fimc-md",
- .id = -1,
-};
-#endif /* CONFIG_S5P_DEV_FIMC0 */
-
-#ifdef CONFIG_S5P_DEV_FIMC1
-static struct resource s5p_fimc1_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_FIMC1, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_FIMC1),
-};
-
-struct platform_device s5p_device_fimc1 = {
- .name = "s5p-fimc",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p_fimc1_resource),
- .resource = s5p_fimc1_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-#endif /* CONFIG_S5P_DEV_FIMC1 */
-
-#ifdef CONFIG_S5P_DEV_FIMC2
-static struct resource s5p_fimc2_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_FIMC2, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_FIMC2),
-};
-
-struct platform_device s5p_device_fimc2 = {
- .name = "s5p-fimc",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5p_fimc2_resource),
- .resource = s5p_fimc2_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-#endif /* CONFIG_S5P_DEV_FIMC2 */
-
-#ifdef CONFIG_S5P_DEV_FIMC3
-static struct resource s5p_fimc3_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_FIMC3, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_FIMC3),
-};
-
-struct platform_device s5p_device_fimc3 = {
- .name = "s5p-fimc",
- .id = 3,
- .num_resources = ARRAY_SIZE(s5p_fimc3_resource),
- .resource = s5p_fimc3_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-#endif /* CONFIG_S5P_DEV_FIMC3 */
-
-/* G2D */
-
-#ifdef CONFIG_S5P_DEV_G2D
-static struct resource s5p_g2d_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_G2D, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_2D),
-};
-
-struct platform_device s5p_device_g2d = {
- .name = "s5p-g2d",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p_g2d_resource),
- .resource = s5p_g2d_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-#endif /* CONFIG_S5P_DEV_G2D */
-
-#ifdef CONFIG_S5P_DEV_JPEG
-static struct resource s5p_jpeg_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_JPEG, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_JPEG),
-};
-
-struct platform_device s5p_device_jpeg = {
- .name = "s5p-jpeg",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p_jpeg_resource),
- .resource = s5p_jpeg_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-#endif /* CONFIG_S5P_DEV_JPEG */
-
-/* FIMD0 */
-
-#ifdef CONFIG_S5P_DEV_FIMD0
-static struct resource s5p_fimd0_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K),
- [1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"),
- [2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"),
- [3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"),
-};
-
-struct platform_device s5p_device_fimd0 = {
- .name = "s5p-fb",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p_fimd0_resource),
- .resource = s5p_fimd0_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd)
-{
- s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
- &s5p_device_fimd0);
-}
-#endif /* CONFIG_S5P_DEV_FIMD0 */
-
/* HWMON */
#ifdef CONFIG_S3C_DEV_HWMON
@@ -722,60 +559,6 @@ void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
}
#endif /* CONFIG_S3C_DEV_I2C7 */
-/* I2C HDMIPHY */
-
-#ifdef CONFIG_S5P_DEV_I2C_HDMIPHY
-static struct resource s5p_i2c_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_IIC_HDMIPHY, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC_HDMIPHY),
-};
-
-struct platform_device s5p_device_i2c_hdmiphy = {
- .name = "s3c2440-hdmiphy-i2c",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_i2c_resource),
- .resource = s5p_i2c_resource,
-};
-
-void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
-
- if (soc_is_s5pv210())
- pd->bus_num = 3;
- else
- pd->bus_num = 0;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s5p_device_i2c_hdmiphy);
-}
-
-static struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
-
-void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
- struct i2c_board_info *mhl_info, int mhl_bus)
-{
- struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
-
- if (soc_is_s5pv210())
- pd->hdmiphy_bus = 3;
- else
- pd->hdmiphy_bus = 0;
-
- pd->hdmiphy_info = hdmiphy_info;
- pd->mhl_info = mhl_info;
- pd->mhl_bus = mhl_bus;
-
- s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
- &s5p_device_hdmi);
-}
-
-#endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
-
/* I2S */
#ifdef CONFIG_PLAT_S3C24XX
@@ -879,36 +662,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
}
#endif /* CONFIG_PLAT_S3C24XX */
-/* MIPI CSIS */
-
-#ifdef CONFIG_S5P_DEV_CSIS0
-static struct resource s5p_mipi_csis0_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_16K),
- [1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0),
-};
-
-struct platform_device s5p_device_mipi_csis0 = {
- .name = "s5p-mipi-csis",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p_mipi_csis0_resource),
- .resource = s5p_mipi_csis0_resource,
-};
-#endif /* CONFIG_S5P_DEV_CSIS0 */
-
-#ifdef CONFIG_S5P_DEV_CSIS1
-static struct resource s5p_mipi_csis1_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_16K),
- [1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1),
-};
-
-struct platform_device s5p_device_mipi_csis1 = {
- .name = "s5p-mipi-csis",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p_mipi_csis1_resource),
- .resource = s5p_mipi_csis1_resource,
-};
-#endif
-
/* NAND */
#ifdef CONFIG_S3C_DEV_NAND
@@ -1052,43 +805,6 @@ void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
}
#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
-#ifdef CONFIG_S5P_DEV_ONENAND
-static struct resource s5p_onenand_resources[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_ONENAND, SZ_128K),
- [1] = DEFINE_RES_MEM(S5P_PA_ONENAND_DMA, SZ_8K),
- [2] = DEFINE_RES_IRQ(IRQ_ONENAND_AUDI),
-};
-
-struct platform_device s5p_device_onenand = {
- .name = "s5pc110-onenand",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_onenand_resources),
- .resource = s5p_onenand_resources,
-};
-#endif /* CONFIG_S5P_DEV_ONENAND */
-
-/* PMU */
-
-#if defined(CONFIG_PLAT_S5P) && !defined(CONFIG_ARCH_EXYNOS)
-static struct resource s5p_pmu_resource[] = {
- DEFINE_RES_IRQ(IRQ_PMU)
-};
-
-static struct platform_device s5p_device_pmu = {
- .name = "arm-pmu",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_pmu_resource),
- .resource = s5p_pmu_resource,
-};
-
-static int __init s5p_pmu_init(void)
-{
- platform_device_register(&s5p_device_pmu);
- return 0;
-}
-arch_initcall(s5p_pmu_init);
-#endif /* CONFIG_PLAT_S5P */
-
/* PWM Timer */
#ifdef CONFIG_SAMSUNG_DEV_PWM
@@ -1251,52 +967,6 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
}
#endif /* CONFIG_SAMSUNG_DEV_TS */
-/* TV */
-
-#ifdef CONFIG_S5P_DEV_TV
-
-static struct resource s5p_hdmi_resources[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_HDMI, SZ_1M),
- [1] = DEFINE_RES_IRQ(IRQ_HDMI),
-};
-
-struct platform_device s5p_device_hdmi = {
- .name = "s5p-hdmi",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_hdmi_resources),
- .resource = s5p_hdmi_resources,
-};
-
-static struct resource s5p_sdo_resources[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_SDO, SZ_64K),
- [1] = DEFINE_RES_IRQ(IRQ_SDO),
-};
-
-struct platform_device s5p_device_sdo = {
- .name = "s5p-sdo",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_sdo_resources),
- .resource = s5p_sdo_resources,
-};
-
-static struct resource s5p_mixer_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(S5P_PA_MIXER, SZ_64K, "mxr"),
- [1] = DEFINE_RES_MEM_NAMED(S5P_PA_VP, SZ_64K, "vp"),
- [2] = DEFINE_RES_IRQ_NAMED(IRQ_MIXER, "irq"),
-};
-
-struct platform_device s5p_device_mixer = {
- .name = "s5p-mixer",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_mixer_resources),
- .resource = s5p_mixer_resources,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_S5P_DEV_TV */
-
/* USB */
#ifdef CONFIG_S3C_DEV_USB_HOST
diff --git a/arch/arm/plat-samsung/include/plat/camport.h b/arch/arm/plat-samsung/include/plat/camport.h
deleted file mode 100644
index a5708bf84b3a..000000000000
--- a/arch/arm/plat-samsung/include/plat/camport.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P series camera interface helper functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_CAMPORT_H_
-#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
-
-enum s5p_camport_id {
- S5P_CAMPORT_A,
- S5P_CAMPORT_B,
-};
-
-/*
- * The helper functions to configure GPIO for the camera parallel bus.
- * The camera port can be multiplexed with any FIMC entity, even multiple
- * FIMC entities are allowed to be attached to a single port simultaneously.
- * These functions are to be used in the board setup code.
- */
-int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
-
-#endif /* __PLAT_SAMSUNG_CAMPORT_H */
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 995e56eadc0f..61d14f3a0426 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -47,7 +47,6 @@ IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -76,12 +75,6 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
# define soc_is_s3c64xx() 0
#endif
-#if defined(CONFIG_CPU_S5PV210)
-# define soc_is_s5pv210() is_samsung_s5pv210()
-#else
-# define soc_is_s5pv210() 0
-#endif
-
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef KHZ
@@ -117,12 +110,9 @@ extern void s3c_init_cpu(unsigned long idcode,
/* core initialisation functions */
-extern void s5p_init_irq(u32 *vic, u32 num_vic);
-
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
extern void s3c64xx_init_cpu(void);
-extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
@@ -150,6 +140,4 @@ extern struct bus_type s3c2442_subsys;
extern struct bus_type s3c2443_subsys;
extern struct bus_type s3c6410_subsys;
-extern void (*s5pc1xx_idle)(void);
-
#endif
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 5f5a28d08c2e..e23fed311e5f 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -25,9 +25,6 @@ struct s3c24xx_uart_resources {
extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
-extern struct s3c24xx_uart_resources s5p_uart_resources[];
-extern struct s3c24xx_uart_resources exynos4_uart_resources[];
-extern struct s3c24xx_uart_resources exynos5_uart_resources[];
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
@@ -75,45 +72,6 @@ extern struct platform_device s3c_device_usb_hsotg;
extern struct platform_device s3c_device_usb_hsudc;
extern struct platform_device s3c_device_wdt;
-extern struct platform_device s5p_device_fimc0;
-extern struct platform_device s5p_device_fimc1;
-extern struct platform_device s5p_device_fimc2;
-extern struct platform_device s5p_device_fimc3;
-extern struct platform_device s5p_device_fimc_md;
-extern struct platform_device s5p_device_jpeg;
-extern struct platform_device s5p_device_g2d;
-extern struct platform_device s5p_device_fimd0;
-extern struct platform_device s5p_device_hdmi;
-extern struct platform_device s5p_device_i2c_hdmiphy;
-extern struct platform_device s5p_device_mfc;
-extern struct platform_device s5p_device_mfc_l;
-extern struct platform_device s5p_device_mfc_r;
-extern struct platform_device s5p_device_mipi_csis0;
-extern struct platform_device s5p_device_mipi_csis1;
-extern struct platform_device s5p_device_mixer;
-extern struct platform_device s5p_device_onenand;
-extern struct platform_device s5p_device_sdo;
-
-extern struct platform_device s5pv210_device_ac97;
-extern struct platform_device s5pv210_device_iis0;
-extern struct platform_device s5pv210_device_iis1;
-extern struct platform_device s5pv210_device_iis2;
-extern struct platform_device s5pv210_device_pcm0;
-extern struct platform_device s5pv210_device_pcm1;
-extern struct platform_device s5pv210_device_pcm2;
-extern struct platform_device s5pv210_device_spdif;
-
-extern struct platform_device exynos4_device_ac97;
-extern struct platform_device exynos4_device_ahci;
-extern struct platform_device exynos4_device_i2s0;
-extern struct platform_device exynos4_device_i2s1;
-extern struct platform_device exynos4_device_i2s2;
-extern struct platform_device exynos4_device_ohci;
-extern struct platform_device exynos4_device_pcm0;
-extern struct platform_device exynos4_device_pcm1;
-extern struct platform_device exynos4_device_pcm2;
-extern struct platform_device exynos4_device_spdif;
-
extern struct platform_device samsung_asoc_idma;
extern struct platform_device samsung_device_keypad;
extern struct platform_device samsung_device_pwm;
diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/plat-samsung/include/plat/fb-core.h
index 6abcbf139cee..bca383efcf6d 100644
--- a/arch/arm/plat-samsung/include/plat/fb-core.h
+++ b/arch/arm/plat-samsung/include/plat/fb-core.h
@@ -26,19 +26,4 @@ static inline void s3c_fb_setname(char *name)
#endif
}
-/* Re-define device name depending on support. */
-static inline void s5p_fb_setname(int id, char *name)
-{
- switch (id) {
-#ifdef CONFIG_S5P_DEV_FIMD0
- case 0:
- s5p_device_fimd0.name = name;
- break;
-#endif
- default:
- printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id);
- break;
- }
-}
-
#endif /* __ASM_PLAT_FB_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 5a0e26afb961..b89f8f208515 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -26,32 +26,10 @@
extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
/**
- * s5p_fimd0_set_platdata() - Setup the FB device with platform data.
- * @pd: The platform data to set. The data is copied from the passed structure
- * so the machine data can mark the data __initdata so that any unused
- * machines will end up dumping their data at runtime.
- */
-extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
-
-/**
* s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
*
* Initialise the GPIO for an 24bpp LCD display on the RGB interface.
*/
extern void s3c64xx_fb_gpio_setup_24bpp(void);
-/**
- * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pv210_fb_gpio_setup_24bpp(void);
-
-/**
- * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0.
- */
-extern void exynos4_fimd0_gpio_setup_24bpp(void);
-
#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h
deleted file mode 100644
index 1d6cb2b8b094..000000000000
--- a/arch/arm/plat-samsung/include/plat/fimc-core.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/fimc-core.h
- *
- * Copyright 2010 Samsung Electronics Co., Ltd.
- * Sylwester Nawrocki <s.nawrocki@samsung.com>
- *
- * Samsung camera interface driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_PLAT_FIMC_CORE_H
-#define __ASM_PLAT_FIMC_CORE_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name to differentiate the subsystem in various SoCs. */
-static inline void s3c_fimc_setname(int id, char *name)
-{
- switch (id) {
-#ifdef CONFIG_S5P_DEV_FIMC0
- case 0:
- s5p_device_fimc0.name = name;
- break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC1
- case 1:
- s5p_device_fimc1.name = name;
- break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC2
- case 2:
- s5p_device_fimc2.name = name;
- break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC3
- case 3:
- s5p_device_fimc3.name = name;
- break;
-#endif
- default:
- break;
- }
-}
-
-#endif /* __ASM_PLAT_FIMC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 08740eed050c..b5294eff18b5 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -27,7 +27,6 @@
#include <linux/types.h>
typedef unsigned int __bitwise__ samsung_gpio_pull_t;
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
/* forward declaration if gpio-core.h hasn't been included */
struct samsung_gpio_chip;
@@ -180,67 +179,4 @@ static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
}
-/* Define values for the drvstr available for each gpio pin.
- *
- * These values control the value of the output signal driver strength,
- * configurable on most pins on the S5P series.
- */
-#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x0)
-#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x2)
-#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x1)
-#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x3)
-
-/**
- * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the driver streght value for the specified pin.
-*/
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
-
-/**
- * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
- * @pin: The pin number to configure the driver streght value
- * @drvstr: The new value of the driver strength
- *
- * This function sets the driver strength value for the specified pin.
- * It will return 0 if successful, or a negative error code if the pin
- * cannot support the requested setting.
-*/
-extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
-
-/**
- * s5p_register_gpio_interrupt() - register interrupt support for a gpio group
- * @pin: The pin number from the group to be registered
- *
- * This function registers gpio interrupt support for the group that the
- * specified pin belongs to.
- *
- * The total number of gpio pins is quite large ob s5p series. Registering
- * irq support for all of them would be a resource waste. Because of that the
- * interrupt support for standard gpio pins is registered dynamically.
- *
- * It will return the irq number of the interrupt that has been registered
- * or -ENOMEM if no more gpio interrupts can be registered. It is allowed
- * to call this function more than once for the same gpio group (the group
- * will be registered only once).
- */
-extern int s5p_register_gpio_interrupt(int pin);
-
-/** s5p_register_gpioint_bank() - add gpio bank for further gpio interrupt
- * registration (see s5p_register_gpio_interrupt function)
- * @chain_irq: chained irq number for the gpio int handler for this bank
- * @start: start gpio group number of this bank
- * @nr_groups: number of gpio groups handled by this bank
- *
- * This functions registers initial information about gpio banks that
- * can be later used by the s5p_register_gpio_interrupt() function to
- * enable support for gpio interrupt for particular gpio group.
- */
-#ifdef CONFIG_S5P_GPIO_INT
-extern int s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups);
-#else
-#define s5p_register_gpioint_bank(chain_irq, start, nr_groups) do { } while (0)
-#endif
-
#endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h
deleted file mode 100644
index 331d046ac2c5..000000000000
--- a/arch/arm/plat-samsung/include/plat/hdmi.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2012 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_HDMI_H
-#define __PLAT_SAMSUNG_HDMI_H __FILE__
-
-extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
- struct i2c_board_info *mhl_info, int mhl_bus);
-
-#endif /* __PLAT_SAMSUNG_HDMI_H */
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
deleted file mode 100644
index 039001c0ef05..000000000000
--- a/arch/arm/plat-samsung/include/plat/irqs.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/irqs.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P Common IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_IRQS_H
-#define __PLAT_SAMSUNG_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S5P_IRQ_OFFSET (32)
-
-#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET)
-
-#define S5P_VIC0_BASE S5P_IRQ(0)
-#define S5P_VIC1_BASE S5P_IRQ(32)
-#define S5P_VIC2_BASE S5P_IRQ(64)
-#define S5P_VIC3_BASE S5P_IRQ(96)
-
-#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
-
-#define IRQ_VIC0_BASE S5P_VIC0_BASE
-#define IRQ_VIC1_BASE S5P_VIC1_BASE
-#define IRQ_VIC2_BASE S5P_VIC2_BASE
-
-/* VIC based IRQs */
-
-#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
-#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x))
-#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
-#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
-
-#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
- : ((x) - 16 + S5P_EINT_BASE2))
-
-#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \
- ((irq) - S5P_EINT_BASE1) : \
- ((irq) + 16 - S5P_EINT_BASE2))
-
-#define IRQ_EINT_BIT(x) EINT_OFFSET(x)
-
-/* Typically only a few gpio chips require gpio interrupt support.
- To avoid memory waste irq descriptors are allocated only for
- S5P_GPIOINT_GROUP_COUNT chips, each with total number of
- S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
- to any gpio chip with the s5p_register_gpio_interrupt() function */
-#define S5P_GPIOINT_GROUP_COUNT 4
-#define S5P_GPIOINT_GROUP_SIZE 8
-#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
-
-/* IRQ types common for all s5p platforms */
-#define S5P_IRQ_TYPE_LEVEL_LOW (0x00)
-#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01)
-#define S5P_IRQ_TYPE_EDGE_FALLING (0x02)
-#define S5P_IRQ_TYPE_EDGE_RISING (0x03)
-#define S5P_IRQ_TYPE_EDGE_BOTH (0x04)
-
-#endif /* __PLAT_SAMSUNG_IRQS_H */
diff --git a/arch/arm/plat-samsung/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h
deleted file mode 100644
index 033654e91e22..000000000000
--- a/arch/arm/plat-samsung/include/plat/mfc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_MFC_H
-#define __PLAT_SAMSUNG_MFC_H __FILE__
-
-struct s5p_mfc_dt_meminfo {
- unsigned long loff;
- unsigned long lsize;
- unsigned long roff;
- unsigned long rsize;
- char *compatible;
-};
-
-/**
- * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
- * @rbase: base address for MFC 'right' memory interface
- * @rsize: size of the memory reserved for MFC 'right' interface
- * @lbase: base address for MFC 'left' memory interface
- * @lsize: size of the memory reserved for MFC 'left' interface
- *
- * This function reserves system memory for both MFC device memory
- * interfaces and registers it to respective struct device entries as
- * coherent memory.
- */
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
- phys_addr_t lbase, unsigned int lsize);
-
-#endif /* __PLAT_SAMSUNG_MFC_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index f84b6cbc8745..2787553c3ae2 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -57,14 +57,6 @@ extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
/* S3C2416 SDHCI setup */
@@ -144,45 +136,6 @@ static inline void s3c6400_default_sdhci2(void) { }
#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
-/* S5PV210 SDHCI setup */
-
-#ifdef CONFIG_S5PV210_SETUP_SDHCI
-static inline void s5pv210_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci3(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC3
- s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5pv210_default_sdhci0(void) { }
-static inline void s5pv210_default_sdhci1(void) { }
-static inline void s5pv210_default_sdhci2(void) { }
-static inline void s5pv210_default_sdhci3(void) { }
-
-#endif /* CONFIG_S5PV210_SETUP_SDHCI */
-
static inline void s3c_sdhci_setname(int id, char *name)
{
switch (id) {
diff --git a/arch/arm/plat-samsung/include/plat/tv-core.h b/arch/arm/plat-samsung/include/plat/tv-core.h
deleted file mode 100644
index 3bc34f3ce28f..000000000000
--- a/arch/arm/plat-samsung/include/plat/tv-core.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/tv.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- * Tomasz Stanislawski <t.stanislaws@samsung.com>
- *
- * Samsung TV driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SAMSUNG_PLAT_TV_H
-#define __SAMSUNG_PLAT_TV_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name to differentiate the subsystem in various SoCs. */
-static inline void s5p_hdmi_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
- s5p_device_hdmi.name = name;
-#endif
-}
-
-static inline void s5p_mixer_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
- s5p_device_mixer.name = name;
-#endif
-}
-
-static inline void s5p_sdo_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
- s5p_device_sdo.name = name;
-#endif
-}
-
-#endif /* __SAMSUNG_PLAT_TV_H */
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index da268813901b..f6084f641e6f 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -196,7 +196,7 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = {
.resume = samsung_gpio_pm_2bit_resume,
};
-#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
+#if defined(CONFIG_ARCH_S3C64XX)
static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
{
chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
@@ -306,7 +306,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = {
.save = samsung_gpio_pm_4bit_save,
.resume = samsung_gpio_pm_4bit_resume,
};
-#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
+#endif /* CONFIG_ARCH_S3C64XX */
/**
* samsung_pm_save_gpio() - save gpio chip data for suspend
diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c
index 469b86260fe3..0b04b6b0fa30 100644
--- a/arch/arm/plat-samsung/s5p-dev-mfc.c
+++ b/arch/arm/plat-samsung/s5p-dev-mfc.c
@@ -17,56 +17,16 @@
#include <linux/of_fdt.h>
#include <linux/of.h>
-#include <plat/mfc.h>
-
-#ifdef CONFIG_SAMSUNG_ATAGS
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <plat/devs.h>
-
-static struct resource s5p_mfc_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
- [1] = DEFINE_RES_IRQ(IRQ_MFC),
-};
-
-struct platform_device s5p_device_mfc = {
- .name = "s5p-mfc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_mfc_resource),
- .resource = s5p_mfc_resource,
-};
-
-/*
- * MFC hardware has 2 memory interfaces which are modelled as two separate
- * platform devices to let dma-mapping distinguish between them.
- *
- * MFC parent device (s5p_device_mfc) must be registered before memory
- * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
- */
-
-struct platform_device s5p_device_mfc_l = {
- .name = "s5p-mfc-l",
- .id = -1,
- .dev = {
- .parent = &s5p_device_mfc.dev,
- .dma_mask = &s5p_device_mfc_l.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-struct platform_device s5p_device_mfc_r = {
- .name = "s5p-mfc-r",
- .id = -1,
- .dev = {
- .parent = &s5p_device_mfc.dev,
- .dma_mask = &s5p_device_mfc_r.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-#else
static struct platform_device s5p_device_mfc_l;
static struct platform_device s5p_device_mfc_r;
-#endif
+
+struct s5p_mfc_dt_meminfo {
+ unsigned long loff;
+ unsigned long lsize;
+ unsigned long roff;
+ unsigned long rsize;
+ char *compatible;
+};
struct s5p_mfc_reserved_mem {
phys_addr_t base;
@@ -77,7 +37,7 @@ struct s5p_mfc_reserved_mem {
static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
phys_addr_t lbase, unsigned int lsize)
{
int i;
@@ -100,28 +60,6 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
}
}
-#ifdef CONFIG_SAMSUNG_ATAGS
-static int __init s5p_mfc_memory_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
- struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
- if (!area->base)
- continue;
-
- if (dma_declare_coherent_memory(area->dev, area->base,
- area->base, area->size,
- DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
- printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
- area->size, (unsigned long) area->base);
- }
- return 0;
-}
-device_initcall(s5p_mfc_memory_init);
-#endif
-
-#ifdef CONFIG_OF
int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
int depth, void *data)
{
@@ -154,4 +92,3 @@ int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
return 1;
}
-#endif
diff --git a/arch/arm/plat-samsung/s5p-dev-uart.c b/arch/arm/plat-samsung/s5p-dev-uart.c
deleted file mode 100644
index 8c4487af98c8..000000000000
--- a/arch/arm/plat-samsung/s5p-dev-uart.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (c) 2009,2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Base S5P UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
- /* Serial port registrations */
-
-static struct resource s5p_uart0_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_UART0, S5P_SZ_UART),
- [1] = DEFINE_RES_IRQ(IRQ_UART0),
-};
-
-static struct resource s5p_uart1_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_UART1, S5P_SZ_UART),
- [1] = DEFINE_RES_IRQ(IRQ_UART1),
-};
-
-static struct resource s5p_uart2_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_UART2, S5P_SZ_UART),
- [1] = DEFINE_RES_IRQ(IRQ_UART2),
-};
-
-static struct resource s5p_uart3_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
- [0] = DEFINE_RES_MEM(S5P_PA_UART3, S5P_SZ_UART),
- [1] = DEFINE_RES_IRQ(IRQ_UART3),
-#endif
-};
-
-static struct resource s5p_uart4_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
- [0] = DEFINE_RES_MEM(S5P_PA_UART4, S5P_SZ_UART),
- [1] = DEFINE_RES_IRQ(IRQ_UART4),
-#endif
-};
-
-static struct resource s5p_uart5_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
- [0] = DEFINE_RES_MEM(S5P_PA_UART5, S5P_SZ_UART),
- [1] = DEFINE_RES_IRQ(IRQ_UART5),
-#endif
-};
-
-struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
- [0] = {
- .resources = s5p_uart0_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart0_resource),
- },
- [1] = {
- .resources = s5p_uart1_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart1_resource),
- },
- [2] = {
- .resources = s5p_uart2_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart2_resource),
- },
- [3] = {
- .resources = s5p_uart3_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart3_resource),
- },
- [4] = {
- .resources = s5p_uart4_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart4_resource),
- },
- [5] = {
- .resources = s5p_uart5_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart5_resource),
- },
-};
diff --git a/arch/arm/plat-samsung/s5p-irq-eint.c b/arch/arm/plat-samsung/s5p-irq-eint.c
deleted file mode 100644
index ebee4dc11a94..000000000000
--- a/arch/arm/plat-samsung/s5p-irq-eint.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/of.h>
-
-#include <plat/regs-irqtype.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-cfg.h>
-#include <mach/regs-gpio.h>
-
-static inline void s5p_irq_eint_mask(struct irq_data *data)
-{
- u32 mask;
-
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask |= eint_irq_to_bit(data->irq);
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_eint_unmask(struct irq_data *data)
-{
- u32 mask;
-
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask &= ~(eint_irq_to_bit(data->irq));
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-}
-
-static inline void s5p_irq_eint_ack(struct irq_data *data)
-{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_eint_maskack(struct irq_data *data)
-{
- /* compiler should in-line these */
- s5p_irq_eint_mask(data);
- s5p_irq_eint_ack(data);
-}
-
-static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = EINT_OFFSET(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S5P_IRQ_TYPE_EDGE_RISING;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs & 0x7) * 4;
- mask = 0x7 << shift;
-
- ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
- ctrl &= ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
-
- if ((0 <= offs) && (offs < 8))
- s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
-
- else if ((8 <= offs) && (offs < 16))
- s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
-
- else if ((16 <= offs) && (offs < 24))
- s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
-
- else if ((24 <= offs) && (offs < 32))
- s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
-
- else
- printk(KERN_ERR "No such irq number %d", offs);
-
- return 0;
-}
-
-static struct irq_chip s5p_irq_eint = {
- .name = "s5p-eint",
- .irq_mask = s5p_irq_eint_mask,
- .irq_unmask = s5p_irq_eint_unmask,
- .irq_mask_ack = s5p_irq_eint_maskack,
- .irq_ack = s5p_irq_eint_ack,
- .irq_set_type = s5p_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-/* s5p_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from EINTs 16 to 31. It is designed to be inlined into the specific
- * handler s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void s5p_irq_demux_eint(unsigned int start)
-{
- u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
- u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
- unsigned int irq;
-
- status &= ~mask;
- status &= 0xff;
-
- while (status) {
- irq = fls(status) - 1;
- generic_handle_irq(irq + start);
- status &= ~(1 << irq);
- }
-}
-
-static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- s5p_irq_demux_eint(IRQ_EINT(16));
- s5p_irq_demux_eint(IRQ_EINT(24));
-}
-
-static inline void s5p_irq_vic_eint_mask(struct irq_data *data)
-{
- void __iomem *base = irq_data_get_irq_chip_data(data);
-
- s5p_irq_eint_mask(data);
- writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s5p_irq_vic_eint_unmask(struct irq_data *data)
-{
- void __iomem *base = irq_data_get_irq_chip_data(data);
-
- s5p_irq_eint_unmask(data);
- writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE);
-}
-
-static inline void s5p_irq_vic_eint_ack(struct irq_data *data)
-{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_vic_eint_maskack(struct irq_data *data)
-{
- s5p_irq_vic_eint_mask(data);
- s5p_irq_vic_eint_ack(data);
-}
-
-static struct irq_chip s5p_irq_vic_eint = {
- .name = "s5p_vic_eint",
- .irq_mask = s5p_irq_vic_eint_mask,
- .irq_unmask = s5p_irq_vic_eint_unmask,
- .irq_mask_ack = s5p_irq_vic_eint_maskack,
- .irq_ack = s5p_irq_vic_eint_ack,
- .irq_set_type = s5p_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-static int __init s5p_init_irq_eint(void)
-{
- int irq;
-
- if (of_have_populated_dt())
- return -ENODEV;
-
- for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
- irq_set_chip(irq, &s5p_irq_vic_eint);
-
- for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
- irq_set_chip_and_handler(irq, &s5p_irq_eint, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- irq_set_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
- return 0;
-}
-
-arch_initcall(s5p_init_irq_eint);
diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c
deleted file mode 100644
index fafdb059043a..000000000000
--- a/arch/arm/plat-samsung/s5p-irq-gpioint.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * Author: Kyungmin Park <kyungmin.park@samsung.com>
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- * Author: Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-
-#include <mach/map.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-
-#define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u))
-
-#define CON_OFFSET 0x700
-#define MASK_OFFSET 0x900
-#define PEND_OFFSET 0xA00
-#define REG_OFFSET(x) ((x) << 2)
-
-struct s5p_gpioint_bank {
- struct list_head list;
- int start;
- int nr_groups;
- int irq;
- struct samsung_gpio_chip **chips;
- void (*handler)(unsigned int, struct irq_desc *);
-};
-
-static LIST_HEAD(banks);
-
-static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
-{
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- struct irq_chip_type *ct = gc->chip_types;
- unsigned int shift = (d->irq - gc->irq_base) << 2;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- type = S5P_IRQ_TYPE_EDGE_RISING;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- type = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- type = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- type = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- type = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
- case IRQ_TYPE_NONE:
- default:
- printk(KERN_WARNING "No irq type\n");
- return -EINVAL;
- }
-
- gc->type_cache &= ~(0x7 << shift);
- gc->type_cache |= type << shift;
- writel(gc->type_cache, gc->reg_base + ct->regs.type);
- return 0;
-}
-
-static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
- struct s5p_gpioint_bank *bank = irq_get_handler_data(irq);
- int group, pend_offset, mask_offset;
- unsigned int pend, mask;
-
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
-
- for (group = 0; group < bank->nr_groups; group++) {
- struct samsung_gpio_chip *chip = bank->chips[group];
- if (!chip)
- continue;
-
- pend_offset = REG_OFFSET(group);
- pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset);
- if (!pend)
- continue;
-
- mask_offset = REG_OFFSET(group);
- mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset);
- pend &= ~mask;
-
- while (pend) {
- int offset = fls(pend) - 1;
- int real_irq = chip->irq_base + offset;
- generic_handle_irq(real_irq);
- pend &= ~BIT(offset);
- }
- }
- chained_irq_exit(chip, desc);
-}
-
-static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
-{
- static int used_gpioint_groups = 0;
- int group = chip->group;
- struct s5p_gpioint_bank *b, *bank = NULL;
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
- return -ENOMEM;
-
- list_for_each_entry(b, &banks, list) {
- if (group >= b->start && group < b->start + b->nr_groups) {
- bank = b;
- break;
- }
- }
- if (!bank)
- return -EINVAL;
-
- if (!bank->handler) {
- bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
- bank->nr_groups, GFP_KERNEL);
- if (!bank->chips)
- return -ENOMEM;
-
- irq_set_chained_handler(bank->irq, s5p_gpioint_handler);
- irq_set_handler_data(bank->irq, bank);
- bank->handler = s5p_gpioint_handler;
- printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n",
- bank->irq);
- }
-
- /*
- * chained GPIO irq has been successfully registered, allocate new gpio
- * int group and assign irq nubmers
- */
- chip->irq_base = S5P_GPIOINT_BASE +
- used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
- used_gpioint_groups++;
-
- bank->chips[group - bank->start] = chip;
-
- gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
- GPIO_BASE(chip),
- handle_level_irq);
- if (!gc)
- return -ENOMEM;
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_set_type = s5p_gpioint_set_type,
- ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
- ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
- ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
- irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
- IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
- return 0;
-}
-
-int __init s5p_register_gpio_interrupt(int pin)
-{
- struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
- int offset, group;
- int ret;
-
- if (!my_chip)
- return -EINVAL;
-
- offset = pin - my_chip->chip.base;
- group = my_chip->group;
-
- /* check if the group has been already registered */
- if (my_chip->irq_base)
- goto success;
-
- /* register gpio group */
- ret = s5p_gpioint_add(my_chip);
- if (ret == 0) {
- my_chip->chip.to_irq = samsung_gpiolib_to_irq;
- printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
- group);
- goto success;
- }
- return ret;
-success:
- my_chip->bitmap_gpio_int |= BIT(offset);
-
- return my_chip->irq_base + offset;
-}
-
-int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups)
-{
- struct s5p_gpioint_bank *bank;
-
- bank = kzalloc(sizeof(*bank), GFP_KERNEL);
- if (!bank)
- return -ENOMEM;
-
- bank->start = start;
- bank->nr_groups = nr_groups;
- bank->irq = chain_irq;
-
- list_add_tail(&bank->list, &banks);
- return 0;
-}
diff --git a/arch/arm/plat-samsung/s5p-irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c
deleted file mode 100644
index 52b16943617e..000000000000
--- a/arch/arm/plat-samsung/s5p-irq-pm.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/plat-s3c24xx/irq-pm.c,
- * Copyright (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <plat/cpu.h>
-#include <plat/irqs.h>
-#include <plat/pm.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
- * as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow = 0x00000006L;
-unsigned long s3c_irqwake_eintallow = 0xffffffffL;
-
-int s3c_irq_wake(struct irq_data *data, unsigned int state)
-{
- unsigned long irqbit;
- unsigned int irq_rtc_tic, irq_rtc_alarm;
-
- irq_rtc_tic = IRQ_RTC_TIC;
- irq_rtc_alarm = IRQ_RTC_ALARM;
-
- if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
- irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
-
- if (!state)
- s3c_irqwake_intmask |= irqbit;
- else
- s3c_irqwake_intmask &= ~irqbit;
- } else {
- return -ENOENT;
- }
-
- return 0;
-}
-
-static struct sleep_save eint_save[] = {
- SAVE_ITEM(S5P_EINT_CON(0)),
- SAVE_ITEM(S5P_EINT_CON(1)),
- SAVE_ITEM(S5P_EINT_CON(2)),
- SAVE_ITEM(S5P_EINT_CON(3)),
-
- SAVE_ITEM(S5P_EINT_FLTCON(0)),
- SAVE_ITEM(S5P_EINT_FLTCON(1)),
- SAVE_ITEM(S5P_EINT_FLTCON(2)),
- SAVE_ITEM(S5P_EINT_FLTCON(3)),
- SAVE_ITEM(S5P_EINT_FLTCON(4)),
- SAVE_ITEM(S5P_EINT_FLTCON(5)),
- SAVE_ITEM(S5P_EINT_FLTCON(6)),
- SAVE_ITEM(S5P_EINT_FLTCON(7)),
-
- SAVE_ITEM(S5P_EINT_MASK(0)),
- SAVE_ITEM(S5P_EINT_MASK(1)),
- SAVE_ITEM(S5P_EINT_MASK(2)),
- SAVE_ITEM(S5P_EINT_MASK(3)),
-};
-
-int s3c24xx_irq_suspend(void)
-{
- s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
-
- return 0;
-}
-
-void s3c24xx_irq_resume(void)
-{
- s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
-}
-
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
deleted file mode 100644
index ddfaca9c79d8..000000000000
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-vic.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <plat/cpu.h>
-
-void __init s5p_init_irq(u32 *vic, u32 num_vic)
-{
-#ifdef CONFIG_ARM_VIC
- int irq;
-
- /* initialize the VICs */
- for (irq = 0; irq < num_vic; irq++)
- vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
-#endif
-}
diff --git a/arch/arm/plat-samsung/s5p-pm.c b/arch/arm/plat-samsung/s5p-pm.c
deleted file mode 100644
index 0747468f0936..000000000000
--- a/arch/arm/plat-samsung/s5p-pm.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P Power Manager (Suspend-To-RAM) support
- *
- * Based on arch/arm/plat-s3c24xx/pm.c
- * Copyright (c) 2004,2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/suspend.h>
-#include <plat/pm.h>
-
-#define PFX "s5p pm: "
-
-/* s3c_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-void s3c_pm_configure_extint(void)
-{
- /* nothing here yet */
-}
-
-void s3c_pm_restore_core(void)
-{
- /* nothing here yet */
-}
-
-void s3c_pm_save_core(void)
-{
- /* nothing here yet */
-}
-
diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S
deleted file mode 100644
index 25c68ceb9e2b..000000000000
--- a/arch/arm/plat-samsung/s5p-sleep.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common S5P Sleep Code
- * Based on S3C64XX sleep code by:
- * Ben Dooks, (c) 2008 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/linkage.h>
-
- .data
- .align
-
- /*
- * sleep magic, to allow the bootloader to check for an valid
- * image to resume to. Must be the first word before the
- * s3c_cpu_resume entry.
- */
-
- .word 0x2bedf00d
-
- /*
- * s3c_cpu_resume
- *
- * resume code entry for bootloader to call
- */
-
-ENTRY(s3c_cpu_resume)
- b cpu_resume
-ENDPROC(s3c_cpu_resume)