summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2023-10-26 08:17:26 -1000
committerLinus Torvalds <torvalds@linux-foundation.org>2023-10-26 08:17:26 -1000
commit3a568e3a961ba330091cd031647e4c303fa0badb (patch)
tree77be118beb7508eec87b6ac693a793bd4eb17bd0
parentc17cda15cc86e65e9725641daddcd7a63cc9ad01 (diff)
parent736a4aad8a9fdcf577ffa33b33df240c67557af8 (diff)
Merge tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann: "A couple of platforms have some last-minute fixes, in particular: - riscv gets some fixes for noncoherent DMA on the renesas and thead platforms and dts fix for SPI on the visionfive 2 board - Qualcomm Snapdragon gets three dts fixes to address board specific regressions on the pmic and gpio nodes - Rockchip platforms get multiple dts fixes to address issues on the recent rk3399 platform as well as the older rk3128 platform that apparently regressed a while ago. - TI OMAP gets some trivial code and dts fixes and a regression fix for the omap1 ams-delta modem - NXP i.MX firmware has one fix for a use-after-free but in its error handling" * tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT riscv: dts: thead: set dma-noncoherent to soc bus arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399 clk: ti: Fix missing omap5 mcbsp functional clock and aliases clk: ti: Fix missing omap4 mcbsp functional clock and aliases ARM: OMAP1: ams-delta: Fix MODEM initialization failure soc: renesas: Make ARCH_R9A07G043 depend on required options riscv: dts: starfive: visionfive 2: correct spi's ss pin firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels() ARM: OMAP: timer32K: fix all kernel-doc warnings ARM: omap2: fix a debug printk ARM: dts: rockchip: Fix timer clocks for RK3128 ARM: dts: rockchip: Add missing quirk for RK3128's dma engine ARM: dts: rockchip: Add missing arm timer interrupt for RK3128 ARM: dts: rockchip: Fix i2c0 register address for RK3128 arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou ...
-rw-r--r--MAINTAINERS5
-rw-r--r--arch/arm/boot/dts/rockchip/rk3128.dtsi18
-rw-r--r--arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi6
-rw-r--r--arch/arm/boot/dts/ti/omap/omap4-l4.dtsi2
-rw-r--r--arch/arm/boot/dts/ti/omap/omap5-l4-abe.dtsi6
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c60
-rw-r--r--arch/arm/mach-omap1/timer32k.c14
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c2
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c.dts32
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi32
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts18
-rw-r--r--arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi2
-rw-r--r--arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts10
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi1
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399.dtsi10
-rw-r--r--arch/riscv/Kconfig3
-rw-r--r--arch/riscv/Kconfig.errata1
-rw-r--r--arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi2
-rw-r--r--arch/riscv/boot/dts/thead/th1520.dtsi1
-rw-r--r--drivers/cache/Kconfig2
-rw-r--r--drivers/clk/ti/clk-44xx.c5
-rw-r--r--drivers/clk/ti/clk-54xx.c4
-rw-r--r--drivers/firmware/imx/imx-dsp.c2
-rw-r--r--drivers/soc/renesas/Kconfig10
24 files changed, 128 insertions, 120 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 668d1e24452d..8bc58b2b6d24 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13846,9 +13846,10 @@ F: Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
F: drivers/staging/media/meson/vdec/
METHODE UDPU SUPPORT
-M: Vladimir Vid <vladimir.vid@sartura.hr>
+M: Robert Marko <robert.marko@sartura.hr>
S: Maintained
-F: arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+F: arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
+F: arch/arm64/boot/dts/marvell/armada-3720-uDPU.*
MHI BUS
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index b63bd4ad3143..88a4b0d6d928 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -64,7 +64,8 @@
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
arm,cpu-registers-not-fw-configured;
clock-frequency = <24000000>;
};
@@ -233,7 +234,7 @@
compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
reg = <0x20044000 0x20>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
clock-names = "pclk", "timer";
};
@@ -241,7 +242,7 @@
compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
reg = <0x20044020 0x20>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER1>;
clock-names = "pclk", "timer";
};
@@ -249,7 +250,7 @@
compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
reg = <0x20044040 0x20>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER2>;
clock-names = "pclk", "timer";
};
@@ -257,7 +258,7 @@
compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
reg = <0x20044060 0x20>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER3>;
clock-names = "pclk", "timer";
};
@@ -265,7 +266,7 @@
compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
reg = <0x20044080 0x20>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER4>;
clock-names = "pclk", "timer";
};
@@ -273,7 +274,7 @@
compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
reg = <0x200440a0 0x20>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER5>;
clock-names = "pclk", "timer";
};
@@ -426,7 +427,7 @@
i2c0: i2c@20072000 {
compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
- reg = <20072000 0x1000>;
+ reg = <0x20072000 0x1000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C0>;
@@ -458,6 +459,7 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
clocks = <&cru ACLK_DMAC>;
clock-names = "apb_pclk";
#dma-cells = <1>;
diff --git a/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi b/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi
index 7ae8b620515c..59f546a278f8 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi
@@ -109,6 +109,8 @@
reg = <0x0 0xff>, /* MPU private access */
<0x49022000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 24>;
+ clock-names = "fck";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
@@ -142,6 +144,8 @@
reg = <0x0 0xff>, /* MPU private access */
<0x49024000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 24>;
+ clock-names = "fck";
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
@@ -175,6 +179,8 @@
reg = <0x0 0xff>, /* MPU private access */
<0x49026000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 24>;
+ clock-names = "fck";
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
diff --git a/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
index 46b8f9efd413..3fcef3080eae 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
@@ -2043,6 +2043,8 @@
compatible = "ti,omap4-mcbsp";
reg = <0x0 0xff>; /* L4 Interconnect */
reg-names = "mpu";
+ clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 24>;
+ clock-names = "fck";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
diff --git a/arch/arm/boot/dts/ti/omap/omap5-l4-abe.dtsi b/arch/arm/boot/dts/ti/omap/omap5-l4-abe.dtsi
index a03bca5a3584..97b0c3b5f573 100644
--- a/arch/arm/boot/dts/ti/omap/omap5-l4-abe.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap5-l4-abe.dtsi
@@ -109,6 +109,8 @@
reg = <0x0 0xff>, /* MPU private access */
<0x49022000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 24>;
+ clock-names = "fck";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
@@ -142,6 +144,8 @@
reg = <0x0 0xff>, /* MPU private access */
<0x49024000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 24>;
+ clock-names = "fck";
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
@@ -175,6 +179,8 @@
reg = <0x0 0xff>, /* MPU private access */
<0x49026000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
+ clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 24>;
+ clock-names = "fck";
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 9808cd27e2cf..67de96c7717d 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -550,6 +550,7 @@ static struct platform_device *ams_delta_devices[] __initdata = {
&ams_delta_nand_device,
&ams_delta_lcd_device,
&cx20442_codec_device,
+ &modem_nreset_device,
};
static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
@@ -782,26 +783,28 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = {
{ },
};
+static int ams_delta_modem_pm_activate(struct device *dev)
+{
+ modem_priv.regulator = regulator_get(dev, "RESET#");
+ if (IS_ERR(modem_priv.regulator))
+ return -EPROBE_DEFER;
+
+ return 0;
+}
+
+static struct dev_pm_domain ams_delta_modem_pm_domain = {
+ .activate = ams_delta_modem_pm_activate,
+};
+
static struct platform_device ams_delta_modem_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = ams_delta_modem_ports,
+ .pm_domain = &ams_delta_modem_pm_domain,
},
};
-static int __init modem_nreset_init(void)
-{
- int err;
-
- err = platform_device_register(&modem_nreset_device);
- if (err)
- pr_err("Couldn't register the modem regulator device\n");
-
- return err;
-}
-
-
/*
* This function expects MODEM IRQ number already assigned to the port.
* The MODEM device requires its RESET# pin kept high during probe.
@@ -833,37 +836,6 @@ static int __init ams_delta_modem_init(void)
}
arch_initcall_sync(ams_delta_modem_init);
-static int __init late_init(void)
-{
- int err;
-
- err = modem_nreset_init();
- if (err)
- return err;
-
- /*
- * Once the modem device is registered, the modem_nreset
- * regulator can be requested on behalf of that device.
- */
- modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
- "RESET#");
- if (IS_ERR(modem_priv.regulator)) {
- err = PTR_ERR(modem_priv.regulator);
- goto unregister;
- }
- return 0;
-
-unregister:
- platform_device_unregister(&ams_delta_modem_device);
- return err;
-}
-
-static void __init ams_delta_init_late(void)
-{
- omap1_init_late();
- late_init();
-}
-
static void __init ams_delta_map_io(void)
{
omap1_map_io();
@@ -877,7 +849,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
- .init_late = ams_delta_init_late,
+ .init_late = omap1_init_late,
.init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 410d17d1d443..f618a6df2938 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -176,17 +176,18 @@ static u64 notrace omap_32k_read_sched_clock(void)
return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
}
+static struct timespec64 persistent_ts;
+static cycles_t cycles;
+static unsigned int persistent_mult, persistent_shift;
+
/**
* omap_read_persistent_clock64 - Return time from a persistent clock.
+ * @ts: &struct timespec64 for the returned time
*
* Reads the time from a source which isn't disabled during PM, the
* 32k sync timer. Convert the cycles elapsed since last read into
* nsecs and adds to a monotonically increasing timespec64.
*/
-static struct timespec64 persistent_ts;
-static cycles_t cycles;
-static unsigned int persistent_mult, persistent_shift;
-
static void omap_read_persistent_clock64(struct timespec64 *ts)
{
unsigned long long nsecs;
@@ -206,10 +207,9 @@ static void omap_read_persistent_clock64(struct timespec64 *ts)
/**
* omap_init_clocksource_32k - setup and register counter 32k as a
* kernel clocksource
- * @pbase: base addr of counter_32k module
- * @size: size of counter_32k to map
+ * @vbase: base addr of counter_32k module
*
- * Returns 0 upon success or negative error code upon failure.
+ * Returns: %0 upon success or negative error code upon failure.
*
*/
static int __init omap_init_clocksource_32k(void __iomem *vbase)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 1e17b5f77588..ba71928c0fcb 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2209,7 +2209,7 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
return err;
pr_debug("omap_hwmod: %s %pOFn at %pR\n",
- oh->name, np, &res);
+ oh->name, np, res);
if (oh && oh->mpu_rt_idx) {
omap_hwmod_fix_mpu_rt_idx(oh, np, res);
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 385b178314db..3067a4091a7a 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -62,25 +62,23 @@
stdout-path = "serial0:115200n8";
};
- clocks {
- divclk4: divclk4 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "divclk4";
+ div1_mclk: divclk1 {
+ compatible = "gpio-gate-clock";
+ pinctrl-0 = <&audio_mclk>;
+ pinctrl-names = "default";
+ clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+ #clock-cells = <0>;
+ enable-gpios = <&pm8994_gpios 15 0>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&divclk4_pin_a>;
- };
+ divclk4: divclk4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "divclk4";
- div1_mclk: divclk1 {
- compatible = "gpio-gate-clock";
- pinctrl-0 = <&audio_mclk>;
- pinctrl-names = "default";
- clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
- #clock-cells = <0>;
- enable-gpios = <&pm8994_gpios 15 0>;
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&divclk4_pin_a>;
};
gpio-keys {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index bcd2397eb373..06f8ff624181 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -11,26 +11,24 @@
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
- clocks {
- divclk1_cdc: divclk1 {
- compatible = "gpio-gate-clock";
- clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
- #clock-cells = <0>;
- enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
+ divclk1_cdc: divclk1 {
+ compatible = "gpio-gate-clock";
+ clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+ #clock-cells = <0>;
+ enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&divclk1_default>;
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&divclk1_default>;
+ };
- divclk4: divclk4 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "divclk4";
+ divclk4: divclk4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "divclk4";
- pinctrl-names = "default";
- pinctrl-0 = <&divclk4_pin_a>;
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&divclk4_pin_a>;
};
gpio-keys {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index d1066edaea47..f8e9d90afab0 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -20,16 +20,14 @@
qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>;
qcom,board-id = <31 0>;
- clocks {
- divclk2_haptics: divclk2 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "divclk2";
-
- pinctrl-names = "default";
- pinctrl-0 = <&divclk2_pin_a>;
- };
+ divclk2_haptics: divclk2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "divclk2";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&divclk2_pin_a>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
index 3c3b6287cd27..eaa43f022a65 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -173,7 +173,7 @@
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
- gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
+ gpio-ranges = <&pmm8654au_1_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
index 08a3ad3e7ae9..de0a1f2af983 100644
--- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -68,15 +68,17 @@
simple-audio-card,format = "i2s";
simple-audio-card,name = "Haikou,I2S-codec";
simple-audio-card,mclk-fs = <512>;
+ simple-audio-card,frame-master = <&sgtl5000_codec>;
+ simple-audio-card,bitclock-master = <&sgtl5000_codec>;
- simple-audio-card,codec {
- clocks = <&sgtl5000_clk>;
+ sgtl5000_codec: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
+ // Prevent the dai subsystem from overwriting the clock
+ // frequency. We are using a fixed-frequency oscillator.
+ system-clock-fixed;
};
simple-audio-card,cpu {
- bitclock-master;
- frame-master;
sound-dai = <&i2s0_8ch>;
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 7dccbe8a9393..f2279aa6ca9e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -492,6 +492,7 @@
&i2s0 {
pinctrl-0 = <&i2s0_2ch_bus>;
+ pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
rockchip,capture-channels = <2>;
rockchip,playback-channels = <2>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 9da0b6d77c8d..5bc2d4faeea6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -2457,6 +2457,16 @@
<4 RK_PA0 1 &pcfg_pull_none>;
};
+ i2s0_2ch_bus_bclk_off: i2s0-2ch-bus-bclk-off {
+ rockchip,pins =
+ <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>,
+ <4 RK_PA0 1 &pcfg_pull_none>;
+ };
+
i2s0_8ch_bus: i2s0-8ch-bus {
rockchip,pins =
<3 RK_PD0 1 &pcfg_pull_none>,
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index d607ab0f7c6d..9c48fecc6719 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -273,11 +273,9 @@ config RISCV_DMA_NONCOHERENT
select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select DMA_BOUNCE_UNALIGNED_KMALLOC if SWIOTLB
- select DMA_DIRECT_REMAP if MMU
config RISCV_NONSTANDARD_CACHE_OPS
bool
- depends on RISCV_DMA_NONCOHERENT
help
This enables function pointer support for non-standard noncoherent
systems to handle cache management.
@@ -550,6 +548,7 @@ config RISCV_ISA_ZICBOM
depends on RISCV_ALTERNATIVE
default y
select RISCV_DMA_NONCOHERENT
+ select DMA_DIRECT_REMAP
help
Adds support to dynamically detect the presence of the ZICBOM
extension (Cache Block Management Operations) and enable its
diff --git a/arch/riscv/Kconfig.errata b/arch/riscv/Kconfig.errata
index 566bcefeab50..e2c731cfed8c 100644
--- a/arch/riscv/Kconfig.errata
+++ b/arch/riscv/Kconfig.errata
@@ -77,6 +77,7 @@ config ERRATA_THEAD_PBMT
config ERRATA_THEAD_CMO
bool "Apply T-Head cache management errata"
depends on ERRATA_THEAD && MMU
+ select DMA_DIRECT_REMAP
select RISCV_DMA_NONCOHERENT
default y
help
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 12ebe9792356..2c02358abd71 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -431,7 +431,7 @@
};
ss-pins {
- pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_FSS,
+ pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
GPOEN_ENABLE,
GPI_SYS_SPI0_FSS)>;
bias-disable;
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index ce708183b6f6..ff364709a6df 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -139,6 +139,7 @@
interrupt-parent = <&plic>;
#address-cells = <2>;
#size-cells = <2>;
+ dma-noncoherent;
ranges;
plic: interrupt-controller@ffd8000000 {
diff --git a/drivers/cache/Kconfig b/drivers/cache/Kconfig
index a57677f908f3..d6e5e3abaad8 100644
--- a/drivers/cache/Kconfig
+++ b/drivers/cache/Kconfig
@@ -3,7 +3,7 @@ menu "Cache Drivers"
config AX45MP_L2_CACHE
bool "Andes Technology AX45MP L2 Cache controller"
- depends on RISCV_DMA_NONCOHERENT
+ depends on RISCV
select RISCV_NONSTANDARD_CACHE_OPS
help
Support for the L2 cache controller on Andes Technology AX45MP platforms.
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
index 868bc7af21b0..9b2824ed785b 100644
--- a/drivers/clk/ti/clk-44xx.c
+++ b/drivers/clk/ti/clk-44xx.c
@@ -749,9 +749,14 @@ static struct ti_dt_clk omap44xx_clks[] = {
DT_CLK(NULL, "mcbsp1_sync_mux_ck", "abe-clkctrl:0028:26"),
DT_CLK(NULL, "mcbsp2_sync_mux_ck", "abe-clkctrl:0030:26"),
DT_CLK(NULL, "mcbsp3_sync_mux_ck", "abe-clkctrl:0038:26"),
+ DT_CLK("40122000.mcbsp", "prcm_fck", "abe-clkctrl:0028:26"),
+ DT_CLK("40124000.mcbsp", "prcm_fck", "abe-clkctrl:0030:26"),
+ DT_CLK("40126000.mcbsp", "prcm_fck", "abe-clkctrl:0038:26"),
DT_CLK(NULL, "mcbsp4_sync_mux_ck", "l4-per-clkctrl:00c0:26"),
+ DT_CLK("48096000.mcbsp", "prcm_fck", "l4-per-clkctrl:00c0:26"),
DT_CLK(NULL, "ocp2scp_usb_phy_phy_48m", "l3-init-clkctrl:00c0:8"),
DT_CLK(NULL, "otg_60m_gfclk", "l3-init-clkctrl:0040:24"),
+ DT_CLK(NULL, "pad_fck", "pad_clks_ck"),
DT_CLK(NULL, "per_mcbsp4_gfclk", "l4-per-clkctrl:00c0:24"),
DT_CLK(NULL, "pmd_stm_clock_mux_ck", "emu-sys-clkctrl:0000:20"),
DT_CLK(NULL, "pmd_trace_clk_mux_ck", "emu-sys-clkctrl:0000:22"),
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index b4aff76eb373..74dfd5823f83 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -565,15 +565,19 @@ static struct ti_dt_clk omap54xx_clks[] = {
DT_CLK(NULL, "gpio8_dbclk", "l4per-clkctrl:00f8:8"),
DT_CLK(NULL, "mcbsp1_gfclk", "abe-clkctrl:0028:24"),
DT_CLK(NULL, "mcbsp1_sync_mux_ck", "abe-clkctrl:0028:26"),
+ DT_CLK("40122000.mcbsp", "prcm_fck", "abe-clkctrl:0028:26"),
DT_CLK(NULL, "mcbsp2_gfclk", "abe-clkctrl:0030:24"),
DT_CLK(NULL, "mcbsp2_sync_mux_ck", "abe-clkctrl:0030:26"),
+ DT_CLK("40124000.mcbsp", "prcm_fck", "abe-clkctrl:0030:26"),
DT_CLK(NULL, "mcbsp3_gfclk", "abe-clkctrl:0038:24"),
DT_CLK(NULL, "mcbsp3_sync_mux_ck", "abe-clkctrl:0038:26"),
+ DT_CLK("40126000.mcbsp", "prcm_fck", "abe-clkctrl:0038:26"),
DT_CLK(NULL, "mmc1_32khz_clk", "l3init-clkctrl:0008:8"),
DT_CLK(NULL, "mmc1_fclk", "l3init-clkctrl:0008:25"),
DT_CLK(NULL, "mmc1_fclk_mux", "l3init-clkctrl:0008:24"),
DT_CLK(NULL, "mmc2_fclk", "l3init-clkctrl:0010:25"),
DT_CLK(NULL, "mmc2_fclk_mux", "l3init-clkctrl:0010:24"),
+ DT_CLK(NULL, "pad_fck", "pad_clks_ck"),
DT_CLK(NULL, "sata_ref_clk", "l3init-clkctrl:0068:8"),
DT_CLK(NULL, "timer10_gfclk_mux", "l4per-clkctrl:0008:24"),
DT_CLK(NULL, "timer11_gfclk_mux", "l4per-clkctrl:0010:24"),
diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
index 508eab346fc6..a48a58e0c61f 100644
--- a/drivers/firmware/imx/imx-dsp.c
+++ b/drivers/firmware/imx/imx-dsp.c
@@ -114,11 +114,11 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
dsp_chan->idx = i % 2;
dsp_chan->ch = mbox_request_channel_byname(cl, chan_name);
if (IS_ERR(dsp_chan->ch)) {
- kfree(dsp_chan->name);
ret = PTR_ERR(dsp_chan->ch);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to request mbox chan %s ret %d\n",
chan_name, ret);
+ kfree(dsp_chan->name);
goto out;
}
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 12040ce116a5..acc812e490d0 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -334,12 +334,14 @@ if RISCV
config ARCH_R9A07G043
bool "RISC-V Platform support for RZ/Five"
depends on NONPORTABLE
+ depends on RISCV_ALTERNATIVE
+ depends on !RISCV_ISA_ZICBOM
+ depends on RISCV_SBI
select ARCH_RZG2L
- select AX45MP_L2_CACHE if RISCV_DMA_NONCOHERENT
+ select AX45MP_L2_CACHE
select DMA_GLOBAL_POOL
- select ERRATA_ANDES if RISCV_SBI
- select ERRATA_ANDES_CMO if ERRATA_ANDES
-
+ select ERRATA_ANDES
+ select ERRATA_ANDES_CMO
help
This enables support for the Renesas RZ/Five SoC.